Show key content of essbase cube in BIEE

After importing Essbase cube into BI admin tool, I can query its content in BI Answer.
But when I display the dimensional content(says, Gen5,Loc1), it displays Alias content rather than the key content. What should I do in BI admin tool to show the key content? or are any settings required in Essbase?

That's expected behaviour. As soon as there's an Alias, it gets used. Otherwise, it defaults back to the acutal member name.
Yes, you can change this, but only for the lowest level of the hierarchy. We discussed this already some times togehter with the alternatives.
Here's the official modelling guide BTW: http://www.oracle.com/technology/products/bi/pdf/obiee-essbase-modeling-guide.pdf --> 7.3 on page 19.

Similar Messages

  • Combining relation facts with dimensions from an Essbase cube

    Hi!
    I am having trouble combining relational measures (from EBS) with dimensions from an Essbase cube. The dimensions that we want to use for reporting (drilling etc) are in an Essbase cube and the facts are in EBS.
    I have managed to import both the EBS tables and the cube into OBIEE (11.1.15) and I have created a business model on the cube. For the cube I converted the accounts dimension to a value based dimension, other than that it was basically just drag and drop.
    In this business model I created a new logical table with an LTS consisting of three tables from the relational database.
    The relational data has an account key that conforms to the member key of the accounts dimension in the Essbase cube. So in the accounts dimension (in the BMM layer) I mapped the relational column to correct column (that is already mapped to the cube) - this column now has two sources; the relational table and the cube. This account key is also available in the LTS of my fact table.
    The content levels for the LTS in the fact table have all been set to detail level for the accounts dimension.
    So far I am able to report on the data from the fact table (only relational data) and I can combine this report with account key from the account dimension (because this column is mapped to the relational source as well as the cube). But if expand the report with a column (from the accounts dimension) that is mapped only to the cube (the alias column that contains the description of the accounts key), I get an error (NQSError 14025 - see below).
    Seeing as how I have modeled that the facts are connected to the dimension through the common accounts key, I cannot understand why OBIEE doesn't seem to understand which other columns - from the same dimension - to fetch.
    If this had been in a relational database I could have done this very easily with SQL; something along the lines of select * from relational_fact, dim_accounts where relational_fact.account_key=dim_accounts.account_key.
    Error message:
    [nQSError: 14025] No fact table exists at the requested level of detail
    Edit:
    Regards
    Mogens
    Edited by: user13050224 on Jun 19, 2012 6:40 AM

    Avneet gave you the beginnings of one way, but left out that a couple of things. First, you would want to do the export of level zero only. Second, the export needs to be in column format and third, you need to make sure the load rule you use is set to be additive otherwise the last row will overwrite the previouse values.
    A couple of other wats I can think of doing this
    Create a replicated partition that maps the 3 non used dimensiosn to null (Pick the member at the top of the dimension in your mapping area)
    Create a report script to extract the data putting the three dimensions in the page so they don't show up.
    Use the custom defined function jexport in a calc script to get what you want

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Essbase Studio: Failed to deploy Essbase cube

