Short dump in alv too many parameters in perform)

I M GETTING PROBLEM IN THIS PROGRAM AGAIN.
Getting short dump too many paramamerets in perform
<CODE>Report Z_50840_ALV
Line-size 80
Line-count 64
Message-id ZZ
No Standard Page Heading.
Copyright statement *
@ copyright 2007 by Intelligroup Inc. *
Program Details *
Program Name: Z_50840_ALV
Date : 19.07.2007
Author : Vasudevaraman V
Description : Test Program
Transport No:
Change Log *
Date :
Author :
Description :
Transport No:
Tables *
Tables: vbrk.
Type Pools *
Type-Pools: SLIS.
Variables *
Data: GV_REPID TYPE SY-REPID.
Structures *
Data: BEGIN OF GIT_VBRK OCCURS 0,
VBELN LIKE VBRK-VBELN, "Billing Document
FKART LIKE VBRK-FKART, "Billing Type
KNUMV LIKE VBRK-KNUMV, "Number of the document condition
BUKRS LIKE VBRK-BUKRS, "Company code
NETWR LIKE VBRK-NETWR, "Net value in document currency
WAERK LIKE VBRK-WAERK, "SD document currency in basic list
END OF GIT_VBRK,
GIT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FCAT TYPE slis_fieldcat_alv,
GIT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT.
Field Symbols *
Field-symbols: <fs_xxxx>.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
PARAMETERS: LISTDISP RADIOBUTTON GROUP G1,
GRIDDISP RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B1.
Initialization *
Initialization.
GV_REPID = SY-REPID.
At Selection Screen *
At selection-screen.
Start Of Selection *
Start-of-selection.
SET PF-STATUS 'ABC'(001).
PERFORM GET_BILLING_DETAILS.
PERFORM FIELD_CATALOGUE.
PERFORM GET_EVENTS.
End Of Selection *
End-of-selection.
PERFORM DISPLAY_BILLING_DETAILS.
Top Of Page *
Top-of-page.
End Of Page *
End-of-page.
*& Form GET_BILLING_DETAILS
text
--> p1 text
<-- p2 text
FORM GET_BILLING_DETAILS .
SELECT VBELN
FKART
KNUMV
BUKRS
NETWR
WAERK
FROM VBRK
INTO TABLE GIT_VBRK
WHERE VBELN IN S_VBELN.
IF SY-SUBRC = 0.
SORT GIT_VBRK BY VBELN.
ENDIF.
ENDFORM. " GET_BILLING_DETAILS
*& Form FIELD_CATALOGUE
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOGUE .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = GV_REPID
I_INTERNAL_TABNAME = 'GIT_VBRK'
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = GV_REPID
I_BYPASSING_BUFFER = 'X'
I_BUFFER_ACTIVE = ' '
CHANGING
CT_FIELDCAT = GIT_FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FIELD_CATALOGUE
*& Form DISPLAY_BILLING_DETAILS
text
--> p1 text
<-- p2 text
FORM DISPLAY_BILLING_DETAILS .
IF LISTDISP = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = 'X'
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
IS_LAYOUT = IS_LAYOUT
IT_FIELDCAT = GIT_FCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = GIT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER = IR_SALV_LIST_ADAPTER
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB = GIT_VBRK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = 'X'
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_GRID_TITLE
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
IT_FIELDCAT = GIT_FCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = GIT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB = GIT_VBRK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " DISPLAY_BILLING_DETAILS
*& Form GET_EVENTS
text
--> p1 text
<-- p2 text
FORM GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = GIT_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT GIT_EVENTS INTO WA_EVENTS.
CASE WA_EVENTS-NAME.
WHEN 'USER_COMMAND'.
WA_EVENTS-FORM = 'USER_COMMAND'.
ENDCASE.
MODIFY GIT_EVENTS FROM WA_EVENTS INDEX SY-TABIX.
ENDLOOP.
ENDFORM. " GET_EVENTS
FORM USER_COMMAND.
WRITE :/ 'USER_COMMAND'.
ENDFORM.</CODE>.
REGARDS,
SURAJ

