Short Dump while loading Delta from ODS to ODS
Hi Experts,
I have run into a short dump error while loading delta from one ODS to another via a process chain.
Following is the error message:
Error analysis
Short text of error message:
Request 0000259294 is not completely activated. Please activate it again
Technical information about the message:
Diagnosis
Activation of request 0000259294 has terminated, or is not yet
complete.
System response
Procedure
If the process has terminated, all of the requests that the system
was unabe to activate in the most recent activation process have to
be reactivated before the new requests can be activated.
If you are not able to carry out this activation step, delete the
relevant requests from the administration of the ODS object (on the
Requests tabstrip).
Procedure for System Administration
Message classe...... "RSM1"
Number.............. 180
Variable 1.......... 0000259294
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
Can someone help me resolve this?
Thank you
Check the status of request SID 259294 in ODS, whether the Activation got completed or not. If not wait till the activation completes.
If there is any problem in the activation process, correct that complete the activation process and load the ne request that you want to load..
Regards
VJ
Similar Messages
-
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
Short Dump while loading data into the GL ODS
Hello Guyz
I am getting a database error while loading the GL ODS in BW. I am performing an INIT load, and the error occurs during the activation stage:
Database ErrorHello Atul,
PSAPTEMP has nothing to do with PSA. It is a temporary storage space and is present in all systems.
You can check this in transaction DB02 if you are using Bw 3.x and DB02OLD if you are using BI 7.0. Once in DB02/DB02OLD, you will see a block which says tablespaces. In this block, there is a push button for freespace statistics, click on it and it will take you to a screen which shows the free space for all tablespaces.
Hope this helps,
Regards. -
Short dump while loading master data (0material_attr).
Hi,
I am experiencing a short dump while loading 0matrial_attr from R/3.
Name of the runtime error :
DBIF_RSQL_SQL_ERROR
program is generating exception at this point.
***Try to insert the records into the ODS table
INSERT /BIC/B0002905000 FROM TABLE L_T_DATA.
pls help me.Hi,
I am sure I am looking at the proper dump.
the code I have pasted is the standard code.. which I get to see in the dump analysis.
******************************dump analysis*********************************
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0002905000 ]"
Please check the entries in the system log (Transaction SM21).
system log in SM 21 is below**************
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully. -
Error while loading data from 0FI_TX_4 to ODS
Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
TonyHow are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks -
Short dump while loading data in ODS
Hi,
When i scheduled data load for ODS, a short dump was generated with following error:
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RULE_BASED_MODIFY_RSMONMESS" "(FORM)"
How to correct the error
The exception must either be prevented, caught within the procedure
"RULE_BASED_MODIFY_RSMONMESS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01654: unable to extend index
SAPBD2.RSMONMESS~AXY by 128 in tablespace PSAPBD2"
Internal call code.........: "[RSQL/INSR/RSMONMESS ]"
Please check the entries in the system log (Transaction SM21).
Please suggest what needs to be done.Hi Sneh,
This is table space issue.
You need to contact basis guys to get it resolved.
Take a screen shot of this error and send the information to basis guys.
Once they clear the problem. repeat the step.
Hope this helps,
Sri..... -
Short dump while loading data in to Bw using Process Chain.
got the problem in the Production System.......... I won't get any confirmation from my customer to debug the program in the Poduction.
In BW I have to load the data every day using the process chain. in the monitor I can't find any problem every thing is working fine. status is green.. and loads the data into ODS successfully. But the job runs more than 6 Hrs and automatically an E-mail is sent to us that the processing takes long time.But it loads the data successfully into ODS.
Since 10 days everyday we got a mail with the same problem. My customer asked me tTo analyse the problem.
I check the short dump there I found that due to some problem the program get intrupted.
<b>the short dump</b>
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_INFOCUBE) TYPE RSINFOCUBE
*" EXCEPTIONS
*" ILLEGAL_INPUT
*" REQUEST_NOT_CLOSED
*" INHERITED_ERROR
DATA: l_s_cube TYPE rsd_s_cube,
l_t_dummy TYPE rsdri_t_rfcdata,
l_s_rsapoadm TYPE rsapoadm,
l_nothing_found TYPE rs_bool.
get type of cube
CALL FUNCTION 'RSD_CUBE_GET_ONLY_DB'
EXPORTING
i_infocube = i_infocube
i_objvers = rs_c_objvers-active
i_with_atr_nav = rs_c_false
i_with_message = rs_c_false
IMPORTING
e_s_cube = l_s_cube
EXCEPTIONS
infocube_not_found = 1
illegal_input = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 0.
