Sharing a single checking account with 2 different company codes

Hello gurus,
My client want to use the same bank account number and bank key for 2 different company code, to upload a cashed check file through the t code FCKR. Can anyone give me any solution or we just cant use the same bank key and same bank account number for two different company codes for t code FCKR.

Sorry all,
A couple of corrections:
gail from maine wrote:
Hi all,
I'm a bit confused about this article. I was working with a poster on a question which ultimately led me to this article (as he was using the Disk method described in this article to share one Mac's iPhoto library between he and his wife).
What I'm not getting about any of it is what sort of "multiple user" scenario is this referring to? Is it specifically referring to the User accounts on a specific Mac? So, signing off one user and then signing on another?
The reason I ask is because both my husband and I have Macs, and he is always signed on to his Mac, I'm always signed on to mine. We have a bit more complicated set up in terms of syncing, because our iTunes library is housed on his computer and our iPhoto library is housed on mine. But, bottom line, when I sync my iPhone or iPad to iTunes, I do it on his computer with him signed on (most of the time on both the computer and iTunes), and when I sync his iPhone photos to iPhoto, I do it on his my computer with me still signed on. We have both libraries shared completely, with the option to sync different parts of it to our different devices.
So, in a situation where you are not needing to sign off the "primary" user of a Mac in order to update or sync your devices, does the article even apply?
I just want to get it straight so I can help this poster out with the correct information.
Thanks,
GB
Sorry about that....
GB

Similar Messages

Project stock exist in a plant and WBS but with different company code

Hello,
As I know I can not create a PO in company A, but was assigned to a WBS maintained in company code B. The system will check if the WBS getting the same company code with the PO, and pop up the error message if the company code was differect.
But seems the project stock could exists in a plant but assign to WBS was maintained with different company code. For example, A material stock was in plant A assigned to company code A, and it is also assigned to WBS belong to company code B.
Any one know it is correct?
Thanks!

I knew crossing company code to assign WBS element to PO is not allowed since i got the error message, and I think it's reasonable, cause the expense from the project PO should post to the same company code through the WBS element.
But why for the inventory crossing company code is allowed? The stock in plant A belong to company code A, was assigned to WBS element B belong to company code B. That means the inventory is in the GL balance of company A but under the profit center belong to company B. How to understand it? I think it's wrong

Difference between Group A/c and Chart of Account with serval Company Code

Hi Friends,
Please explain the term chart of account with serval company code and also group a/c.
Thanks and regards,
Dev

Hi Mahendra
The Chart of Accounts is a list/directory of the G/L acounts maintained in the company. This COA can be used by one or many company codes.
For e.g Co code A located in Delhi and Co code B In Mumbai may use the same COA for reporting as well as consolidation purpose.
Group COA is maintained when there are more than one COA (e.g country-specific and operating COA) being used in the company. In this case the COA maintain alternative account numbers to the same account for automatic updation and consolidation.
I hope this helps.
Regards
Kavitha

MAM Order - Two items having Booking Units with Different Company Code

MAM order created with 2 Line Items
Booking Unit in each Line Item belongs to different Company Code .( Internal Order within each Booking Unit has different Co. Code )
After billing individual Line Items ,Two separate Billing doc. will be created for this Order
Each Billing document should be posted to different Co. Code depending upon Co. Code in Internal Order of respective Booking Unit
TS - 9350801900

Dear Chandramohan ,
Thanks for the reply .
But the solution given by you will just change the message class .I wanted to post Two different Line Items within a single MAM Order to different Co Codes after billing .
Scenario is that SOrg1 assigned to CCode1 & SOrg2 assigned to CCode2 .
       Booking Unit BU1 has Internal Order belonging to CCode1 & BU2 has Internal Order belonging to CCode2
Now MAM Order1 created with SOrg1 having Two Line Items with BU1 & BU2
                After Billing ,Two Billing Docs will be created for each Line Item .
                 Both Billing Doc will be posted to CCode1
Now MAM Order2 created with SOrg2 having Two Line Items with BU1 & BU2
                After Billing ,Two Billing Docs will be created for each Line Item .
                 Both Billing Doc will be posted to CCode2
Means even if Two Line Items are created within a single MAM Order having BU of different Co Codes ,after billing both Billing Docs will be posted to Co Code of Sales Org at Header level .
As per the requirement ,irrespective of header Sales org , Line Items needs to be posted to respective Co Code of Booking Units .
Tds ,
TS

