Should i wait for ipad 3

should i wait for the iPad 3 or should i go buy an iPad 2 now ?

up to you. I pad 3 may come after the first of the year, it may not come til 2013. Up to you how long you want to wait.

Similar Messages

  • Should i wait for the iPad 3 or get the iPad 2. my birthday is only less than a month away but rumours are that it will be released around my birthday

    should i wait for the iPad 3 or get the iPad 2. my birthday is only less than a month away but rumours are that it will be released around my birthday

    Check with sites like MacWorld, engadget, iLounge, MacRumors, CNET. Latest talk is an early March announcement.

  • I have an iPad 2 and is it worth upgrading from iOS 5.1 to 6.0 and should I wait for further stable updates ?

    I have an iPad 2 and is it worth upgrading from iOS 5.1 to 6.0 And should I wait for further stable updates?  As I have there are app compatibility and security issues on ios 6.

    Most users haven't had problems with iOS 6, however, some have. I'm still using iOS 5.1.1 on my iPad 2. There is a beta version iOS 6.1 being tested. Don't know when it will be released. When it is released, I'll update.
     Cheers, Tom

  • Should i wait for the new i pad or buy the current one

    should i get the new ipad 2 or should i wait for the ipad 3?

    No iPad 3 has been announced yet. If the current iPad does what you need, and you can afford it, then you might as well get one now and start getting use out of it - unless you want to wait an unknown number of months for a un-spec'd/unnounced product

  • Final Cut Studio 2. Should I wait for 3? And which new Macbook Pro

    Hi,
    I'm in need of some advice. I have used Final Cut pro since it's early days having owned 1,3 and 4.5HD. I also used Motion 1 a fair bit. My video editing worked declined in the last 3 years so I didn't upgrade my software and computer as it wasn't necessary. BUT things are getting busy for me again and I have quite a few projects to complete in the next year and motion 1 and FCP 4.5HD just don't make the grade anymore (actually I love 4.5 but motion 1 was always buggy). the 17 isn't out of my budget but in terms of convenience I don't want to go that route again (I now have a 17inch PB from 2004). My questions...
    1. Should I wait for FCS 3? I heard it will be released this OCT. I don't want to have to pay 700bucks foor an upgrade to FCS3 only a few months after I get 2. Is 2 plenty good enough?
    2. Should I get the 15inch 2.66 with dedicated 9600/256mb or 2.8 with dedicated 9600/512 graphics card? I'm thinking the 2.8.
    apart from this point there isn't much difference between the 2 computers (along with L2 cache)

    1) There is no set release date for FCS 3 (sad but true) in fact there is no "official" information anywhere that confirms FCS3's existence ... whatever you've heard or read is pure speculation and basing purchasing decisions on such might be a tad risky. My advice would be that if you need FCS2's functionality right now then buy it now, especially if you are working commercially (ie you're going to get paid for this) ... but if you don't need it yet then common sense would be to bide your time.
    2) Despite your reservations, get the 17" MBP. There are no current 15" MBP's that are a good long term purchase suitable for professional editing work. How long do you expect to use this purchase? 1 or 2, maybe 3 years? or 5 years? Sooner or later you will want or need to connect a bigger, better, faster storage system to your laptop in order to keep up with your editing needs, especially as we hurtle towards affordable Digital Cinema solutions for consumers and pro's alike. NONE of the current 15" laptop lineup for Apple offers ANY suitable form of expansion facility. Sadly they have dropped their "Pro" appeal, at least with respect to Pro video editing needs.

  • My programs don't work anymore with Lion!!!! Help me! Should I wait for patches or reinstall Leopard????

    My programs don't work anymore with Lion!!!! Help me! Should I wait for patches or reinstall Leopard????

    Which programs?  If they are very old (PowerPC) applications they will never work on Lion.

  • TS4062 ipad frozen, tried reset from rec. mode, usb cable showing on screen, waiting for ipad, then ipad fails to respond. what can i do?

    ipad mini froze when charging, have tried all restore options, when i get to waiting for ipad in itunes when restoring in recovery mode the usb cable disappears from the screen, the apple logo appears then the recovery line beneath logo, then there is no further response from ipad. have been trying to resolve this issue for couple days now very frustrated. can anyone help please?

    Use the charger that came with the iPad or a name brand charger of equal or greater capacity. Plug that into a known good wall outlet. Then wait at least an hour. While the iPad is still plugged in to the charger reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    If the iPad restarts continue to charge it until the battery is at 100%
    If the iPad does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Should I wait for the release of FF 4 to install on my new laptop?

    I have a 3.x version of FF on my "old" laptop, but I bought a new laptop a couple of weeks ago and want to install FF4 on it. Q: should I wait for the full release of FF 4 to install on the new machine, or would it be "better" to download FF 3.x first?

    Personally I would use the Firefox 4 release candidate.
    The current Firefox 4 release candidate will become the official Firefox 4 release providing no bugs are found that force a new version to be created. If there is a second release candidate, those using the first release candidate will automatically be updated to the latest version. It is still undergoing quality assurance testing but so far no showstopper bugs have been found.

