'Show in Finder' grayed out.

Aperture 3.5.1 is running in Mavericks and using managed libraries. I notice that the option to Show in Finder is grayed out as well as Show in Project
I've rebuilt the library database but that has not solved the problem.

léonie wrote:
I'm not 100% sure but I think Show in Finder used to work. If the Show in Finder only works with referenced libraries why is there a Locate Referenced File listed as a separate option?
"Locate referenced files " will also only work for referenced files. You are right, it should be graded out for a managed Aperture library.
Iirc, "Locate Referenced Files" is ignorant.  It only knows that none of the selected Images has a referenced Original after you run the command.  That's why, afaict, the command is available even when the selection contains no Images that have referenced Originals.

Similar Messages

  • My iPod touch shows my podcasts "grayed out".  They're there, but I can't play them.  My older iPod plays them fine like normal.

    My iPod touch shows my podcasts "grayed out".  They're there, but I can't play them.  My older iPod plays them fine like normal.

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all podcasts and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • CS6 Applications all show update as grayed out

    Hello all:
    After a major system update of my 2010 Mac Pro 12-core where I have two startup drives (one with Lion and the other Yosemite), I did a complete uninstall of CS6 master collection applications on both drives. Upon doing the reinstall successfully on Lion without problem other than serial number issues (ultimately solved), when I did it on the Yosemite drive, ultimately only Acrobat (which updates alone) could update. All other applications on Yosemite have the 'update" as grayed out. Any ideas anyone?

    Hello, it sounds like you have the Desktop selected, not an open Finder Window selected, this is what shows if no Finder Window is highlighted, or if just using the Find "Window", you need a Real Finder Window open or click on icon in sidebar...

  • Slide Show "MANUAL" Sorting grayed out???

    Why is the Manual option on the SlideShow sorting drop down grayed out?
    I want to re-arrange the slides in the show manually but can't. All the other options are available and there's nothing I can find in the manual.
    Thank goodness I figured out how to display the SlideShow Editor by pressing "V" until it appeared, or I'd still be hunting that down.

    There is no manual option until images have been manually sorted. Grab a thumbnail and move it to a different position to change the order. Then Manual will be selected.
    After that if you change to sort by say Date then switch back to Manual, it will remember the manual order you created.
    DLS

  • "show chat participants" grayed out

    Once I have a chat going, "show chat participants" is grayed out, so I can't add anyone. I'm using version 4.0.3 Anyone encountered this? any solutions? (I'm NOT attempting a Bonjour chat. )
    BTW, why isn't there an iChat 4 discussion category when there is one fore version 3?

    The only way to do that is to Start a Group chat first (in iChat 4)
    I seem to remember that in Tiger you could make a chat a group chat by Dragging others to it.
    The regular posters in the various iChat discussions have had conversations with the Hosts over this issue.
    It seems, so I understand we were told, that it has to do with the older iChat forums being somewhat of an oddity as far as the Layout of all the forums are concerned as it is not hardware or a Pro App.
    Another issue appears to be how and where new Categories and the forums associated with them are added. We seem to have been told that a new forum can not be added under the current Discussion Software to an Existing category.
    We have suggested that a Category announcement like this one is added
    As this appears in iChat 2 & Earlier and iChat 3 above the Topic List as well.
    Thanks for the Points.
    9:20 PM Sunday; June 29, 2008
    Message was edited by: Ralph Johns (UK) "Limit the Logs to the Bits above Binary Images."

  • When I downloaded new photos, they showed up as grayed out areas, without any photo there, just the gray spaces shown where a photo should be.

    I downloaded a bunch of photos, but instead of them showing in each space, they were all grayed out, NO photos were shown, just blank gray spaces,where each photo should be, this has just started to happen the last month or so.

    Click this little triangle and choose Reset Tool from the popout menu:

  • CSS Properties - Show Set Greyed/Grayed Out

    I bought the book from Adobe Dreamweaver CC and am on chapter 3 about CSS. The tutorial advises at one point to click "Show Set" on. However, on my Mac 10.8.x system the check box is greyed out. Can't toggle on or off.
    Anyone know where the problem may be?
    CSS Designer>Properties
    Thanks,
    David in Texas...

    Hi David,
    The show set checkbox is enabled only if a selector is seected .
    i.e : When you inspect i.e click a particular element in the Design Surface the CSS Designer panel would display the Computed list of properties. Notice that the Show set box would be grayed out here , because the properties dispalyed are the computed ones and do not belog to a particular selector.
    When you click on any selector in the Selectors pane , the Show set checkbox will get enabled. Jsut make sure you are not seeing the computed list of properties to have the Show Set checkbox enabled.
    Let me know if this helps..

  • HT1386 Cant sync apps between itunes library and computer...apps show up but grayed out

    When trying to sync apps from itunes to ipad they appear grayed out and you can't select them. *confused

    1.  on the pad, settings, general / restrictions.  make sure that is not on.
    2. if you have multiple devices syncing from the same computer, make sure you have the correct on indicated in the leftside navigation pane of I tunes.

  • FastBuild RAID setup wont allow me to create array (grayed-out) HELP!

