Should Pegging Information be Transferred to SAP R/3? (Costumizing gATP)

Hello
In the costumizinh in gATP you find a checkbox "Pegg. Info". (SPRO>APO>gATP>generell settings>maintain golobal settings for availability check)
In the F1 Help i find that "Defines if pegging information should be transferred to a connected OLTP system."
Where could i find the pegging informatoin in r/3 from apo? (which table, transaction)
Thanks
Sven

Hi Sven,
This is an important setting for transfer of pegging relationship to ECC.
CTM creates constrained plans pegged to sales orders and GATP will use these pegging relationships ,
while processing sales orders when send to R/3.
You can check the pegging relationship in product view / pegging overview tab in APO or MD04 & MD09 in ECC.
Regards,
Srinivas.S

Similar Messages

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Sales Order Pegging Information

Hi All,
When we do the Availability check for line item of Sales Order in SAP, in which tables does Promise gets stored? Also what is the table which stores the pegging information?
Appreciate your help in advance.
Thanks,
Chandravadan

Sales and Distribution (SD) :
VBFA - Document flow (alg.)
VTFA - Flow shipping documents
Sales order :
VBAK - Header data
VBAP - Item data
VBPA - Partners in sales order
VBKD - Sales district data
VBEP - Data related to line items, delivery lines
Billing document :
VBRK - header data
VBRP - Item data
Shipping :
VTTK - Shipment header
VTTP - Shipment item
VTTS - Stage in transport
VTSP - Stage in transport per shipment item
VTPA - Shipment partners
VEKP - Handling Unit - Header Table
VEPO - Packing: Handling Unit Item (Contents)
Delivery :
LIKP - Delivery header
LIPS - Delivery item
Pricing :
KONH - Conditions header
KONP - Conditions items
KONV - Procedure ( billing doc or sales order)
KOND
Regards,
Rajesh Banka

Pegging information has not been calculate for [item] in this plan

Hello planners -
we ran across a strange thing today. We have an item in our unconstrained MRP with multiple demands and resulting supplies.
The last demand line (Sales Order MDS) shows pegging information has not been calculate for [item] in this plan - and only this line.
The item is set for End Assembly/Hard Pegging, the plan options have pegging enabled, and it works for all other demands.
Any idea why one demand line is excluded from the pegging calculation?
Thanks,
Christoph

On the surface, the item seems to have its supplies balanced to the demands – 9 sales order demands, and 9 supplies (planned orders and non-standard work orders).
A look under the hood shows some interesting things:
• The first non-standard work order is linked to a specific project (we use Seiban manufacturing).
• There is no demand for that project. That leaves the above work order hanging – it cannot be used for anything else, only this project.
• This work order also has an exception message “Items with excess inventory in a project/task” – makes total sense
• The last demand cannot peg to the existing work order, hence the somewhat misleading “pegging information has not been calculated in this plan” message
• The item shows one more interesting exception called “Demand quantity is not satisfied” – which is somewhat true.
The immediate solution is to take the project number off the work order. The next plan run has relinked all supplies and demands as needed.

First iView in the Role only transferred to SAP and next two ignored

Hi,
I have three iViews in a Role and when I transfer only first view is been transferred to SAP backend (wp3r) whereas the next two iviews are ignored. Is it something I have to change the iview properties ? Any ideas ?
I want to transfer all the three iviews with the role. Could anyone please help.
Many Thanks

Thanks Michael
When I tried changing the order of the iviews, I replaced the first iview with second one and it did
transferred second iview by ignored first (When I converted the role in wp3r i can only see second iview now before it was showing first iview).
Now, I did two roles for two iviews and they are transferred to backend alright.
When I upload the iview to the backend in wp3r i can see the portal role name, system then I have created the role and merged it, all in green lights. Can also view the iview under the authorization role i have created. Portal admin is not involved I'm doing all this stuff.
When you say Alias I hope you are talking about system Alias, which is anyways same for all iviews.
Thanks very much for you help.

Where can find information about cost of SAP support and maintenance?

I would like to get some information of cost of SAP support and maintenance, where I can find it?