  • How do I call the subvi in parallel with main VI. Main vi should not wait for the subvi

    I have a subvi which takes the parameters like port name, transmit rate, message to transmit over serial port and Start/stop flag. This subvi calls VISA write vi in a loop continuously, till the Start/Stop flag is false, to write a message to serial port at a mentioned transmit rate. This subvi will be called from another VI. Actual intension is to transmit different messages to different ports continuously and stop them when required. In this senario, please provide solution for below points:
    1. How do I call the subvi in parallel with main VI. Main vi should not wait for the subvi.
    2. How does main vi can control already running subvi in parallel to it. In the above example I would like to start the subvi from main vi when start\stop flag is true and would like to stop it when the flag is false.
    3. How do I call the subVI with one set of parameters from main vi, when same subVI is running with other set of parameters already from main vi(subvi being called in a case with different set of parameters each time when the case is called). Means, how do I keep track of reentrant subvi (different calls to same vi)from the same main vi.

    Hi Dharani24,
    Try if these are helpful,
    http://digital.ni.com/public.nsf/allkb/DB92C44E7D4D8A1B862577CB007D9C45
    http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/asynchronous_vi_calls/
    http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/reentrancy/
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • I am about to buy my first Macbook Pro, should I wait for the possibility for a 2015 macbook, or just get the most recent model currently? (9-22-14)

    I am about to buy my first Macbook Pro, should I wait for the possibility for a 2015 macbook, or just get the most recent model currently? (9-22-14)

    No one knows if there will be a new model and if so, when that would be. However, there always will be something bigger, better, and newer around the corner, so you'd be waiting forever.
    Buy it when you want or need it.
    FWIW, here are the specs of the latest models (which happen to be mid 2014):
    Apple - Support - Technical Specifications

  • HT4623 Itunes is restoring the software on this Ipad. But nothing done. Always "Waiting for Ipad". On Ipad, only is there Apple logo.

    Itunes is restoring the software on this Ipad.
    But nothing done.
    Always "Waiting for Ipad".
    On my Ipad, only is there Apple logo.
    What do I do now?

    How long has it been displaying the Apple logo? Does it have a progress bar underneath?
    If you feel like it's been that way for too long, try putting the iPad in Recovery Mode:
    Leave it plugged into the computer. Hold the home and power buttons at the same time until the screen goes black and the Apple logo reappears. At that point, release the power button but continue holding the home button until iTunes on your computer says "iTunes has detected a device in Recovery Mode." Then click "Restore" in iTunes.

  • HT201263 in restoring process,"waiting for ipad" is written in itunes after that it get stuck

    in restoring process,"waiting for ipad" is written in itunes after that it get stuck

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
     Cheers, Tom

  • Ipad 2 stuck DFU mode when restore stuck on waiting for ipad apple logo

    After updating ios 7.01 after a week or less it went blank. After that fixed on itunes restore and update. Gone on 7.04 latest hangs for the 1st 2nd 3rd waiting for ipad....  And finally installed. After 1 day, ipad is on DFU mode and when prompted to iTunes recovery mode restore and update... It hangs saying waiting for ipad no progress...  It stays on dfu mode.

    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Ipad 2 error 9 stuck in iTunes says waiting for iPad

    Hi,
    after updating iPad 2 it stucked... Nothing is working: hard reset does not work, changing ports do not work, turning off AV, firewall - doesnt work....Nothing.
    iTutnes showing, waiting for iPad, but it can waith for ages. I have change dock connector and still nothing.
    Please somebody, hel me....
    How could it die during update

    Cannot restore iPad: Unknown error (9)

  • TS1538 Trying to restore ipad 2 itunes recognizes ipad message is "waiting for ipad..."  Ipad only shows apple logo.

    Ipad 2 will not turn or restore. itunes recognizes ipad is in recovery/restore mode and is trying to restore ipad. Itunes has "waiting for ipad..." in the progress bar. Ipad only has apple logo on screen.
    Help!!

    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • HT201250 Can I shut down my mac in the middle of a time capsule backup?

    If I shut down my mac when time capsule is processing a backup, will it cause any problems?

  • LOGIC FOR CREATING Purchase Order FOR repective Purchase Requisiton URGENT

    hi all, guys i have got all the purchase requisition for the materials  from EBAN table. now i have to create the PURCHASE ORDER  for these PURCHASE REQUISITIONS. so how should i proceed. what logic i should use to create the PO for These PR. if anyo

  • PROBLEM WITH PRINTER SETTINGS

    HII FRNDS WHEN I AM TAKING OUT THE PRINT PREVIEW OF MY LAYOUT THROUGH TCODE IW32 I AM GETTING THE OUTPUT DISPLAYED BUT WHEN I AM TRYING TO TAKE OUT THE PRINT OUT THN I AM NOT GETTING IT . I HAVW SET THE OUTPUT DEVICE AS LP01 . AND WHEN I AM GIVING OU

  • Browser Viewing  / Testing?

    I must be mad , I'm a newbe but have some background .... great software ... problem I can make all the pages fine ,,,test them all indivigully they all show up 100% by themself in the browser ... but when I link the pages from the index page and the

  • Profiles for Nikon manual focus lenses

    I can't seem to find any profile for Nikon manual focus lenses.  Are those impossible to make with the profile creator?