Shop Floor Statuses - Assign Shop Floor Statuses - Component Pick Release

Hi,
is there someone who knows the use of the following forms in WIP module:
- Shop Floor Statuses
- Assign Shop Floor Statuses
- Component Pick Release
We are in 11.5.10
Please provide also an example of a business scenario where this functionality could be used.
Thanks in advance
Regards
Riccardo

hi,
shop floor statuses are created which will allow/disallow moves and assigned to particular operations in the job.
they are normally used in OSP operations to control the movement of material thru intraoperation by the users when the material is gone for OSP.
and they can also be used to hold the job when its moving in operations (may be due to quality problems etc..)
Component pick release is used to issue the required components to a particular job based on pick slip report.
its another way of issueing material to wip apart from backflushing thru wip material transaction form.
hope that u can hav idea abt these.
if u need any clarifications, ols reply

Similar Messages

  • How to generate single move order for same components amongs different job using component pick release

    Hi all,
           I am new in manufacturing and we want to implement functionality of generating single move order for same component among different job using component pick release. Can any one help in this.
    we are using oracle R 12.1.3 version.
          For example. We create finish good XYZ which is build in WIP item. We create discrete jobs for XYZ suppose JOB1,JOB2,JOB3 multiple job we can create for XYZ item. in these JOB suppose component abc is similar with 5 quantity. so our goal is to generate 1 move order for all three JOBS with 15 quantity of abc component.
    please help me to achieve this goal. Immediate  Reply will be appreciated.
    Thanks & Regards
    user11152750

    PranitSaha
            Thanks For your reply. Can you please tell me in detail how can I group as I am new. How using MRP we can group same component from different job in single move order for delivering that component to shop floor.
    Thank you..

  • Urgent: Component Pick releases - Shortages

    Hi Gurus,
    I need help.
    I am planning to implement work order process in our site. I think I finished all required setups like items, BoMs (say 100 lines of BoM components). All components on BoM are operation pull.
    Now I created a job and went into component pick release form. The move order is generated for 60 components, and no on hand is available for other 40 components.
    But what I want to see is if on hand is not available for one of the component, I should not be able to create move order. Because I am not sure when I get delivery for other 40 components in above example, until that my move order will be picked and staged.
    Please help me how can I avoid releasiong the move order for a work order that has shortages?
    Thanks
    Veerakumar
    Edited by: Veerakumar Tikka on Jun 13, 2012 5:42 PM

    Hi PS,
    In genergal, if I have shortage, component pick release is not creating the move order.
    I want to control few items to not to release, I changed the item's supply type as push and tried to release the move order for all lines on the BoM, but as expected for push type componet's transaction type is wip component issue and pull type are backflush transfer on move order. Assuming all material available
    Then I went into BoM setup, unchecked the "auto request material", then tried the component pick release. Now also it created the move order for all lines on the BoM.
    I did not understand what is the significance of "auto request material", or any other setting causing this attribute does not work?
    Just let you know, inventory org setup, I checked "release backflush components".
    Thanks in advance.
    Best regards,
    Veerakumar

  • Usage of Component Pick Release

    Hi,
    I want to know the usage of Component Pick Release.
    Regards,
    Arun

    To add to Karthik's response:
    CPR also lets you create allocations on the material needed for a job.
    This way, even if you have a job that starts in a couple of days, you can be sure that in the meantime some other transaction didn't steal the material that was scheduled to be used on your job.

  • Component Pick Release - Source Subinventory, Move Order

    I am using component pick release screen for push components.. Is there any possible way to select source subinventory prior to creation of move order ?

    Hi,
    Yes, please enter the Sub inventory & locator at BOM level.
    So it will be available in WIP Job & Job mover order.
    Thanks
    ND

  • Component pick release for partial quantity

    Hi All,
    For R12 environment , customer needs move order to be created for partial quantity using component pick release.
    As far as I know component pick release cannot be done for partial pick release and only possible when onhand qty is not available.
    Can any one pleas elet us know if we can have any alternate solution or easy customization so that client can edit the quantities before going to move order creation?
    Thanks
    Vasudha

    when the move order is created..update the allocation and then perform transact move order
    ex if for 10 qty move order is created..but if u wish to issue 5 qty to the job..then update the allocation..for the remaining u can just backorder the move order
    HTH
    Mahendra

  • Discrete Job Component Pick Release (SRS)

    Hi All ,
    For Push - Supply type , we can issue items to the job manually . Could any one brief purpose of Discrete Job Component Pick Release (SRS) in WIP
    Thanks
    Kiran

    Hi,
    Pls check if below MOS(metalink) note helps you:-
    Move Order FAQ #2: Quantity Delivered vs Detailed in Move Order Lines (MTL_TXN_REQUEST_LINES) [ID 431479.1]
    11i Move Order Transaction - FAQ [ID 114156.1]
    Oracle Work in Process Product Documentation [ID 67009.1]
    Also below discussion:-
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=951381&tstart=0
    http://www.oracleug.com/user-guide/work-process/component-pick-release
    Thanks,
    JD

  • Q: Component Pick Release

    Hi all,
    quick question regarding component pick release. I have a WIP job that needs 5 components. 3 are available and 2 are not. I release the available components to the warehouse. Now the warehouse is not supplying them all together. They are supplying one each day. I don't want to use Pick Set functionality because this will only create the move order if all components are available.
    What I need is to receive all the available components together (in my example the 3). Can this be achieved by the Pick Slip Grouping rules?

