Sharing printer between Mac and Windows

I have a printer connected to my TC, which is used a router. I have two Windows machines connected to the TC, one wired and one Wifi. How do I accesss my printer from my Windows machines ?

Download and install windows version of bonjour.

Similar Messages

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

Sharing files between mac and windows

Hello, I have recently purchased a new mac computer and I would like to transfer files from my old windows computer onto this new one and vice versa. I have tried using an external hard drive to do this, but I found that it can only be formatted to one OS at one time. Does anybody have any ideas of how I can accomplish this? Thank you so much for your help everyone!

I'm not clear as to the current format of the drive. Since you say it is working with MacDrive I am assuming it is currently NTFS. You also say this is for a "new computer" so is this really a Leopard OS computer, making this a Leopard OS question? There's differences in the capabilities of the different systems.
As for MacDrive, if it works and it's the only program then you'll have to pay for it. I'd say if you're just using it this once for this one application you could probably buy a used drive for $50 to allow you to clear some files off the one you want to use and reformat it. Drives formatted to FAT32 can hold files up to 4GB in size and work with both Mac and Windows. Unless this is for video I don't see a severe restriction to reformatting to FAT32 and using that.

Sharing Files between Mac and Windows XP PC

I have an small office with three computers. There is a new Mac that basically acts as the server. There is a shared folder on the computer. The other 2 computers are PCs. All permissions have been set on the Mac. The other 2 users are set as Administrators on the Mac and have the ability to Read and Write. The other 2 users can access the files, but they are not able to make any changes. The shared folder has may sub folders. Any ideas?

huh, i used migration assistant to create a user with all my old data. now i have 2 users. anyway, i was putting the old data i wanted (i plan to wipe out the old user) into the shared folder...and it was working fine. all of a sudden, i put files into the shared folder, and when i log in as the new user, i can't use the file. won't give me access.
i've enabled file sharing, the files and folders are marked as shared, and well...it seems like file sharing is broken.
...ideas?

Itunes Shared Library between Mac and Windows isn't sharing videos properly

Hi, I'm a bit new to the mac world, but I'm the proud owner of a new macmini. I also own a Windows 7 machine.
My problem is with the Itunes Shared library. Itunes 10 on my mac is set up to share everything, including podcasts. I can see these from Itunes 10 on Windows, and I can play music (and audio podcasts), but video is hit or miss.
Videos downloaded from Itunes U tend to work, lectures and stuff.
Video podcasts (also downloaded from Itunes Store) and other videos don't work at all. Itunes just doesn't play the video, and doesn't even launch the "black screen". The timer remains at 0.00.
On the other hand, sharing videos from the PC to Mac works well, i.e. my mac can see the contents of the itunes shared library on Windows and play videos. It just doesn't work the other way around.
Thanks for reading and I hope this problem can be fixed.

Woops!
Here you go:
http://discussions.info.apple.com/message.jspa?messageID=10923818

Syncing between mac and windows

I have an issue where I have created files in Adobe Draw (and previously in Ideas) which I have then saved to the Creative Cloud. I open these files in Illustrator on my Mac, save them back to the cloud then open them on a Windows PC. When I save these files on the PC, I get the Unable to Sync Files error message. I have gone through these solutions Error: "Unable to sync files" but no solution applies. If I create a file on my PC, it syncs fine. Is there a known issue when sharing files between Mac and Windows? I can save the files to Dropbox or email them and I don't have this issue. Thanks

Hello,
Would you be able to send me your log files so I can better see what might be causing this issue issue. I will need Logs from both your Mac and Windows machines please.
You can find your log files at...
Mac:
/Users/<username>/Library/Application Support/Adobe/CoreSync
Windows:
C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
please upload them to Creative Cloud and send me a link to the logs at [email protected]
Thanks
Warner

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

Transferring keyboard shortcuts between Mac and Windows

I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Problem setting up shared printer between PC and Mac with 10.6

I am trying to setup a shared printer between my Mac and PC. I have a HP K80 attached to my PC (which has Vista Home Premium). I have a Macbook pro with 10.6. I have shared the printer on the PC side. From the Mac I have added the printer via Windows Printer sharing, but for some reason I cannot print to the printer. Everytime I try to print, the job just pauses. Is there something I am doing wrong?

Thanks I installed the gutenprint drivers and tried this, and now all working:
http://guides.macrumors.com/Printingto_a_Shared_PCPrinter
Printing to a Shared PC Printer
This article describes how to print from Mac OS X to a shared printer connected to a Windows XP machine. It assumes the computers are already networked and that you can access the PC's files. These instructions are relevant for Mac OS X 10.2 upwards. The instructions may work with Vista. I don't have the means to try it.
1. Find the IP address of your PC - go on Start > Run. Type in cmd and click run. Now type in ipconfig /all and hit enter. This should give you the machine's IP address.
2. Share the printer. Open up Printers and find the one you want to share. Right-click and choose Share. Now click the 'Share this printer' radio button. Now choose a sharing name. Keep it simple - e.g. HP, Office, PC etc.
3. Open a web browser on your Mac and type localhost:631 in the address bar
4. You should now have the Common UNIX Printing System web interface up. Click the 'Add Printer' link.
5. Type a name for the printer, making sure you don't include /, # or space characters. Click continue.
6. Select Windows Printer via SAMBA from the Device list and click continue.
7. For the URI, you need to include a username and password for an account on your PC. You then need to enter a URI in the following format: smb://username:password@ipaddress/printer. So for example smb://johndoe:[email protected]/HP
8. Choose your printer's make, or if you have a PPD file for the printer, choose that. Click continue and choose your printer's model. Now click Add Printer.
9. Done! You now have a list of options for changing the various properties of the printer.
You don't need to be on the same workgroup or domain as your PC, just the same subnet. If both your Mac and PC are connected to the same router, either wired or wirelessly, then you should be on the same subnet.
Thanks guys

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

How do I share printing between mac and Vmware Fusion?

I am trying to print from mac and from Windows XP installed in a virtual machine via VMWare fusion on my IMac. If I am able to print from Mac then when I switch over to Fusion and try to print it errors stating the the printer is disconnected. If I disconnect the USB and reconnect then it will print. Same with mac if it is printing okay on Fusion and I try to print from mac it acts like it is printing but it is not sent to the printer, if I disconnect the USB and reconnect then it prints. Printer sharing and window sharing is on. Any suggestions?

I suggest you post your question on the Microsoft Mac Office forums as that's where the Office gurus hang out...
http://answers.microsoft.com/en-us/mac

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

HT1452 I want to reset the permissions on a western digital external hard drive to work between mac and windows... How can I do this easily?

I have a MacBook Pro and have recently bought a Western Digital external hard drive. I used it on my windows laptop first and unfortunately now on the Mac it is read only. How can I set it so that I can use it successfully between the both the Mac and windows laptop?
Thanks

MacQuack wrote:
You will need to pull all the information off first. The formatting will erase it all.
Use Disk Utility (in Applications >> Utilities or use Spotlight to find it). On the left select your WD drive and then select the Erase tab. Where it says Format, select exFat in the drop-down menu. Next, click Erase and done. It will take approx. 5-15mins to re-format.
Cons: You will be unable to store files 4GB or larger in this format (usually only dmg/iso files or large Outlook files). Also, you will be unable to use Time Machine or other auto-backup programs.
That is not entirely correct, there is no 4G limit using exFat, FAT32 is the one with the limit.

Sharing printer between Mac and Windows

Similar Messages

Maybe you are looking for