Shift+scroll no longer scrolls left and right!!

I have a logitech mouse w/ a scroll wheel
I have always been able to hold down shift to get the scroll wheel to scroll left and right instead of up and down
and it's suddenly stopped working and I have no idea why
can anyone help?

I THINK this is related to installation of a new logitech bluetooth mouse driver
that stinks. a logitech driver should only control the logitech mouse. it shouldn't affect how other mice work with the OS

Similar Messages

  • HT1338 My new magic mouse will not one finger scroll left and right

    I am up to date with software but after connecting my new magic mouse it will not one finger scroll left and right. It does scroll up and down. Any ideas on what may be wrong??

    I don't have a Magic Mouse, but there is probably a setting that enables and disables horizontal scrolling.  Look on System Preferences Mouse pane.

  • How do i get to see websites on full screen so i dont need to keep scrolling left and right?

    before i could see the whole width of a webpage without scrolling left and right but now everything is bigger and i cant see the whole page without scrolling.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • How do i do the 3 finger scroll left and right to go back or forward on web browsers or anything else?

    topic says it all. cant do that anymore since i got lion

    >>System Preference>Trackpad>>More gestures
    Make changes here:

  • Why is my banner shifting by 1px to the left and right

    Hi there,
    I put up a banner that will be the main graphic with menu for
    my website at www.happysexyyou.com.
    The image was made in illustrator, sliced and saved as html
    and then put into the dreamweaver template. I like the way it looks
    but I notice that the image does a 1 pixel shift to the left, then
    to the right, then back to the left whenever I reload it.
    I can't figure out why this is, and it's the first time I've
    seen this problem. Can anyone see why and help me remove the
    shifting?
    Thanks.
    Ron

    Mozilla based browsers have a problem with odd widths like
    that. I'm
    betting that if you change the widths to 802 px (still too
    wide in my
    opinion) you'll see it stop.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Nick Barling" <[email protected]> wrote in
    message
    news:fdq4b2$h72$[email protected]..
    >I had a quick look and your table based images are sliced
    in 14 sections to
    > make up the banner. The top three images have a combined
    width of 803
    > pixels
    > but you table has a width of 800px, so there is a
    discrepancy there of 3
    > pixels. This could be part/all of the problem?
    Illustrator does not do a
    > great
    > job of automating this type of slicing and manual
    slicing requires care to
    > reduce the amount of slices and 1 px fills that you can
    get.
    >
    > You could make the whole banner more semantic and
    developer friendly with
    > a
    > little CSS and selective slicing rather than the
    antiquated job that
    > Illustrator does. The same could be said for the
    navigation menu too. Not
    > that
    > it would not work as it should but there are better ways
    of getting these
    > thing
    > done.
    >
    > Incidentally, I did not see a pixel shift onload or
    reload when I viewed
    > the
    > page in Firefox v2.
    >

  • I 'm using ipad 2 and am using iwork pages.  how can i set up iwork pages so that a page scroll left to right or right to left instead of just scrolling up?

    I am using ipad 2 and am using iwork paged.  how can i set up iwork pages so that a page will scroll left to right or right to left instead of just up?

    Here you are in a forum dedicated to Pages for OSX.
    Most of us don't use Pages for iOS.
    Better ask in the iWork for iOS forum :
    https://discussions.apple.com/community/app_store/iwork_for_ios
    Yvan KOENIG (VALLAURIS, France) lundi 18 juillet 2011 22:38:20
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Flash cs3: how to make moving/scrolling photo menu left and right?

    http://media.moma.org/subsites/2008/miro/flashsite/index.html
    - click continue, then relative size link
    How can I do this with lash cs3: how to make moving/scrolling
    photo menu left and right?
    When you move left and right and paintings move. and when you
    click on a painting, you see the the title and it links to another
    page on the site.