    Hi
    I have started working with Essbase studio sometime back and I am able to deploy BSO cube with success using the TBCSample Database which comes along with Essbase. Now I wanted to deploy ASO cube, as no sample database is available I thought to create one, I extracted ASOSamp using ODI to CSV files. Then I bulk inserted the csv extracts into MSSQL 2003 server which created 11 tables (Age, Geography, IncomeLevel, Measures, PaymentType, Product, Stores, Time TransactionType, Year). The above mentioned table does not have any keys(Primary, Foreign) as it is an Essbase export.
    I then successful created ASO Cube Schema using the newly created sample database in MSSQL, validated cube schema without any errors.
    Essbase Property Setting:
    Measures Hierarchy is tagged as Dynamic Compression at dimension level
    Time, Product and Year Hierarchy is tagged as Multiple Hierarchies Enabled, Year does not have multiple hierarchies but it has formulas for Variance and Variance % member. Is there a way to tag Year as Dynamic hierarchy?
    But when I try to deploy the cube to Essbase I receive following errors:
    Failed to deploy Essbase cube
    Caused By: Cannot end incremental build. Essbase Error(1060053): Outline has errors
    \\Record #1 - Member name (Time) already used
    + S Time + S
    \\Record #6 - Member name (1st Half) already used
    MTD + S 1st Half + S
    \\Record #7 - Member name (2nd Half) already used
    MTD + S 2nd Half + S
    \\Record #21 - Member name (Qtr1) already used
    Qtr1 + S Feb + S
    \\Record #22 - Member name (Qtr1) already used
    Qtr1 + S Jan + S
    \\Record #23 - Member name (Qtr1) already used
    Qtr1 + S Mar + S
    \\Record #24 - Member name (Qtr2) already used
    Qtr2 + S Apr + S
    \\Record #25 - Member name (Qtr2) already used
    Qtr2 + S Jun + S
    \\Record #26 - Member name (Qtr2) already used
    Qtr2 + S May + S
    \\Record #27 - Member name (Qtr3) already used
    Qtr3 + S Aug + S
    \\Record #28 - Member name (Qtr3) already used
    Qtr3 + S Jul + S
    \\Record #29 - Member name (Qtr3) already used
    Qtr3 + S Sep + S
    \\Record #30 - Member name (Qtr4) already used
    Qtr4 + S Dec + S
    \\Record #31 - Member name (Qtr4) already used
    Qtr4 + S Nov + S
    \\Record #32 - Member name (Qtr4) already used
    Qtr4 + S Oct + S
    \\Record #33 - Member name (Time) already used
    Time + S MTD + S
    \\Record #34 - Member name (Time) already used
    Time ~ S QTD ~ S
    \\Record #35 - Member name (Time) already used
    Time ~ S YTD ~ S
    \\Record #9 - Error adding Attribute to member QTD(Jan) (3320)
    \\Record #9 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD + S QTD(Jan) + S [Jan]
    \\Record #10 - Error adding Attribute to member QTD(Apr) (3320)
    \\Record #10 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Apr) ~ S [Apr]
    \\Record #11 - Error adding Attribute to member QTD(Aug) (3320)
    \\Record #11 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Aug) ~ S [Jul]+[Aug]
    \\Record #12 - Error adding Attribute to member QTD(Dec) (3320)
    \\Record #12 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Dec) ~ S [Oct]+[Nov]+[Dec]
    \\Record #13 - Error adding Attribute to member QTD(Feb) (3320)
    \\Record #13 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Feb) ~ S [Jan]+[Feb]
    \\Record #14 - Error adding Attribute to member QTD(Jul) (3320)
    \\Record #14 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Jul) ~ S [Jul]
    \\Record #15 - Error adding Attribute to member QTD(Jun) (3320)
    \\Record #15 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Jun) ~ S [Apr]+[May]+[Jun]
    \\Record #16 - Error adding Attribute to member QTD(Mar) (3320)
    \\Record #16 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Mar) ~ S [Jan]+[Feb]+[Mar]
    \\Record #17 - Error adding Attribute to member QTD(May) (3320)
    \\Record #17 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(May) ~ S [Apr]+[May]
    \\Record #18 - Error adding Attribute to member QTD(Nov) (3320)
    \\Record #18 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Nov) ~ S [Oct]+[Nov]
    \\Record #19 - Error adding Attribute to member QTD(Oct) (3320)
    \\Record #19 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Oct) ~ S [Oct]
    \\Record #20 - Error adding Attribute to member QTD(Sep) (3320)
    \\Record #20 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    QTD ~ S QTD(Sep) ~ S [Jul]+[Aug]+[Sep]
    \\Record #36 - Error adding Attribute to member YTD(Jan) (3320)
    \\Record #36 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD + S YTD(Jan) + S [Jan]
    \\Record #37 - Error adding Attribute to member YTD(Apr) (3320)
    \\Record #37 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Apr) ~ S [Qtr1]+[Apr]
    \\Record #38 - Error adding Attribute to member YTD(Aug) (3320)
    \\Record #38 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Aug) ~ S [1st Half]+[Jul]+[Aug]
    \\Record #39 - Error adding Attribute to member YTD(Dec) (3320)
    \\Record #39 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Dec) ~ S [1st Half]+[Qtr3]+[Qtr4]
    \\Record #40 - Error adding Attribute to member YTD(Feb) (3320)
    \\Record #40 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Feb) ~ S [Jan]+[Feb]
    \\Record #41 - Error adding Attribute to member YTD(Jul) (3320)
    \\Record #41 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Jul) ~ S [1st Half]+[Jul]
    \\Record #42 - Error adding Attribute to member YTD(Jun) (3320)
    \\Record #42 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Jun) ~ S [1st Half]
    \\Record #43 - Error adding Attribute to member YTD(Mar) (3320)
    \\Record #43 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Mar) ~ S [Qtr1]
