Sharing two folders with the same name

Hi all.
I have two folders with the same name and I would like to be able to share these under different share names. Problem is, this doesn't seem to be possible.
For instance, try doing this in File Sharing under Server Preferences:
* Click +, add /Data/Media
* Edit permissions on "Media" to permit guest access
* Click +, add /Volumes/Drobo/Media
* Edit permissions on "Media" (make sure you click the right one!) to permit guess access.
This appears on the surface to work, but what it has actually done is to delete the share for /Data/Media. If you exit the File Sharing pane and go back into it again, it will be gone.
Server Admin has the ability to rename a share's name from AFP,SMB,FTP,etc. but this doesn't appear to help either -- I tried adding the second media first, renaming its shared name to Media2 over in Server Admin, and then adding the first. Server Preferences just deletes the second one.
Such a basic thing as being able to rename the share from Server Preferences would appear to be enough to get around this, but since Apple didn't make it possible, I have no idea how to proceed.
Does anyone else have this working, and how did you do it?

The best way to solve this, would be make sure you use database paraneter GLOBAL_NAME, to change your database from lets say orcl1 to orcl1.mycorpdomain.com, by this you can make sure each database actualy has a different name. Your other database then could be named orcl1.example.com.
When chaning the display name in EM you might face other issues later on when for instance trying to run a restore using EM for one of these databases.
Regards
Rob
http://oemgc.wordpress.com

Similar Messages

I notice that in the new update to Firefox if I have two bookmark folders with the same name Firefox will end up deleting one of them.

Both of these problems with the bookmarks started occurring after I installed the latest update to Firefox.
I frequently have bookmark folders of the same name under the older version of Firefox and it has never been a problem before. It is now, and I notice that after I've created two folders with the same name Firefox will end up deleting one of the folders, almost always the older of the two folders (the one created first, chronologically).
I have also noticed that with the new update Firefox will occasionally fail to open all bookmarks in Tabs if I've asked it to do so. I can simply close Firefox and reopen the program and it will work again, but I don't know why this bug is occuring in the first place.

You are using two IP address ranges.. which results in the printer being cut off from the other network..
Why do you have two networks?? It is always better in home situations to run one network.
If you have work setup with an enterprise level router you can setup routes between the two networks.. this is not possible on domestic level apple routers.

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Unreliable - Deleting multiple files/folders with the same name?

I have recently found when trying to delete folders with the same name it is unreliable, is there a better way, ie termin that would work for the following...
I have 1000's folders with sub-folders to delete...
Please see screenshot each folder is identical apart from 'copy #' at the end of the folder
1. using search in top level folder toobar for "instructions"
2. 647 results are retuned
3. Select all and [cmd] [del]
4. Repeat step 1 but some folders are still are found.
Any ideas ?

Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-api</artifactId>
               <version>${jsf.version}</version>
          </dependency>
          <dependency>
               <groupId>javax.faces</groupId>
               <artifactId>jsf-impl</artifactId>
               <version>${jsf.version}</version>
          </dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10

Bridge copy and paste folders with the same name question

I just copied and pasted a folder named, as an example, "concerts" with a bunch of pictures to another drive with a folder with the same name.
I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. They are completely lost!

I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
Are you on Windows? don't know the options you tell, I have three options (Mac) called: 'cancel', 'replace' and 'auto resolve' when dealing with one file and for multiple files it adds 'skip' to the list and has the option for 'apply all'
Replace does what it says, it replaces files and folders with the same name, auto resolve adds a (1) to the files or other number if more with same name are added.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
This is normal and wished behavior, you get a warning if names are the same and a choice to either overwrite them or add them with a new (different) filename.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. Completely lost!
Heard that before but can't replicate this, they always appear in the trash on my Mac.

How to put two files with the same name into the same folder?

How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.

Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.)

