Short dump with Where-used list
Hi All,
I'm making some research on specific InfoObjects, and in some cases I want to know where are they being used, but when I try to use the icon for "Where-used list using Data Warehouse" I end up with an error, a short dump.
Message class is: RSQBW
Trigger Location of Runtime Error:
Program: CL_RSQ_ISET_SERVICE===========CP
Include: CL_RSQ_ISET_SERVICE===========CM016
Row: 136
Module Type: (METHOD)
Module Name: EXTEND_FIELD_BUFFER
Does any one can help me to understand why is this going on and how to solve this?
Thank you!!
Miriam
Hi Miriam
In the short dump you should also see the name of the infoset in question.
You probably have to adjust the infoset in transaction RSISET and they try to run the where used list again.
Best Regards,
Vincent
Similar Messages
-
How to solve problem with where-used list?
I've the problem that in many places of my FPM (floorplan manager, web dynpro) code the where-used list does not work anymore because the FPM functions force the developer to specify structure of column names by literals. So for example in the UIBB's GET_DEFINITION methods or when using the following piece of code in some PROCESS_EVENT function:
CASE io_event->mv_event_id.
WHEN if_fpm_guibb_list=>gc_guibb_list_on_cell_action.
io_event->mo_event_data->get_value(
EXPORTING
iv_key = if_fpm_guibb_list=>gc_event_par_column_name
IMPORTING
ev_value = lv_col_name
if ( lv_col_name = 'FOO' ).
endif.
endcase.
Here one must comapare (line 9) the variable lv_col_name with some literal containing the name of an element of a structure. So the where-used list on STRUCT-FOO does not find this source. Is there any way to fix this problem? I thought to use RTTI for it, but could not find any way to do this. Possibly, is there any pragam or pseudo comment to update the where-used list of a specific structure at a given place?The point is that when I start using RS_ABAP_SOURCE_SCAN I have to remember to do this I don't like the situation that after changing some name of a structure's element, the source code of the whole application is correct, no error will occur but the behaviour of the application may be totally wrong. Possibility a better solution will be to add some constants containing the structure element names to the model class of the FPM application.
-
Bizarre situation with the "Where used list" for a table updated by FB50
Hello all,
I use the "where used list" (all check boxes selected) function in SE11 to find out where and how the table FMGLFLEXT (General Ledger Public Sector: Total) is being used and updated. All I get is a reference to a function module, namely G_POSTING_FMGLFLEXT. When I do a "where used list" (once again, all check boxes selected) for the FM, I get the message: Function Module G_POSTING_FMGLFLEXT not found in selected search area Message no. ES120 despite the fact that all check boxes are selected.
Yet this table contains data which were put in there via transaction FB50 (G/L Acct Pstg: Single Screen Trans.). So somehow, somewhere this data was created and put into the table.
I dont get it! What am I missing?
Thank you for your helpThere could be several reasons for this, including:
- The cross reference tables (used by the "where used" functionality) have not been updated in the system you are logged into - check with your Basis team on this as the programs that do this (a) run for hours and (b) take up a fair chunk of database space.
- The data may be stored via dynamic SQL (e.g. "insert into (g_tab_name)") so the table reference doesn't show up
- The function module may be called dynamically so the FM where used doesn't reflect this
You could try, instead, using the ST05 SQL Trace to track what code is updating the table when you run FB50.
Jonathan -
Traceability with batch class characteristics in batch where used list.
Hi,
I have a process order which issues 5 pallets or material and produces 5 pallets of another material. Each pallet is a seperate batch in my scenario.
All materials are assigned to a batch class and i will be using a class characteristic to enter the issued pallet number (includes material number and batch number) to the produced pallet batch. This way i want to create a traceability system.
the problem is i need a way to create a hierarchical view or integrate this scenario to batch where used list.
there is a badi for where used list to read external data. but i guess that is for something called "external batches"
can you please guide me for the best practice of doing this?
Thanks,
Alper,Hi!,
I think you have to use the mix of two functionalities:
1. Original batch function
2. Batch derivation
This way you can pull the characteristics of the source material batch in to raw material as well as finish material batches.
In this you have to create a nonvaluated material which is used as original batch mateial. You have to assign this material in material master of the RM and FG alongwith other required entries. Also you have to use batch derivation function to pull the charactristics of this original material batch in to the RM and FG.
Please go through the SAP help regarding Original batch and Batch derivation function to have more clarity.
Please revert back in case of any further issue.
