Short dump in report generation for bex query

Hi,
I have e newly installed SAP NetWeaver 7.3 and I'm not able to run BEx-Queries. When I start transaction RSRT and try to generate the report for the selected bex query, I get the following short dump:
Category               ABAP Programming Error
Runtime Errors         RAISE_EXCEPTION
ABAP Program           SAPLRRSI
Application Component BW-BEX-OT
If I start the test in RSRV for that query I get:
Generation limits for the generated report
Unable to load report GPEM3XZBL2Y9VX9H6SN
Am I missing a profile parameter for that generartion limits or something else?
Thanks in advance!

Hi,
Check whether your SAP GUI is activated and installed correctly.
check following threads
Runtime error RAISE_EXCEPTION has occurred
Dump when activating Business Content 7.35
Thanks and regards
Kiran

Similar Messages

Short Dump While selecting Variant for ABAP query

Hi,
ABAP query is going to short dump (CONNE_IMPORT_WRONG_COMP_LENG) while selecting a Variant. If i create and use variant then i am able to see Output of Variant.But not able to use Earlier created variants .
I think some mismatch between variant values and selection screen fields.Can anyone tell me how to rectify this ?
I am not able to debug the code as dump is coming in a System program(RSDBSPVD).Can anyone tell me which database table i can use to get values of the Variant.
Thanks in Advance.
Nirmala K

Hi nirmala,
chk the links:
http://help.sap.com/saphelp_webas620/helpdata/en/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/c0/9803a7e58611d194cc00a0c94260a5/content.htm
regards,
keerthi.

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down

Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
Krishna

Hi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic

請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2

NI 網站上提供Report Generation for microsoft office 版本為1.1.3
可是我用的Lab View是8.0版，不適用。
找了許久都沒看到有1.1.2。

舊的正版軟體不會放在網站上，請洽業務部

How to bulid a Crystal report based on Bex query as source

Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,

Hi
The Crystal Reports are integrated with BW such that the query built in BW can be used to bulit Crystal Reports on them.
After launching the Crystal Reports, you will have and option : "Open reprt from BW" whcih will help you in opening the BW Queries and create Crystal Reports.
Also in the Menu there is an optin SAP-->Create New Report from a Query
Regards, Hyma
Edited by: Hymavathi Yanamadala on Aug 13, 2009 5:52 AM

Developing Crystal Report from SAP BEx query

Hi,
I am trying to create an crystal report from SAP BEx query( using MDX driver). I can able to connected to BEx query and got key figures and characterstics, but not able to get calculated key figures into crystal reports.
Would likes to know how to use the calculated key figures used at BEx query level in Crystal Reports? and
Creation of complex parametes in Crystal reports on SAP data.
I really appreciate your quick reply.
Thanks in advance.
VR

Hi,
calculated keyfigures are shown like any other keyfigure in Crystal Reports.
ingo

Enabling the Reporting Tools WAD, BEX Query Designer in BI 7.0

Hi friends,
Recently we installed BI 7.0 system with SP 13 and now we want to connect to the reporting tools WAD, BEX Query designer, When I am selecting the BI system and after entering the login details we are encountering a error msg" connection to the gate way is failed".
If any one has a solution please post a reply.
Regards,
shahid

hi,
I am getting the error msg after running the wad application as no BI server is existing.
I hope that the wad and the BI system is not configured properly or connected to each other.
If any documents please forward me.
Regards,
shahid

To create variants for Bex query

Hi Guys,
where and how do we create variants for Bex query.
Thanks,
Your help is appreciated.

Hi Sheo,
There are several threads about this, check here:
/thread/297437 [original link is broken]
Hope this helps...

Two problmes between Crystal Reports 2008 and Bex Query

Hi Gurus.
I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
1)     I have defined some Parameters Fields using the follow options:
Type: String
List of Values: Dynamic
Value Options Level1:
                     Show on (Viewer) Panel :Editable
                      Prompt text: <text>
                      Sort Order: Ascending by value
                      Prompt With description Only : False
                      Optional Prompt: True
                      Allow multiple values: True
                      Allow discrete values: True
                      Allow range values: False
When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
There is any option to ability this option in the infoview.
2)     My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
Thanks.

