Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"

Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0  "                                                                           
line 1072:                                                                     
"FORM "CLEAR_SPECIAL_TABLES" does not exist"                                   
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist"  .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PM

Hi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey

Similar Messages

  • View Paycheck Stub Error: (Form xyz does not exist)

    Hi Portal Knowledgeable ones,
    I am running EP 6.0 SP 13.  My SAP target is ECC 5.0.
    I have a problem in the ESS application.  When I attempt to view the paycheck stub for any employee, the portal returns the error:
    <b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZCHK does not exist</b>
    Form ZCHK is our custom paystub form.
    Thanks,
    Kevin
    <i></i>

    Had to include form via IMG.

  • ESS Payslip error : Form ZF01 does not exist

    Hi,
    We have created a form in PE51 that is ZF01 and include IMG.
    But we r getting the following error message:
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZF01 does not exist
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
         at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
         at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
         at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
    Regards
    Anumit

    Did you have to configure anything else in the img like the badi:define settings or the provide salary statement as pdf.   We are past the form doe'n't exist, but we are getting  a similiar message.
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when calling method INIT of class CL_HRXSS_REM
    Can you help.

  • Portal Application - Form  [Error: Path ID does not exist. (WWC-50001) ]

    Hi,
    I have created a table as like below to hold pictures on the
    database.
    SQL> create table img_store
    (iname varchar2(20), picture BLOB);
    Using Oracle Portal-> Application-> create new 'FORM' based on
    table, an "Upload Image Form" was created as a portlet.
    The form allow to browse images which you want to upload into
    database, but when i click on 'Insert' button after browsed the
    image to store the image path to the column, an error message
    displayed:
    Error: Path ID does not exist. (WWC-50001)
    Anyone can advice to me on this? Thanks.
    Regards,
    Sherlyn

    hi chrigel,
    i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
    thanks,
    christian

  • Every time I launch Firefox it pops up an error stating "Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem."

    Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
    The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

  • Error: Requested resource does not exist with SAP WebAS..deployed an ear

    hi,
    i deployed an application using SDM gui deployement manger.   the application is built using struts,spring etc. I have also created a datasource with Oracel 9i succesfully and hav associated it with the application.
    When i try to access the application using the struts based path i get an "<b>ERROR 404:- Error: Requested resource does not exist</b>". I also tried accessing the index.jsp page directly without struts paths but dont know why i get an error "<b>File [appContext/admin/index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].</b>"
    The same ear is working perfectly fine with IBM WSAD but not in SAP Web AS ?? is there any configuration issues that i need to address ?? Kindly help me ASAP !!
    Regards,
    Vaibhav

    Hi,
    The Required server log contents are as follows:-
    #1.5#000CF1AFC124017A000000020000067000041B1D550F525C#1155712701853#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Plain###Runtime error in compiling of the JSP file <C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp> !
    The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
         com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
    Exception id: [000CF1AFC124017A000000000000067000041B1D550F4D94]#
    #1.5#000CF1AFC124017A000000030000067000041B1D550F5C88#1155712701868#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/doculine#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Plain###Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
         at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:117)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.getClassName(JSPServlet.java:238)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.compileAndGetClassName(JSPServlet.java:429)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:169)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
         at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1001)
         at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:560)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:209)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
         com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
         at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.validate(JSPParser.java:243)
         at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.initParser(JSPParser.java:348)
         at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:105)
         ... 37 more
    #1.5#000CF1AFC124017A000000050000067000041B1D550F5F94#1155712701868#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [action] finished with error.
    The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
    Exception id: [000CF1AFC124017A000000030000067000041B1D550F5C88]#

  • Sales Order Error Message 'Product does not exist in system'

    Hi Gurus,
    we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
    Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
    Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
    We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
    We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
    Please help me with that issue. Your help will be highly appreciated!!!
    Kind regards
    Hannes

    Solved with the help of SAP.
    Keywords: COM_PRODUCT
    COM_PRODUCT_GUID_GET_INTERNAL
    CONVERSION_EXIT_PRID1_INPUT
    CRM_ORDERADM_I 501
    Relevant notes:
    Note 1449146 - Dump While Creation IP via WebUI
    Note 1445079 - Unable to add products to contract
    The notes do not exactly described our issue but the code corrections were still relevent for us.

