Show master data attribute time dependent for pervious period

hi
I would to know how get in report values of pervious period of attribute which is time dependent
(like person)

Hi,
refer below threads might be helpful
[http://help.sap.com/saphelp_nw04/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/content.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/80/1a634be07211d2acb80000e829fbfe/content.htm]
Thanks

Similar Messages

Showing master data value in report for which no record in Infoprovider

Hi,
We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
Please suggest.
Thanks & Regards
Madhu
00919830957798

Madhu,
There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
https://service.sap.com/~sapidb/011000358700008387152002
This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
Cheers
Aneesh

InfoProvider: infoObject (master data attribute and text)

I saw info Object of master data attribute and text in InfoProvider.
are infoObject act like a table when we do query on them.

Hi
Refer to this as down
Custome Infoobjects Tabels:
/BIC/M -- View of Master data Tables
/BIC/P -- Master data Table, Time Independent attributes
/BIC/Q -- Master data Table, Time Dependent attributes
/BIC/X -- SID Table, Time Independent
/BIC/Y -- SID Tabel, Time Dependent
/BIC/T -- Text Table
/BIC/H -- Heirarchy Table
/BIC/K -- Heirarchy SID Table
Standard Infoobjects Tabels(Buss. Content):
Replace "C" with "0" in above tables.
Ex: /BI0/M -- View of Master data Tables

Master Data Attributes issue in BEx

Hi Everyone,
I have loaded Master Data Attributes and Texts for 0customer. 0Customer has one Display attribute. I add this into the Bex Query Designer.But the data for the display Attribute(SORT1) is not displayed in the Analyzer. I have maintained everything correctly. The Baclkend BI system has Data for the display attribute.
Do we require to do any additional settings in Query Designer for the dat ato be shown when we drag the display attribute into Query Designer Panel. I have maintained the Display settings correctly in Query Designer
Please Advise.
Regards,
Samir

Hi,
are you able to See no data in Field of Attribute(SORT1) or are you not able to see field Attribute(SORT1) in report?
if you are not able to see field Attribute(SORT1) in report, right click on 0Customer, select property and go to attribute tab. select Attribute(SORT1) from left to right. click ok. you will get field Attribute(SORT1) in report.
you are not able to See no data in Field of Attribute(SORT1). activate master data after maintaning master data and chech value is availble in attribute (SORT1)

Master Data Attributes not showing in InfoCube

Hi Experts,
I'm a little lost here. I have loaded the master data for a field ZPARTY(data coming from 3 non-SAP sources S1, S2 and S3) with all its attributes. I have actovated it and I see it as well in the BEx.
Now I have loaded related Transaction data and and I have ZPARTY in that InfoCube as well. Now I can see the attibutes showing up in InfoCube from S1 and S2 but not from S3.
I have deleted the data and reloaded it as well. I made sure that the SIDS get generated as well and I can see SIDs as well but I do not see the data from S1 for the master data attributes.

Hi,
You can check the following things,
1) In the infoobject maintainance screen on the attributes tab, just check that attributes coming from S3 are marked as Navigation attributes.
2) Check whether they are time dependent or independent attributes.
3) Once you load all the data check it in master data view of ZPARTY infoobject and make sure that all the data is active.
4) If you are not able to see the data loaded then check the underlying mappings of infoobject from S3 to ZPARTY in transformation or transfer rule.
5) Finally in infocube check that you have marked all the navigation attributes available for reporting.
Regards,
Durgesh.

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Webi error for master data attributes if universe is on top of BI query

Hi All,
We are using BO XI R2 SP5 integrated with SAP BI 7.0.
We have built a universe on top of a BI query and when we try to build a web intelligence report that includes master data attributes like Customer City,Customer Region etc BO throws the following error:
Error 1:
Database error: [SOFA Driver] : Error getting members for hierarchy (level=ZFI_I03/ZFI_I03_Q0003, member=[ZFI_I03___F172], opcode=[ZFI_I03___F172]) . System error in program CL_RSDM_READ_MASTER_DATA and form VALUEREAD-02- (see long text). Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
For a universe built on a different BI query with master data attributes mentioned above,a different error occuring.
Error 2:
Your Web Intelligence session has timed out. Log out and log in again to InfoView. (Error: WIJ 77778)
We have tried:
1) We have executed the function module BAPI_MDPROVIDER_GET_DIMENSIONS with necessary inputs query/cube and we got correct output, like members, optional properties, selected properties and restrictions.But, still our problem remains same.
2) Transaction u201CRSRTu201D and executed the query,transaction RSRV to check SID-tables and the related masterdata.
Above steps we performed in response to SAP tickets 541052 / 2009,541131 / 2009 based on logs generated,but still the error persists.
What is working:
If a universe is built on top af an infocube directly, then there is no problem with master data attributes in webi report.
Please let us know if you need more details to help us resolve this issue.

Hi Naresh,
based on the MDX you can identify that those are navigational attributes and thats why the issue is not happening when talking to the cube directly because when you connect to the cube directly the navigational attributes are not available.
Take a look at note : 996197
not sure if it will solve the problem because there are other notes when you search for the error message but this was most of the times the one that resolved the issue.
the issue is in the BAPI functions
Ingo

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Can routine replace "master data attribute of" update rule for performance?