    scene_mc start at x = -550... x wide is 2164 px
    now I have this and its working...
    navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
    navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
    function navL_Over(e:MouseEvent){
              if(scena_mc.x == 0){
                                  scena_mc.x == 0;
              else if(scena_mc.x <= -10){
                                  scena_mc.x += 10;
                                  navL_mc.addEventListener(Event.ENTER_FRAME, runL);
    function runL(e:Event):void{
              if(scena_mc.x == 0){
                                  scena_mc.x == 0;
              else if(scena_mc.x <= -10){
                                  scena_mc.x += 10;
    function navL_Out(e:MouseEvent){
              navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
    navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
    navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
    function navR_Over(e:MouseEvent){
              if(scena_mc.x == -1164){
                                  scena_mc.x == -1164;
              else if(scena_mc.x >= -1154){
                                  scena_mc.x -= 10;
                                  navR_mc.addEventListener(Event.ENTER_FRAME, runR);
    function runR(e:Event):void{
              if(scena_mc.x == -1164){
                                  scena_mc.x == -1164;
              else if(scena_mc.x >= -1154){
                                  scena_mc.x -= 10;
    function navR_Out(e:MouseEvent){
              navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

  • How to create buttons that control left and right scroll?

    I would like to know if there is a way to create two buttons, each on the left and right hand sides of the screen, that would control the horizontal (x-axis) scroll of my website.  I've built two image buttons that link to anchors located on the left and righthand edges of the page, but this does not achieve the funtionality I'm looking for.  I would like each button to scroll incrementally every time it is pressed. 
    Is this possible in Muse?

    There are no facing pages in Pages 5.
    Peter

  • Scroll front panel left and right using control

    I am taking an input from a chair rotation sensor (that just returns a voltage). I want to use this value to operate a control that scrolls the front panel left and right. Effectivively, the user would be able to navigate a wide control panel just using his chair.
    So to summarise:
    Does anyone know of a way to control the left and right scrolling motion of the front panel using a control?

    Use the VI property "FP.Origin" to set the position of the panel in the window. To move the window position, use "FP.Winbounds".
    LabVIEW, C'est LabVIEW

  • Breadboard will not scroll left or right.

    When I create a breadboard layout of a simple circuit and I'm trying to zoom in to the area of interest the left and right scroll buttons don't do anything.
    Any suggestions or tests would be appreciated!
    Thanks
    Solved!
    Go to Solution.

    Hi pkbsr.,
    I'm using Windows 7 on my computer, and that is definitely not what I'm seeing. However, if clicking the scroll wheel is showing the Alt-Tab flip, then Multisim will not be able to scroll. (It is a quite complicated, but if you are seeing the Alt-Tab flip, Multisim will never know that the scroll wheel was clicked.)
    I did  a quick search online to try to come up with why Windows might be intercepting the click. Do you have any Windows customization software installed, for example AutoHotKey? If not, are you able to scroll using the scroll wheel in other applications? For example, in Internet Explorer
    Browse to ni.com
    Resize the window so you see scroll bars
    Click the scroll wheel and you should see the icon highlighted by the red box in the image below. If you move your mouse around, the page should scroll.
    Garret
    Senior Software Developer
    National Instruments
    Circuit Design Community and Blog
    If someone helped you, let them know. Mark as solved or give a kudo.

  • Unstable screen distortion after startup - scrolls left to right rapidly

    My Mac Mini (2.0/2GB/GMA 950) will not provide a stable screen after startup process completes - the screen rapidly scrolls left to right (possibly right to left, cant be sure) and the mouse pointer appears broken up until I move the mouse to the lower right corner of the display.
    I can get a menu bar menu to drop down, then move the mouse to the corner to stabalize, then use the keyboard to active available commands - but any movement of the mouse cause the screen to resume the instability.
    this only occurs after the initial staup process completes - the startup icons display normal until the loging window or desktop is displayed - then the display goes unstable, scrolling horizontially rapidly.
    This occures in any display resolution I can access, with alternate mouse & keyboards, and even without mouse or keyboard. Also occurs after changing back to original 2x512 memory modules.
    This also occurs with a clean statup from the original installation DVD as well as a 10.5 & 10.6 installation DVDs which suggests a Hardware failure.
    However when I boot into Windows XP using the BootCamp partition the system behaves completely normal - no display problems what so ever.
    Any suggestions on how to narrow this down to a software driver or hardware? Any notices from Aplle that relates to this to a hardware problem?

    Hi. After a 'hard shutdown' - such as pulling the plug - the boot directory may be damaged. It may help to boot from the most recent system disc DVD that you have - could be the 10.4 retail disc - and use Disk Utility to Repair Disc
    http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html
    If Disk Utility finds errors it cannot repair, you could try DiskWarrior
    http://www.alsoft.com/
    You can boot from the DiskWarrior CD and run it - or download it to the laptop and run it, from the laptop, on the G5 internal boot drive, via firewire TDM
    http://docs.info.apple.com/article.html?artnum=58583
    If none of this helps, please post again. Good Luck.
    PS Have assumed you are on 10.4 - for 10.3 boot drive repair see
    http://docs.info.apple.com/article.html?artnum=162662
    Oh - and if you are on 10.4.3 or higher - if Disk Utility on the system DVD repairs the boot drive ok, you may then wish to run the Disk Utility > Disk Verify (the one on the 10.4.3+ boot drive) - just to check. More Good Luck.

