Show and Share Automatically Assign Permissions

I have been looking and cannot find a whole lot on SnS permissions.  Our DMS is version 5.3.11 and we are using embedded authentication.  We have a setup so when a user connects to the TCS(5.3) to record a video it then automatically sends it to our MXE3500(3.3.2.0) then from there it automatically distributes it to our Show and Share and assigns it a category based on what address was dialed.
What we want to do is have group and or user permissions assigned to the categories so only those users can see the videos.  Does anyone know if this is possible?
Thanks for any help!
-Scott                 

Hi
Integration with Active Directory :Cisco Digital Media Manager 5.3 provides integration with Microsoft Active Directory
via the LDAP protocol to import both names and groups from Active Directory. Cisco Digital Media Manager and Show and Share users are then authenticated against MS  Active Directory during the login process. By categorizing the uses into different user group within DMM, administrator can control and manage the content viewing permission within Show and Share by associating the user group to the video during the publishing stage. There are three Authentication Mechanism available: ‘Embedded Authentication’, ‘LDAP Authentication’ and ‘Federation Authentication’ .Currently, Microsofts Active Directory is the only LDAP service that is supported. You have to choose LDAP Authentication , as the attached photo
Thank you
please rate all useful information

Similar Messages

  • Show and Share: How to add thumbnail for uploaded by URL

    Hi all,
    I upload video by URL in Show and Share. Can I manually add thumbnail for video? and how to?
    Thank you very much.
    Bintasan Mokkamakkul

    As per docs, the default behavior for show and share is to assign a
    thumbnail based on the length of the video:
    Check out:
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
    TABLE:  Please match the # for each section:
    If your video is ... 
    1. less than 3 seconds long
    2. Between 3 and 8 seconds long
    3. 8 seconds or longer
    It uses this frame for the thumbnail...
    1. 0 seconds
    2. 4 seconds
    3. 8 seconds
    If you have a video that is longer than 8 seconds, but the title shot only lasts for 5 seconds, the automatically generated thumbnail may not contain your video title. Or, if you recorded a message, the system may have captured an unflattering facial expression for the thumbnail. Use this procedure to correct the situation.
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
    The procedure to modify the thumbnail is listed in the link above. You
    need to go to your uploaded videos and click "Edit Video" then follow
    the instructions above to move the slider where you want the thumbnail
    to be.
    Please keep in mind that video editing is only possible for some video
    formats:
    Table 6-1 Video Format Editing Support
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1080725
    I hope this helps!
    Cheers!
    T.

  • Presenter View During Live Events In Show and Share

    Hi,
    I am a bit confused about the user authorisation during live events of Show and Share. There is a user who is creating the event and publishing it. I think this user should be the moderator. He can see the questions tab and check the questions coming from the other participants and send them to the presenter view tab.
    I have found some information about the moderator and presenter in the user guide for show and share but I could not find out which user can be a presenter, or are the presenter and the moderator the same user or not.
    Below is from user guide:
    The live event moderator pre-screens these incoming questions and comments as they arrive. Moderators can:
    • Move any high-priority questions to the Presenter’s View tab. • Move any low-priority questions to the Removed Questions tab, either manually or automatically by keyword. • Use keyword filters to see and manage only the messages that match those keywords.
    . The presenter then responds to any number of these pre-screened questions and comments. (These are messages that the moderator moved to the Presenter’s View tab.)
    From the above information, it seems that there are seperate presenter and moderator, but is there a way to assign a user other than moderator only the presenter rights?

    Great question, Ken!  I too would like to know if there is a way to transfer video content management to an other author.  In the case that a user publishes content and later leaves the company, retaining control of the published material is a requirement.