WHEN 1.
RAISE illegal_input
WHEN OTHERS.
RAISE inherited_error.
ENDCASE.
In the short dump I observed that the porgram get intrupted at RAISE illegal_input when sy-subrc = 1.
I have to analyse this. problem........ whay is so happened...............
Any one of you face the same problem............... if so please let me give your valuble suggestions regarding this.
Cheers
sailekhaLooks like it reaches the water mark level thats why you are getting message.
-
Short dump while loading Hierarchy flat file
Hi gurus,
i am trying to load data from flat file to hierarchy, when i am trying to schedule the InfoPackage its giving message a dump :-
"ASSIGN_LENGTH_0" C
"SAPLRRSV" or "LRRSVU10"
"RRSV_INT_CHA_VAL_SPLIT"
These are the steps i followed.
1 created a ZINREGION
2. enabled hierarchy of ZINREGION and included ZINCOUNTRY as external characteristics.
3.and then created infosource and assigned DataSource and created hierarchy and created InfoPackage.
4. selected the hierarchy in InfoPackage, which was created by clicking the hierarchy structure in DataSource and transfer structure.
5.when i scheduled the load in InfoPackage i got above short dump message.
I FOLLOWED THIS BLOG
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
thanks
Sathya PathapatiHi Philippe,
The processing step, as I could see in the status tab of the monitor, is ".Service API" I am not sure if this is what you are asking for. If not, please let me know what you want me to check for. Below is the description I have in the Status Tab.
InfoIdocs missing; file system
Diagnosis
InfoIDocs are missing. With the file system as source system, the IDocs are created in BW. As this did not happen there was probably a short dump in BW.
System response
No end-confirmation arrived in the Warehouse from
Procedure
Check the short dumps in BW.
Check the data in the InfoCube.
Error Correction:
If the data was correctly updated in the InfoCube, then it is possible that no InfoIDocs were generated.
Set the data request status manually to "OK" (green traffic light).
This error has occured in a standard SAP Program.
Hi Ravi,
I am not loading the data to the cube but only to the ODS. I have plans to load the data later from ODS to Cube.
I am not using the process chains to load the data and anyway, as I am not loading to the cube, I auume the index will not come into picture. Please correct me if I am wrong.
And, what do you mean by "Split the file". Can you please elaborate?
Thanks,
RPK. -
Hi All,
I am getting this error message while loading data in BW. The eeror message is below:
Data not received in PSA Table.
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
When I checked the short dump it is as below.
ShrtText
An SQL error occurred when accessing a table.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP12DW003276UZE34XM7O2QXLER" or "GP12DW003276UZE34XM7O2QXLER"
"INSERT_ODS"
Can someone suggest me what should I check?
Thanks in advance.Thanks a lot Manga. I did what you told and it gave me this error message.
Inconsistency: High value for table /BIC/B0000541000: 0002 ; PARTNO value in RSTSODS: 0022
So you mean to say once I click on correct error button, it should be good. So after that if do the loading, it should not give me this problem if I am right.
But can you tell me what exactly does that error message mean? Also is this not an table space issue. I have to wait to correct that error as DBA is currently looking into it.
Assigned points. Will assign more points if the issue resolves. -
Message_type_x short dump while deleting request from infocube
Hi,
While deleting one of the erroneous requests from some infocubes,
system is resulting in short dump "MESSAGE_TYPE_X".
This is happening only with respect to some infocubes.
Description of short dump:
Short text of error message:
System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-5- (see long text)
Can any one of you please help with this?
Regards,
Nilima RodriguesHi NILIMA,
I got same problem with my InfoPackage last month with same error msg.
that error come due to data inconstancy in data base table.
in my case i am unable to open my InfoPackage and after double clicking it was giving dump with same error.
If u know abap then just change the sy-subrc value from 4 to 0 before dump line code it will resolve your problem.
for this on dump screen click on debugger button then it opens your code and shows line on which u getting dump with table name check your entry in table ok
if u unable u find table then do one thing just put break point before dump line and open fresh rsa1 and go to same cube and double click it will stop on your debugger point just press f5 button it shos sy-subrc 4 convert it to 0 and press edit button and press f8 .
