Short key for copy does not work all the time now.

After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

I've plugged in my default mac keyboard and the short key copy still does not work.

Similar Messages

  • Scine installing FF4, I have to right click on a link to open it. Standard clicking does not work all the time.

    In most websites I have to right-click a link and select open in new tab or new window to get the link to open. I cannot left click on a link and get the link to open.

    Try disabling the Ask Toolbar extension.

  • Has anybody experienced the iPhone off switch not working all the time.

    I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue.  The off button does not work all the time, sometimes I have to press it multiple times and other times it just works.  The worst case is when it does not work at all, very frustrating.  I didn't expect this type of issue for a phone that is not even a year and a half old.
    I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue.  The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
    Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
    Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
    //*eggbox23

    @diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
    Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
    Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
    Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option.  I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures.  Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
    I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
    //*eggbox23

  • Home button is not working all the time

    I have started to notice that when I press the home button on my iPhone 4 it does not work all the time. This problems has only started to occur and was first noticed around three months back, however I did not make a big fuss out of this because it was not as often as it is now.
    Sometimes i find this extremely frustrating as it occurs even when the phone is locked and you are trying to bring up the unlock menu (which I know this can be done by using the wake up/ lock botton located on the top of the phone)
    but this also is a pain when it happens, whilst using an app e.g. playing a game and trying to text someone.  Because of the faulty this also makes multi tasking sometimes impossible.

    Try calibrating the Home button.
    1. Open a pre-installed app, such as Contacts
    2. Press and hold the sleep/wake button until the red slider appears
    3. Immediately release the sleep/wake button; press and hold the Home button.
    4. Hold until the red slider disappears.

  • The home button for my ipod touch 4th generation does not respond all the time, What do I do?

    The home button for my ipod touch 4th generation does not respond all the time, What do I do?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My optical drive on my macbook pro mid 2009 series is not working all the time.

    I have a Macbook Pro mid 2009 series and just recently my optical drive is not working all the time. At times it decides to not spin a disk that has been inserted in the drive. I am currently deployed in Afghanistan and this is one of the very few things i have to distract me from the day to day haul. This is something that just started to happen and its very fustrating since i have limited support for this.

    Another help source (if you haven't already done so).
    Go to your OS Help Menu.  In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to  your issue.
    You can also do the same in Disk Utility.  Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand.  Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Verbatim
    ==============
    Apple's Disc Burning Quick Assist
    http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
    http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
    *** Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs. ***

  • My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

    My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?

    Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
    If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

  • App Store "Option key for purchase" does not work to reinsatll Lion

    Hello,
    I was able to re-install Lion from the App Store
    by holding the "option key" while clicking on "Prchased" in the App store
    Since I upgraded to 10.7.1 this does not work anymore !
    Is it the upgrade to 10.7.1 that"s preventing a new download ?
    or
    Is it Apple that cancelled that access ?
    One way or the other how do I reinsatll Lion ? 
    Note: I have too many partition on my drive, so it did not create a "restore HD" for LIon
    Thanks

    My problem was resolved the following day, today. I went to the App Store then to Purchased. The associated button said Resume. Yesterday that had been totally unresponsive but today when I clicked it the download resumed for another minute or two and then Lion just installed. I presume that the system was just being pushed to the limit and beyond yeasterday.
    I hope that you have solved your difficulty - good luck!

  • The keys on my keyboard do not work all the time. I have to strike a key more than once before it appears on the screen.

    I've changed batteries on my wireless keyboard with no help. It is a Wireless Keyboard 1000. I'm thinking it could be caused by an addon, but not sure which one.

    Fast answers:
    1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
    https://discussions.apple.com/thread/3819550?start=0&tstart=0
    2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
    3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

  • H:commandLink not working all the times

    Hi,
    I am working on an application, with JSF and Spring. In the application I have one page containing a h:dataTable containing records from database. The first column in the dataTable is a commandLink on click of which I need to call method frmo managedBean defined in the action tag.
    The problem regarding the above scenario is that the commandLink is workign alternate times, like when the page loads first the commandLink will work fine calling the action method in the managedBean but when I click the same link second time it does not call the method in managedBean, then third time it works again fine. My managed Bean is in session scope.
    I need to open the details of the link in a new window which will be opened using target="_blank".
    Can anybody please help me regarding the above scenario and giving me any solution why the hypelink is behaving like this.
    Thnak You in advance.
    Edited by: rBond008 on Aug 21, 2009 1:51 AM

    i am facing the same problem.
    I have a view in session scope and which opens in multiple pages on clicking <h:commandLink target="_blank">
    in a datatable.
    The thing is page is opening fine for the alternate clicks and all command links in parent page are not functioning properly.
    They are working properly at alternate clicks.
    I found the problem from debug logs as the form is not getting submitted on alternate clicks which is making the framework to quit the "*INVOKE_APPLICATION*" phase.
    i tried using onclick="javascript:submit()" as part of each command link but it is not working fine all the time.