  • Uploading YouTube videos/urls into Cisco Show and Share

    We've just purchased the DMM 5.2 and the Show and Share appliance to host internal company videos but there are some YouTube videos out there that we want to pull into our Show and Share system as well. How can we do this? I've tried every possible combination of youtube url and embedded url that is out there, at least nothing that I've tried has worked thus far. I'm able to pull in other internal URLs of different videos (wmv format) without any trouble. Is this an issue with YouTube or perhaps with flv formatted video that YouTube uses (which should work according to the manual).
    I know this is a new product, but is there anyone that can help?
    Thank you in advance,
    Chris

    Chris,
    The YouTube videos are typically Flash content.
    The key here is that you need to download the Flash content
    yourself and then Upload to the Show and Share.
    Use the DIRECT URL of the Flash Content on YouTube to download
    the FLV to you Personal device.  After file successfully download, simply
    upload the file to Show and Share.
    For example:
    Cisco Show and Share Flash Demo
    http://www.youtube.com/watch?v=ZzquCVvS0qQ
    * this link is the actual Dashboard URL not the video link
    http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
    * Actual URL of Video Content
    ========================================================
    FOR THOSE THAT ARE USING OSX & SAFARI:
    ======================================
    If you need to download FLASH Content for TESTING in your DMS Solution, You
    can download Flash Videos from YouTube.
    Note: The Video Quality is NOT HD or even SD...  it is ID (Internet Definition)
          Also, the downloaded file will be a .flv Flash File.
    1. Open a Video on YouTube, Google Video etc.
    2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
    3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
       Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
    4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
       the downloaded ".flv" file with VisualHub or VLC
    If this answers your question, Please take time to mark this
    discussion answered & rate the response. 
    Thank You!
    T.

  • Can't set File Hosting Locations on Show and Share

    Hi,
         I'm currently using Show and Share 5.2. I have it peered with the DMM and everything for the most part seems to be working fine. The problem that I'm having is that I can't seem to set and save the File Hosting Locations. I set it to store locally and it shows a valid password, but it will not save the setings. I've tried this in multiple browser: the latest firefox and IE. Any ideas?

    Are you using the Actual Appliances or are you testing with VMware images?
    Please gather and upload the following screenshots:
    * Go to the AAI interfaces for BOTH the DMM & the SnS.  Please provide a screen capture
      of the Pairing status screens for each appliance.
    * Go to the DMM --> Admin Module and get a screenshot of the services for the DMM & the SnS.
    Is there any error when trying to save settings?  Please provide the screen shot
    of that..
    Thanks
    T.

  • Uploading Youtube Vid. URL to Cisco Show and Share failed

    Uploading Youtube Vid. URL to Cisco SnS failed. I get error msg. : Connection to video server failed

    Chris,
    The YouTube videos are typically Flash content.
    The key here is that you need to download the Flash content
    yourself and then Upload to the Show and Share.
    Use the DIRECT URL of the Flash Content on YouTube to download
    the FLV to you Personal device.  After file successfully download, simply
    upload the file to Show and Share.
    For example:
    Cisco Show and Share Flash Demo
    http://www.youtube.com/watch?v=ZzquCVvS0qQ
    * this link is the actual Dashboard URL not the video link
    http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
    * Actual URL of Video Content
    ========================================================
    FOR THOSE THAT ARE USING OSX & SAFARI:
    ======================================
    If you need to download FLASH Content for TESTING in your DMS Solution, You
    can download Flash Videos from YouTube.
    Note: The Video Quality is NOT HD or even SD...  it is ID (Internet Definition)
          Also, the downloaded file will be a .flv Flash File.
    1. Open a Video on YouTube, Google Video etc.
    2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
    3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
       Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
    4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
       the downloaded ".flv" file with VisualHub or VLC
    If this answers your question, Please take time to mark this
    discussion answered & rate the response. 
    Thank You!
    T.

  • Show and Share integration with MS SharePoint?

    Does Show and Share have any integration with Microsoft Share Point?  Customer is asking, I don't see anything.