I have run the program in my system and getting the following display instead of dump.
Bill.Doc.  BillT Doc.cond.  CoCd             Net value Curr.
90000763   B2    0000002800 1000                 0.00  DEM
90005177   F2    0000012141 1000             5,500.00  DEM
90005178   F2    0000012144 1000            32,838.00  DEM
90005179   F2    0000012146 1000             6,100.00  DEM
90005180   F2    0000012147 1000             6,100.00  DEM
90005182   S1    0000012226 1000             5,500.00  DEM
90005183   S1    0000012227 1000            32,838.00  DEM
90005184   S1    0000012228 1000             6,100.00  DEM
90005185   S1    0000012229 1000             6,100.00  DEM
90005186   F2    0000012230 1000             6,100.00  DEM
90005187   F2    0000012231 1000             6,100.00  DEM
90005188   F2    0000012232 1000            32,778.00  DEM
90005189   F2    0000012233 1000            34,354.00  DEM
90005190   F2    0000012234 1000            19,991.00  DEM
90005191   F2    0000012235 1000            19,719.00  DEM
90005192   F2    0000012236 1000            43,004.00  DEM
90005193   F2    0000012237 1000             9,242.00  DEM
90005194   F2    0000012238 1000            12,156.00  DEM
90005195   F2    0000012239 1000             7,294.00  DEM
90005196   F2    0000012240 1000             9,694.00  DEM
90005197   F2    0000012241 1000            32,838.00  DEM
90005198   F2    0000012242 1000             9,352.00  DEM
90005199   F2    0000012243 1000            13,013.00  DEM

Similar Messages

  • Too many Parameters in the Selection Screen

    Hi all,
          I have a requirement to include too many parameters in the selection screen. Let me explain the scenario.
      1.  There is an option for Output File name previously. But now i need to provide fields for 5 to 8 file names in the same  Selection Screen.
      2.  There will be 8 more check boxes coming to the selection screen. Could you please provide me the best & Optimal way to incorporate them in the same selection screen.
    Already the screen is overcrowded with many fields & What need is that 'Is there any option to utilise the Screen at most without using Tab Strip?'
    Pleas Help me in this crucial regard.
    Thanks & Best Regards,
    Vishnu

    Hi,
    Use the below logic.
    selection-screen: begin of block blk1 with frame.
    selection-screen: begin of line.
    parameters: p_chk1 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm1.
    selection-screen position 10.
    parameters: p_file1 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk2 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm2.
    selection-screen position 10.
    parameters: p_file2 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk3 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm3.
    selection-screen position 10.
    parameters: p_file3 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk4 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm4.
    selection-screen position 10.
    parameters: p_file4 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk5 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm5.
    selection-screen position 10.
    parameters: p_file5 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk6 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm6.
    selection-screen position 10.
    parameters: p_file6 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk7 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm7.
    selection-screen position 10.
    parameters: p_file7 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: begin of line.
    parameters: p_chk8 as checkbox.
    SELECTION-SCREEN COMMENT 4(5) comm8.
    selection-screen position 10.
    parameters: p_file8 like rlgrap-filename.
    selection-screen: end of line.
    selection-screen: end of block blk1.
    initialization.
    comm1 = 'File1'.
    comm2 = 'File2'.
    comm3 = 'File3'.
    comm4 = 'File4'.
    comm5 = 'File5'.
    comm6 = 'File6'.
    comm7 = 'File7'.
    comm8 = 'File8'.

  • Multisim 2001 "too many parameters for subcircuit" error

    When simulating circuits in Multisim 2001 with op amps from User library am getting Netlist Error message "Unable to correctly determine the nodes for the current circuit due to the following reasons:
            Too many parameters for subcircuit type lf156_op_amps_1 (instance: xxu3)"
    or a similar message for whatever op amp am using.  Have tried creating components for several different op amps and always get same error message.  Carefully checked the Pin Mapping Table and the symbol pins are correctly matched with order of pins in model.  The only way have been able to get a simulation to run with op amp components in the User Library is if copy an op amp directly from Multisim library to User library and make no changes whatsoever.  But if do something seemingly minor such as bring up the Symbol editor and add a text note underneath the symbol then get the "too many parameters for subcircuit" error.
    Am also getting a Consistency Self Check error stating "Error: The circuit it empty.  Simulation requires at least one ground."  Do have ground in circuit; presumably this error is related to Netlist error above.
    Operating system is Windows XP Professional.