Regards,
Uday -
Where Used List with multiple/range of material
Hi there Gurus!
We have requirement to have multiple material on CS15(Where-used List Single-Level Material).
IW13 won't work since there are spares/eqpmnt that has no PM Order yet.
We are looking at developing SAP Query for this using but I am reluctant if this will work since it's from bottom going up.
Has anyone tried this? Any tip/watchout?
Your very valuable input is highly regarded and will be rewarded.
Thanks a lot in advance!Hello Thyagarajan,
Thanks for clarifying the requirement.
Can only input one material in selection screen of CS15 and what we want is functionality to enable multiple material entry. Thanks!
Hi Pete,
Thanks for your input.
When you copy CS15 and modify to enable multiple material entry, what other options did you consider before deciding on copying CS15? Does your other options include SAP Query? Do you think it will meet our reqmnt? Thanks! -
Hi
I have one Zreport which gives the result in ALV form.
After getting the result(1 row with 33 columns) when I tried to export the ALV results to spread sheet using the option : List-> Export-> Spread Sheet OR by click on Excel icon in the display screen,I'm getting the short dump with the description "No more storage space available for extending an internal table" .
After analysis ,find that dump is raising in the FM : F4_GET_RESULT of Include Program : LSDH3U03.
Can anyone provide us some clue .
Thanks & Regards,
SreeramHi,
If the display is in ALV grid format, then you can try another approach to save the data in a spreadsheet.
- Right-click on any output cell.
- Select 'Spreadsheet' from the drop down list
- radio-button 'All available formats'
- Excel (In existing XXL format)
Thanks!
VS. -
Short dump with TPM_TRD1 000
hi everyone,
when I run the Tcode:TBB1,i come across a ABAP short dump error.
my system environment is:
PC
windows2003NT
oracle10.2
independant system without SLD control
The error info as follow:
Note 837202 - TPM_MIGRATION:tpm18: Short dump with TPM_TRD1 000
Summary
Symptom
You migrate from Release CFM or Enterprise 1.10 to ERP 2.0 or higher. There are already parallel valuation areas in use. In tpm_migration_cat, you specify a key date. In the test system, the following short dump occurs for the parallel valuation areas:
Error message short text:
Internal error: SLD
Message class: "TPM_TRD1"
Number: 000
Variable 1: "SLD"
Other terms
CL_DISTRIBUTOR_SLD, TPM_TRD1000
Solution
In the production system, you have to carry out tpm18 before the technical upgrade for all business transactions that are before the key date from tpm_migration_cat.
I do not understand how to do with the soluton
eg.what is "tpm18"?
Do need your helps,
Thank you very much
PeterHi Peter,
I guess you found note 837202 when you were looking for a solution for the TBB1 dump you encountered.
This note deals with a special situation when executing tpm18 (which is the transaction for fixing and posting derived flows) in a test system after migration and it tells you you should run tpm18 in production before the technical upgrade.
I am not sure if this really applies to your situation, maybe you should rather check if note 821854 and the solution therein can be helpful.
But without more information (e.g. knowing more about your release, your 'migration history' and the part of the coding where the dump is raised), it is quite difficult to give a diagnosis.
Maybe you should think of sending a customer message to SAP support via the SAP marketplace if you cannot get rid of this problem on your own. -
Has anyone else had this issue? All help appreciated.
I am using the function CSAP_MAT_BOM_OPEN to update a BOM. Running it generates a short dump with the following information:
In PERFORM or CALL FUNCTION "CONVERT_MATNR_TO_INTERN_FORMAT", the actu
al parameter "MATERIAL" is incompatible with the formal parameter "I_M
ATNR".
At first I thought my variable for the material number was bad so instead I gave it a literal value just to see if it gave me a problem and it did.
Here is the snippit of code from my program where I give it an actual value:
call function 'CSAP_MAT_BOM_OPEN'
exporting
material = '000000000000123456'
plant = '1000'
bom_usage = '3'
valid_from = '20140703'
importing
o_stko = tstk2
fl_warning = flg_warning
tables
t_stpo = tstp2
exceptions
error = 1.