    \\Record #44 - Error adding Attribute to member YTD(May) (3320)
    \\Record #44 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(May) ~ S [Qtr1]+[Apr]+[May]
    \\Record #45 - Error adding Attribute to member YTD(Nov) (3320)
    \\Record #45 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Nov) ~ S [1st Half]+[Qtr3]+[Oct]+[Nov]
    \\Record #46 - Error adding Attribute to member YTD(Oct) (3320)
    \\Record #46 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Oct) ~ S [1st Half]+[Qtr3]+[Oct]
    \\Record #47 - Error adding Attribute to member YTD(Sep) (3320)
    \\Record #47 - Aggregate storage outlines only allow formulas in compression dimension or dynamic hierarchies.
    YTD ~ S YTD(Sep) ~ S [1st Half]+[Qtr3]
    \\Record #2 - Incorrect Dimension [Year] For Member [ParentName] (3308)
    ParentName Consolidation DataStorage MemberName Consolidation DataStorage Formula
    \\Record #1 - Member name (Promotions) already used
    S Promotions S
    \\Record #2 - Incorrect Dimension [Promotions] For Member [ParentName] (3308)
    ParentName DataStorage MemberName DataStorage
    \\Record #3 - Member name (Promotions) already used
    Promotions S Coupon S
    \\Record #4 - Member name (Promotions) already used
    Promotions S Newspaper Ad S
    \\Record #5 - Member name (Promotions) already used
    Promotions S No Promotion S
    \\Record #6 - Member name (Promotions) already used
    Promotions S Temporary Price Reduction S
    \\Record #7 - Member name (Promotions) already used
    Promotions S Year End Sale S
    \\Record #2 - Incorrect Dimension [Payment Type] For Member [ParentName] (3308)
    ParentName DataStorage MemberName DataStorage
    \\Record #2 - Incorrect Dimension [Transation Type] For Member [ParentName] (3308)
    ParentName DataStorage MemberName DataStorage
    \\Record #22 - Member name (Home Entertainment) already used
    Home Entertainment + S Home Audio/Video + S
    \\Record #23 - Member name (Home Entertainment) already used
    Home Entertainment + S Televisions + S
    \\Record #24 - Member name (Other) already used
    Other + S Computers and Peripherals + S
    \\Record #25 - Incorrect Dimension [Product] For Member [ParentName] (3308)
    ParentName Consolidation DataStorage MemberName Consolidation DataStorage
    \\Record #26 - Member name (Personal Electronics) already used
    Personal Electronics + S Digital Cameras/Camcorders + S
    \\Record #27 - Member name (Personal Electronics) already used
    Personal Electronics + S Handhelds/PDAs + S
    \\Record #28 - Member name (Personal Electronics) already used
    Personal Electronics + S Portable Audio + S
    \\Record #31 - Member name (All Merchandise) already used
    Products + S All Merchandise + S
    \\Record #32 - Member name (High End Merchandise) already used
    Products ~ S High End Merchandise ~ S
    \\Record #33 - Member name (Systems) already used
    Systems + S Desktops + S
    \\Record #34 - Member name (Systems) already used
    Systems + S Notebooks + S
    \\Record #18 - Error adding Attribute to member Digital Recorders (3320)
    Home Audio/Video + S Digital Recorders + S
    \\Record #36 - Error adding Attribute to member Flat Panel (3320)
    Televisions + S Flat Panel + S
    \\Record #37 - Error adding Attribute to member HDTV (3320)
    Televisions + S HDTV + S
    \\Record #8 - Incorrect Dimension [Income Level] For Member [ParentName] (3308)
    ParentName DataStorage MemberName DataStorage
    \\Record #1 - Member name (Geography) already used
    S Geography S
    \\Record #2 - Error adding member 27425 (3317)
    \\Record #2 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    A M F GREENSBORO - NC S 27425 S 336
    \\Record #3 - Error adding member 36310 (3317)
    \\Record #3 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABBEVILLE - AL S 36310 S 334
    \\Record #4 - Error adding member 29620 (3317)
    \\Record #4 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABBEVILLE - SC S 29620 S 864
    \\Record #5 - Error adding member 67510 (3317)
    \\Record #5 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABBYVILLE - KS S 67510 S 316
    \\Record #6 - Error adding member 58001 (3317)
    \\Record #6 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABERCROMBIE - ND S 58001 S 701
    \\Record #7 - Error adding member 42201 (3317)
    \\Record #7 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABERDEEN - KY S 42201 S 502
    \\Record #8 - Error adding member 21001 (3317)
    \\Record #8 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABERDEEN - MD S 21001 S 410
    \\Record #9 - Error adding member 39730 (3317)
    \\Record #9 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABERDEEN - MS S 39730 S 601
    \\Record #10 - Error adding member 28315 (3317)
    \\Record #10 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABERDEEN - NC S 28315 S 910
    \\Record #11 - Error adding member 79311 (3317)
    \\Record #11 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABERNATHY - TX S 79311 S 806
    \\Record #12 - Error adding member 79601 (3317)
    \\Record #12 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABILENE - TX S 79601 S 915
    \\Record #13 - Error adding member 79608 (3317)
    \\Record #13 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    ABILENE - TX S 79608 S 915
    \\Record #14 - Error adding member 79698 (3317)
    \\Record #14 - Aggregate storage outlines only allow any shared member once in a stored hierarchy, including prototype.
    Are these errors due to data source, if yes what could be possible work around?
    Is there any problem with Essbase properties which I have set if so then when I validate cube schema why I dn't get any errors?
    Please help me, I am stuck here not able to deploy ASO Cube.
    Thanks in advance