Hi all,
We are working on CRM-BW data modeling, We have to look up agent master data for agent level and position for each transaction data. So now we are using "Master data attribute of" update rule. Can we use routine instead of "Master data Attribute of" ? Will it improve the loading performance? Since we have to load 1 lack transaction records , where as we have 20,000 agent details in agent master data.My understanding is, for each record in data package the system has to go to master data table and bring the agent details & store in cubes. Say one agent created 10 transactions, then this option "master data attribute of" will read the agent master data 10 times even though we are going to pull same details for all 10 transactions from master data. if we use routine, we can pull the agent details& storing in internal table removing all duplicates and in update routine we can read the internal table.
Will this way improve performance?
let me know if you need further info?
Thanks in advance.
Arun Thangaraj

Hi,
your thinking is absolutely right!
I don't recommend to use the standard attribute derivation since it will perform a SELECT to the database for EACH record.
Better implement a sorted table in your start routine; fill it with SELECT <fields> FROM <master_data_table> FOR ALL ENTRIES OF datapak WHERE OBJVERS = 'A' etc...
In your routine perform a READ itab ... BINARY SEARCH.... I believe that you won't be able to go faster...
hope this helps...
Olivier.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Ignore duplicate records for master data attributes

dear experts ,
how & where can i enable "ignore duplicate records" when i am running my DTP to load data
to master data attributes.

Hi Raj
Suppose you are loading master data to InfoObject and in PSA you have more than one records for Key.
Let's assume you are loading some attributes of Document NUmber ( 0DOC_NUMBER) and in PSA you have multiple records for same document number. In PSA this is not a problem, as Key for PSA table is technical key and which is different for every record in PSA. But this is a problem for InfoObject attribute table as more than one records for primary key ( here 0DOC_NUMBER) will create Primary Key consraints in database.
This issue can be easily avoided by selecting "Handle Duplicate Records" in DTP . You will find this option under *update" tab of DTP.
Regards
Anindya

Datasource for master data attributes : QUAN fields ?

Hi,
In the datasources for master data attributes (in R3), fields type QUAN are in the extraction structure but not in the datasource (for example field LFMNG is in extraction structure BIW_MVKE_S but is not in the datasource 0MAT_SALES_ATTR).
Is there a standard way to have these fields type QUAN in master data attributes ?
Otherwise I think to this solution :
=> add a field ZZLFMNG type DEC (DEC fields are in the datasource for master data attributes) in a structure append of BIW_MVKE_S
=> in the user-exit for master data attributes : move the value of LFMNG to ZZLFMNG
=> in the infosource in BW : assign an infoobject type QUAN to the field ZZLFMNG
What do you think of it ?
Thanks in advance.

Hello,
I'm adding this field LFMNG too, but after I update the roosfield table an error occurs in RSA6.
This error said that the MEINS field is hide in the DataSource. But we there isn't this field there. Someone knows what should I do?
Thanks!
Eduardo

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Master data attribute not updaing from PSA

Hi all,
I am on 3.5, and the have a custom attribute extension to the 0CUSTOMER object. This attribute is populated in R/3, and populated in the PSA, but not the object itself, or the master data table of the object (/bi0/pcustomer). Has anyone seen this before, or can anyone recommend how to trouble-shoot this?
Thanks.
Dave

Hello David,
Please follow as Sudharshan and Dennis suggested, along with that
1. Check which type of attribute (time-dependent/time independent).
2. Then search accordingly in the table p/q table of customer InfoObject.
3. Try to search in m table of custome (/BI0/MCUSTOMER).
Attribute change run for the particular master data is must to see the data in tables.
4. Just check the Infopackage settings whether the load is till PSA or which option is selected(just to make sure whether the data is loaded till master data tables)- My doubt is the data might be till PSA and not yet processed from PSA to InfoObject, and you are searching the data in master data tables ;-).
Please let us know your findings.
Thanks,
Umashankar

How to change specified hierachy node to master data attribute automatic?

Dear BW experts:
How to change specified hierachy node to master data attribute automatically? I have a retail business: I have a fixed material group hierachy in R3 Retail ,Now I will extract the material group hierachy ,my goal is that the specified material group hierachy node as dimension in query ,not show hierachy level,So I need change specified material group hierachy node to material group's attribute.
Anybody solve the requests?
Thank you for your help in advance !

If I understand your requirement correctly, you need to have a specific Material Group Hierarchy level (Say Level 2) to be an attribute of Material Group. Usually, this level represents a Brand or Segment, or something with specific meaning.
If this is correct, here are the things you need to do:
1) Create an InfoOnject for this specific attribute representing the specified hierarchy level
2) Add this InfoObject to Material Group as an navigational attribute
3) Select this navigational attribute in your InfoProvider
4) Create a transformation routine for this navigational attribute in Material Group Transformation so that the specified hierarchy level for Material Group will be found and populated. The detail of this routine will depend on your specific requirement. Also, you have to make sure Material Group Hierarchy is updated before Material Group attributes are loaded. If you are not family with ABAP, please ask an ABAPer to help you for the Transformation Routine.
5) Include this navigational attribute in your query along with other required InfoObjects.
Hope this help and good luck!
Bill

Show master data attribute time dependent for pervious period

Similar Messages

Maybe you are looking for