How to prevent settlements from AE to wbs with different company code

Hi gurus,
i'm currently facing a problem regarding settlements from activity elements to wbs above.
we have one controllign areas with various company codes.
For some projects, we have wbs assigned to company code A and activity elements assigned to Company A and B.
We have an automatic settlement rule generation so that we settle all activity element costs to wbs. But, for activity elements assigned to company B, we don't want to settle the costs, we want to go through a sd/mm invoicing between the two companies.
How can we prevent the settlement to take place, apart from manually removing the settlement rule for each activity element?
can we put a validation rule that check that whenever the company code in the wbs is different from the one in the activity element, then the settlement doesn't take place? or remove the automatic settlement rule generation and use cjb1 to generate settlement rules only when an activity element as the same company code as the wbs above. would it be possible?
would the WBS_SETTLEMENT_RULE BADI or badi proj be of any help?
Any help is welcome.
regards
tim
Edited by: Tim Ursulet on Jan 22, 2009 5:29 PM

Hi Tim,
The transaction CJB1 or CJB2 creates the settlment rules for WBS only, therefore the transactions and Badi WBS_SETTLEMENT_RULE BADI are NOT relevant for the settlement rules of activity and elements at all.
For the settlement rules of activity (and elements) the default rule is inserted, as soon as the user navigate to the settlemenent rule overview screen, if the activity do not have the settlement rule at that time. I am not sure, if there is BaDi or substituation to prevent the system apply this default rule in certain case. Other alternative is to specify the objects during settlement, e.g. using selection variant with the company code.
Kind regards,
Zhenbo

EXTERNAL OPERATION in a production order with different company code plant

Hi,
in my case i am having a production order with 4 operations.
0010 milling
0020 winding
0030 cutting
0040 milling
among this opearion 0030 i want to do it in a plant which is assigned to different company code than mine.
in this case whether i should proceed with PP01 Control key with opearion plant as that plant which is lieing in diffent company code or
i should specify PP02 control key saying that plant as an external vendor for me and do PR and PO for that service .
which should i follow for my case and how cost gets updated .

Hi,
For different company code, u have to specify PP02 in the routing for external vendor. In PP02 control key indicator must be set in external opn.
Before that create purchase info record.
Enter subcontract info record in routing.
after running MRP , convert the PR to PO.
Send the material by MB1B by 541 mvt
Receive the material by MIGO by 101 mvt.
Regards,
Raja sd

Creating Workflows for a Corporation with Different Company Codes

Hi,
We have just done a roll-out for Company A which is part of a big corporation (group of companies).
The system version implemented is ECC 6.0 with modules (HR,MM,FI,DBM)
I have implemented and rolled out several workflows (Leave,PR,PO, Payment approval)for Company A and am now expected to do the same workflows for Company B,the business processes as per flowcharts remain the same as for Company A.
Company A uses company code 1000, while company B will use company code 2000.
Users in Company B will log in to the same PRD servers.
Some approvers of workflow in company A will be responsible for some workflow approvals for staff in company B though HR have completed implementing an org structure for company B.
Is it possible to use the same workflow templates by saving them in a different name and change the agents to reflect company B org,if so how do I go about it?
In future we will also roll-out to Company C.
What is the best way to do it and save time as well.
Thank you.
Missa

Hi
Consider a scenario like EMPB who belongs to CMP B has applied a leave and EMPA manager of EMPB who belongs to CMP A,
Now in order to send the leave request for approval to EMPA you can define or create a rule from PFAC transaction. in such a way that
1. First try to get the initiator details like his personnel number.
2. Once you have the Employee number , by using it you can read hi Org Assignment details from PA0001 to get employee sepecifc compnay code.
3. BAsed on the employee group and sub group you might have to decide who is manager I hope this would be defined already in the org structure.
4. Once you know who is the manager , get his position details and from it get holder and his communications info from PA0105.
IN this way if you define a rule by calling a function module. You can make use of the same workflow. but based on the initiator details you need to dort out the manager.
The simple way is to define and impement the Rules dynamically to fetch the agents based on the Personel are/sub are and employee group and sub group.
Regards
Pavan

How to create group bom for multiple plants with different company codes

Dear all,
In my current scenario we have 5 Company codes with a plant with each company. The same kind of materials exist in all the 5 plants, so what i want is when i create any BOM, that BOM has to extend in all the company codes, as with GROUP BOM i can able to extend the same in only one company code.
So how to do this?
Thanks in Advance
Bhushan

For that first extend all the materials to all the plants... In one plant create a BOM for the material..
In all other polants in CS01, click COpy from .. There you mention the matreial and the plant in which the BOm is alerady available..
karthick

