Show event of which photo is part

If I'm looking at a photo, how can I view the entire event of which it is a part? For example, I might use Find to select an image, and then want to see all the images in the same event.

Phillip
Best I can think of is to search in the date - which you can easily get from the info window, so, assuming your pic is taken on Jan 1, then click on the magnifying glass and then click on date. Then use that to find all the pics taken Jan 1.
Regards
TD

Similar Messages

IPhoto shows events as empty but photos are inside

When I opened iPhoto today a few events I recently worked on had changed. They're shown as empty (0 photos) with a place holder graphic. It does show me when the photos were taken though and when I open the event all the photos are there.
Also, the first event in this series shows up as containing a large number of photos (350) but when I open it, it only contains the photos which should be in it.
Re-starting iPhoto doesn't help. Also opening and closing the event and re-assigning a key photo doesn't change anything.
Any help would be appreciated.

Did not work for me. Still showing:
Any other ideas?
Thank you

When I import photos they show up in the photo tab but not in events. Not sure what's going on.

Today I tried to import photos from my camera into iPhoto 11. No problems up until today. I imported the photos as usual, but they did not show up in the events section. I went to the Photo section and they appeared there. I could even name the event there, but it still wasn't visible in Events. The only way to get it to show up was to merge the events in the Photo section into an event that was appearing and then split the event. Very strange. I imported from my iPhone 5 with no problems. Photos appeared in both Events and Photos. Anyone else have this happen? Solutions? I called support and they did not have any suggestions other than to try to restart computer. That didn't solve it.

You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
most common cause of your not finding them is bad sort - view menu ==> sort events
Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
YOu can alwasy find the event a Photo is in by selecting it and selecting show event
LN

Sync issues with photos My iPhone 6 plus has 743 pictures...Itunes shows I have 2480 photos on my phone which is not true.

Sync issues with photos My iPhone 6 plus has 743 pictures...Itunes shows I have 2480 photos on my phone which is not true.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

How can I stop iPhoto from showing Events?

HI Folks,
I've used iPhoto for a long time, and I am just completely frustrated at the existence of "Events."
Every single time I take a photo and import it, I get a new event.
Even worse, I have hundreds of unnamed "Events" because that method of organizing my photos makes no sense at all.
When I import, there are generally multiple "events" documented in one import.
Now I have to spend hours breaking up Events into smaller "Events" just to have it makes sense.
Not very useful.
The worst usability offense with Events, is that iPhoto defaults to displaying the Events page when it opens.
Apple...I don't EVER want to see my photos organized by Events. EVER.
MY questions:
1. Please please tell me how I can remove the Events page completely.
2. If that is not possible, please tell me how I can tell iPhoto to default to showing me the Photos page, NOT the Events page.
3. Also, how can I view my photos on the Photos page without being broken up into events? (Without losing metadata like the date)
Thanks,
-The Craw, former Apple Technical Writer Guy

A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
Make sure show event titles is off
and you can merge or split events to make them more useful - you can not "turn them off" since they are just one of several optional views of your photos
LN

A device which is not part of this management group has attempted to access this Health Service.

Has anyone found an answer to this yet? I have uninstalled/reinstalled the agents both manually and through the push. Rebooted the client, rebooted the sce server. Forced the group policy to reapply, forced the health agent to /reportnow and I still get the error. The client shows up under the agent managed section but under the health state column it shows not monitored. The clients can ping the SCE server by FQDN and RDP to it as well so name resolution is working fine.
On the the SCE server I get this in the log
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20000
Date:  6/25/2009
Time:  10:09:40 AM
User:  N/A
Computer: *******
Description:
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name : *****
And this
Event Type:            Information
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21042
Date:                        6/25/2009
Time:                       10:25:14 AM
User:                        N/A
Computer:                ***********
Description:
Operations Manager has discarded 1 items in management group Servername_MG, which came from $$ROOT$$. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the complete topology has not been distributed yet. The discarded items will be regenerated.
On the client I get
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20070
Date:  06/25/2009
Time:  10:06:13 AM
User:  N/A
Computer: ******
Description:
The OpsMgr Connector connected to ****** but the connection was closed immediately after authentication occured. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
And this as well
Event Type:            Error
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21016
Date:                        06/25/2009
Time:                       10:06:18 AM
User:                        N/A
Computer:                ******
Description:
OpsMgr was unable to set up a communications channel to **** and there are no failover hosts. Communication will resume when ******* is both available and allows communication from this computer.
And this
OpsMgr has no configuration for management group Servername_MG and is requesting new configuration from the Configuration Service.