Inside this SAP owned FM is the following:
perform convert_matnr_to_intern_format using material
changing csin-matnr
hlp_subrc.
convert_matnr_to_intern_format says this:
form convert_matnr_to_intern_format
using value(i_matnr) like csap_mbom-matnr
changing o_matnr like csin-matnr
value(subrc) like sy-subrc.
data: conversion_call(30) type c value 'CONVERSION_EXIT_?_INPUT',
conve(5) type c,
conv_exit(10) type c.
clear subrc.
check not i_matnr is initial.
describe field csin-matnr edit mask conv_exit.
move conv_exit+2(5) to conve.
replace '?' with conve into conversion_call.
call function conversion_call
exporting
input = i_matnr
importing
output = o_matnr
exceptions
not_found = 04
length_error = 08
too_long = 12
wrong_mask = 16.
subrc = sy-subrc.
endform.Hi Richard,
in fm CSAP_MAT_BOM_OPEN there is a single call of form convert_matnr_to_intern_format:
perform convert_matnr_to_intern_format using material
changing csin-matnr
hlp_subrc.
where material is defined in the fm interface:
function csap_mat_bom_open.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(MATERIAL) LIKE CSAP_MBOM-MATNR
In the form interface I_MATNR in include LCSAPFC1 is defined identically:
form convert_matnr_to_intern_format
using value(i_matnr) like csap_mbom-matnr
changing o_matnr like csin-matnr
value(subrc) like sy-subrc.
So importing parameter of type CSAP_MBOM-MATNR is passed to field I_MATNR of type CSAP_MBOM-MATNR and there can't be any type conflict, if
there is no modiffication in your system
fm CSAP_MAT_BOM_OPEN and include LCSAPFC1 are active
no parts of function group CSAP have been overwitten by importing a transport request into your system
Please check this code snippets against those in your system.
What can you do, if all is looking okay:
Check the version history (fm and include) for suspicious transport requests.
If no transport requests found, try to regenerate the fm, th include and the whole function group.
Regards,
Klaus -
Where used listing for Query Variables
Can someone tell me how to get this list from the metadata repository or from the transport connector?
I have read this thread "where used" list for BEx variables but this isn't working for us.
Is there some config that is required which we have missing?
We are running BI7 SP19 if this helps.
Thanks
CraigArun,
Yeah I figured as much, but this is why I am thinking we have something missing, config or otherwise.
Cause all I get when I do this is a new window with just the Variable details and nothing else, no where used list at all i.e.
Page Creation Date: 17.03.2009 15:12:03
Technical name: V_FSTMONTH
Object version: Active version
System: BWDCLNT200
Description (Short): 1st of Month to Toda
Description (Long): 1st of Month to Today
Last Changed On 17.03.2009 13:25:39
Last Changed by ARMSTEC
Is there something I need to get our Basis Team to do ?
Thanks
Craig -
Short dump with an error SAPSQL_LIKE_QUOTES
Hi,
today we have more short dumps with an error SAPSQL_LIKE_QUOTES. this means The logical condition contains a text field literal, for which there is no closing quotation mark.
as per my analysis i found the below code from the std. sap program SAPLBTCH in that include LBTCHF19.
TRANSLATE p_buffer1 USING '*%'.
IF p_buffer1 CO '% '.
IF NOT i_mandatory IS INITIAL.
CONCATENATE i_name '<> ''''' INTO o_where
SEPARATED BY space.
ENDIF.
EXIT.
ENDIF.
can you please tell me that there is a sapce in the line IF p_buffer1 CO '% '.
please advice me if this statement is true or should not contain any spaces between the quotations.
Thanks,
KasiHi Kasi,
please check this link
[SAPSQL_LIKE_QUOTES|http://www.google.com/#hl=en&num=100&q=SAPSQL_LIKE_QUOTES&fp=1&cad=b]
Kind regards,
Clemens -
How to find out where used list of Table or T-code
Dear ABAP gurus
I know many of you have done this several times.
wish to find out which Transaction code INSERTs the data into the table IHPA.
I did the where used list - SE11 ( for specific key work called INSERT ).
Used the Table called D010TAB which has some information.
Vise versa if I know a T-CODE , how to know which tables it read & Modify...
any better procedure than spending hours in research...
I found similar custom program to find USER EXITS ...here..., looking soething similar...
[http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
thank you for your help
Edited by: Raj Anvesh on Aug 3, 2011 9:58 PMHi Anvesh,
Maybe the data INSERTION is happening by BAPI,
So just try to look for the concerned BAPIS.
