Show version for Cisco Blocker

Hi,
As I am not really tech savvy here, we curently have an issue where we need to verify a serial number for Cisco Blocker. However, customer said they did not have a show version and instead provided us with the system status information. However, from it, we cannot derive the correct serial either. Is anyone familiar with how to interpret the system status to derive the correct serial for Cisbo Blocker? Or are there other options the customer can give us to get the correct serial?
I am attaching the system status provided by the customer.
Thanks,
Cathy

Hi,
As
I am not really tech savvy here, we curently have an issue where we
need to verify a serial number for Cisco Blocker. However, customer
said they did not have a show version and instead provided us with the
system status information. However, from it, we cannot derive the
correct serial either. Is anyone familiar with how to interpret the
system status to derive the correct serial for Cisbo Blocker? Or are
there other options the customer can give us to get the correct serial?
I am attaching the system status provided by the customer.
Thanks,
Cathy
Cathy,
In the attachment you can able to see the serial number under the version area.
Hope to Help !!
Ganesh.H

Similar Messages

  • Recommended IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch

    Could someone confirm IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch please.
    It already has 03.06.00.E on it. I am planning to configure VSS on it with similar switch.
    VSS will participate in various Etherchannels (MES).
    Just wondering if there are any known bugs in this IOS XE release.

    Use the Bug Search Tool to look for issues with vss, vsl, etc.
    https://tools.cisco.com/bugsearch/

  • VMware tools and hardware version for Cisco vWLC

    I am currently running a Cisco vWLC (v8.0.100.0) on VMware vSphere 5.5U2 supporting about 20 APs. I just recently upgraded to vSphere 5.5U2 and I was working my way through updating the VMware tools and VM Versions on all my VMs when I glanced at this info for the vWLC. The vWLC shows a VM version of 1 with the VMware tools not running and not installed. I am curious if it is necessary or even possible to update the VMware tools and VM version for the vWLC. The vWLC is working perfectly fine and I have no issue with leaving well enough alone, but this just kind of peeked my curiosity as I really couldn't find any concrete answers in any online documentation. Does anyone have any insight on this matter?

    If it's working, then leave it alone. Some of the Cisco virtual, well maybe most, don't support the VMWARE tools. Updating the version to the latest will make you have to use vCenter as the sphere client will not allow you to edit the VM anymore. 
    -Scott

  • FUS Image version for Cisco 3702 AP

    Dear Team,
    What is the minimum version of Field Recovery image in WLC for Cisco 3702 series ..?
    I have 6.0.182.0 version.. Is that supported..?
    Note: I already upgraded WLC code to 7.6.120.0.

    We recommend that you install Release 1.9.0.0 of Cisco Wireless LAN Controller Field Upgrade Software (FUS), which is a special AES package that contains several system-related component upgrades. These include the bootloader, field recovery image, and FPGA/MCU firmware. Installing the FUS image requires special attention because it installs some critical firmware. The FUS image is independent of the runtime image. For more information, see http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html .
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn76mr02.html

  • WCS and WLC versions for Cisco 3600 WAP

    Hi,
    I got a few Cisco Aironet 3602i. The minimum WLC version to support these is 7.1.91.0. I am planning to upgrade to 7.2.103.0. The minimum WCS version to support these WAP is 7.0.220.0 and the next available 7.0.230.0. Checking the release notes for both of these WCS versions, there is no mention of support for WLC versions listed above.
    http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCS_RN7_0_230.html#wp152663
    Am I missing something here ? What versions would be required on WCS and WLC to make all the three entities (WLC, WCS, WAP) inter-operable ?
    Thanks,
    Regards, Rashid.

    Thanks Scott.
    Table-5 from your link indicates WCS 7.0.230.0 support for WLC 7.1.91.0, although release notes for WCS fails to mention this. I think thats the only option in the our existing WCS based network then. Other option being to upgrade to NCS.
    The NCS page http://www.cisco.com/en/US/products/ps6305/index.html indicates it will be offered to existing WCS customers when releases. Would we be required to pay for the product or both product and licenses or none ?

  • IOS version for MPLS command

    What is the minimum software version for Cisco 2620XM to execute mpls?
    I am running Version 12.2(24)but enable to run mpls command.
    1)Router(config)#tag-switching advertise-tags
    2)Router(config)# interface e0/1
    Router(config-if)# tag-switching ip
    Pls help!!

