Show Concerning Condition Type in PricingProcedure while Create of Contract

Salute Masters!!
Please provide me solution for this......
There are several Tax Condition Type in Pricing Procedure; when creating contract, all the Tax Condition type is automatically coming in Condition Tab. Here, user has to delete the irrelevant Tax Condition Type and keep only that concerning Region (State) Tax Condition Type every time.
Now, is it posible to get only concerning Region (State) at Condition Tab while creation of Contract to that particular Customer?
I shall be thankful to you all for solution.
Regards,
Srivastav
+91 7829755109

You can use 2 regions in access of tax condition type:
1. Region from Delivering Plant
2. Region from Customer Master Ship-to Party.
Refer following SDN thread for your understanding/reference:
- Tax determination .
Regards
JP

Similar Messages

  • Issue in using custom discount condition type in pricing agreement at Service Contract line item level

    Hello
    We are facing an issue while using a Z discount condition type in price agreement at service contract line item level.
    A Z Condition type has been created in ECC and assigned to the pricing procedure. This pricing procedure is downloaded in CRM and determined in the service contract.
    A condition maintenance group using this Z condition type is created in CRM and assigned to service contract item category.
    Condition records are created in CRM for this condition type/condition maintenance group for specific products along with sales org and discount percentage.
    But when the price agreement(using this condition type) is used at the item level of a service contract, the system throws errors (related to product/unit of measure and sales org, even though no issues seem to be there)and thus the price agreement is not allowed to be used.
    If anyone has worked on such kind of scenario, please get in touch, I will share more details for the same. 
    Regards
    Ankit Arora

    Dear Ankit,
    Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
    In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
    Please crosscheck whether the condition table is active or not.
    Regards,
    Maddy

  • Different Exchange rate type is picked while creating PO

    Hi All,
    We are maintaining daily exchange rates under exchange rate type "M" for currency GBP to INR. We have also maintained exchange rate type "ZCIG" but we are not maintaining daily exchange rates under this exchange rate type.
    Still system is promting us to maintain the exchange rate under exchange rate type ZCIG instead of "M" while creating Purchase order. Becoz of this error i could not save the PO.
    Please guide me on this issue.
    Thanks
    Sonal

    Hello,
    Could you please let me know how you have solved this problem.
    I want a particular exchange rates for a particular vendor posting.
    Thanks,
    Srini

  • Both material groups and material types in search while creating SC

    Hi Guys,
    While creating a shopping cart ,when we are searching for materials that have been replicated in SRM we can search the material based on various parameters like Product ID ,Category ID etc.In SRM the Category ID is normally the material group.Now we want to search the material based on both,material group as well as material type.But i can have only one of these as my category.2 hierarchies R3MATCLASS and R3PRODSTYP exist in the system.But i do i make it work so that i can see both the material type as well as material group while selecting materials to shop.Is it possible??
    Thanks in advance.
    Regards,
    Pawan

    Hi,
    What do you want to see exactly in the Selection screen fro the Product search???In the Std screen,you already have the field called PRODUCT TYPE where you can enter '01'(hierarchy) and  '02'(Services).
    But if you want the field HIERARCHY in the selection screen,then you need to modify the Std search help exit(BBP_F4IF_SHLP_EXIT_PRODUCT_GEN) attached to the Std Product search help(BBPH_PRODUCT)  for  the SHOP tarscn
    You will need to create a Z search help exit(Z FM) and attach that to the Std Product search help given above.In the Z exit,you need to write the logic to display the reqd fields in the Selection screen.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Reference Guide is not available while creating new contract

    Hi All,
    I have requirement to change the description of Contract Document Name in order to show naming guidelines as description.
    I am unable to RG button at the top when I am trying to create a contract document from Contract documents tab of agreement, So I am unable to see which field is used for name.
    If I am doing changes for Contract document page customization then its displayed in contract document page but not in contract document tab of agreement.
    Please help me in changing the description in contract documents collection in Agreement.
    Regards,
    Prabhat

    Hi,
    As you pointed out correctly, RG is not visible in the scenario when you try to UPLOAD a contract document via the Contract Documents tab.
    While you can change the Flyover text of the Description field on the Contract documents UI, you will not be able to change the same for the Description field which shows up when you Upload a Contract document.
    I do see that apart from the Effective and Expiration date fields on that page, none other have any hover text at all.
    You might want to try the Toolbar Customization technique but the caveat with that will be that anywhere the Description field is referenced across the application, the flyover text on that will change.
    Hope others can chime in with their ideas as well.
    Thanks,
    Vikram Shukla