Apperture allows you to import two photos with the same name

I have two different Sony Cameras and Apperture has allowed me to import photos from both without a problem however after changing to 1.5 it will not allow me to back them up to an external drive because the drive thinks that the other one is open and that it is duplicated. For example the file name DSC2134 has been saved at different times with different cameras but if I try to back up to my exyternal drive it just hangs up my entire computer. I thought the backup was slow but after 24 hours it still had not moved and would not even allow me to force quit. I had to turn my mac off. If I move each photo one by one it will say that my second photo is a duplicate - even if I have renamed the second version. How do I batch rename? How do I rebuild my library?
I moved to Apperture to get out of all the problems with iphoto now I seem to be back at the begining.
G5 Mac OS X (10.4.4) Tiger

Rhian,
Aperture stores everything in its index table with a master filename as a key. This key may be the incoming filename or a user designated name.
Images are imported into a Project, and OSX naming conventions demand that within a folder, names are unique. However, OS X allows multiple occurences of the same name in different folders. And so does Aperture.
When you exported, it sounds like you exported the dups to the same folder? It sounds like Aperture should have identified this error condition and presented a dialog box to ignore/replace .... obviously it didn't and I suggest that is a program defect.
To remove dups., sort on filename or date/time stamp and delete the offending image.
BTW, with multiple cameras available to us, it is quite reasonable to expect two distinctly unique images with the same name. Duplicating the name is not necessarily duplicating the image. So I am for Aperture allowing dups. - providing it also allows me to rename, which it does. At the image level, true dups. should show up at the date/time stamp level. That's why sorting on date/time is a useful tool.
G.

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

Two groups with the same name in File and LDAP realms

Hi,
I configured WLS 6.0 SP1 to use an LDAP caching realm
as default one. In the LDAP server (Netscape Directory)
I have a group called Administrators. There is a group
with the same name in WLS own File Realm. When I click
on the Groups menu item in the administration console
I only get the Administrators group from the File Realm
listed. Is that expected? What will happen if I protect
a resource ti the Administrators group? Which one will
prevail - the one from the LDAP or the one from File
Realm? Or maybe the two will be merged?
Regards,
Plamen Petrov
AstraZeneca
Sweden

Hi
First of all I want to know that where you created your class, In SE24 or in any programm.
if in SE24, then go to se24 open that class go to methods tab and check if that method name accurs at two places, if not, then
click on that method and check the code.
or if in a program.
then you must have defined like
class <class name> definition.
public section
method <method name>
endclass.
class <class name> implementation.
method <method name>
code for that method.
endclass.
It might be possible you have set the implementation part twice for that particular method, So please check and delete one implementation for that method.
Thanks
Lalit Gupta

Lightroom Faces: Two People with the Same Name

I downloaded Lightroom CC last night and came up with the following question:
I have an uncle and a cousin with the same name...can Lightroom create two different "people" or will I need to name them each differently? I'm guessing it's the latter but figured I'd pose the question in case there is an alternate solution.

johnrellis schreef:
You might have a keyword for each family grouping, e.g. "John Ellis Family" and "Steve Ellis Family", and then place the keywords for the members of each under those parents. E.g. under "John Ellis Family" you'd have "John Ellis", "Mary Ellis", "Jane Ellis", etc. And under "Steve Ellis Family", you might have "Steve Ellis", "Kathryn Ellis", and "John Ellis" (a different John Ellis).
It's a good idea to work with hierarchies. But for the face option to work, you will have to have two unique names.
I just did a quick test.
I have some images of twins in my catalogue, Tom and Boris.
Under them, I created a "name" Twin. Because of the hierarchy, I can apply Boris>Twin to one image, Tom>Twin to another and both of them to a third photo.
So I drag a name box around them and type "Twin". The drop down (auto fill) lets me choose between two identical looking entries called "twin". No way of knowing which one to pick. And maybe you've noticed that the auto fill drop down list starts with entries you used recently. So no good remembering that the top "Twin" will always be "Boris" for example.
The count of used keywords only goes up for one of them if I happen to use the same entry twice.
The only way for this to work (as far as I can tell now) is to drag the appropriate "Twin" from the keywordlist onto the right face in the People view (O).
I work with hierarchies, but I make sure I have unique names.
Also, I don't use spaces in the names, but rather JohnEllis, SteveEllis, etc. That way, if I have a very long list with Ellis members and also a lot of people called John or Steve, it's much easier to narrow the search for a particular person (like in smart collections).
Opening the properties for the keyword, I make sure that "include on export" is NOT on, so you won't see that strange looking name Number123JohnEllis in your exported image.
I have "export containing keywords" and "export synonyms" (and now with LR CC of course "Person") checked. As a synonym, you can put "John, Ellis, John Ellis, Steve Ellis family" and all of these will export.
Hope this makes sense.
Like John suggests, if you already create the Ellis Family>Steve Ellis Family>John Ellis>John>Numer123JohnEllis then you don't have to enter the synonyms, as long as you have "export containing keywords" on all of them checked, as well as "include on export" (except for the Number123JohnEllis keyword which shouldn't have "include on export" checked).
Working with hierarchies can really help you in your keywording. But it will take some time to set it up.