SAP software licenses and maintenance vary greatly, the fees for onetime/annual maintenance are based on contracts.
To get a price list contact your local sales rep.
Markus

Need help in getting information/training material for SAP CRM (Functional)

Hello,
I am a SD Consultant.
I want to learn SAP CRM (Functional) on my own without going to any training institute or some thing.
Therefore, can anyone help me in forwarding the link(s) or document(s) with which I can learn about SAP CRM (Functional).
I want information/training material regarding SAP CRM 7.0 (on system/software working, not the general information, for example- why CRM, where CRM, etc)
For example, about org data, org structure, possible scenarios, etc.
Thanks in advance for spending your valuable time for me.
Regards,
T. Chaitanya
<<Moderator Message: Sorry, can't do. Search!>>
Message was edited by: kishan P

Hi Chaitanya,
Since You are already a SD Consultant, We assume you are very much familliar with SAP and for you CRM will also be not a big Deal.
Customer Relationships Management (CRM) is a model for managing any Organization's interaction with current and future customers. It involves technology to organize, automate and synchronize SALES, SERVICES(postsales) AND MARKETING(presales).
First of all you need to get SAP CRM installed in your system and then you need to get command over Account and Contact Management (Business Partner). The same can be learned using WebUI or GUI. From GUI the transaction launcher is WUI then web page opens up enter your credentials and select Role - Salespro. Open the Account and Contact section and do some R&D and you can learn. But in GUI you need to go to SPRO -> IMG -> Cross Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges & Groupings -> Define Number Ranges. Here you have defined number range then you need to assign to some group created from SPRO same way. And Finally maintain Business Partner using Tcode - BP.
Then You Learn Organizational Management which allows us to map our marketing, sales, service structure maintaining company's structure including the position and Employees in an Application and assign specific attributes to the otganizational units.
Path: SPRO -> IMG -> CRM -> Master Data -> Organizational Management -> Organizational Model -> Create Org Model/Change org model.
Just Go ahead and with some more R&D in the system and taking of F1 Help of SAP Documentation I think you can easily learn SAP CRM.
Regards,
Piyush

Need information/training material regarding SAP CRM Functional

Hello,
I am a SD Consultant.
I want to learn SAP CRM (Functional) on my own without going to any training institute or some thing.
Therefore, can anyone help me in forwarding the link(s) or document(s) with which I can learn about SAP CRM (Functional).
I want information/training material regarding SAP CRM 7.0 (on system/software working, not the general information, for example- why CRM, where CRM, etc)
For example, about org data, org structure, possible scenarios, etc.
Thanks in advance for spending your valuable time for me.
Regards,
T. Chaitanya

Hi ,
In the SDN lot of documents are there search in the WIKI.check the standard sap doc cr100.

Should i inform apple the serial num or imei of a lost iphone?

should i inform apple the serial number or imei of a lost iphone 4s?

Reporting a lost or stolen product
http://support.apple.com/kb/HT2526

Which type of data should I choose in transfering the R/3 table to Sap BI 7

Dear Experts,
I am transfering the one ABAP TABLE with all the fields from sap r/3 to sap Bi 7.0 system.
I went to sap r/3 system and by using SBIW I clicked on maintain generic data sources and I am in confusion , which type of data I should opt for transfering the R/3 table into BI system.
a) Transactional
b) Texts
c) attributes.
please explain me when to choose these 3 different options ?
waiting for a reply from you experts...
Thanks a lot

Thanks but I want to tranfer a Complete table with all the fields into sap BI system, so how can I proceed ,bcse may be the table contails all the types of data ie., master data attributes , texts and as well as transaction data,
I am in confusion ,please tell me the steps to transfer the table with all the fields( 72) in to sap system.
it would be helpful if you can spend some time for my question.

Need information about notification with SAP Netweaver Identity Management

Dear Experts,
I need some informations about send e-mail from SAP NIM. We want to send an e-mail after creation of sap users etc.
Please note that today we have a Domino/Lotus server.
I undertsood that we can send e-mail through the Identy Center (IC) component. But I did not find how to set up this solution? I did not find architecture informations?
Could you please provide me the different configuration steps?
Should I install another component? Or I just have to configure my SMTP Server?
Also, have you got the best practices for this step?
Thanks a lot for your help
Regards
Hocine NAÏ