  • ESS Error - User id does not exist

    Hi All,
    When the user click on personal information - Emergency address link on the portal, user gets error "user XX does not exist in this period".
    This proble is only for this particular user.
    on the back end an abap dump with following error message is encountered.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO 
    Exception              CX_SY_REF_IS_INITIAL           
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it    
    has                                                                            
    come across a statement that unfortunately cannot be executed.                  
    I checked the data is maintained in IT0105 an IT0002 correctly. Even the table V_T7XSSPERSUBTYP has value for IT0006 with correct usecase.
    The user has a hiring date of 13.07.2009 and IT0105 also has the start date as 13.07.2009 can this be  the reason? Since the validity is not for complete month?
    Please advise what could be the possible reason for the above error. How to solve the problem
    Regards,
    Swati

    Hi,
    you have to map the EP user to an employee at the backend for the ESS services to work.
    Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
    This will solve the issue.

  • Form HR_SGTAXIR8A2002 does not exist

    Hi,
    When I try to run the IR8 form from Portal ESS I get the following exception:
    "Form HR_SGTAXIR8A2002 does not exist"
    It is a sapscript form. I used se71 and activated the form (but first I copied it from 000 because it was not available in our client). The language EN seems to be ok.
    1. Am I missing some steps for activation?
    2. Where can I see the program/transaction where this form is used? Is there a configuration table containing the sapscript forms and associated programs?
    Any help is appreciated.
    Thank you,
    Adalbert
    PS: I know what report the Portal is calling: RPCT8AR0_01. The report did run fine in R3 from the beginning. The problem is that the report is NOT running in the portal even with all the IMG config done. Strangely, RPCT8AR0_01 never asked for HR_SGTAXIR8A2002 (I had to copy it from 000) even if the sapscript form was not in our client before the copy.
    After some debugging in se37 of HRXSS_SG_IR8A_GET_PDF I see that the report is looking for the form definition in table STXFADM. The form is not in the table (but I can edit it with se71). How can I get the form in this table?
    Message was edited by: Adalbert Kovacs

    1. Yes, I get the error after using SE71->Utilities->Copy from client.
    2. I am not familiar with "driver programs" but I checked the following tables:
    - STXFADM
    - TNAPR (I think this is for Smartforms actually)
    I don't have the form in any of these two.
    So, to reformulate the problem, the error is generated by a missing entry in table STXFADM. This is a sapscript form, not a smartform. What is the table STXFADM used for and how can I add my form to the table?
    Thanks,
    Adalbert

  • Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.

    We are on mySAP ERP 2004, and using ESS 60.2 version.
    In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
    "Service EMPLOYEE_ORGCHART_SERVICE does not exist".
    Has anyone come across this?
    Any suggestions on how to fix this is highly appreciated with points.

    Hello John,
    The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
    Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
    Service Short Key - EMPLOYEE_ORGCHART_SERVICE
    If its not there then you need to create one entry like this:
    Service Link Text    Orgchart                                                    
    Service Type         WebDynpro application                                       
    Link Resource       EMPLOYEE_ORGCHART_SERVICE
    Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
    This entry will have following details if its exists(else create with following details):
    Resource Key         EMPLOYEE_ORGCHART_SERVICE
    Description     Orgchart                           
    Server                                             
    Directory Path  sap.com/ess~org                    
    Object Name     Orgchart                           
    URL Parameter                                      
    Window Name          Orgchart                      
    Window Properties                                  
    URL for PCD Page:
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
    After maintaining these entries it should work.
    Regards,
    Shubham

