Short dump while loading master data (0material_attr).

Hi,
I am experiencing a short dump while loading 0matrial_attr from R/3.
Name of the runtime error :
DBIF_RSQL_SQL_ERROR
program is generating exception at this point.
***Try to insert the records into the ODS table
INSERT /BIC/B0002905000 FROM TABLE L_T_DATA.
pls help me.

Hi,
I am sure I am looking at the proper dump.
the code I have pasted is the standard code.. which I get to see in the dump analysis.
******************************dump analysis*********************************
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0002905000 ]"
Please check the entries in the system log (Transaction SM21).
system log in SM 21 is below**************
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.

Similar Messages

Getting dump while loading master data

Hi,
i am gettin dump while loading master data genrated by copa,
that gtwa_not_assigned.
Best regards,
dushyant.

hi,
see weather that master data contain attribute or not,
if not than un check master data field from the master data attribute tab,
and than try to load it again.
Dushyant.

ABAP DUMP while loading master data

hi Gurus,
              I am trying to load master data but I am getting the following dump , I cannot infer anything from the Dump message, I would be grateful if anyone could throw some light on it..
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     11/13/2006 at 13:17:57
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "CL_RSDMD_UPDATE_MASTER_DATA===CP " had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
rror analysis
n exception occurred. This exception is dealt with in more detail below
The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
aught nor passed along using a RAISING clause, in the procedure "_DB_FIRE"
"(METHOD)"
ince the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
he reason for the exception is:
f you use an ABAP/4 Open SQL array insert to insert a record in
he database and that record already exists with the same key,
his results in a termination.
With an ABAP/4 Open SQL single record insert in the same error
ituation, processing does not terminate, but SY-SUBRC is set to 4.)
ow to correct the error
he exception must either be prevented, caught within the procedure "_DB_FIR
(METHOD)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
se an ABAP/4 Open SQL array insert only if you are sure that none of
he records passed already exists in the database.
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
APSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
L_RSDMD_UPDATE_MASTER_DATA===CP " or "CL_RSDMD_UPDATE_MASTER_DATA===CM00Y "
DB_FIRE"

one of the response says " In the infopackage set processing as 'Only PSA' and tick the checkboxes for 'Update subsequently in data targets' and 'delete duplicate records'.then try to reload."
I do not find the Delete duplicate records check box in the IP...cananyonepls tell me where to find thid check box?
thanks

Short dump while loading statistics data - 'CX_RSR_X_MESSAGE'

Hi all,
When I am loading statistics data with Init selection, system gives short dump error. Below is the message-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
If anyone know the answer please share with me.
Regards,

Hi Preet,
Please find the details of short dump from ST22-
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
Regards,

Regarding Short Dump While loading data from DB Connect

Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am getting

hi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..)

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Error 0 update while loading master data

Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.

I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Short dump while displaying cube data in production

Hi Folks,
I'm getting a short dump while displaying cube data in production, please suggest
Thanks and Regards
Santhosh

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Strange error while loading master data

Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.

Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps...

Error Caller 70" is missing while loading master data

Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
Sandhya

Hi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps

Short dump while loading master data (0material_attr).

Similar Messages

Maybe you are looking for