    Well, this is an interesting situation in Multisim 2001. I tried doing this with another component and had the same results. I just renamed the part with no other changes and re-saved it to my database and sure enough I got this error. I have no idea what is causing this other than just a bug in the software. Us 2001 users will just have to live with this unless someone does happen to find a solution.
    I don't seem to have any problems when creating new components and using or editing existing symbols with new model information. This does suck. What if just wanted to edit one paramenter instead of using a completely different model? I really hope someone can find a workaround or solution to this. I am glad you broughtm this to our attention.
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100

    Hello,
    I am getting a new message this morning creating a view:
    The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100
    Any ideas on this?
    Thanks,
    DOm
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hi,
    Based on my research, this is a limitation of sql server.
    http://msdn.microsoft.com/en-us/library/ms143432.aspx
    And please refer to the below article to find a fix for this issue:
    How to fix SQL error: "Too many parameters were provided in this RPC request"
    http://blogs.msdn.com/b/emeadaxsupport/archive/2009/09/01/how-to-fix-sql-error-too-many-parameters-were-provided-in-this-rpc-request.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • Too Many Parameters Errors. Toplink Generated Class error 300 columns table

    Hi Folks,
    I have a table which has around 300 columns, once I generate JPA entity using Entities from the Table wizard in Jdeveloper, it gives me an errror that too many parameters in the Method, that is actualy in the generated constructor.
    In case I delete half of the arguments in the constructor, it doest gives me error, as it doesnt exceeed the limit, would that be fine ? or Toplink internally need to call that constructor for the instrumenting purposes?
    Other option is to go by a default constructure, that I recommend personallly, but want to make sure it will work.
    Any comments, or anyone came into this problem before
    A.B
    Edited by: AAB on Sep 8, 2009 7:32 AM

    Hello,
    TopLink will only use the no argument constructor when building the object, then populate attributes using either attribute or property access. So the generated constructor taking arguments is not used at all by TopLinkl.
    Best Regards,
    Chris

  • Short Dump with ALV Report

    Hi
    I have one Zreport which gives the result in ALV form.
    After getting the result(1 row with 33 columns) when I tried to export the ALV results to spread sheet using the option : List-> Export-> Spread Sheet OR by click on Excel icon in the display screen,I'm getting the short dump with the description "No more storage space available for extending an internal table" .
    After analysis ,find that dump is raising in the FM : F4_GET_RESULT of Include Program : LSDH3U03.
    Can anyone provide us some clue .
    Thanks & Regards,
    Sreeram

    Hi,
    If the display is in ALV grid format, then you can try another approach to save the data in a spreadsheet.
    - Right-click on any output cell.
    - Select 'Spreadsheet' from the drop down list
    - radio-button 'All available formats'
    - Excel (In existing XXL format)
    Thanks!
    VS.

  • In module pool program dump due to ''too many consecutive nested call scree

    i got a dump i found that this is due too many consecutive nested call screens ,i have used call screen
    statement in program ,in program once the transaction is completed successfully ,on pressing the ok button ,it will go to the first screen , here where the call screen is executed
    so to prevent this dump what shall i do ,plz suggest

    Hi,
    Use LEAVE TO SCREEN 0 statement in OK code
    Try this.

  • Too Many Parameters

    Hi,
    I have a few methods which have quite a few parameters - in some cases about 10 or 11. None of these methods are similar in so much as to warrant a bean object being passed, but is there another alternative?
    Any ideas?

    warrant a bean objectdoesn't warrant a bean object eh? how ya figure that besides apathy? for example:
    someObj.setColor(int, int, int)
    sure that works, but doesn't
    someObj.setColor(Color)
    work much better in showing you what your doing here? you want to set a color, so use a color.
    these many parameters your putting in, don't they represent something? like the others' said, its a bit vague to comment here... maybe you have a case where these many parameters aren't belonging to the same thing, but its hard to imagine.. even if its some flight control system that take variables from many places in wierd ways....why thats an "event" of sorts and so you can pass in an event with all that information. in j2ee httprequests, you can dump all sorts of things into a request or session and then just pass that around and get out what you need.....same thing. map, list, whatever you choose. it represents an event none the less.

