Show incoming Call thumbnail Picture on Full Scree...

I am using E61i, the small thumbnail is showing on screen when the some one call me, is it possible the thumbnail show in full screen to look good.
Solved!
Go to Solution.

Check out apps called 'Skyecaller' or 'Full screen caller'.
I don't know if FS caller will be compatible though.
http://www.skyestream.com/Skyecaller.htm
http://www.symbianware.com/product.php?id=fscaller60&pl=n6600
Message Edited by grayburn on 28-Oct-2008 10:51 AM
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Similar Messages

  • Laserjet cm1415 will not stop showing "Incoming Call"

    I have the fax setup in manual mode and it will not stop showing  "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
    Thanks

    The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
    If this message is showing up when no fax is being sent, then it means that there is noise on the phone line.  You can contact your phone company to discuss options in reducing the noise on your phone line.
    If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise.  It is possible that the internal fax parameters have become corrupt.  If that is the case, then you can perform a "Restore Defaults"  in order to reset them.  Note: doing this will erase all of your settings.  You can print out a configuration report before doing this so you can reset them.  A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
    This is based on my own experience with the product.
    I am an HP Employee.

  • My phone doesnt show incoming call and it doesnt ring. Further the iphone4 is extremely slow with opening whats app, camera and photos or while in the program it just closets. Who can advice me what to do??? Otherwise this phone will be changed soon

    My phone doest ring with incoming calls, but it also doesnt show someone is calling. I only see it, when i get the txt of missed calls.
    Further the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
    I have many people around me with iPhone having the same complaints, but nothing has changed yet.
    Please Apple solve this quickly otherwise the iPhone i enjoyed so much will be remplaceren with a Samsung

    esme43 wrote:
    ...  the phone is extremely slow with opening whats app, emails, photos, camera and it closets the programs while using it.
    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • New e75 wont show incoming call details

    hey guys, just as the title states, i have purchased a new e75 and when i recieve calls my phone only displays 'call', it does not display any incoming caller i.d such as the callers name and number. Anybody having the same problem? can anybody help me? do i need to take it back to the shop? i just bought the phone today everything else seems to be working fine. thanks.

    Thanks cjlim.
    But it was not the problem.
    I had previously removed any duplicated contact, or duplicated entry within a contact.
    But I found the cause of the problem.
    The file contact.db was corrupted.
    Here how I solve the problem.
    I erased all my contacts, made a backup (with PC Suite), then restore the phone to the factory settings (with #7370#).
    After that I restore the phone with PC Suite.
    The contacts, I picked up a one month old copy I had with outlook express.
    It solved the problem.
     Not a simple task I think.
    OVI people should issue a patch or something to save all customer out there.
    Surely it was caused by ovi.
    Thanks again.

  • Income call contact picture FULL SCREEN or small in the corner

    I have read the forum and I understand how each is set:
    FULL SCREEN: Picture must be set from iPhone itself
    Small picture in the top right: Must be set on the computer (address book/outlook)
    Ok, Now here's my question - I've set these in mixed places, some on the iphone and some in address book. Its obviously faster to do it on the computer, which is why I did it there. HOW do I get all of the pictures to show up full screen without going into each contact and reassigning the pictures? Apple has got to put in a setting somewhere - or maybe this is something that we need to request for them to put in an update.

    If you really want the big pictures, you can edit them in your iPhone contacts. Select the contact and tap the edit button at the top right. Then you can tap the picture. On the resulting screen tap "edit photo" and then tap "set photo". You will have the big photo on the next call from that contact.