    Hi,
    Yes, please enter the Sub inventory & locator at BOM level.
    So it will be available in WIP Job & Job mover order.
    Thanks
    ND

  • WIP MFG Component pick release

    Unable to do component pick release for all discrete jobs. It was creating as backordered by default and immediately gets closed.
    Note: sufficient stock is available, supply subinventory defined as non reservable. This problem is occuring only for last two days.
    regards
    Ravi

    Hi, Ravi, are you using Move Order for components? Any messages?
    Regards,
    Ricardo Cabral

  • Component Pick Release - Personalization

    Hi,
    I have a scenario that, I want to run request for custom document from Component Pick Release Form in Work in Process Responsibility after click on "*RELEASE*" button.
    Please guide me how could I do this?
    Regards
    waqas hassan

    Hi,
    Yes, please enter the Sub inventory & locator at BOM level.
    So it will be available in WIP Job & Job mover order.
    Thanks
    ND

  • Component Pick Release for Partial Discrete Job Quantity

    I'm on 12.0.6 and we currently do not use component pick release, but we are considering doing so.
    My employer currently creates a single discrete job (say 120 items) and then completes that discrete job over several days.  Say they plan to produce 30 a day over 4 days.  Is there a way to use component pick release to release that partial quantity?
    So if we have three shifts running and we want to produce 30 a day, 10 each shift.  We want to run component pick release 3 times a day for four days, only releasing the components needed for 10 assemblies each time? Possible?
    Is the only alternative to create 12 different Work Orders?

    when the move order is created..update the allocation and then perform transact move order
    ex if for 10 qty move order is created..but if u wish to issue 5 qty to the job..then update the allocation..for the remaining u can just backorder the move order
    HTH
    Mahendra

  • Component Pick Release

    Hello,
    Is ther a API available to perform a WIP Component Pick release. I know there is a FORM and SRS available thru the application, but is there a public API available?
    TIA
    Amit

    Pl refer the MFG guide . I guess wip_picking_pub package should provide some details .

  • Component Pick Release - Lot, Serial and 'Lot & Serial' Controlled Items

    Hi All,
    Please help understand how Component Pick Release handles Lot, Serial and 'Lot and Serial' Controlled component items.
    Regards,
    Abhishek

    This message pops up, if the supply subinventory has "Allow Reservation" checked. But since you have mentioned that you have checked that. Unable to think of anything else.
    Since the pickset option is turned on, move orders will be generated only if stock is avl for all the components. So, mention as you have already, ensure if avl mtl has been reserved already.

  • Shopping Cart needs to be Held Status when created from Upload Program

    Hi All,
    Shopping Cart is created from Custom Upload Program. In Upload Program, we used BBP_PD_SC_CREATE, BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and BBP_PD_SC_COMMIT.
    Once the Shopping Cart is created from this upload program, I want ot put Shopping Cart as Helad Status.
    I exported the parameter I_PARK as 'X' in BBP_PD_SC_CREATE and BBP_PD_SC_UPDATE. But it is not working i.e., the SRM system is not keeping the Shopping Cart as Held Status.
    Scenario:
    I am uploading the Shopping Cart Items (Shopping Cart creation) on behalf of my manager. My manager has to approve Shopping Cart.
    If shopping cart is created maually and Shopping cart value is within the spending limit, work flow is not triggered approval proceess. If I am creating shopping cart behalf of some one, I am adding the approver manually while creating.
    When ever we create shopping cart through custom upload program, the shopping cart needs to be approved by the Requestor (my manager, to cross check shopping cart items). So I want to park the Shopping Cart and I want to add Approver as my manager.
    Please suggest me or guide me to get the solution for my issue.
    Thanks,
    Sudarsan
    Edited by: KOYYA SUDARSANA NAIDU on Nov 14, 2008 9:12 PM

    Completed

  • Check status for Shopping Cart to include F-53 postings

    Dear SRM GURUS
    we are following a classic scenarios and SRM version 4.0 where in we create a shopping cart in SRM and a  purchase Req is created in backend and based on that we create a Purchase Order and do a Goods receipts and Invoice Booking in MIRO in R3.
    When we check the status of shopping cart we are able to view all in SRM check status for shopping cart.
    Now my requiremnt is that when after MIRO in R/3 we run F-53  for payement to vendor.
    Whether this can be displayed in the shopping cart check status that as to when actual payement was made to the vendor through F-53.
    regards,
    Nimish Sheth

    F-53  transaction(R/3) status in SRM

Maybe you are looking for

  • Modelling the fields in the cube from different source system.......

    Hi, I need to create one query on the cube. User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube. These are master data fields ( 7 fields in total) from other source system

  • Azure Backup performance is very slow.

    I am trying to replace an vendor solution with Azure Backup but the performance is so slow, I cant get back to complete. I believe we have plenty of bandwidth to do the backup and we are not going thru a proxy.  For example, I had a backup run for 24

  • I can't find where to go to login to hide my purchases? HELP!

    I am trying to hide purchases (books, etc) from my account. I can't find where to do this at. Please help! Thanks!!

  • US Cleanse "Address Thrashing" for University Dormitory-ish Addresses

    In DS4.1, in the examples below (A & B are University/College Dormitory addresses), the US Address cleanser seems to consistently switch/thrash the output. For example, the first time through the cleanse if A1 is the input, the process essentially ou

  • XCode 3.2 crashes on startup

    When I start XCode 3.2 in my non-admin account, XCode crashes. BUt XCode does start on the admin account. I tried cleaning the cache using Onyx. Still the issue persists. Process: Xcode [62132] Path: /Developer/Applications/Xcode.app/Contents/MacOS/X