Regards
Ankit -
Short dump while loading demo cubes
HI
When I am trying to load data from flat file (using standard datasource, and the file being present in the application server) to SAP DEMO Content cubes, I am getting the following short dump. I could see the data in PSA.The request remains yellow in the monitor.
I have searched the sdn and could not find the exact match to my issue.
Find below the short dump content.
Short text
An exception occurred that was not caught.Error
Short text
An exception occurred that was not caught.
What happened?
The exception CX_RSR_X_MESSAGE was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program SAPLRRMS has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time. -
Short dump while loading statistics data - 'CX_RSR_X_MESSAGE'
Hi all,
When I am loading statistics data with Init selection, system gives short dump error. Below is the message-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
If anyone know the answer please share with me.
Regards,Hi Preet,
Please find the details of short dump from ST22-
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
Regards, -
Dump while loading data from POS DM to data source
Hello experts
I'm loading data from POS DM to data source 0RT_PA_TRAN_CONTROL, when amount of data is more then 1800000 records i get dump with the message "Unable to fulfil request for 8004 bytes of memory space."
How can i divide data on small packets? or can you suggest other solution?
I already check ztta/max_memreq_MB parameter and it's set to maximum.Check the parameter ztta/roll_area in RZ11 , changes to this parameter would affect all the datasources.
The Maximum recommended size of a datapackage is 100.000 records and If a delta load is big, then divide the package into smaller using the parameter MAXDPAKS.
check this note for more info 1292059.
Also check below notes
1102641 Consult: Dump during insert in PSA table due to incorrect values
1163359 Load methods using SMQS or SAPI-controlled to transfer to BW
1160555 Determination of maximum data packages in a delta request
Points are appreciated. -
Dump while loading data from 1 cube to other cube
Hi,
We created a direct mapping between 2 cubes ( no start/end routines, formula exist in the mapping). Strange part is while I am loading data from one cube to other cube all data packages executing successfully only last data package giving dump with ITAB_DUPLICATE_KEY. This is in our QA system. But it is working/loading correctly in DEV.
Please help. Thanks in advance for your support.
Regards,
SaiHi Sai,
Please refer to below blog for ITAB Duplicate Key error.
ITAB_DUPLICATE_KEY Dump error during Master Data loading
This can occur when a BW client has many different source systems, unused objects still remains, creating a duplicate entry in RSISOSMAP table.
Regards
Shabnam -
Regarding short dump while loading data
Hi All,
I am loading data using 0FI_GL_4. This is a periodic load which was working fine till March. There are lot of postings that happened in April and period was open till 20th. Now when I am trying to load that for 12th period April. I am getting the following error "ABAP/4 processor: DBIF_RSQL_SQL_ERROR" in short dump.
This is the error analysis:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSEG_CPUDT_DATA" "(FUNCTION)"
I am tried to load data 5 times till now and every time I am getting the same error. I checked with Basis people for the DB space and it is fine.
Why I am suddenly getting this error???Hi,
it looks like an internal table overflow in your source system.
Try reducing the data_package size of your load or ask your basis guys to have a look on short dump and perhaps increase this memory.
Try RSA3 in the source system and see if it works with your data_package size values from BW and see if it works. If not reduce the number of records...
On which plugin release is your system running?
hope this helps,
Oliviier.
Maybe you are looking for
-
Batch internl number assignment
Hello SAP gurus, Lets suppose i have finished product, semifinished product and raw material with me.I am managing all of them in batches.I want to use automatic creation of batch (internal number assignment) for them.Now my question is i want to
-
Oracle 9.2.0.6 , JDK 5 and JDBC driver
Hi Friends, At my work place they have Oracle 9.2.0.6 and now they want to user JDK 5. I find that JDBC driver only supports JDK 1.4. Can some one suggest what I need to do so that later I should not face unknown issues Thx V
-
How to ran a java application with out console?
Hi I have developed several applications using java. I'm trying to run them on windows platform. The way I run them now is by openning a CMD window and by typing java -jar myjarfilename.jar This way cmd window remains on windows taskbar/desktop until
-
That's what I want to do. Here are the criteria: 1. A page of thumbnails 2. Click on any one and it goes full size 3. At the bottom of the fullsized picture, a mouse over gives left and right arrows to go to previous or next picture 4. Some way to re
-
How do I convert an email or word document to send as PDF?
How do I convert an email or word document to send as PDF?