Sharing Handling Units between Inbound and Outbound Delveries?

Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit.  Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO). 
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it. 
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer. 
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery? 
Is EWM Cross Docking the best way to accomplish this? 
Are there other proven approaches?
Thanks for your time and help.
-Ron

hi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the  material
like FG  material and tray
identification number controlling the handling unit numbers.
with regards
dinesh

Similar Messages

  • Customer order unit - EDI inbound and outbound sales documents

    Is there a standard method to store a customer's order unit of measure?

    Standard set-up assumes seller dictates sales order unit per material.

  • Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

    Hi,
    I am currently working on a project with the following requirements
    1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
    2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
    In otherwords, a inbound and outbound integration.
    What I have tried so far and my results:
    Scenario A
    1. Enabled MTOM on SOA composite by attaching wsmtom policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    Scenario B
    1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
    Result for Scenario A with file size less than 1 MB:
    Flawless execution with sub-second response times
    Result for Scenario A with file size of 8MB
    First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
    Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
    Result for Scenario B:
    The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
    I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
    I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
    Thanks
    regards,
    Johnny

    I think this is due to the underlying mechanism of weblogic classloading..
    You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
    1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
    2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
    3- Get the oracle support admins at your client site to approve your request for support access.
    4-Once they approve , you can access the support site and raise service requests.

  • Need IDOC inbound and outbound programs

    hi,
    i am new to xi.
    i want IDOCs , inbound and outbound / function module  programs for    PURCHASE ORDER
    and GOODS RECEIPT.
    ex:  BD10 for material master (matmas01).
    thanks and regards
    v ijender

    for purchase order.
    ORDERS / ORDERS04
    ORDCHG / ORDERS04
    ORDRSP / ORDERS04
    Programs
    RBDMIDOC – Creating IDoc Type from Change Pointers
    RSEOUT00 – Process all selected IDocs (EDI)
    RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
    RSARFCEX - Execute Calls Not Yet Executed
    RBDMOIND - Status Conversion with Successful tRFC Execution
    RBDMANIN - Start error handling for non-posted IDocs
    RBDSTATE - Send Audit Confirmations
    FOr testing you can use WE19.
    and also check the below link
    http://www.erpgenie.com/sapedi/message_types_masterdata.htm
    regards
    kummari

  • Weight from Handling Unit not copied into outbound delivery weight field.

    Hi,
    We create handling units with hupast and with a weight interface. If we select the HU in the outbound delivery, we need the total weight of all HU displayed in the outbound delivery. This is not happening. The total weight which is shown is the weight of the material master.
    How can we put HU weight in the outbound delivery?
    Thank you,
    Eric van Zundert.

    hi Eric,
    you habe to do this with a user exit.
    In the deliveries, there is only one good userexit at the time save dcoument prepare. -- there is a oss - note for it.
    I copy at every save the sum of the HU-weights in the fields of likp.
    Additionally at time of goods out - boocking, i collect the LIKP-weight upon all positions of the lips, so that the sum of lips-weights will give the likp-weight.
    You need to do this, because in invoice, the weight is taken as sum of the positions and the following processes of export will also take the weight of the invoice-position.
    hans

  • IDOC Inbound and Outbound

    Please let me know How to handle IDOC inbound and Outbound preferably with example. I am new to it.

    hi,
    your question is very broad,
    start reading continue from there...
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/19/3cf334c20ccc52e10000009b38f83b/frameset.htm">Doc Interface: EDI Application Scenarios (BC-SRV-EDI)</a>
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/dc/6b8a4943d711d1893e0000e8323c4f/frameset.htm">IDoc Interface / Electronic Data Interchange (BC-SRV-EDI)</a>
    An example:
    inter company invoiceing:
    the SD invoice has an output type (INVOICE01) that sends an Idoc that creates the mm invoice (invoice verification)
    for more data see the links above
    good luck

  • Why do we use inbound and outbound plugs in abap webdynpro?

    hi all,
    why do we use inbound and outbound plugs in abap webdynpro?
    Thanks

    Actually we have 2 types of plugs
    1.View plugs
    2.Window plugs/Interface Plugs
    plugs are for navigating one view to the other and also you can pass the parameters along with the plugs.
    Outbound plug is to navigate from one view to other view,also we can pass parameters along with the plug.
    Inbound plug is like event handler/receiver of the outbound plug.
    Using window plugs we can call other Web Dynpro applications.for more information check this link.
    http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
    Thanks
    Suman

  • Redundancy Design Inbound and Outbound

    Please have a look to attached diagram.
    I have 2 parts A & B. Part A already exist and running. We are planning to add Part B as show in the diagram.
    Part A consists of ASA 5540 and 2921 as Edge Router and Microsoft TMG as Web Proxy for internal users
    All other traffic routed to ASA. ASA handles NAT and ACL's
    Objective of adding Part B is to have Redundancy Inbound and Outbound. However, firstly I  want to focus on outbound redundancy then I will move to Inbound Part.
    After adding Part B, TMG will have 3 NIC's. 2 NIC will be connected to ASA's and 1 to internal
    For Web proxy fail over I will configure TMG ISP-R feature. But my concern is for other traffic
    Therefore, please can someone help me what are best possible ways I can use for outbound failover.
    Thanking in advance. I appreciate the help

    Any help, please ?