Hi Abhilash.
Thank you for your information.
1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
Thank you again.

WebI report based on BEx query in Live Office document

Hi
We have a BEx query in BW that has one input ready variable (period). Then we have created a WebI report based on this BEx query (the WebI report itself does not have any prompts). When we run the WebI report we get asked to enter a value in the BEx variable (remember: this is not a WebI prompt). Until this stage everything works fine. Then we have created a Live Office document and added the WebI report. When we refresh the Live Office document, the BEX variable is not shown. The data that is retrieved is from the last time the WebI report run. The refresh option is set to u201COn demand: From the databaseu201D.
Is there a way to get the BEx variables to be shown when refreshing the Live Office document? Remember, we do not use WebI prompts.
We use BW 7.3 and BO BI 4.0.
Kind regards
Erik

Hi,
Unfortunately, this feature has not been developped the BICS connectiviy. It is only available for manda
tory prompts based on universe. Others have noted the same problem, so there is an enhancement request for the feature to be available using BICS connection in the "Ideas Place".
Use the link to vote for the idea, more votes gives a better chance that this will be picked up for development.
[LifeOffice idea|https://cw.sdn.sap.com/cw/ideas/4094]
Thanks,
Marianne

How to refresh report data from bex query (BW) with parameters

Hello,
i hope someone can help me with my problem. I developed an desktop application, which loads (actual state) a report from the local file system. After setting the parameters, the report should be saved as a pdf file. Loading the report into the ReportDocument object and exporting the report to a pdf works fine. Setting parameters (without) a data source too. But now i can't refresh the data in the reports given by a parameter (e.g. time).
I know there are two methods to do this. Push and pull. I want to use the pull method, cause my program should exports different reports and i think it should be easier to handle this with this method.
On my development environment is installed:
Crystal Reports SP 4
MS Visual Studio 2010 (coding with C# .NET)
.NET Framework 4
SAP Integration Kit
Crystal Reports for Visual Studio 2010 SP1 - SDK libraries
Crystal Reports for Visual Studio 2010 SP1 - Runtime 32 bit
SAP GUI 7.20 (Compilation 3)
The bex query is enabled for external use from ole db for olap. Do i have forget something else?
Here is a part of my code:
        public ReportDocument doPullMethod(ReportDocument crReportDocument)
            TableLogOnInfo crTableLogOnInfo = crReportDocument.Database.Tables[0].LogOnInfo;
            ConnectionInfo crConnectionInfo = crTableLogOnInfo.ConnectionInfo;
            crConnectionInfo.Password = "*******";
            crReportDocument.SetDatabaseLogon(crConnectionInfo.UserID, crConnectionInfo.Password, crConnectionInfo.ServerName, crConnectionInfo.DatabaseName);
            MessageBox.Show(crConnectionInfo.UserID + " _ " + crConnectionInfo.Password + " _ " + crConnectionInfo.ServerName + " _ " + crConnectionInfo.DatabaseName);
            for (int i = 0; i < crReportDocument.Database.Tables.Count; i++)
            //    crReportDocument.Database.Tables<i>.ApplyLogOnInfo(crTableLogOnInfo);
                MessageBox.Show("TestConnectivity: " + crReportDocument.Database.Tables<i>.TestConnectivity());
            return crReportDocument;
Cause i'm using only one bex query, i know that the SetDatabaseLogon()-method should bring me the same result as the ApplyLogOnInfo()-method SAP Crystal Reports .NET API Guide
Exists an order which i have to follow? First setting parameter and then set the login informations or backwards? Cause i also get the "Failed to load database information" exception, when i set a parameter and TestConnectivity() returns false.
Do i have to activate the data refresh manually or will be the data refreshed automatically on export?
I searched in this forum (.NET - SAP Crystal Reports) and found only this thread which according to my problem:
[Re: Crystal report connects to BW RFC by .NET;
The question is assumed answered.