  • Error: Selected disk does not exist (21) Module-SRE-700

    Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin     
    Keyfile Size 202814577 over limit 32768 will not burn into flash
    ServicesEngine boot-loader> verify                                            
    Loading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    Unrecognized command
    ServicesEngine boot-loader>                                                   
    #service-module sm 1/0 session
    Trying 172.20.245.1, 2067 ... Open
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Trying to reset Service Module SM1/0.
    May  7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    þ
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  
    Now booting from primary boot loader....  
    Authenticating boot loader....  
    Primary Boot Loader Authenticated - booting....  
    Please enter '***' to change boot configuration:
    Detect and Initialize network device
    Backup current platform configurations....
    SRE step 1 - SM registration...
    Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
    Local install not supported
    Response - no installation needed (len: 422)
    SRE Installation Not Needed
    Restoring orignial configuration...
    Updating flash with bootloader configuration.
    Please wait ................... done.
    May  7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
    Error: Selected disk does not exist (21)
    Unable to boot image
    ú
    Initializing memory #1. Please wait...
    Initializing memory #2. Please wait...
    This may take a minute....
    Serial ATA Port 0 : Hitachi HTE545050B9A300                
    DDR Memory 4096 MB detected
    Intel(R) Core(TM)2 Solo CPU    L3400  @ 1.86GHz
    BIOS SM 3.52.8,  BIOS Build date: 02/08/2011
    System now booting...
    Please wait... 
    Please press P to select Primary Boot Loader ...  
              or S to select Secondary Boot Loader ...  
              or wait to boot from default configuration ...  

    Hi,
    Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
    1. uninstall existing SRE-V software
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
    2. run sm-hw-util to set sata mode to IDE
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
    3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
    ip route 255.255.255.255 SM slot/0
    4. install WAAS:
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

  • Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID:

    Expert,
    I did the following steps to upgrade the OWB repository from 10g to 11g
    • Created a dummy workspace in the 11.2 repository
    • Created users in the destination environment
    • Run Repository Assistant against the 11.1 source database
    • Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
    After 99% of completing I have got the below error
    Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID: 65314
    Please let me know the solution.
    Thanks,
    Balaa...

    Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
    Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
    refer
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    This will give you info about your missing ACL
    Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
    please refer :
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
    Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
    Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
    Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
    It might resolve this ACL issue but it did not work for me.
    If none of these work then
    Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
    It worked for me.
    Varun

  • Create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain

    I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain.  Here is the script, need help at bottom
    =======================================================
    Set objShell = CreateObject("WScript.Shell")
    objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
     IF Right(objComputer,3) = "000" Then
    Else
     strShortcut = objShell.SpecialFolders( "Desktop" )  & "\%username% Share.lnk"
      strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
    Set objLink = objShell.CreateShortcut( strShortcut )
     objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
      objServer=Left(objComputer,7) & "-000"
     objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
      objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
      objLink.Save
    End If
    =======================================================
    if "C:\Users\%username%\desktop\%username% Share" exits do nothing
    if not create the folder and share it with everyone read only
    ======================================================
    The section directly above is what I need to add, anyone have a clue how to make this work?

    Bill:  Can you suggest a site?  I am in the weeds here trying to get this done yesterday.  I have been reading code and trying to figure this out since yesterday morning.  I have to roll out this image to 2 dozen machines and
    this is holding us back.  Any idea which site I can post to for help?
    The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you.  That is why I have repeatedly suggested that you hire a consultant.
    The link to the learning material is at the top o this page.  You can also search the web for Windows consultants.
    In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
    Look up and research the FileSystemObject.
    ¯\_(ツ)_/¯

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • Transporting Process Chain - error  Source system does not exist

    Hi,
    I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
    However, I got the following transport error: Source system does not exist
    =======
    Diagnosis
    Source system  is not known.
    System Response
    The imported data for DataSource  was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
    Procedure
    Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
    You get to maintenance using Tools -> Conversion of the logical system names.
    ============
    I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
    And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
    FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
    Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
    Thanks

    Hi,
    This error is due to the fact that the
    mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
    You need to maintain table RSLOGSYSMAP in each system
    You can find the steps to do it in the attached note 127326:
    o  Maintain table 'RSLOGSYSMAP' in the target BW with view
       'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
       This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
    This source system reference in turn is absolutely necessary to activate the transfer structure.
       Example:
       Source BW with source system AAA.
       Target BW with source system BBB where the source system AAA
       corresponds to the source system BBB.
       Entry in RSLOGSYSMAP in the target BW:
       Original source system: AAA, target source system: BBB.
       Give the DDIC user in the source BW in client 000 the
       authorization profile S_RS_ALL to create BW objects.
    Cheers
    Rajesh

Maybe you are looking for