  • Call Display Picture Always Full Screen (I don't want that)

    There are a few discussions about this, but they all seem to be over 4 years old, and I still have the problem.  (Please read the whole explanation, as I've tried several fixes already)
    I am extremelly picky with my computer and phone "stuff".  Ever since I've owned my iPhone I've made it a point to add a picture to every contact I have.
    Early in my iPhone ownership I realized that if you add a picture directly from your iPhone (wether is taking it directly from the iPhone cam while adding the contact or choosing from the library) such picture shows FULL screen when I call that person or when that person calls me.  If I simply open Address Book in my Mac and "drag" a picture (say for instance from Facebook) into the picture section of that contact and then synch, then when I make or receive a call from that person it shows small and I still see my wallpaper on the background.
    Well THAT's what I want (just like in the Appple commercials), I DON'T want the full screen picture.
    Now here's THE PROBLEM;
    For some reason NOW, I STILL add pictures the SAME WAY (I go into Facebook, and drag the picture into Address Book) but when I make or receive a call from that person the display picture ALWAYS shows full screen!!  It's annoying the heck out of me!!
    The ONLY thing different is that now my contact are synched thru iCloud as opposed to synching using a USB cable in iTunes, HOWEVER, SOME contacts show how they are supposed to show (even adding them thru iCloud), but MOST others don't! I feel I should add that ALL contacts I had BEFORE I strated synching with iCloud still show fine, the ones that have a problem are MOST (but not all) of the ones I added AFTER I started synching thru iCloud.  And the fact that a few worked fine leads me to believe there's got to be a way of making them all show small.
    Anyone has any idea of how to keep them ALL the same?

    OK, that's interesting.  Now, how do I get all of my contact photos into iPhoto? And do I have to do this one contact at a time, or is there a setting where I can "import all".  Furthermore, once all photos are in iPhoto and I select "Import Face from iPhoto" can I do such actions for all contacts at once or do I have to do them one at a time?

  • Not show incoming caller's name

    dear team
    If anyone in my contact list calling me, it doesn’t display their name but just number. Look like that number never save in my contact list.
    I hope what i have explained to you will be cleared for you to solve my problem.
    Looking forward to hearing from you.
    Regards,
    zubier

    Never mind. It was part of the Voice control setting.

  • Name does not show incoming calls, but only the number

    Hi, i have a BB 9300 with OS6 brand wind italia. this is my problem:
    -sometimes when my rubric contact call me i can't seeyour name, but only your telephone number. I noticed that is common when the phone is locked with password.
    I called the support, but I have not receives assistance!
    I also replaced the device, but the new one is equal.
    Please help me!!!!
    Sorry for my bad english

    It sounds as though you have content protection enabled on your address book. To disable this feature in OS6, search for "Encryption" within Options. Uncheck the "Include contacts" box.

  • Facebook not showing preview or thumbnail pictures but does show the ones on normal size? Mac mini

    I have already tried to update silverlight , flash , quicktime , etc etc , also I played around with some security settings but this has done nothing, I also tried this on chrome firefox and safari with the same exact results

    Thanks dj191
    The effects appear to be accumulating - and they might not be exactly the same, but they all end up in the same state (iTunes not responding - ball spinning - having to force quit) - on my side I can definitely reproduce the "iTunes not responding" also if nothing is or has been streaming.   For the time being once I force quit I select "report to apple" - maybe somebody at apple is reading those ...
    Your case indicates that something in iTunes is still alive at the time of the freeze - your current movie streams out normally, the Apple TV sees your homesharing mac mini as active and does not stop the movie.  I am assuming when trying to access the next movie the Apple TV timeouts and report an error accessing your library (correct? - this is what I get once I try to access the library with iTunes frozen). Do I read correctly that you cannot start the next one after a Force-Quit of iTunes?
    Means to me that the size of the library, use of a mac mini, use of Apple TVs and the upgrade to iTunes11.1 are the correlating parameters between our systems - dj191 did not reflect on "access to the iTunes store" as a cause of a problem and I am for now assuming that my double NAT configuration is potentially not a common parameter. 

  • Contact picture does not appear when receiving incoming call

    I have attached pictures on my iPhone contacts but when i receive an incoming call the picture does not appear. Any ideas how to resolve.

    I am expriencing the same issue with my iPhone 4S, were you able to resolve the problem?