    880GM-E41
    amd x4 970
    2x WD Raptor 74GB
     When I go into the FastBuild RAID menu, everything is grayed out. My drives show up, but they cant be select.  These drives were formated.  I tried to format again, but the Win 7 setup wont allow me to do it again (grayed-out).
    in the "view drive assignments" menu, my two drives say "<single disk>" under "assignment".  In the manual it acts like it should say, "free".
    in the "define LD" menu the drives show up as well, but everything is grayed-out.  Under "assignment" it says, "N" and I cant change it to "Y".
    These drives used to be set up as a RAID on my old system and Im really stumped as what to do to make it work.
    Thanks,
    Cow

     PSU - APEVIA|ATX-AQ700W-BK 700W RT
    MEM - 2x2G|OCZ OCZ DDR31600
    Win 7 x64
    The two disks are the WD740GD-00FLC0 and the WD740GD-00FLA1. (both SATA I) I had them in RAID before with my 6 year old Mobo and win XP.  
    The RAID utility doesn't register it as an array in FastBuild under option 2 or 3.  It shows up before the splash screen on startup when RAID does it diagnostic check  showing my two drives saying they're healthy.  The problem is it just wont let me select them in FastBuild (it shows them, but grayed out)
    Clearing CMOS didn't help.  I may try to download and flash the BIOS??
    This is all  very frustrating as my old system had this up and running...  but thanks for the help and any future help!
    Update: I went ahead and installed windows on one the the drives so I can use the PC, but Im still wanting to put them in RAID, Id hate to reformat and everything to find out it still doesnt work...

  • Time machine disk grayed out in Disk Utility - back up not working

    The disk does not show in Time Machine. 
    In Disk Utility it shows but is grayed out.   Tried to repair disk.  Got message that disk cannot be repaired.  Tells me to back up and erase the disk.  Not sure how to back it up if it is not being recognized. Disk Verify says the volume is corrupt and needs to be repaired.  But Repair Disk doesn't work!
    I can go into Time Machine and shows me one entry -- the one from the last successful back up.
    The disk is a WD MyBook.  Map scheme GUID Partition.  Do you think the reformat will work?  Is there a way if I can tell if the disk is bad?  Tech Tools for Apple Care doesn't recognize the volume either.
    Any ideas?

    It turns out the fix for this was to just then remove the Aperture library from the exclusion list. Once I did that Time Machine did a massive 200GB backup of my entire Aperture library and everything is running fine since.
    No idea what caused the problem in the first place still.

  • HT201914 how do I get the Tool bar on my screen the show toolbar is greyed out

    How do I get the Toolbar on my screen the open toolbar in view is greyed out thanks

    Which application are you using where Show Toolbar is grayed out?

  • Security Method is grayed out

    I need to change the Security Method on a PDF file so I can reduce the file size with file optimizer.
    The problem is the drop-down menu for Security Method (File > Properties > Security) is grayed out. Also, the button for "Change Settings" and "Show Details" are grayed out as well. Below, the Document Restructions Summary shows "Allowed" for everything listed.
    In the meantime, "PDF Optimizer" remains grayed out and I need to reduced the size of a PDF.
    Any help with this would be appreciated.
    Thanks

    You might try doing a Save As with a new name. It sounds like the file has Extended Reader rights.

  • Reader toolbars grayed out

    I have Reader 9.4 in Mac with Mac OSX. Reader has only menu bar showing. View>Toolbars> shows all toolbars grayed out. What's keeping me from accessing them?

    This same problem is posted several times a day, and the answer is always the same: use the offline installers:
    Adobe Reader
    Flash Player for Internet Exporer - ActiveX
    Flash Player for Firefox - NPAPI

  • Arrrrggggggggggg Help (LOL) my DrumCore doesn't show up! Grey out (REWIRE)

    REwire is greyed out.
    Drum Core doesn't show up in library.
    Trying the old fashioned way, REWIRE is greyed out.
    Even after applying rewire to DrumCore, shutting both down and reopening (logic first) still no luck.
    Any ideas?
    Thanks!

    Also, I can't get ABSYNTH to show up unless its on a AUX bus, i.e., NO RECORDING...
    In channel, as inserts, it does not show up - - it is blank and only shows up under output channel...
    same as DrumCore, a know show and rewire grayed out - - the price was cheap and thought it was dummied down, but am beginning to be a little frustrated, (Nuendo User).
    • No DrumCore showing up
    • No DrumCore Rewire
    • Absynth shows up only in OUTPUT channel
    • DrumCore and Absynth also do not show up in LIBRARY (right side of screen).
    Thanks

  • Application not working..grays out;finder wont launch 1712 error;

    I was trying to transfer photos from my dell to my mac. i successfully transferred one file. when I copied another photo file into the same cruzer..the mac did not "see" that file (although it showed up on the dell). when i removed the cruzer from the mac..the application logo at bottom was grayed out and would not respond. Then the finder says..will not launch ..error 1712 ..THen the macbook will not shut down..only if if remove the battery. When i reinstall the battery..the startup desktop is grayed out and then looks like it is installing something at the bottom...screen is bright again, but same problem.
    how do I fix this??
    Thanks..
    Joanne

    i have not received a reply to this question. However , I went to the Genius bar today and this is how everything was fixed:
    Go to "spotlight" and type in the word activity.
    A list will show up and click on each to quit each one.
    After this was done..all worked just fine.
    Also...rather than removing the battery if the mac will not shut down..just hold down the power on button and it should power off . When the battery is removed that computer thinks it hads "died" and it will put the computer into a gray save type mode. So avoid this by holding the power button down,
    Hope this helps someone???

Maybe you are looking for