    Hii
    I have the same problem , you have.
    did you manage to solve it ??
    Thanks in advance

  • Issue in integrating Essbase cubes with OBIEE

    Hi
    I am trying to use Essbase cubes as datasource in OBIEE for generating reports,but the issue is in generating , No columns in fact table of cube in BMM layer.
    Outline of cube is
    Revel(cube)
    (Hierachies)
    Time Time <5> (Label Only)
    Item <54> (Label Only) (Two Pass)
    DepInst <20> (Label Only)
    SFA_Flag <2>
    Deduction_Flag <2>
    Rating_Category <6>
    PD_Band <9>
    Product <17>
    Entity <4>
    CR_Agency <5>
    I am confused how to generate reports without measures in fact table.
    Regards
    Sandeep

    Hi Sandeep,
    in that case it's as I thought:
    Or did you just not specify any measure hierarchy?You tried this...
    In BMM layer i made this dimension as fact and tried to create reports but not use....which isn't the way. First of all your cube seems to be built quite bizarre since it doesn't even provide a default measure hierarchy so I'd have your Essbase guys check that.
    As for the OBIEE side: the key is the physical layer. BMM's already too late. In the physical cube object, you must define one of the hierarchies as the measure hierarchy (since your cube doesn't seem to provide it; see above):
    [http://hekatonkheires.blogspot.com/2010/02/obieeessbase-how-to-handle-missing.html]
    Cheers,
    C.

  • Why do we see only values of key figures of a cube in SE11?

    Hi all,
    When we view the contents of a cube in SE11 why can’t we view the characteristics also? Why are only the values of key figures visible to us? Is there any way wherein we can also view the whole contents of the cube i.e. both the characteristics and the key figures?
    Please explain.
    Thank you.
    TR.