  • I can't scroll left to right using my mouse wheel.  any suggestions?

    I can't scroll left to right using my mouse wheel.  any suggestions?

    It is possible in InDesign CS6, and frankly I would prefer it to the panning which I have used and is just not quite as convenient for what i am doing.  I am scrolling through multiple pages not within a single page. it would just be nice to have the same functions in an "upgraded" version.

  • New LG Monitor Screen Image Keeps Shifting a few pixels left and right / goes into power save mode

    I just purchased a new LG Computer Monitor from Best Buy today and hooked it up to my PowerMac computer. Shortly after setting it up, the entire screen image started sporadically shifting left and right a few pixels. And then, at seemingly random times, it'll shut itself down, going into power save mode. I checked the cables to make sure they were secure and they seem to be. Could there be some sort of interference that's causing it? Or would it be the graphics card? My computer is only a couple years old. Please help!

    Do you have another computer you can plug the monitor into to test?
    Adam
    Best Buy Community - Retail, Americas
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • Wireless Keyboard's left and right shift keys don't like some keys...

    Hello everyone!
    I recently bought a second hand 2009 Apple Wireless Keyboard to use with my iPad 32GB Wi-Fi.
    When pressed by themselves, the keys all individually work - I've tested them all using my MacBook's Keyboard and Character Viewer. The problem is when I use either shift keys with the following keys:
    123456789
    qwertyuio
    Now, the odd thing is, the left shift key won't wok with either of those lines but the right shift key will work with the letters but not the numbers.
    Using sticky keys on my MacBook, I can get every single one of the numbers to give out their character (!@£ etc.) with the left and right shift keys. I've not got Mouse Keys turned on either (and I don't think there's an option to enable it on the iPad)
    Also, the Shift keys work perfectly fine with all of the other keys on the keyboard so they aren't worn out.
    Any ideas what could be making my keyboard this way..? Or should I send it back (if I can...)?
    Thank you for your time!

    ok so i've made a bit of progress on my own...
    i've found the on-screen keyboard viewer (silly me, i was looking under "keyboard" in system preferences...) and this flashes with each key i press except the problematic left and right cursor keys.
    moreover, if i click the left and right cursor keys on the on-screen keyboard, they behave as they should, moving my cursor left and right.
    this is starting to look like a hardware fault but i'd love to be able to test outside of the OSX GUI to be really sure. is there any way i can do that. not sure i want to get the screwdriver out just yet...

  • Touchpad left and right clicks don't work on Yoga 2 pro

    Hi,
    I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
    I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

    Hello,
    I've had a Yoga2 Pro now for six months or so.  Just recently the left click stopped working correctly.  What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click.  Sometimes it works, sometimes it keeps stopping.  
    Now, the right click is malfunctioning as well.  I press right click on something like an image, and nothing happens.  I have to right click on something 2-10 times now for it to register that I'm right clicking.
    Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which  can)?
    I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix.  I'm hoping its not a hardware malfunction.  I am running Win 8.1.
    Thank you.

Maybe you are looking for

  • What connection-cable should I use to watch films from my iPod on my TV

    What connection should I use to see films from my ipod on my tV?

  • How do I restore the star bookmark in the toolbar

    I did something and now I cannot see the star for my bookmarks on the right side. Please tell me how to restore that. Thanks!

  • Eclipse download

    I keep downloading eclipse ide for java developers and the folder has no exe. file. Is it the wrong download or I have I done something wrong?

  • PR on work order

    Hi gurus, Currently the i have set my work order as Collective PR. The problem is there are time that the PR was already converted into PO and i input a new non stock item to the work order the system includes it in the old PR number. What the busine

  • How can I play the films in a DVD without pauses?

    Hello, I am trying to make a DVD about a concert of my music band that I recorded and then I prepared with iMovie. My idea is to make different chapters for each song, but when I play the DVD, if I select one song, after finishing it the DVD comes ba