  • Viewer unable to display page when too many parameters are selected.

    I have a report that the user can select multiple parameter values. When the user selects too many values and clicks the "Apply Parameters" button, the page will not display. Is there a formatting issue/bug? Is there a way to overcome this?
    It does not appear to be a specific number. Instead, it seems that the page will only display when the number of values selected fit on two lines or less on the web page that displays the report results.
    Thanks,
    -G

    I found this document on SDN for displaying paramater values in Crystal reports. There are some good examples in this report. I hope it helps. It helped me out with a simliar problem.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0e21e07-a075-2b10-24ac-b4b9749ed025
    Good luck,
    Ilan

  • Short dump in alv

    hello gurus,
    while i running sales report in production it foin into short dump and in error message indicates low memory space into internal table while last select quary executes.
    also  i want make u sure in production while am execute for one motnh internal table cotains large amount of data.

    Wrong question....
    Change your solution to use less memory instead. There are several ways this can be achieved.
    Most likely you don't need to process data for the whole month at once, so a simple way of reducing memory use is to select data and process them for one day at a time.

  • Error running PL/SQL with too many parameters

    Developer 10g (9.0.5.1 Build 1605) seems to have a memory limitation when running a PL/SQL procedure. The dialog box that is created to allow running and/or debugging of PL/SQL procedures defaults the parameter sizes to 200 bytes. At a certain point the number of parameters causes an oracle error. When I remove the 20th IN parameter the procedure works.
    Is there a way to do any of the following:
    1) Increase memory used so that more parameters can be used
    2) Change the default of 200 to a smaller value
    3) Bind the size of the IN parameters (in the procedure definition, not each time you run the procedure)
    --Oracle error:
    An error was encountered performing the reequested operation:
    ORA-01001: invalid cursor
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 819
    ORA-06512: at "SYS.DBMS_SQL", line 19
    ORA-06512: at line 10
    ORA-06502: PL/SQL: numeric or value error: character string