  • Defining INBOUND and OUTBOUND

    Hi Every One,
    I have a very small question.
    How do we define INBOUND and OUTBOUND?
    I got this doubt, when I read some material, sometimes the directions (INBOUND and OUTBOUND) are told as per application systems which participate in message exchange? Sometimes the directions are told as per the XI integratin server.
    Which of the 2 methods stated above is correct?
    I hope I am clear in what I wanted to convey.
    Bye, tschüs, adeu
    -Naveen.

    Hi NaveenKumar,
    You use a message interface to describe a platform-independent or programming-language-independent interface, which you want to use to exchange messages between application components using SAP Exchange Infrastructure. Depending on the communication parameters defined for a message interface, it can either have the task of sending a request (outbound) or receiving a request (inbound).
    An outbound interface sends a request message that is only used to make a communication party aware of data sent, without waiting for a response message. In the case of the latter, we also refer to publishing interfaces.
    An inbound interface receives a request message that you reply to with a direct response message or whose data you can process in the system without a response.
    I guess i have helped you solve your confusion.
    Regards,
    abhy

  • Logging inbound and outbound connections through my Linksys router

    Hi There,
    I have a  Linksys wireless router (WRT54G series) that I use to connect to the internet with my cable modem. I would like to be able to configure my home network to log inbound and outbound connections through my router. 
    My router, which I bought brand new a couple of years ago, provides some very basic logging through its administration interface.  I can view a current log of very recent (within the past couple of minutes) inbound and outbound connections/traffic.  However, I would like to be able to configure my network to log all inbound and outbound traffic for at least 1 or 2 days and have this log saved somewhere so I can retrieve and review it at a more convenient time.  I haven't been able to figure out how to do this with my current Linksys router and would like some help in configuring my system.
    Is it possible for me to configure (perhaps with a firmware upgrade or even by replacing my older Linksys router with a newer one) my router to continuously log a day or more's worth of inbound and outbound connections?  If this is possible, what changes do I need to implement?  Does Linksys offer a wireless router that has more sophisticated logging capabilities?  What is the longest log period that I can create with a Linksys router?
    If it's not possible to create such a log with my router, then what other components would I need to log this information?  I've thought about setting up a Linux server with two network cards installed to act as a gateway between my router and cable modem which will log traffic.  Would this be a good strategy to implement logging?
    Thanks in advance.
    Tom
    Message Edited by   on 07-28-2007 07:44 AM
    Message Edited by   on 07-28-2007 07:50 AM

    well...the router's in-built log will only provide basic information about the incoming/outgoing log . So, it will be a good idea to install a separate log viewer .....

  • How to add Total Quantity in Inbound and Outbound Delivery screen

    Hi,
    I want to add Total quantity field in Inbound and Outbound Delivery screens.
    In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
    in Change Layout--> Display, i didn't see any totals displayed.
    Please help me on this?
    Regards
    Bhuvana

    Hi
    If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
    Regards
    Eduardo

  • My home sharing continually fails between mac and apple tv 2.

    my home sharing continually fails between mac and apple tv 2, even during watching a movie.  I go to the mac to re-turn on home sharing but it is still on.  Any tips?  I also have to turn off and back on at the mac every time i switch on my apple tv.

    Sharing Stopped working again over night.
    I went to Apple Support Artical TS2972
    As soon as I did this Home Sharing started working
    http://support.apple.com/kb/TS2972
    Firewall Section
    5. Check Firewall Settings
    If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
    In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
    If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
    For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
    Block all incoming connections
    Allow only essential services
    If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
    It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day.  This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
    Tommorrow will be the true test.

  • SAP inbound and outbound delivey in single shipment document

    Hi
    We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
    Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO            2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
    Please advice ow this can be achieved in SAP.
    Best Regards
    Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

    It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
    http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
    Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

  • To Monitor inbound and outbound messages for ECC 6.0 business system

    Hi Guys,
    I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
    XI server is on a different system.
    I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
    And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
    When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
    Thanks,
    James.

    James,
    Go to SXMB_MONI in your sending system.
    Here you will find a message ID fro your Message.
    Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
    Likeiwse it can be traced in the target system as well.
    The basic point,  The messages will have same Message Id on your R3 and on XI.
    Regards
    Bhavesh

  • Single Function module to create inbound and outbound delivery

    Dear Frens,
       I would like to know how VL10A is creating a deliverty document in background mode.
       otherwise can anyone help me with a single function module or BAPI or BADI which creates both
       inbound and outbound delivery.
    Regards
    Priya

    Hi,
    Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
    For creating a delivery wrt PO u 1st need to have a sales order i guess.
    Regards,
    Amit

Maybe you are looking for