ECP_SRV_PARTNERS_IHPA
IREP1_IHPA_ADRNR_PRE_FETCH
IREP1_IHPA_ADRNR_READ
MAP2E_DIIHPA_TO_PARTNER
MAP2E_IHPAVB_BAPI2080_NOTPARTE
MAP2E_IHPAVB_TO_BAPI_IHPA
MAP2E_IHPA_BAPI2080_NOTPARTNRI
MAP2E_IHPA_M_BAPI2080_NOTPNRI
MAP2I_BAPI2080_NOTPARTNRI_IHPA
MAP2I_BAPI_IHPA_TO_IHPA
PM_DB_FILL_DIIHPA
PM_PARTNERCOPY_FILL_XIHPA
PM_PARTNER_DELETE_XIHPA
PM_PARTNER_GET_XIHPA
PM_PARTNER_PUT_XIHPA
PM_PARTNER_REFRESH_XIHPA
these are the bapis which are dealing with the IHPA table,
Segregate them as needed and then go to the std program
Revert for further clarification.
Thanks
Sri -
Where used list of a function module
hello ,
i want to find out where used list of a function modules , but the problem when I try where used button with in a function module Im getting message saying 'Function Is Not An Include' when it is used in other programs. Function AKB_WHERE_USED_LIST does not exist.Function FUNC_GET_OBJECT does not show the names of the programs.Im Stuck..Plz advise.
Thanks in AdvanceHello,
This is working fine.
i am getting the name of the programs where the Fm is used.
In
OBJ_TYPE FUNC
OBJ_NAME FUNC_GET_OBJECT
Try this......... -
ABAP short dump with "CNTL_ERROR"
Hi,
I am getting an ABAP short dump with "CNTL_ERROR" while using an input script. What do I do?
Thanks,
Sreekar.Hi,
Newer versions of SAP GUI and R/3 include external controls called as ActiveX (OCXs). ABAP code internally issues some commands to flush and refresh these controls. Since, when using GuiXT and input scripting, these controls are not created, and ABAP dumps. Use keyword "Enable controls" (without quotes on a separate line) in a screen block that has an ActiveX control.
Example:
Screen SAPLCOIH.3000
Enter "/Menu=4,1,5"
Screen SAPLSP01.0100
Enter "=No"
Screen RIPLKO10.1000
Enable controls
Set F[Group] "UG"
Enter "/8"
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Transport with return code 12 ,short dump with 'DBIF_RSQL_SQL_ERROR'
Dear All,
My trasnport contains infoprovider. DTP,transpformations, character realtionships , aggregation levels ,web templates, programs.
I got a transport failed with Return code 12, and it is showing message :
Program terminated (job: RDDEXECL, no.: 06031600)
See job log
Execution of programs after import (XPRA)
End date and time : 20101026060421
Ended with return code: ===> 12 <===
I have short dump with 'DBIF_RSQL_SQL_ERROR' exception 'CX_SY_OPEN_SQL_DB'.
in how to correct the error :
below is the detials.
Database error text........: "ORA-01578: ORACLE data block corrupted (file #
211, block # 79950)#ORA-01110: data file 211:
'/oracle/RBW/sapdata15/xbw_188/xbw.data188'#ORA-26040: Data block was loaded
using the NOLOGGING option"
did someone has the same problem .
Help is really appreciated.
Regards
VeeraI am afraid you will need to esclate this to BASIS team.. seems some issue with database
-
Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data
Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
DonHi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don
Maybe you are looking for
-
Command line program execution problem.
Hey there, I'm about to complete my Java thesis project, but I can't fix a problem: i have to find a command line programme (which is in python but i think its not a big deal) through a java programme. Getting some information around I ended up i cou
-
Hello Experts! Is it possible to handle errors generated in a program called with SUBMIT ? for example I am calling a program REPORT00 SUBMIT REPORT00 WITH PARAM_1 = 'X' AND RETURN. And say there are some validations in REPORT00
-
Configuring JSP's in Weblogic server 7.0
Hi, I'm trying to port my web application from weblogic server 6.1 to weblogic 7.0. I'm having a little problem with jsp pages in weblogic 7.0. Some of the text box controls which are populated dynamically in my jsp pages are getting populated with "
-
Where does the Iphone get the Contacts from?
I recently purchased an Iphone and set it up. When I looked at my Contacts, there were hundreds of Contacts in the Contact list. I recognized most of them, but I'm wondering, where did it pull the Contact information from? It seemed to have pulled th
-
Alright, I am wanting to make certain movie clips visible if the _root.variable equals 'i'. The dynamic text has a instance name on it, but am I using it correctly? for( var i=1; i<=6; i++) if(_root.element_fire == i) { ('fire_'+i+'_text')._visible =