    buffer too small
    -- Example PL/SQL code
    CREATE OR REPLACE PACKAGE "PKGTEST" AUTHID
    CURRENT_USER AS
    TYPE GENCURTYPE IS REF CURSOR;
    PROCEDURE EXTRACT (
    REQUEST_P1 IN VARCHAR2,
    REQUEST_P2 IN VARCHAR2,
    REQUEST_P3 IN VARCHAR2,
    REQUEST_P4 IN VARCHAR2,
    REQUEST_P5 IN VARCHAR2,
    REQUEST_P6 IN VARCHAR2,
    REQUEST_P7 IN VARCHAR2,
    REQUEST_P8 IN VARCHAR2,
    REQUEST_P9 IN VARCHAR2,
    REQUEST_P10 IN VARCHAR2,
    REQUEST_P11 IN VARCHAR2,
    REQUEST_P12 IN VARCHAR2,
    REQUEST_P13 IN VARCHAR2,
    REQUEST_P14 IN VARCHAR2,
    REQUEST_P15 IN VARCHAR2,
    REQUEST_P16 IN VARCHAR2,
    REQUEST_P17 IN VARCHAR2,
    REQUEST_P18 IN VARCHAR2,
    REQUEST_P19 IN VARCHAR2,
    REQUEST_P20 IN GENCURTYPE,
    --REQUEST_P21 IN VARCHAR2,
    --REQUEST_P22 IN VARCHAR2,
    --REQUEST_P23 IN VARCHAR2,
    --REQUEST_P24 IN VARCHAR2,
    --REQUEST_P25 IN VARCHAR2,
    --REQUEST_P26 IN VARCHAR2,
    --REQUEST_P27 IN VARCHAR2,
    --REQUEST_P28 IN VARCHAR2,
    --REQUEST_P29 IN VARCHAR2,
    --REQUEST_P30 IN VARCHAR2,
    RESPONSE_RETURN_CODE OUT CHAR,
    RESPONSE_ERROR_MSG OUT VARCHAR2
    END PKGTEST;
    CREATE OR REPLACE PACKAGE BODY "PKGTEST" AS
    PROCEDURE EXTRACT (
    REQUEST_P1 IN VARCHAR2,
    REQUEST_P2 IN VARCHAR2,
    REQUEST_P3 IN VARCHAR2,
    REQUEST_P4 IN VARCHAR2,
    REQUEST_P5 IN VARCHAR2,
    REQUEST_P6 IN VARCHAR2,
    REQUEST_P7 IN VARCHAR2,
    REQUEST_P8 IN VARCHAR2,
    REQUEST_P9 IN VARCHAR2,
    REQUEST_P10 IN VARCHAR2,
    REQUEST_P11 IN VARCHAR2,
    REQUEST_P12 IN VARCHAR2,
    REQUEST_P13 IN VARCHAR2,
    REQUEST_P14 IN VARCHAR2,
    REQUEST_P15 IN VARCHAR2,
    REQUEST_P16 IN VARCHAR2,
    REQUEST_P17 IN VARCHAR2,
    REQUEST_P18 IN VARCHAR2,
    REQUEST_P19 IN VARCHAR2,
    REQUEST_P20 IN GENCURTYPE,
    --REQUEST_P21 IN VARCHAR2,
    --REQUEST_P22 IN VARCHAR2,
    --REQUEST_P23 IN VARCHAR2,
    --REQUEST_P24 IN VARCHAR2,
    --REQUEST_P25 IN VARCHAR2,
    --REQUEST_P26 IN VARCHAR2,
    --REQUEST_P27 IN VARCHAR2,
    --REQUEST_P28 IN VARCHAR2,
    --REQUEST_P29 IN VARCHAR2,
    --REQUEST_P30 IN VARCHAR2,
    RESPONSE_RETURN_CODE OUT CHAR,
    RESPONSE_ERROR_MSG OUT VARCHAR2
    AS
    BEGIN
    -- Initialize return variables
    RESPONSE_RETURN_CODE := 'F';
    RESPONSE_ERROR_MSG := 'Oracle JDeveloper does not work';
    RESPONSE_RETURN_CODE := 'S';
    RESPONSE_ERROR_MSG := 'Oracle JDeveloper works';
    END EXTRACT;
    END PKGTEST;