  • Error while creating RECN contract in BAPI_RE_CN_CREATE

    Dear All
    I was using the the function module BAPI_RE_CN_CREATE for creating RECN contract. When I am trying to execute the function module I am getting the error message u201CNo instance of the object type contract REFX has been created. External reference: REC<new>." in the RETURN parameter.
    please guide me to overcome this problem.
    Regards.
    S.Saravanan

    badi : recn_contract
    LSMW to add distribution details to General contrcat
    Check if the above can help you..
    Regards,
    PR.
    Edited by: Pathanjali Reddy on Feb 18, 2009 12:15 PM

  • Error while creating services contract

    dear all
    when i am trying to create service contract i am getting error message as
    Enter reason for change for version
    Message no. MEDCM003
    kindly help

    >
    sardendu kumar wrote:
    > dear all
    > when i am trying to create service contract i am getting error message as
    >
    > Enter reason for change for version
    > Message no. MEDCM003
    > kindly help
    Seems like there is version management active, and its asking for reason or number, look up a field requiring the input and fill it up.
    Edited by: Afshad Irani on May 31, 2010 5:12 PM

  • Restrict quantity while creating quantity Contract

    Hi all,
    I have created quantity  contract for 100 units and save.
    now when i was creating release order with this contract ref, it is allowing me to create for more than 100 units.
    but i want to restrict/customize that after reaching the maximum qtty frm the contract system shoud give error message , (rather than allowing me ).
    how to do this?

    Hi,
    I did this in my previous project.  we wanted to restrict the sales order upto the cotract booked with advance token to get some discount. there is no standard customization setting for that.  system gives only warning message and allows u to continue.  we have to make it error to warning.  but thing is it will not come under message attribute which allows u to make error in customization (it is not V4 message) So ask ur abaper to use exit MV45AFZZ. to make error or ask abaper to do in any way.
    regards,
    sadanandam kasarla

  • Error while creating Service Contract

    Folks,
    While I create a service contract, I am getting the error:
    "An error occurred in system PEC510 during account assignment"
    Could someone help me out with this?
    Thanks,
    Divya.

    Hi Divya,
    Please check the following in IMG:
    CRM -> Transactions -> Settings for Service Processes -> Integration -> Set up time sheet and controlling integration
    After that you should enter the corresponding R/3 System. In R/3 customizing use the following path: Settings for Service Processing -> Controlling Integration -> Establish Controlling type, controlling level and controlling scenarios.
    Here you should check if a controlling scenario for single object controlling (usually) has been maintained. See also paragraph 3.1.1.10.3 in BP guide C26 at the following location: http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C26_BB_ConfigGuide_EN_US.doc
    Kind regards,
    KZ

  • Error while creating sub-contracting challan

    Dear Sap Gurus,
                              when i was creating a sub-contracting challan in j1if01 for raw material there is an error message stating that "sub-contracting indicator not maintained for the material".. I dnt knw why it is showng the error..I think i dnt hve to maintain any indicator for raw materials while it is being sent to vendor..kindly clarify my doubt...Thank you...

    Go to J1ID and Select Maintain Material and Chapter Id Combination and Put tick mark Against Subcontractors and save.
    This is Mandatory If the Material Can Be Sent to Subcontractors.
    Regards,
    Ashok

  • Configurable Material : error while creating value contract

    First snapshot of our Configurable Material  'Material 01'
    In MM03 > Basic Data 2
    under Client specific configutarion
    Cross-Plant CM : (material 01)
    Varient (checkbox checked)
    In MM03 > MRP1
    MRP Type: PD
    In MM03 > MRP3
    Plant-specific configuration
    Configurable Material : Material 01
    Varient (checkbox checked)
    Planning Varient (checkbox checked)
    When we are raising value contract, we are getting error
    'Material 01 has status: Configure to Order'
    In Item category assignment we have assigned Zw1 (value contract doc type) on lines of 'OR doc' type  as follows
    SaTy ItCGr Usg   HLevltCA Difftc MltCa
    Zw1  0002  blank blank    TAC    TAM
    Zw1  0002  blank TAC      TAE   
    Zw1  0002  blank TAE      TAE   
    Zw1  0002  blank TAM      TAC   
    Still we are getting same error .how to resolve this.
    Thanks
    Rohit

    closing...

