Sharing Files Over Network and computers not showing up in sidebar

I am trying to figure out how to share files over the network. Now when I click onto the computer in my shared items, I do not get access to the home folder that I used to see. Instead, I am getting a folder image with the user name below it, but it says Sharepoint. However, when I click on the folder I get another folder that says dropbox with a down arrow. However, when I click on that it says it cannot be opened because I do not have privileges.
What happened to being able to being able to get access to the home folder from the users on the computer that you are trying to retrieve files from.
Are there settings I need to adjust to allow me to get access to the files on the other computer.
The other computer is an iMac G5.
My next issue is that my wife's iBook G4 doesn't even show up in the shared items in the sidebar.
Again, are there settings on this computer that have to be adjusted.
Thanks in advance.
Russell
Message was edited by: Russell Massey

Hi Henry, and a warm welcome to the forums!
While you may get help or a solution here, It's quite acceptable to start a new topic of your own, certainly feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=752
It asks me to loggin I dont remember ever setting a login and password for it.
You need to add a User to the PC, or try with the PC's username & PC's Password.
My Main Problem is that my PC can see my Macbook...
On the Mac, did you enable Windows Sharing in System Preferences>Sharing>Services ?
I want to be able to use my printer that is hooked up to my Windows 7 PC with my Macbook
That has to be set first on the PC.

Similar Messages

Unable to access shared files over network after period of time.

First off, I don't think that this issue is related to our router, but I have been searching for a fix and can not find one. We have a WRT54GS. Now, on to our issue:
At my work, we have a small network with computers sharing files between the others. I have attached a network diagram to help explain this better.
Our Win7 machine is our main computer that shares an external hard drive with much information that the other computers need to access. What we have noticed is either after a sleep, or even a period of time of say, 2 hours, those files are no longer able to be accessed. The Win7 machine is still sharing them, but the WinXP machines are unable to access them anymore and my Mac can see the computer is unable to connect to the folders. I have gone and attempted to get some help over at Microsofts site but that was a fail. Here is the link to the forum post there. http://social.answers.microsoft.com/Forums/en-US/w7network/thread/f0a2e8d6-f75a-41d7-a280-c6f3adbffa...
A member there gave me this:
The Network connection is probably not resuming after sleep.
First try this, http://www.ezlan.net/Win7/power_save_win7.jpg
It is in the Network Connection Properties under the Network card configuration.
If it already checked this way, or does not work after checking, the Network card has to be taken out of the computer's Power Saving loop, and stay on all the time.
Otherwise, Updating the Card with the latest OEM drivers (downloaded from the computer's support site) might help too.
On a rare occasions, some cards might be "Quirky" in this regards and need to be replaced.
--I would like to add that this DOESN'T ONLY happen after sleep, it also happens after a time of being used.
I attempted those and no luck. This problem is still occurring and the only way we can fix it is by restarting the Win7 machine. But even if it is being used, we have no idea when those files are unable to be accessed.
*I will add that the Win7 machine is still able to access the other computers when this problem occurs if that helps.
**The Win7 machine is a Dell T3500 running Windows 7 64bit. I can provide specific hardware if needed. The drivers are all up to date as of yesterday.
***So upon looking in the Windows XP machine, both of the folders from the Win7 machine disappear once this problem occurs in the My Network Places folder. And one folder is on the internal drive, one is on external. The computers are in this situation now where I am unable to access them. The Win7 machine can read and write from the other computers, but the other computers can even see the Win7 Machine.
****All the connections are wired and are not using the wireless.
Thanks for any help that anyone may have for me!
Steve
Network Map > http://scubasblog.com/network.jpg
Dell Support Forum with same issue I posted >> http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19337620/19716797.asp...

It sounds like there is incompatibility issue with XP and Win7. To isolate this, do you have another Win7 machine? Try to add it to the network and check if the shared drives are accessible after sleep. If you don't have another computer, try virtual machine and create a Win7 system.
Update your LAN card driver from the manufacturer's site. Don't use the driver from windows update.
Lastly, does this happen to your XP machines? Like, one of the XP machine sharing a folder and falls asleep. When it wakes up, does Win7 machine can still access the shared folder?

Accessing shared files over network

I am having some problems with a couple of database files that I access with a Java program over network. Different computers running this program all need access to these files, and my question is if anyone know of a good way to make sure that only one user have access to these files at the time. There is no server software running were the files are stored, they are simply reached through file sharing. Currently I am creating a lock file indicating that someone is editing the files, however if I am unlucky 2 users create that lockfile at the same time and then both get access to the file corrupting it. Anyone experienced this and know of a nice solution to avoid it?

I am having some problems with a couple of database
files that I access with a Java program over network.
Different computers running this program all need
access to these files, and my question is if anyone
know of a good way to make sure that only one user
have access to these files at the time.Use a database server instead.