    Vijay,
    It turns out the problem concerns the size of the text buffer that JDeveloper generates (the code we display in the dialog). We inadvertantly limited the size of the code to 2000 characters. So the limitation isn't on the number of parameters, but the amount of code generated for each parameter.
    We have fixed the problem; however, this fix will be in the next release of JDeveloper (the production release of 10.1.3) due later this year.
    - John McGinnis
    Oracle JDeveloper Team

  • ADF BC Binds too many parameters

    This has to be something simple. There's only one bind parameter (nullable), and one View criteria...but for some reason, ADF BC wants to bind 3 parms and it blows up. Anyone have any insight as to where the 3rd is coming from?
    [665] ViewObjectImpl.closeStatementsResetRowSet(12258) ViewObject: [xxx.pres.fc.model.view.readonly.RequestorAgencyView]FCServiceAM.RequestorAgencyView1 close prepared statements...
    [666] ViewObjectImpl.getPreparedStatement(12035) ViewObject: [xxx.pres.fc.model.view.readonly.RequestorAgencyView]FCServiceAM.RequestorAgencyView1 Created new QUERY statement
    [667] ViewObjectImpl.buildQuery(4014) RequestorAgencyView1>#q computed SQLStmtBufLen: 207, actual=179, storing=209
    [668] ViewObjectImpl.buildQuery(4028) SELECT * FROM (SELECT REQUESTOR_ID
    ,OFFICER_FIRST_NAME
    FROM REQUESTOR_AGENCY) QRSLT WHERE ( ( ( ( UPPER(OFFICER_FIRST_NAME) LIKE UPPER( ? + '%') ) OR ( ? IS NULL ) ) ) )
    [669] ViewObjectImpl.bindParametersForCollection(19278) Bind params for ViewObject: [xxx.pres.fc.model.view.readonly.RequestorAgencyView]FCServiceAM.RequestorAgencyView1
    [670] BaseSQLBuilderImpl.bindParamValue(2185) Binding null of type 12 for 1
    [671] BaseSQLBuilderImpl.bindParamValue(2185) Binding null of type 12 for 2
    [672] BaseSQLBuilderImpl.bindParamValue(2185) Binding null of type 12 for 3
    [673] ViewObjectImpl.freeStatement(12229) ViewObject: [xxx.pres.fc.model.view.readonly.RequestorAgencyView]FCServiceAM.RequestorAgencyView1 close single-use prepared statements
    [674] QueryCollection.buildResultSet(1134) QueryCollection.executeQuery failed...
    [675] Diagnostic.printStackTrace(409) com.microsoft.sqlserver.jdbc.SQLServerException: The index 3 is out of range.
         at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
         at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.setterGetParam(SQLServerPreparedStatement.java:700)
         at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.setNull(SQLServerPreparedStatement.java:888)
         at oracle.jbo.server.BaseSQLBuilderImpl.bindParamValue(BaseSQLBuilderImpl.java:2193)
         at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3645)
         at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:19288)
         at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:1099)
         at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:859)
         at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:6314)
         at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1169)
         at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1028)
         at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2753)
         at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2730)
         at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1559)
         at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3426)
         at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:8993)
         at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:766)
         at oracle.adf.model.binding.DCIteratorBinding.refreshControl(DCIteratorBinding.java:666)
         at oracle.jbo.uicli.binding.JUIteratorBinding.refreshControl(JUIteratorBinding.java:474)
         at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4377)
         at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:347)
         at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1592)
         at oracle.jbo.jbotester.panel.BindingPanel.setBindingContext(BindingPanel.java:116)
         at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:88)
         at oracle.jbo.jbotester.panel.BindingPanel.<init>(BindingPanel.java:71)
         at oracle.jbo.jbotester.form.BindingForm.createMasterPanel(BindingForm.java:63)
         at oracle.jbo.jbotester.form.BindingForm.init(BindingForm.java:98)
         at oracle.jbo.jbotester.form.JTForm.<init>(JTForm.java:72)
         at oracle.jbo.jbotester.form.BindingForm.<init>(BindingForm.java:50)
         at oracle.jbo.jbotester.form.FormType$1.createForm(FormType.java:63)
         at oracle.jbo.jbotester.form.FormType.createForm(FormType.java:199)
         at oracle.jbo.jbotester.form.FormType.createTab(FormType.java:270)
         at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:248)
         at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:207)
         at oracle.jbo.jbotester.form.FormType.showForm(FormType.java:203)
         at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:140)
         at oracle.jbo.jbotester.tree.ObjTreeNode.showForm(ObjTreeNode.java:123)
         at oracle.jbo.jbotester.tree.Tree.processTreeMouseClicked(Tree.java:728)
         at oracle.jbo.jbotester.tree.Tree.access$100(Tree.java:96)
         at oracle.jbo.jbotester.tree.Tree$TreeMouseListener.mouseClicked(Tree.java:141)
         at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
         at java.awt.Component.processMouseEvent(Component.java:6266)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    Nevermind...you work on something for 2 days, then post to the forum, then figure it out immediately afterwards. The problem was that I had been adding a bind variable, then adding the view criteria that referenced it. Apparently, following this sequence adds Kind="where" to the variable in the xml source. Finally I tried deleting the variable, creating the view criteria, and adding the bind variable WITHIN the Edit View Criteria wizard. Afterwards, I noticed that Kind="viewcriteria" and the light bulb finally turned on. Kind="where" should only be used when you're using parameters in the view's query...or both your query and your view criteria. Who knew.

  • SEM-BCS Short Dump while executing Manual Posting Task

    Hi SEM-BCS Colleagues,
    I am having a peculiar problem with relation to the settings for Manual Postings. I have three scenarios for which I have defined manual document types and tasks 1) Standardizing Entry (Data Collection) 2) Manual Document in IU for adjustment 3) COI Group level manual postings. I am just creating and not changing any settings for document field properties also. I have configured monthly consolidation frequency and period category and I am posting document type 1 in Local Currency and 2 and 3 in Group Currency since they are after currency translation.
    Have any of you faced similar problem and help me please?