  • When i recieve a incoming call on my iphone 4s the size of the contact picture is full screen how do i get the picture to display thumbnail size

    when recieving a incoming call the full size contact pic assigned to the contact displays how can i cahnge it to thubnail size while displaying the wallpaper at the same time?please help!!!

    Dear arob615,
    Reduce the resolution.
    The picture will display as thumbnail on the phone when a call comes in.
    Since Mountain Lion I had full screen caller pictures even when assigned in the OS X adress book.
    In my case I reduced the picture to 64 x 64 pixels.
    Then it showed as thumbnail as calls came in.
    I don't know where the exact maximum pixel size for thumbnail display is.
    If you find out, tell us.
    This bugged me a long time and I would enjoy if this could help you.
    Best regards
    idontknowwhoiamsowhat

  • Bring back full screen pictures for incoming calls

    Bring back full screen pictures for incoming calls in the new update !!!!

    Feedback to Apple does not go here, it goes here: www.apple.com/feedback and click on the appropriate link.
    This is a user to user forum.

  • Full screen incoming caller picture

    Hi,
    I am much disappointed with the change from full screen contact picure on the call screen to a small teeny circle when I get an incoming call. I wish they will have to bring back the same (full scren contact picture while calling) feature in their next revision as an optional one at-least!
    Thanks
    Sri

    You can leave your Feedback with Apple in the following link, Maybe if Apple gets a Request from huge amount of users demanding for Fullscreen Caller ID then they May do something in the coming Update.
    http://www.apple.com/feedback/
    There are many other users who is dissatisfied with the new Caller ID Picture in a small circle with the New iOS 7.1 Update : https://discussions.apple.com/thread/5981752?start=0&tstart=0

  • When I updated my iPhone 4s the picture of the person calling me is no longer displayed full screen.  I do not like the small thumbnail picture.  What can I do about this?

    When I updated my iphone 4s the picture of the person calling me is no longer displayed full screen and the thumbnail picture is too small.  Is there anything I can do to change this?

    Yes, hopefully.. Go to www.apple.com/ feedback  and let them know how upset you are!!  I did along with many others.  It's the only way to let Apple know they made a HUGE mistake here..

  • Why did Apple change the incoming caller photo Id to a small picture in a small circle instead of the large full screen picture when calls are received?  This is useless.  If it isnt cchanged back to the way it was I am done with the iphone.  Hello Galaxy

    This will be my last iphone if thhis minor software issue is not cleared up.  I hate the new caller ID incoming picture.  Too small

    We are all users like yourself. No one here is an employee or representative of Apple. We cannot know why the photo of the incoming caller was changed. We can only say that it is what it is. If that feature change is enough to make you want to change phones then get the phone that best suits your needs. In the meantime you can send feedback to Apple here:
    http://www.apple.com/feedback/iphone.html

Maybe you are looking for

  • Query refresh

    Hi, i get the following error when i refresh a workbook which has 6 queries. Cannot find the results area for a query, probably all its cells were deleted. please define a new location for the results area. and then when i click ok in the window. new

  • Alv output to Excel with numeric fields as numeric fields only and not char

    Hi, When we download the alv output to excel format in the locat file using the toolbar button provided in the ALV, the numeric fields get converted to character format. Is there any other way or settings in ALV so that the numeric fields will be get

  • Using text in AGO function

    Hi guys, I have a factless fact (indicator and some textual field) that I need to display for previous year. I need somehow to use it in AGO function - I'm getting error message that AGO can only accept aggregated measure. Any ideas?

  • Can't drag images into "album" on iWeb gallery

    I use iWeb 08 I am able to drag individual images to the page but I cannot seem to drag albums, multiple images to the "drag albums here" section. I drag them and there is a green "plus" sign but the page/ "drag albums here" space doesn't accept the

  • AppleTV or Mac Mini with Front Row?

    I'm trying to decide whether to get an Apple TV, or a Mac Mini running Front Row. Cost is not the main issue. I live in The Netherlands where Apple has no movie rental service. I have a large DVD collection that I am slowly ripping to an external har