Copy files over network and preserve original date modified/created

This problem originally cropped up when importing photos into iphoto. I copied all my pics across the network and stored them locally then imported them into iPhoto. Problem was, any pics that did not have EXIF data were sorted by iPhoto, by date created...which was the date they were copied to the Mac.
I got around that by trashing the iPhoto Library, then importing the photos over the network. The dates on the pics were correct on the Windows machine till the copy process changed them.
is there a way to copy across the network and keep all the file attributes as they are on the original..An archive type feature.
I had thought of RsyncX, but have not used that yet from within the Mac.
Is there a way from within Finder to copy and keep attributes? or a third party app?
Neil

zip the folder with your pictures (control-click on it and choose "compress folder"), copy the zip files to the remote computer and unzip it there. this will preserve the modified and created dates.

Every time I launch Firefox 4 it opens 3 or 4 blank windows, no longer opens the tabs from the previous session and does not show my bookmarks sidebar.

I have to manually close the extra windows and restore the tabs from the previous session, and reopen the sidebar. In disgust I uninstalled Firefox 4 and reinstalled 3.6. Everything works fine in 3.6. Looks to me like Firefox 4 has many major bugs and is not yet ready for prime time. I'll stay with 3.6 for now.

This can be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

Files copied as .lnk files to usb and does not show up in Windows

When I copy files from the MBP to a USB disk, instead of copying the files as is, the Mac converts the files into a .LNK file, which then shows up as "shortcuts" rather than the copied file in Windows. Why is this?

same here.. it happened after installing Lion and updating iTunes
My nano does not appear on iTunes or desktop, however it charges.
iPod nano 2nd Gen
Mac OS X Lion 10.7
iTunes 10.4
please don't tell me that Apple added my lovely nano to Black list !!

WSUS and computers not showing up

Hello I installed WSUS 3.2 and no computers in the domain are showing up? Any idea's

Hi,
First, what is the version of your WSUS clients? Is your WSUS server patched?
http://support.microsoft.com/kb/2734608
Then check GP result, did your WSUS clients get GPO correctly?
Or manually check the registry key.
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\WUServer HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\WUStatusServer
Make sure the two registry key point to your WSUS correctly.
Check connectivity between WSUS server and clients. Port 8530 by default in windows server 2012, confirm your firewall allow the traffic. Ping, telnet
will help address network issue.
Hope this helps.

Sharing Files between Mac and PC over a Network

Greetings,
I have recently made the switch to the Mac, and I have been so pleased with it ever since! I am getting married soon and my wife-to-be has a Windows XP desktop machine. I have been reading up on the different options on sharing files, and I want to ask if someone with experience can confirm what I think I have discovered.
1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
Thank you for any help that you might offer.

1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
You don't need Macdrive for sharing files over the network, macdrive is only needed for a PC to read a Mac formatted Hard drive that is directly connected to a PC i.e Firewire Drive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Yes you can write to a windows sharepoint on a mac this would be limited to their home folder unless you setup other permissions.
To setup windows sharepoints your best using a shareware utility called sharepoints
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
It does not matter what format hte pc drives are if your sharing over a network you only need to know about formatted drives if they are directly connected to the computer i.e firewire, or usb drives.

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Fax and scan not showing network contacts

Was bumped from the office Q/A forum
http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/fax-and-scan-not-showing-network-contacts/4bf79dbd-a2cc-4a96-a8cd-bbdb01746a5c
Just going to jump right to it, let me get the picture painted
windows 7 x32 office 2010 (also tested on office 2013
shared contact book from a networked pc
I open the fax and scan click to and/or contact buttons the shared contacts show up just fine
setup and activate an email account Imap/POP
repeat the process and only the outlook contacts show up
remove the email profile and the contact are back
all pc are domained
i have 5 other pc that don't have this issues
4 win7 x64 offices 2013
1 win7 x32 office 2013 (hosting the address contacts)
From what I can find most are having the opposite outcome that the outlook contacts are not showing up.

Hi Sean,
As per the description, I understand that a shared contact book cannot show in Windows Fax and Scan. There is not so much we can do on Office side, I'd suggest you check on Windows client side.
This is the forum to discuss questions and feedback for Microsoft Office client. I would suggest you to post in the forum of
Windows 7 as Windows Fax and Scan is a Windows feature:
https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty

Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty.Anyone know what can be done?

You are welcome. Glad I could help/
Allan

Shared printer from a pc does not show up on my printer list.

I have a macbook air and the shared printer from a pc does not show up on my printer list. I know it's available on the network as I have a another pc that has access to it. The Mac did find it at one time but it has since disappeared. Appreciate help.
Rich

Can you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?

Network drives do not show up on Desktop or in Sidebar

I have a user who is experiencing a weird problem. When they connect to a Windows server over our LAN, the server does not show on their desktop, nor does it show in the sidebar.
I have checked the boxes in Finder/Preferences to show network drives on the desktop and in the sidebar, but the network drives do not show up.
I have reproduced this on another Mac, a G4 also running 10.5.8 .
The windows servers do appear in Go/Network, and the user can connect to them, but they still don't show up on the desktop or the sidebar.
Does anyone have any good ideas about this?
Thanks in advance!

Templeton, I'm sorry if my message wasn't clear, but I have already tried that.
I'm beginning to wonder if there might be some issue with this in 10.5.8, since this works on the Macs here with Snow Leopard, and it used to work when we had Macs on earlier versions of OS X.
Again, I'm open for any ideas on this.

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

Sharing Files Over Network and computers not showing up in sidebar

Similar Messages

Maybe you are looking for