Hey Nathan,
Yea I have sent the script to eveyone that has aked for it. I dont know if its helped anybody else as none has given me any feedback either way.
I guess I can post it here for everyone to use.
Please keep in mind that if you use this script from MS its at your own risk, If your DB blows up, massive catastrophic failure ensues and so forth ITS YOUR OWN FAULT. MAKE SURE YOU HAVE GOOD BACKUPS
Step 1) Run this against your SCE 2007 DB
DECLARE @BaseManagedEntityInternalId int
DECLARE @BaseManagedEntityId uniqueidentifier
DECLARE @ViewName sysname
DECLARE @Statement nvarchar(max)
SET @BaseManagedEntityInternalId = 0
WHILE EXISTS (SELECT * FROM BaseManagedEntity WHERE (BaseManagedEntityInternalId >
@BaseManagedEntityInternalId))
BEGIN
SELECT TOP 1
@BaseManagedEntityInternalId = bme.BaseManagedEntityInternalId
,@BaseManagedEntityId = bme.BaseManagedEntityId
,@ViewName = met.ManagedTypeViewName
FROM BaseManagedEntity bme
JOIN ManagedType met ON (bme.BaseManagedTypeId = met.ManagedTypeId)
WHERE (bme.BaseManagedEntityInternalId > @BaseManagedEntityInternalId)
AND (bme.IsDeleted = 0)
ORDER BY BaseManagedEntityInternalId
SELECT @Statement = 'IF NOT EXISTS (SELECT * FROM ' + QUOTENAME(@ViewName) + '
WHERE BaseManagedEntityId = ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ''')
PRINT ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ' ' + @ViewName + ''''
EXECUTE(@Statement)
END
STEP 2)
If your problem was the same a mine you should get some GUID’s returned. (For example 93790c0B-09C4-3A4D-CE72-F4E3Dd917D78 MTV_DeploymentSettings)
Using the GUID that we got in the output file
Execute the below given query:
==========================
select fullname
from basemanagedentity
where basemanagedentityid = ‘<GUID>’
==========================
Verify that the device or the object mentioned in the above output is not displayed in Operations console.
Only in case if the object is not displayed then use the below given query to delete it from database.
==========================
update basemanagedentity
set isdeleted = 1
where basemanagedentityid = ‘<GUID>’
==========================
Before executing the above query please ensure that you have the backup of the database. Also note that you need to run the above said query only incase if you do not see the object in the Operations console.
After executing this query, run this stored procedure:
==========================
exec p_Detectandfixinstancespaceinconsistencies
==========================
Once it is done:
> Stop all the three OpsMgr services: health, Config and SDK on Management Server
> Cleared the health service state folder.
> Start all the three OpsMgr services: SDK, Config, and health on Management Server.
> Wait for 30 minutes and see if the agents start getting monitored.
I hope this helps everyone

A few photos not showing up in My Photo Stream in iPhoto

I recently took a few hundred pictures and uploaded them to iPhoto 9.6.1, which is set to automatically upload new photos to iCould. All of them uploaded as I can verify on an iPhone, iPad, and a MacBook, but three of them aren't showing up in My Photo Stream on the original computer. They do show up in Photos, Events, etc. Any idea why this would happen? Very strange. MacBook Pro Retina late 2013 running OS X 10.10.2. Thanks for the help! -Ben

Thanks for the reply and for your questions. The pictures are in a supported format -- JPEG. They are no different from dozens of other photos that were uploaded at the same time.
In fact, they have been successfully shared via My Photo Stream/iCould, as they are showing up on other devices. They are just not showing up in the iCloud window on the original computer.

Upgraded to OS6 on iPad and now iPhoto doesn't show "Events". What's the deal?

iPad 2 iPhoto always showed Events but since upgrading to iOS 6, "Events" are gone. What is the fix?

Puchased iPhoto app for iPad and none of my photos except for camera roll that's on iCloud came up. Tried to sync all my photos on MacBook to iPad, that didn't work. "Photos" app still has all my photos but nothing under events which brings me back to the original problem. Time to go to the Genius Bar.

Can i choose which photos to put on iCloud?

My iCloud account is full. I would like to choose which photos, etc. are exchanged between my devices. I have a son who also puts his photos (quite a few of them) on my Mac, and I don't want them to always show up on my iPhone. I can't find any info on how to pick and choose which ones go on and which ones don't.
Thank you.