    SE11 gives you the Table View.
    A Infocube is a complex strructure where data is stored in mutiple Tables...
    KEy Figure Values in Central Fact Table...Characteristic SIDs in the DIM Table and these SIDs linked to the Master data table values.
    So, to be able to read the values , you would need to know how data is organised in an Infocube
    Regards.

  • Shared Services access to Essbase cubes

    I'm having several problems with user access to Essbase (non-Planning) cubes. The first problem is that I have granted Read access to the users (using a group) to these Essbase cubes in Shared Services. The security has been refreshed, and if you view the properties of any of the databases to which I've granted access, it shows that the group has read access. However, the users do not see these applications in Smart View Data Source Manager. Does anyone know why they are not showing up in Smart View? Using my own id, I added all of these applications to the pre-defined view, and if the users use the pre-defined view, they can see the databases, but if they try to connect it says they don't have access.
    The second issue is that only the Essbase cubes that existed at the time that we upgraded to version 11 are showing up in Shared Services. We have since created several more cubes, but I am unable to get them to show up in Shared Services. What am I missing? Shared Services Help is not particularly helpful in either of these instances.
    Thanks,
    Sabrina
    P.S. Just venting, but I hate Shared Services.

    John,
    I have two problems with your suggestion. The first is that when I go to the "Assign Access Control" page, I can't select users/groups, but can only select users. I could do each user separately, I suppose, but doesn't that sort of defeat the purpose of having groups? I'm on version 11 - do you know of any reason why I can't choose groups at this point?
    My second problem is that I can't set them as essbase/planning users, if by that you mean there should be a choice that is both. I can do either one, but not both together. They are currently set to Planning. Will it mess anything up with their Planning access if I set them to Essbase?
    Thanks,
    Sabrina

  • Apple mail search finds the message but cannot show its content, why?

    Hi
    I have a MacBook Pro with Mountain Lion installed on it. All the updates are also installed.
    The problem is that I can quickly find a message among 100,000 messages sorted in different folders in Apple Mail, but as I click on the message, it keeps showing "loading..." and never shows the content of that message.
    When I manually go to that message, Mail shows the content properly. So it happens only when I try to see the content of the message that has been found through search function.
    Any ideas?
    thanks,
    Farshid

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "mdworker" (without the quotes) in the Filter text field. Select the most recent 50 or so messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are long runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.
    Step 2
    Do the same with the search string "mds".

  • Portlet repository-- Seeded providers does not show Portal Content area

    Hi,
    When I login to portal as admin user go to administration --> Display portlet repository--> Seeded providers does not show Portal Content area.I tried to search but no results shown.
    Any idea as to how to get it back ?
    Thanks and regards.
    Neeti.

    1. From the Portal Object Navigator, click on the Applications
    tab.
    2. In the "Find" box, type %search% and click "Go"
    3. There are 2 reports you need to modify, depending on which
    portlet provider you want to use: RPT_SEARCH (owned by
    people_app) and SEARCH_RESULT (owned by wwv_system)
    4. For each report, click the "Edit" link
    5. Click the "Display Options" tab
    6. Under the "Full Page Options" heading, change the "Size"
    for "Row Text" to 12. (If you are running the reports as
    portlets, then you must also change the "Size" for "Row Text"
    under "Portlet Options".)
    7. Click OK
    Search results are now visble using either portlet, the Oracle
    Portal provider or the PEOPLE_APP provider.
    You may also need to change the field settings on the hierarchy
    if now when you run the people search you receive SQL errors.
    Here is what worked for me (assuming you want to change both
    users components):
    1. On the Application Tab search for %search% and %detail%
    components. You don't need to change the WWMON components.
    Change the font size on the full page and portlet options
    (Display Options Tab)for the heading and text (I use 12 and
    11pt). Otherwise the default can only be read with a magnifying
    glass.
    2. The org chart components are slightly different. Search for %
    org% and you will find 2 components org_chart and orgchart. Both
    of these need to have the column fields changed (Table or View
    Column tab) as well as the font size for the Parent, Child,
    Grandchild (Display Options Tab). Here are the Table Column
    settings (for some reason they are initially blank - yet will
    fail if recompiled without values):
    People_App.Org_chart
    1. key values:
    primary key - empno
    parent key - manager
    start with - empno
    ww_system.orgchart
    1. Primary Key Column WWSEC_PUBLIC_DIRECTORY.ID
    Parent Key Column WWSEC_PUBLIC_DIRECTORY.MANAGER
    Start With Column WWSEC_PUBLIC_DIRECTORY.ID
    Hope this helps. The second half of the answer provided by Rich
    Pickett.