Hi Robin,
There is a SAP Integration Kit you need to allow CR to connect to SAP data sources. There isn't one for CR for VS 2010 and I don't believe there are the various extra options available in the SDK, no SDK access to the DB driver.
Possibly, Check the other post, download and run the app Ludek suggested, it will get the connection info for your report using RAS and then plug the output code into your code and see if that works. It should show the crdb_olap dll is the database driver, assuming that is the connection method you used when designing the report.
Pay attention to the database dll in the output from that app and verify it is on your PC in: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
If that doesn't work then.....
The problem is, CR for VS 2010 ( version 13 ) is the runtime for BOE 4.0 ( version 14 ) which includes the Integration kit drivers on install. There is no standalone install of the database drivers. They are installed with CR 2011, which doesn't have a SDK included, CR for VS 2010 is also the Developer version for CR 2011.
Because of the "custom" connection requirements there is no SDK or access to the BW datasource extra options....
Also note that CR 2008 is not supported in VS 2010, it should work though as long as you stick to 2.0 -> 3.5 framework, no 4.0 Framework support in CR 2008 or BOE 4.0
You may want to try the SAP Integration Kit forum to see if anyone has been able to make this work or contact your account manager to verify if there are any plans to do what you are doing....
Don

Crystal reports - Create Report from SAP Bex Query

I have installed the Crystal reports 2008 for a trial period and the sap integration kit. I have created a new report from a sap query and I am trying to format the report. I would like the columns headings be similar to Bex query - Current Month Jan 2009 which includes the selection parameter of month. I have tried with no sucess. Any help will be appreciated

Ingo
in crystal reports the variables are available in the field explorer. However when I drag the date selection to the report (in design mode) i get the foloowing ?[0I_CALMO], but when I execute the report I don't get any values. I also tried to create a formula but could not access the parameter for month year. Is there documentation on how to do this?
Thanks for your help.

Crystal Report on BW BEx Query via MDX in SAP Portal

Hi!
We need to display a CR in the Portal. The CR is based on a MDx BW Query. To create and display the report is no problem. Even saving back to BW is working fine.
But how do we get this CR displayed in the EP?
Thanks in advance
Jörn

Hi,
Should only the BO SAP Integration Kit iViews / URL iViews be used and are the Crystal Report iViews (http://help.sap.com/saphelp_nw04/helpdata/en/36/d4a94076b63713e10000000a155106/frameset.htm) obsolete?
Yes as the Crystal Report iView are based on an older version
If we export the Crystal reports to SAP BW, is it possible to call them with BEx iViews like the xCelsius reports? (Like with DASHBOARD=<report name> for xCelsius)
From where can we get the Crystal Report ID, if we export them to SAP BW?
You should use the BusinessObjects Integration Kit iView template for Crystal REports and the ID can be retrieved from the CMC
Ingo

BW Accelerator for BEx query to be used in polestar

I'm using a Bex query in polestar after creating BWA Index.
The BEX query is suitable for Business Objects after checking it in the program RSR_QPROV_CHECK(which beomes infocube)
But the F-Table of the query is not Indexed and it ends dump after longtime, when activated in t-code RSDDTPS.
The BWA index is not created for the F-table of the query (which will be created as a Flat Table)
The error message i get in Business Objects is "2007:Error creating physical plan: Index does not exist;index=Query name in cube: query name_ps,scripted search: function 'ps_gnav_highlight.searchGN_v2' "
How to create BWA Index for the query (which is infocube of polestar).

Hi Tansu,
Thanks for your response but I am looking at Query indexing and not indexing the Cube.
Still the data is huge and I get errors hence need to know if Delta indexing is possible in case of Query (snapshot) indexing. you may look at transaction RSDDV -> Explorer (button on top along with BIA).
Thanks,
Ameet

Short dump in report generation for bex query

Similar Messages

Maybe you are looking for