    Hello,
    I am also getting short dump during data collection in BCS.
    we recently upgraded the system to SP20. Is it anyway related to upgrade.
    I also checked the MYSELF as a source system, but not found one.
    Could you please let me know how you have solved this issue.
    short dump:
    Runtime Errors         PERFORM_TOO_MANY_PARAMETERS
    Exception              CX_SY_DYN_CALL_PARAM_NOT_FOUND
    Date and Time          04.12.2009 05:21:11
    Short text
         Too many parameters specified with PERFORM.
    What happened?
         In a subroutine call, there were more parameters than in the
         routine definition.
         Error in the ABAP Application Program
         The current ABAP program "SAPLRSDRI" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
          not caught in
         procedure "RSDRI_CUBE_WRITE_PACKAGE_RFC" "(FUNCTION)", nor was it propagated by
          a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         A PERFORM was used to call the routine "CUBE_WRITE_PACKAGE" of the program
          "GPD1S8520HM8UV0U2XBDVPADF03".
         This routine contains 7 formal parameters, but the current call
         contains 10 actual parameters.

  • Urgent: Data Loading error(Load failed with Short Dump) caller 70 missing

    Hi please go through the error occured.
    <b>"Request is still running.
    Diagnosis:
    No error could be found. The current process has probably not finished yet.
    System Response:
    The ALE Inbox of the SAP BW is identical to ALE Outbox of the source System and /or the maximum wait time for this request has not yet run out and/or the batch job in the cource system has not ended.
    current status
    in the source sytem."</b>
    Update mode: Full, processing Online.
    I think we processed the infopackage in the online. if we process it in the back ground then we won't face any problem. Singal turns to Red.
    Please guide us. we need to load it immidiately.
    Thanks in advance.
    Regards,
    Nagesh.
    Message was edited by: Nagesh Ganisetti
    Message was edited by: Nagesh Ganisetti

    Hi Friends,
       at last the load has Terminated with Short Dump. Can any one guide me how can i reslove this. we could see the data in PSA.
    i'm sending the part of the short dump.
    Too many parameters specified with PERFORM.                                                                               
    What happened?                                                                               
    In a subroutine call, there were more parameters than in the  routinedefinition.                                                                         
    Error in ABAP application program.                          
    The current ABAP program "GP3KGSUXARXPB2F9YCR4B3MFPT6 " had to be terminated because one of statements could not be executed.                    
    This is probably due to an error in the ABAP program.                       
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                    
    and make a note of the actions and input that caused the                                    
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                              
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                    
    termination messages, especially those beyond their normal deletion                        
    date.                           
    is especially useful if you want to keep a particular message.                              
    Error analysis                                                                               
    A PERFORM was used to call the routine "VALUE_TO_SID_CONVERT_DB" of the program             
    "GP3KGSUXARXPB2F9YCR4B3MFPT6 ".                                                            
    This routine contains exactly 7 formal parameters, but the current                       
    call contains 8 actual parameters.                                                          
    parameters.                                                     
    How to correct the error                                         
    Correct the PERFORM call. You can find out where the call occurs in the section "Active calls / events".
    You may able to find an interim solution to the problem                                     
    in the SAP note system. If you have access to the note system yourself,                     
    use the following search criteria:     
    Please guide me.
    Regards,
    Nagesh.
    Message was edited by: Nagesh Ganisetti

  • How many parameters to WWV_FLOW_ITEM.MD5()?

    Using v2.0.0.00.49
    I have optomistic locking working on a few of my pages, but I have run into the problem where I am sending too many parameters to the function WWV_FLOW_ITEM.MD5(). How many parameters does the function take?
    Thanks!