  • Adding Condition types to ME11

    hello gurus!
    My requirement is to add freight condition types to ME11 while creating info records. The users should enter freight conditions unconditionally w/o which the info record should not be saved. I tried validating this before save. I used Badi SD_COND_SAVE_A to validate if freight conditions are entered by the user, if not the transaction throws an error message. However the error message takes me back to the CREATE RECORD : PURCH. ORGANISATION DATA 1 screen and the net price entry gets locked and the PB00 condition type is also lost.
    I am new to ABAP and in dire need of help!!!
    Thanks in advance

    Hi,
    Create the BADI, activate it, and if you are creating it, check that in CT_KONPDB_NEW you have a line for the desired KSCHL and that CT_KONPDB_OLD is empty (without lines). I suggest you to set a break-point and check the structures in the interface. Set filters with commands CHECK to avoid that all kind of conditions run this coding.
    For instance.
      CHECK sy-tcode = 'ME11'.
      field-symbols:  <konp_old> type konpdb,
                     <konp_new> type konpdb,
                     <konh_old> type konhdb,
                     <konh_new> type konhdb,
                     <kondat_new> type vkondat,
                     <kondat_old> type vkondat,
                     <vake> type vakevb.
          read table ct_konpdb_new assigning <konp_new>
                        with   kschl = 'COND'.
          IF sy-subrc <> 0. 
            MESSAGE e398(00) WITH ...
          ENDIF.
    I hope this helps you
    Regards
    Eduardo

  • Maintain value for condition type

    Hi All
    How can i maintain fix value for any condition type so that while creating PO it will automatically picked in PO.
    e.g I want to maintain CVD as 16%
    usefull ans will be rewarded
    rajesh

    Hi,
    You maintain the condition record for CVD in FV11 for combination of Tax code etc
    Make sure you maintain "Changes to be allowed" manual entries as C auto entry
    has priority in customizing OBQ1
    The condittion value will flow auto
    BR
    Diwakar
    reward if helpful

  • VPRS condition type not to display

    Hi all
    I have condition type VPRS in my pricing procedure but my client wants it should not be display to the all user while creating sale order. Is there any way.
    Kindly replay urgently.
    Vinod

    Hi Vinod,
    Specific condition types can be hidden on pricing screens; we did the same for VPRS condition type.
    In include LV69AFZZ there is a user exit - USEREXIT_FIELD_MODIFICATION; here you need to add code as follows. 
    if <whatever conditions in which you want to hide it>
    CASE SCREEN-NAME.
    WHEN 'KOMV-KBETR'.
    IF KOMV-KSCHL = 'VPRS'.
    SCREEN-ACTIVE = 0.
    ENDIF.
    WHEN 'KOMV-KWERT'.
    IF KOMV-KSCHL = 'VPRS'.
    SCREEN-ACTIVE = 0.
    ENDIF.
    WHEN 'KOMV-KWERT_K'.
    IF KOMV-KSCHL = 'VPRS'.
    SCREEN-ACTIVE = 0.
    ENDIF.
    ENDCASE.
    ENDIF (for conditions in which the field has to be hidden)
    However we found that this happened only at item level; header still showed the condition type. Smart users can proportionately allocate the header condition amount to arrive upon the item level values. But you may investigate along these lins to determine if it is possible at header too.
    Please reward with points if useful.
    Cheers,
    KC
    SAP SD

  • Error while creating contract

    Hi Experts,
    I am getting a strange error,while creating quantity contract in VA41 .
    When ever I am trying to save the quantity contract it gives a in completion Log.
    So when I am trying to complete the documents it gives a list of incomplete fields,in those fields I see a field called Net value so when I am clicking on the field its taking me "condition" tab and under that to pricing elements .
    I have assigned pricing procedure to sales org.
    I am not able to understand how to proceed since incomplete doc would not get saved.
    Pls help .

    This is because the cost pricing for EK01 is missing. In t.code V/08, go to pricing procedure. In the pricing procedure, the pricing condition type is ticked as mandatory, hence you see the details in the imcompletion log. For details on cost using EK01, there are plenty of threads in the forum available. Just search, for example Re: Contion Type Line Items:EK01
    Regards,

Maybe you are looking for