Intra company transfer with different company code

Hai gurus,
i have the following scenario:
1) i have company 'A' under company code 1000( purchasing plant) and it has 10 depos namely( A1 TO A10).
2) i have another company 'B' under company code 2000( manufacturing plant) .
3) under company code 'B' it has three manufacturing plant namely B1,B2 and B3.
4) Products x,y and Z are produced in all three plants namely B1,B2 and B3.
5) company 'A' receives the forecast for the year and give the requirement for all the three products(X,Y and Z)
    to company 'B'
6) Based on the input from company 'A' input company 'B' produce and sell all the final products(X,Y and Z) to
    company 'A'.
7) company 'A ' and 'B' comes under same management and control area.
8) How to map into sap and how the requirement will be transferred from company' A' to 'B'.
     ( currently requirement is passed between executives of two company in the meeting).
9) some times the company 'B' has to deliver the final product to any of the depos( A3 or A6) which is
      situated near Company 'B' on instruction from company 'A', but the payment is paid only to company
      'A' .This is done to avoid transit delay and transportation cost.
waiting for positive reply.
regards,
sekar chand - pp
Edited by: sekar chand on Mar 13, 2009 8:07 AM
Edited by: sekar chand on Mar 13, 2009 8:15 AM

Hi ,
For such requirement where there is intercompany transfer , use the standard EDI IDOC . For the documentation Please go through this link http://help.sap.com/saphelp_nw04/helpdata/en/cf/ab3827940311d295e600a0c9306667/frameset.htm .
The scenario you will be mapping will be
1. Company A raises PO on Company B and send the PO to comapny B through EDI IDOC output type NEU type 6 (EDI). This will create SO in company B.
2. Once company confirm the date for delivery then u can pass confirmation to PO using output type BAOO.
3. Once u do pgi of outbound delivery u can pass this information through output type LAVA. This will create inbound delivery on purchase company A.
4. Once u relase billing doc u can send this to purchase company using RD04 . this will create vendor invoice on purchase company.
In the link all the information is given about the partner type , port type, message type and output type .

Put users into different company code.

Hello experts,
I need to assign users to different company codes. It should be like that: user can do some transactions on company code X but cannot on company code Y. How can I do that? Is it even possible?
Thank You.

Hi Janek
Please contact your SAP BASIS or Security expert. In the Role concept Rahul explained above, each Role needs to be assign some Org level values. One of these mandatory Org level value is company code. So, You get roles created with different company codes at org level and assign them to the relevant users.
So, the users are assigned roles, which have access to specific company codes and so the users can post or access only those.
Regards
Sowmya

Single Purchase Order for different Plants of Different Company Codes

Hi Experts,
I have a scenario, My Client has 3 Company Codes (1000, 2000, 3000 )
Company Code 1000 has 2-Plants    ( A001 and A002 )
Company Code 2000 has 1-Plant      ( B001 )
Comapny Code 3000 has 3-Plants   ( C001, C002, C003 )
All these 3-Company codes has centralised purchase organisation.
My Client requirement is to raise a single purchase order for external vendor, for all the plants A001, A002 which is in one company code and similarly in same Purchase Order for B001 plant which belongs to 2000 Company Code and Similarly for same purchase order for C001, C002, C003 plant which belongs to 3000 Company Code.
1)Is it possible to raise a Single Purchase to External Vendor for plants of Different Company Codes ?
2)Does it affect the accounting document ?
3)How to inward and where to inward these goods ? with respect to plant wise ?
Please Guide with Valuable inputs.
Thanks in Advance
Best Regards
Javeed
Best regards
Javeed Ahamed

1) How about Profit Centre ? We have Framed each Profit Centre with respect to Plant
Why should there be a problem?
2)In Case of Migo does we have to be careful and do stepwise MIGO with respect to different Plants ?
of course people have to be careful when performing transactions.
if you have multiple items in a PO then you can easily receive all items in one go. So people have to careful and need to check if they really received each of the PO items. Especially if people have authorization for many plants, then the user who is usually performing the receipts for plant A can easily post the receipts of plant B too.
3) How to Process MIRO ? Can we process Partial MIRO"S with respect to Line-items of those particular Plants ?
MIRO allows to post the invoice like it is send to you from your vendor. If it is just for a part of your PO then this is just a fact and MIRO allows to post this kind of invoices too.

Using Same Bank Account for two different company code

Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

The system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon

"Account Assignment objects have differing company codes"

Hi,
We have parked the document through T.Code : MIR7 & now we want to post the same using the correct GL A/c.
When we try to post the document we are getting error like "Account Assignment Objects have differing Company Codes"
Can you please help me
Thanks
Ravi kumar

Please check in the document if it contains diferrent account assignments like both cost center and internal order. In this case both cost center and order must belong to same company code.
If you find the document fine, then solution is to change the error to warning using T Code OBA5 and application area KI (I assume). You should be seeing application area as part of your error message number which is usually first 2 characters.
Regards
Sreenivas

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Sharing a single checking account with 2 different company codes

Similar Messages

Maybe you are looking for