  • Photos Missing from Original's Show Package Content

    Because I still have some photos with the ! over them when clicked, I decided to make a new library with the originals from the iPhoto Show Package Contents.
    I moved the existing library folder to the desktop and opened the library package with a control-click, clicked on "Originals". However, when I looked at the contents of "Originals" that the menu listed, the more recent additions to the library where not displayed in the menu.
    I placed the library back in "Finder/Pictures" and opened iPhoto again. Sure enough, the most recent photos that I had added to the library appeared in iPhoto.
    How can I get those most recently added photos to display in the originals so that I can create a new library?
    Oh yes, I did not make any changes at any time!
    Thanks for your help.
    Vernon

    If you want to create a new library with all of the photos in your current library download and use iPhoto Library Manager to rebuild the library. This method will keep the metadata intact. Here's how:
    Using iPhoto Library Manager to Rebuild Your iPhoto Library
    1 -Download iPhoto Library Manager and launch.
    2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    4 - In the next window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory.
    Control click on one of the photos that you can't fine in the Originals folder and select "Show File" in the contextual menu. You will be taken to the folder that contains the photo. If the photo is displayed you can check to see where it's located.
    If you experience the "!" again there are two methods to recover:
    Try the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
    Fix #2
    Rebuild the library using iPhoto Library Manager as follows:
    Using iPhoto Library Manager to Rebuild Your iPhoto Library
    1 -Download iPhoto Library Manager and launch.
    2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    4 - In the next window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory.

  • EAL replicated Essbase cube empty

    Hi,
    I am trying to build a replicated Essbase cube using EAL from HFM, all 11.1.2.2. The EAL bridge shows green across the board, so all good. When I build a transparent cube, I can see the data in Essbase, nio problems. Now I am trying to build a replicated cube, using the same region and Essbase grid definition as for the transparent. The outline gets built fine, and when I go to retrieve, it does the retrieve, shows the status bar, and eventually comes back with Successful.
    However when I look at the replicated cube there is no data in it, no blocks were created, nothing. When I look in the EAL log, there are no errors, the last entry refers to Extract Region with a list of the dimensions, nothing more. I tried using both Embedded and a specific APS URL in the Essbase cube link in EAL. Like I said the transparent cube is fine, so I believe the region and grid definitions are valid, so I cannot understand why the data is not in the replicated cube.
    Anyone has experienced anything similar and might have some hints?

    Could the level 0 data have been zeroed out, and no agg run to propagate the zeros (or #Missing) to upper levels?
    Did you at one time have some data in the database, then lock n send to overwrite?
    If you had performed a database reset, that would leave no page file. If you simply overwrote data, then you could have some fragmentation (when data is overwritten, the data is written to a new space in the page file with the index pointing to new data. This leaves the prior data behind with no index pointer to it, but it's still in the page file.)
    Was the export file of all data, or level zero data?
    If it was level 0 export, perform an export all (3mb is not that much) to verify if there is any data. If not, I'd chalk it up to fragmentation.
    Robert

  • Links to show the content

    Hello, i'm new new bie in KM, sorry.
    I have my first own search component(jspdynpage)
    and i would like to put links to show the content of some listed display names of resources in another window.
    how can i manage with links to resources?
    Thanks¡¡

    Hi Jon,
    Resources within KM are called via the com.sap.km.docs component. That is for example: a link to /documents/YourDoc.txt would target to: http://[yourserver]:[yourport]/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/YourDoc.txt
    Hope it helps
    Detlev