    Dear
    yes of course you can , kindly cheeck the below datasheet and the integration will be through API
    http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-477948.html.
    There is other option i just read about it few days ago  smarthub ASE.
    Thank you
    please rate if this will help

  • How to get cisco show and share

    Hi,
        I have a DMM with version 5.2 and saw that on my licesing I have show and share. But how do I install show and share? Can I install it on DMM server?Do I need to install it in another server? Where can I download it? I think the show and share installation is called SS-5.2.0.20.iso, but I do not found it on cisco support download section.  

    Mario,
    Show and Share(SnS) is an Appliance just like your Digital Media Manager (DMM).
    You have to purchase the Appliance from Cisco or a Cisco Partner.  Then you have
    to purchase use licenses for Authors etc...   The Appliance software is not separate
    from the hardware and is not downloadable.
    Please contact your Cisco Sales Rep or Account for further explanation and they
    can assist you with your companies needs.
    Thanks!
    T.

  • RSS Feeds in Show and Share

    Hi all,
    We have deployed Show and Share in our enterprise, and Cisco DMM with DMP licenses.
    We would like to integrate the Show and Share updates using the RSS feeds, is it possible to disable the authentication requirement for the RSS feed?
    Thanks in advance.

    Mail in Mountain Lion no longer supports RSS feeds. You have to install an RSS feed reader, as the message suggested.
    Regarding the Messages question, see:
    http://www.mactrast.com/2012/08/how-to-fix-imessage-syncing-between-iphone-ipad- and-mac/

  • Dynamic languague selection on Show and Share site

    Hi all,
    I would like to change wich language is shown on "show and share" website based on web explorer local language preferences. It is documented that language can be fixed by Administrator and later changed by customer but does not say anything about other customizations.
    Does any body know if it is possible?
    Thanks in advanced!
    Alex

    Hi Alex,
    I'm afraid this is not possible. The language can ony be changed manually.
    Regards
    Daniel

  • External file hosting for Show and Share

    Hi,
    If I only use FTP server (no external streaming server) for external file hosting, can show and share still play the video? Is there any other limitation beside video editing with this scenario?
    Thanks.

    Hi
    1- If your upload your files locally on your SNS , SNS will be the origin server and will be responsible for "RTMP and HTTP". For External hosting files which is highly recommended by Cisco , you have to use external streaming server and Wowza server or Adobe flash server and this will allow all videos .flv , MP4 , WMV,,etc displayed and without streamin server the videos won't be displayed. I hope to take a look for the below :-
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/admin/guide/filehosts.html
    Thank you
    please rate all useful information

  • No Thumbnails In Show and Share

    I am running Cisco Show and Share 5.3 with a Wowza media server and am able to play videos fine, but the thumbnails are not showing up.  I can see the thumbnails in the draft but when I publish the video the thumbnails are not displayed.  I don't get any errors when I publish the video.

    Normally thumbnails are stored in the default hosting location (*.*).  If this points to the Wowza server make sure the virtural directory pointed to in SnS is setup properly.  This is created on the Wowza server.  This is done by going to Start/Administrative Tools/Internet Information Services (IIS) Manager. Click on the plus sign next to the server name and in front of Sites and right click on Default Web Sites to Add Virtual Directory. Name your virtual directory and use that name in the URL in the default hosting location.  When you define the virtual directory point the directory to the file location defind in the default hosting location.  You should see the thumbnails in this directory on the Wowza server.
    Let me know if you have any questions
    John

  • Show and Share API : Uploading a video to a particular user group

    Hi,
    I am trying to find a API spec for uplaoading a vide in Show and Share portal for a specific user group. But could not find such thing as usergroup, but just the Content Viewership is available where we need to input all the ____USERNAME____ to upload with access to the users rather than a user group.
    I would like to know if anyone can direct me to upload to specific usergroup rather than user.
    Thanks in Advnace,
    JK

    Jeffrey,
    What is the content format of the ORIGINAL source comment?
    - download MEDIAINFO video analysis program from the web.
      http://mediainfo.sourceforge.net/en
    - After installed, file->open-> pick your source file with issue.
    - change the view to TEXT and copy\paste the results into a
      TEXT file and upload here.
    From the MXE, highlight the SnS-MXE job and right click and
    open the JOB XML.  Same thing save the XML code in a text
    file and upload here
    Sidenote:  did you download the DMSprofile.zip file from the web
    and install the DMS profiles in the profile directory?
    Thanks
    T.