  • A/R Invoice linked object not working all the time

    I have a LinkedButton that is set to SAPbouiCOM.BoLinkedObject.lf_Invoice. When the selected A/R Invoice has a Document Type of Service the link works. When the selected A/R Invoice has a Document Type of Items the link does not work and I get the following error:
    "No matching records found 'A/R Invoice' (ODBC -2028)"
    I there another property that I should be setting? I could not find anything.

    Hi,
    I've added a code sample that works fine for me.
    add this code to a simple vb project with the correct references....
    1. Enter a number of the Invoice you want
    2. click on the second EditText to set the linkedButton
    3. click the LinkedButton
    <i>Public WithEvents m_App    As SAPbouiCOM.Application
    Private Sub Class_Initialize()
    Dim oForm As SAPbouiCOM.Form
    Dim oDBDS As SAPbouiCOM.DBDataSource
    Dim oItem As SAPbouiCOM.Item
    Dim oLB As SAPbouiCOM.LinkedButton
    Dim oST As SAPbouiCOM.StaticText
    Dim oET As SAPbouiCOM.EditText
        Set m_App = getCurrentApplication()
       ' m_App.MessageBox "You have COM UI connection"
        'form
        Set oForm = m_App.Forms.Add("UUID")
        oForm.Height = 150
        oForm.Width = 400
        oForm.Top = 100
        oForm.Left = 400
        Set oDBDS = oForm.DataSources.DBDataSources.Add("OINV")
        'Edittext
        Set oItem = oForm.Items.Add("EditT", it_EDIT)
        oItem.Left = 200
        oItem.Width = 40
        oItem.Top = 50
        oItem.Height = 15
        Set oET = oItem.Specific
        Call oET.DataBind.SetBound(True, "OINV", "DocNum")
        'static
        Set oItem = oForm.Items.Add("StaticT", it_STATIC)
        oItem.Left = 50
        oItem.Width = 100
        oItem.Top = 50
        oItem.Height = 15
        oItem.LinkTo = "EditT"
        Set oST = oItem.Specific
        oST.Caption = "Business Partner Code"
        Set oItem = oForm.Items.Add("EditT2", it_EDIT)
        oItem.Left = 200
        oItem.Width = 40
        oItem.Top = 80
        oItem.Height = 15
        Set oET = oItem.Specific
        Call oET.DataBind.SetBound(True, "OINV", "DocNum")
        Set oItem = oForm.Items.Add("StaticT2", it_STATIC)
        oItem.Left = 50
        oItem.Width = 100
        oItem.Top = 80
        oItem.Height = 15
        oItem.LinkTo = "EditT2"
        Set oST = oItem.Specific
        oST.Caption = "Business Partner Decs"
        'linked button
        Set oItem = oForm.Items.Add("Linked", it_LINKED_BUTTON)
        oItem.Left = 180
        oItem.Top = 50
        oItem.LinkTo = "EditT"
        Set oLB = oItem.Specific
        oLB.LinkedObject = lf_Invoice
        oForm.Visible = True
    End Sub</i>
    Regards,
    Yaniv G.
    SDK Consultant,
    SAP Manage Israel.

  • The multi-tabs is not working all the time. Windows7 Firefox 4.0.1 I have the correct opetions set for multi-tabs.

    The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.

    Right click a tab and you will get the option to bookmark all tabs. Or use keyboard '''Alt + B''' which opens the old style menu. You can make changes to Firefox, as explained in this post: [/questions/799856#answer-155765]

  • Why does my iPad volume not work all the time

    My iPad volume works only part of the the time. Is there something I'm doing wrong?.

    My iPad volume works only part of the the time. Is there something I'm doing wrong?.

  • Why does my home button not work all the time

    Im getting really mad at my phone need some help my home button dont want to more more then over half the time what is wrong with it any body have a clue or having the same problem???

    Possibly the flex connector of the charging dock, flex ribbon (#4) is not perfectly seated down to the logic board.

  • Ringtones and Message Sounds not working all the time

    Call sounds & message alert sounds don't always work on iPhone 6.
    When I check settings etc, it should all be fine. And it's not on silent.
    I've tried resetting.
    Anyone else have this issue?

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

Maybe you are looking for