  • Imported essbase cube into Oracle BI

    Hi all,
    Environment : Oracle BI EE and Oracle Hyperion Essbase 11.1.3
    I have created Oracle BIEE dashboards using ESSBASE cube as source
    I am following the below steps :
    Step 1 : from Administrative Tool i imported essbase cube into the physical layer
    Step 2 : i drag the cube in to the Business Model layer and Presentation Layer
    Step 3 : while creating Oracle BI dashboards in Answers(Presentation Service), Metadata is perfectly Comming but the Measure values should always be empty.
    I followed the link for creating and configuring the the Oracle BIEE Dashboards with Oralce Hyperion Essbase 11.1.3
    1. http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/essbase/biee_essbase.htm
    2. http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html
    i am facing the problem to get the Amount Values, So i need help to Achive this issue.
    Thanks and regards,
    Mano

    Have you set the dimension in your Essbase cube that stores the data facts (Amount Values) as an "Accounts" dimension? If not, do that. You'll need to re-import the whole thing in the BI Administration tool again and then drag it across to the BMM and Presentation layers.

  • Drill into data in an essbase cube.

    Hey all, I have a problem I need some help/advice with.
    I have an Essbase cube which has a date style hierachy of year, year & quarter, year and month, year month and day.
    I have a chart showing the current values, monthly, over the last 12 months. When you select one of the monthsit drills into the data to show the daily values for the month selected. All works OK.
    The only problem I have, and it os only cosmetic, is that the time access along the bottom changes to show values for every level in the hierachy, and I only want it to show the next level down.
    Example - desired:
    2010/08 -> 01/08/2010.........02/08/2010..... etc.....
    Example - current:
    2010/08 -> 2010, 2010/Q3, 2010/08, 01/08/2010.........2010, 2010/Q3, 2010/08, 02/08/2010........etc....
    The only solution I have at present is to change the interaction to naviagte rather than drill and the navigated report is the correct format.
    Can anyone else suggest anything?
    Thanks in advance

    11.1.1 DBAG:
    Methods for Clearing Data from Specific Regions of Aggregate Storage Databases:
    Within an aggregate storage database, you can clear data from a specific region and retain the data located in other regions. This feature is useful when you want to delete volatile data (such as data corresponding to the last month) but retain historical data. You must have Database Manager or Administrator permission to clear data.
    Methods for clearing data from a region:
    (1) Physical, in which the input cells in the region are physically removed from the database
    (2) Logical, in which the input cells in the region are written to a new data slice and negative, compensating values are used, thus resulting in a value of zero for the cells that are cleared
    To clear data from a specified region, you can use the alter database MaxL statement with the clear data in region grammar. The syntax for the statement is as follows:
    *alter database appname.dbname clear data in region {MDX set expression} [physical];*
    todd rebner
    http://www.advancedepm.com/

  • Why doesn't Apple mail show the content of messages in my Exchange email account?

    When I open Mail and click on my exchange account the messages all show no content.  I have tried deleting and adding the account, but the same thing happens--no content in the messages.

    Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Then when restarted, highlight that inbox & choose Rebuild from the Mailbox menu item.

Maybe you are looking for

  • Header and Footer in Block ALV Display

    Hi All, My requirement includes to ALV Block List Display with header and footer. I have made two forms TOP_OF_PAGE and END_OF_PAGE . I have pass the form and name of event to an internal table it_events. This it_events[] is then passed to FM ' REUSE

  • OWB Repository connection time out

    Hi, please suggest some solution for the following issue. Whenever i'm  inactive on OWB repository for more than 30 mins, i get Repository connection error as the connection to the repository was lost, because of the following database error: Closed

  • Random display switching and weird behaviour. [Solved]

    Hey guys and girls Have had Arch running smoothly for a few months now and have avoided posting for minor issues, because your forums are so ace and have been able to find everything I need. Have to say out of all the distros that I've tried Arch sim

  • Need software for airport extreme for 10.2.8

    Hi, I just bought a airport extreme card, but it says I cannot install the software b/c I need yo have Mac OS X 10.3.3. I have 10.2.8 on my system. Anyone know where I can download this? I've searched with no success...thanks!

  • Set AE as an IP passthrough?

    Hi We got my son an Airport Express for his dorm room where they have restrictions on internet connections and don't generally allow WiFi in the rooms. It appears that they use a pseudo-static DHCP scheme - always assigns a 172.xx.xx.xx type IP addre