Hello,
For notification, first you need to create a repository of generic type and provide the lotus notus host details in the repository constant.
Eg:
EMAIL_SERVER abc.def.com
EMAIL_ORIGINATOR orignator mail ID
Then create a task with the "To Generic" type Pass.
Select the name of the function below in the Next data entry of the Destination tab of the pass.
and provide the attribute and value as below:
MSKEYVALUE %MSKEYVALUE%
EMAIL_RECIPIENT recipients mail ID
EMAIL_SUBJECT Hello %DISPLAYANEM%
LOCATION %LOCATION%
Eg of a Function to sent mail is shown below:
function SendEmail(Par){
 Recipient = Par.get("EMAIL_RECIPIENT");
 Subject = Par.get("EMAIL_SUBJECT")
 Location = Par.get("LOCATION");
 Body = "This is a report from SAP NetWeaver Identity Center at %$ddm.date% %$ddm.time% ";
 Body = Body + "Your location is " + Location + " ";
 Body = Body + " ";
 Body = Body + "Best regards ";
 Body = Body + "MaXware AS ";
 UserFunc.uSendSMTPMessage("%$glb.EMAIL_ORIGINATOR%", Recipient,Subject,Body,"%$glb.EMAIL_SERVER%",1);

How sales order number generated in the SAP R/3 is transferred to SAP APO

Dear Experts,
During the creation of the Sales order in SAP R/3 an Purchase requisition is created in SAP APO and assigned with temporary sales order and when we save the sales order in R/3 the corresponding sales order number is attached with the purchase requisition in SAP APO. Is there any exits or BADI available while this Sales order detail transferred to APO or during this sales order details attached to Purchase requisition in APO side.
Many thanks in advance,
Senthil

Senthil,
During the creation of the Sales order in SAP R/3 a Purchase requisition is created in SAP APO
?? I guess you are talking about one of the planning procedures that executes 'Start product heuristic immediately', yes?
and assigned with temporary sales order
I guess you are talking about [Temporary Quantity Assignments|http://help.sap.com/saphelp_glossary/en/74/b171467944d3119b440060b0671acc/content.htm], yes?
Is there any exits or BADI available while this Sales order detail transferred to APO
Standard enhancements are
Sales order CIF enhancement on the ECC side
CIFSLS03 (outbound from ECC)
Sales order CIF enhancement on the APO side
APOCF010 (Inbound from ECC)
Best Regards,
DB49

What should the default tablespace be for SAP users

I'm using Oracle 10.2.0.4
For the users
OPS$<SID>ADM
OPS$ORA<SID>
SAP<SID>
what should the default tablespace be
PSAP<SID>USR or PSAP<SID>

Hello Bill,
> For the users
> OPS$<SID>ADM
For this user the default tablespace is SYSTEM
> OPS$ORA<SID>
For this user the default tablespace is SYSTEM
> SAP<SID>
For this user the default tablespace is PSAPPRDUSR
Regards,
Federico Biavati

How to retrieve information get in a sap table

Hello,
A sap program in my job chain reads a sap table. How can I retrive information of one of its fields and pass it in parameter in another step of my job chain ?

Hi,
The Z program returns informations in the job protocol, the question is how to parse the protocol to retrieve the string and put it in a parameter. I've been told that I can put a script in the "action" tag of the job definition as a post-running action. Where can I find an exemple of that kind of script ?
FYI : the z program returns the following sentence, "flux sortant : nouveau compteur =0002" and what I need is to get 2 as a parameter for the next step.
Re.

Information on how much SAP Business One can handle in throughput

Hi All
Is there any information on how much data SAP Business One can handle. I know in theory it only HDD space really set the limit but also thinking performance what setups do you have out there in terms of user, transactions per day, number of items, BP etc.
Example:
We have a potential customer who currently have 50.000 monthly subscriptions (0 lines invoice lines pr subscription) with an expected increase of 20.000 a year
So in 3 year they will have 110.000 * 12 * 10 = 6 million invoice lines pr. year the first year (+2.4 million new lines increase to that number)
Can SAP business One handle this amount of data in a way that have any performance at all (Server is not yet known) or in other words. When does SAP Business One become too small and we need to move to a bigger system?
Is there any task-forces in SAP we can contact for such?

Hi Rasmus,
You may check:
Discovered performance issues? Refer to our Performance Landing Page
Root Cause Analysis? What Root Cause Analysis?
Hope you can access the link given in the thread.
Thanks,
Gordon

Should Pegging Information be Transferred to SAP R/3? (Costumizing gATP)

Similar Messages

Maybe you are looking for