  • Show and Share edit video and previews?

    Hi I am trying to add previews to all my published videos all the videos I have so far are .wmv and I realized SnS does not allow me to modify anything. But when I try to modify a video recorded from my webcam (.flv) it does allow modifactions and previws eventhough I can't the watch the published video recorded from webcam.
    Do these issues have to do with the fact that I have wmv and also flv files? If so, why I can't do to a wmv what I am allowed to do on a flv?
    Thanks!

    Hello,
    You can only edit .flv or .mp4 files within the Show & Share interface.
    The .wmv (windows media) files need to be edited or previewed externally.
    Make sure that your streaming server is running for the Show and Share.
    You can check this in the SERVICES tab of the Admin Module of the DMM.
    The Streaming server must be running to enable the editing feature for the
    Flash & mpeg4 files.
    I hope this helps!
    T.

  • Show and Share (SnS) Content Played on DMP-4310G

    Hi all,
    It's it possible to play video on demand from the SnS server?
    Is there any documentation that would provide me with the configuration and requirements?
    Thanks in advance

    Hi Mike,
    The document I sent to you just show how to set up the streaming points in Cisco Show and Share. What are you trying to achieve can be done by using the Cisco Digital Sign module from DMS solution,  which will allow you to send the videos to the Cisco Digital Media Player (DMP).  The Cisco Show and Share module is dedicated to the desktop clients as this is a video portal.   You might have to check if you have the license to run Cisco Digital Sign module.
    You might want to try to run the video in the DMP's as standalone too as long as you have a streaming server and the videos are following the supported video format of  DMP-4310G it will should play fine,  but you will have more overhead in managing the video as you loose the centralize option of using the Cisco Digital Sign module.
    Video codecs
    • Video MPEG1
    • Video MPEG2: Main Profile at High Level
    • Video MPEG4 Part 10 Baseline and Main profiles
    • Video Windows Media 9 and VC-1 - VoD only
    • Aspect ratio: 4:3 and 16:9
    • HD (up to 1080p at 16:9) progressive and interlace video resolution
    • Video data rate up to 28 Mbps
    • Internal Hardware Decoder delay configurable to < 1 sec
    http://www.cisco.com/en/US/partner/prod/collateral/video/ps9339/ps7220/data_sheet_c78-625677.html
    In case the video is not in the DMP supported format you might have to re-encode the video in one of the formats that are supported.
    Hope that helps
    Rubens

Maybe you are looking for

  • Generate numbers in incremental order, the number of times condition met?

    I have tried explaining my problem here also. http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=31&t=007531&p=1 But trying to put in other words now. I have a NO tag which appears many times in xml. and alwyas have some random nu

  • Enter a country for partner 0000000497 with type 'Proveedor

    Hi Masters. I am working in settup scenario SRM/EBP  to SRM/SUS.  version 7.0  problem when send XI message into Srm/sus CLIENT The transaction SXMB_MONI in trace show the next message of error Enter a country for partner 0000000497 with type 'Provee

  • Error while Releasing the budget

    Hi Gurus, We had activated AVAC at budget release (Overall & Release) with Error at 100% budget consumption. I am doing cost planning at activity level (Assigned Component, which will be effective after Activity release). When I try to release the bu

  • Toolbar icons are greyed out

    Hi there, I am a Flash newbie and am following the Adobe 'classroom in a book' course, but I am encountering a simple problem. All I want to do is to draw some shapes using the 'pen' tool. However I suddenly find that all the tools beneath the 'magni

  • All clips in project are zoomed in

    I was trying to put a title with a cross dissolve and hit something that made all the clips in my project zoom in.  There is a tiny little rectangular box with a smaller red rectangular box in the canvas.  Can anyone help me so I don't have to start