    SQL> desc WWV_FLOW_ITEM;
    FUNCTION MD5 RETURNS VARCHAR2
    Argument Name                  Type                    In/Out Default?
    P_VALUE01                      VARCHAR2                IN     DEFAULT
    P_VALUE02                      VARCHAR2                IN     DEFAULT
    P_VALUE03                      VARCHAR2                IN     DEFAULT
    P_VALUE04                      VARCHAR2                IN     DEFAULT
    P_VALUE05                      VARCHAR2                IN     DEFAULT
    P_VALUE06                      VARCHAR2                IN     DEFAULT
    P_VALUE07                      VARCHAR2                IN     DEFAULT
    P_VALUE08                      VARCHAR2                IN     DEFAULT
    P_VALUE09                      VARCHAR2                IN     DEFAULT
    P_VALUE10                      VARCHAR2                IN     DEFAULT
    P_VALUE11                      VARCHAR2                IN     DEFAULT
    P_VALUE12                      VARCHAR2                IN     DEFAULT
    P_VALUE13                      VARCHAR2                IN     DEFAULT
    P_VALUE14                      VARCHAR2                IN     DEFAULT
    P_VALUE15                      VARCHAR2                IN     DEFAULT
    P_VALUE16                      VARCHAR2                IN     DEFAULT
    P_VALUE17                      VARCHAR2                IN     DEFAULT
    P_VALUE18                      VARCHAR2                IN     DEFAULT
    P_VALUE19                      VARCHAR2                IN     DEFAULT
    P_VALUE20                      VARCHAR2                IN     DEFAULT
    P_VALUE21                      VARCHAR2                IN     DEFAULT
    P_VALUE22                      VARCHAR2                IN     DEFAULT
    P_VALUE23                      VARCHAR2                IN     DEFAULT
    P_VALUE24                      VARCHAR2                IN     DEFAULT
    P_VALUE25                      VARCHAR2                IN     DEFAULT
    P_VALUE26                      VARCHAR2                IN     DEFAULT
    P_VALUE27                      VARCHAR2                IN     DEFAULT
    P_VALUE28                      VARCHAR2                IN     DEFAULT
    P_VALUE29                      VARCHAR2                IN     DEFAULT
    P_VALUE30                      VARCHAR2                IN     DEFAULT
    P_VALUE31                      VARCHAR2                IN     DEFAULT
    P_VALUE32                      VARCHAR2                IN     DEFAULT
    P_VALUE33                      VARCHAR2                IN     DEFAULT
    P_VALUE34                      VARCHAR2                IN     DEFAULT
    P_VALUE35                      VARCHAR2                IN     DEFAULT
    P_VALUE36                      VARCHAR2                IN     DEFAULT
    P_VALUE37                      VARCHAR2                IN     DEFAULT
    P_VALUE38                      VARCHAR2                IN     DEFAULT
    P_VALUE39                      VARCHAR2                IN     DEFAULT
    P_VALUE40                      VARCHAR2                IN     DEFAULT
    P_VALUE41                      VARCHAR2                IN     DEFAULT
    P_VALUE42                      VARCHAR2                IN     DEFAULT
    P_VALUE43                      VARCHAR2                IN     DEFAULT
    P_VALUE44                      VARCHAR2                IN     DEFAULT
    P_VALUE45                      VARCHAR2                IN     DEFAULT
    P_VALUE46                      VARCHAR2                IN     DEFAULT
    P_VALUE47                      VARCHAR2                IN     DEFAULT
    P_VALUE48                      VARCHAR2                IN     DEFAULT
    P_VALUE49                      VARCHAR2                IN     DEFAULT
    P_VALUE50                      VARCHAR2                IN     DEFAULT
    P_COL_SEP                      VARCHAR2                IN     DEFAULT
    ...

Maybe you are looking for

  • Ipod 5th generation 30gb not recognized by computer , you'll make my dreams come true !

    Hello my name is Anna , 4th year Computer engineering student , from spain. as i said when I connect my ipod it says USB Device Not Recognized , any solutions please ? tried alot nothing worked

  • How to know create or change DEBMAS02 IDOC?

    hi, 1. Can anyone let me know whether DEBMAS02 outbound  idoc is used for create and change of Customer master records or not? 2. How to identify whether it is change or Create in IDOC? which field is referring it? regards, Khaja.

  • How can I downgrade my Java version and Runtime Environment to 6?

    Hi, thanks for reading this in advance: I have a couple problems. Ever since Java Preferences was removed in one of Lion's updates I have been having trouble with java. How do I downgrade my java and runtime environment to java 6? When I go into term

  • App server creation , missing PSORA64 problem

    hi , so i was trying to create the application server following the documentation, i downloaded Oracle 64bit client because i had oracle database 32bit, and added the path to AddToPath ,but when i boot it i still have the error : LoadLibraryA() in ps

  • Parameters to pass in SO_DLI_EXPAND

    Hi all, I would like to know the parameters I have to pass in the FM <b>SO_DLI_EXPAND</b>. The requirement is to send e-mail with an attachment. The mail IDs will be got from the distribution list mentioned on the selection screen. I have prepared th