Is it possible to have two files with the same name on my Zen To

Hia,
Is it possible to have two mp3 files with the same name?; I.e if I'm ripping a Bach CD, there are several tracks that have the name preludium, and I hate to do the rename.
Also, will I be able to sync my Zen so that It will only recieve new files that have been added since I last connected my Zen to my computer?
regards,
Fredrik

I believe same filename is OK because the Zen Player does not really care about filename. As far as I know, the Zen database of the tracks in the player is based on the track information such as Title, Artist, Album and Genre. This means you cannot have two tracks of the same Title, Artist, Album and Genre in the Zen Player.

Copy folders with the same name deletes contents of original folder

When backing up some iTunes songs manually I selected the folders I wanted to copy and copied them, then I pasted them into my backup folder.
I got the warning windows about folders having the same name, I could only cancel or replace. So I clicked replace. Then when I checked inside one of the destination folders the original contents of the folder has been erased and only the new files are left.
Has the way Snow Leopard deals with copying folders changed? As I am sure this did not happen before I upgraded.
I tried it on the command line with 'cp -aR' and everything worked as expected, but it does not warn that the folder already exists.
How do I get 'cp -aR' functionality out of finder?

After alot more searching it seems mac OS X has always done this, but I never noticed it before.
I can copy my backups over the network with:
cp -aR Music/source_folder /Volumes/server_name/Music/
ditto can be used as well.

Use two VIs with the same name, different functionality on a single Project

Hi, I'm working with vision builder al labview, I need to integrate the vision builder migration Vis into my main program, (Is not an option), but I have multiple Vis autogenerated with the same name, how can i integrate them in the same project without dependency problems
Thanks in advance

Hi,
Unless you really need tight integration between the Vision code and the rest of your LabVIEW application, or would rather not have to pay for a Vision Builder AI runtime license on the targets on which you want to deploy your final application, I would recommend you look into using the Vision Builder AI LabVIEW API instead of migrating the inspection to LabVIEW.
The API allows to control Vision Builder AI by launching a Vision Builder AI engine, running the inspection and retrieving resulting images and results.
The advantage of the API is that it allows for easier modification and debugging of the Vision Inspection that you designed in Vision Builder, if you need to make changes later. (i.e. all you need to do is open the inspection in Vision Builder AI, modify parameters, add steps etc).
You won't have to change your LabVIEW application, unless you want to output additional results.
When you build and deploy your application, you will need to install Vision Builder AI on the target machine and get a runtime license for it.
Migrating the inspection to LabVIEW is a one way deal. If you need to make changes to the inspection, you will have to migrate the inspection again, or modify the code outside of the Vision Builder AI environment.
As you might have noticed, the code generated is quite complex, and it is recommended to go this route only if you need really tight integration/synchronization between the vision code and the rest or your LabVIEW code, or if you would rather pay for a cheaper Vision runtime license rather than a VBAI runtime license for the deployment machine (in case of deploying multiple systems where cost is a big consideration).
Vision Builder AI API examples are located in this folder:
C:\Program Files (x86)\National Instruments\Vision Builder AI\API Examples\LabVIEW Examples
Hope this helps clarify the use cases and help you make the right decision for your design.
Best regards,
Christophe

I have two accounts with the same name. One no longer works. Can I delete it without deleting the folders it shares with the other account? How?

Each account has the same name (e.g. both are called [email protected]). The newer one was set up by accident during a conversion from Outlook. Both access the same inbox and sent mail. The two accounts show up as separate in Thunderbird and both have their own inboxes and sent mail boxes. The older one has not updated since the newer one was created, and the older one can no longer reach the server. I want to delete the old one, but am worried that it may delete the folders for the new one in the process. All of the relevant messages are still hosted on the ISP's server. Please advise whether I can do a simple "delete account" on the old account and not wipe out the new one at the same time.

Actually, doing a "delete account" does not delete the folders associated with it. They are still there, but unused. There should not be a problem with doing the "delete account".

Sharing two folders with the same name

Similar Messages

Maybe you are looking for