Turn of automatic uploads in iPhoto by going to Preferences>Photo Stream and unchecking it. Then you can beging manually adding them to photo stream as described here: http://help.apple.com/icloud/#mmd946962 under "From iPhoto or Aperture".

I am trying to delete duplicate photos from events in i=-photo but it deletes the photos entirely from all events including the one I want to keep. How do I keep the original and delete the duplicates?

I am trying to delete duplicate photos fron my events in i-photo but it deltes the photo entirely from all events. How do I keep them in the original events and delte the duplicates without sending them all to the trash?

Are you referring to Events or Albums? A photo can exist in one Event only. However, it can be in multiple albums, books, etc., which uses pointers to the original photo in the Event. In those cases if you delete the photo from the Event all occurrences of it will be deleted from the library.
OT

As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?

As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo. I understand this was available in earlier versions. Any comments?

Against TOU which you "agreed" to in order to post in these user to user forums. If you want to "suggest" something to Apple, do so in the Product Feedback area.

How to see which photos have been added???

I have the new iMovie 10.0.1.
In the old version, when you added a photo to a movie from iphoto... it put a green check mark on the picture to know you added it.
The new version does not. Driving me a bit nutty because I can't always remember which photo I added.
I searched around and can't find an option to show this feature.
Thanks for any help.

The Published Collection doesn't really work for me either.
I guess my needs are very sepcific.
Basically what I do is adjust photos in Develop and then Export them as soon as I am done adjusting them. This way, if I export as I go, when I am done adjusting, all my files are done exporting.
If I wait until I have all the images adjusted and then "select all" and "export", then I have to wait until all the images are done exporting. If I am working on processing 1500 or more images, that can add a lot of wait time for the exporting.
I would have a similar issue with a Published Collection since I don't want to take the time to jump to Library, publish the collection and then jump back to Develop all the time.
Oh well, now I know why I don't end up switching to Lightroom. Every 6 months or so, I try Lightroom, and everytime, I quickly find a reason why I can't use it...
-Darin

HT4740 How can I avoid or solve the problem of Final Cut Pro crashes when trying to Show Events Library?

When I try to Show Events Library in Final Cut Pro, it crashes each time. Please tell me how do I work around this problem?

Try creating a new (temporary) folder and putting all your events in there - then launch FCP X.
If you can open the Browser, then it's possible one or more of the clips in one of your events is corrupt. Close the app and move the events back into their original places one by one (re-starting FCP X each time). This will help you find the event which has the corrupt file in it.
If isolating the events has no effect, I suggest you trash your preferences.
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
http://www.digitalrebellion.com/prefman/
With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
Doesn't fix every problem, but it fixes a lot.
Andy

'Which Photo Library Do you want to use' loop - HELP

I have a New (2013) MacBook Air with Version 10.9 OSX
Yesterday it crashed when i plugged in my iPhone - as usual it opened up iPhoto and attempted to sync.
Now everytime i plug in my iphone iphoto opens up a box saying
'Which photo library do you want iPhoto to use'
I only have one proto library.
It has two options
'Other Library'
'Create New'
Selecting other library and attempting to select the only iphoto library i have - it doesn't allow me to open it (it is like the 'open' button is disabled)
Obviously i don't want to create new.
If i double click 'iPhoto Library' through finder it comes up with the same box.
I have gone back and attempted to replace the iPhoto Library with a backup from a couple of days ago which worked - ie the file copied across fine - BUT still get the same issue.
It is telling me that the iPhoto Library file size is 10.7 GB so it is obviously there.
I don't know what to do next :-(

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Imported and deleted photos are always showing up as "new photos"

recently iphoto is acting strange:
photos that i have previously imported from my iphone into iphoto (and then subsequently deleted) are constantly showing up as "new photos" when i connect the iphone to iphoto.
why is it getting confused like this, and how can i fix this so i don't have to manually select the photos i want to import every time.
normally it would always recognise which photos were in fact "new" and not show old photos in the "new photos" section.
any help much appreciated.
i am using iphone 5 with latest OS, and iphoto 11 (9.2.3)

photos that i have previously imported from my iphone into iphoto (and then subsequently deleted) are constantly showing up as "new photos" when i connect the iphone to iphoto.
why is it getting confused like this, and how can i fix this so i don't have to manually select the photos i want to import every time.
iPhoto is showing you all photos on the card, that are not in your Photo Library. It does not remember, that they once had been in the library.

Show event of which photo is part

Similar Messages

Maybe you are looking for