    It looks like MPLS really does disappear in 12.4 code for the 2651XM (see below). It's too bad because I could use the features and would rather not have to replace a bunch of routers.
    PE#show ver
    System returned to ROM by reload
    System image file is "flash:c2600-spservicesk9-mz.123-18.bin"
    PE#
    PE#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    PE(config)#int fa0/0
    PE(config-if)#mpls ip
    PE(config-if)#tag-switching ip
    PE(config-if)#end
    PE#
    PE#show version
    System returned to ROM by reload
    System image file is "flash:c2600-spservicesk9-mz.124-7a.bin"
    PE#
    PE#config t
    Enter configuration commands, one per line. End with CNTL/Z.
    PE(config)#int fa0/0
    PE(config-if)#mpls ip
    ^
    % Invalid input detected at '^' marker.
    PE(config-if)#tag-switching ip
    ^
    % Invalid input detected at '^' marker.
    PE(config-if)#end
    PE#

  • Driver version for NI4351 under XP

    Hello,
    I am trying to use a NI4351 board to acquire thermocouples under VB.Net with NIDaq 6.9.3f5. I have a driver on the CD that comes with the board. However, installing the driver shows a version for WinNT/95/98. I downloaded from NI Web Site and foudn an ni435x.exe that is supposed to work with Win2K/XP.
    When installing it also shows version for WinNT/98/95.
    When calling functions for the driver, I always get an error FFFFD800. Sample installed with the drvier show up the same problem.
    Thank you for your help
    S. BARTHES

    Currently .NET is not a supported platform for that driver. I know some people have had success getting things to work, but it will take some know-how on your part. Here are some comments from another .NET user with the NI-435x driver. This customer was using C#.
    1) The NI 435x driver must be installed
    2) LabWindows/CVI support must be installed (under DAQ traditional drivers)
    3) Each DLL method that is to be called must be declared  using the DllImport attribute and both the extern and static modifiers.  
         For example, the following is the declaration for the NI435X_Getting_Started_No_Acc  method:
            [DllImport("ni435x_32.dll")]
            public static extern int NI435X_Getting_Started_No_Acc(string resourceName, string channelString, short
    mode, double lowLimit, double highLimit, int numberOfScans, double[] scansData);
    4) The following system namespace must be included to add support for the DLL Import and external method calls:
             using System.Runtime.InteropServices;
    5) The ni435x.dll needs to be linked as a reference for the project.   This will also allow access to the constants defined within the DLL.
         For example, the NI435X_VOLTAGE constant is used in the following:
            short  mode  = (short) ni435x.DLLConstants.NI435X_VOLTAGE;
    6) More information on using importing DLLs and external method calls can be found in Microsoft C# Language Specification - section 10.5.7 External methods, and in Microsoft C# Programmer's Reference - Platform Invoke Tutorial.  

  • Upgrade software version for wireless controller

    Hey
    Does anyone knows or recommend the best stable bug free (or less bugs) software version for Cisco controllers models 5508's and WISM2 .
    Thanks
    Sent from Cisco Technical Support iPad App

    If you have Windows 8 machines, 7.3.101.0.
    If you don't, then 7.2.111.3.
    Otherwise, you can wait for the 7.4.X to be published in the next few weeks.
    NOTE:  Whether you are going to 7.2.X or 7.3.X or 7.4.X, please upgrade the FUS. 

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

    I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

    The 2nd generation can not be upgraded beyond 4.2.1.

  • I can use adobe photoshop cs6,the adobe photoshop show me tril version for 30 days how will be use life time (full version)\

    i can use adobe photoshop cs6,the adobe photoshop show me tril version for 30 days how will be use life time (full version)\

    You can buy it here: https://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_ creativesuite6.html?start=10
    $700 Standard/$1000 Extended  Full price
    $200 Standard/$400 Extended    Upgrade price from CS5.
    Gene

  • I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    Try going to the following
    Tools->Web Developer-> Page Source.
    You can also access this by way of keyboard shortcut Ctrl + U
    The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item.

  • Cisco ACS Server . Download Evaluation Version For Testing.

    Hello.
    I want to try to install ACS server for windows to check how this is working with Microsoft AD. Does anyone know where i can download an evaluation version of Cisco ACS Server for Windows ?

    Hello Michael-
    The ACS version for Windows is no longer available. The product is EOL/EOS:
    http://www.cisco.com/c/en/us/products/collateral/security/secure-access-control-server-windows/end_of_life_notice_c51-664639.html
    The product was replaced with a Linux based version (5.x) and it is a lot easier of a product to install and manage. 
    If you want to evaluate the product I would recommend that you contact your local Cisco partner:
    https://tools.cisco.com/WWChannels/LOCATR/openBasicSearch.do
    Thank you for rating helpful posts!

  • Cisco Network 2009 - Best practices for migrating previous versions of cisco unified communications manager to cucm 7.1

    Does anybody have a copy of the above referenced presentation that you could send me. 
    Thanks in advanced. 
    The presentation can be purchased at the following site:
    http://www.scribd.com/doc/33211957/BRKVVT-2011-Best-Practices-for-Migrating-Previous-Versions-of-Cisco-Unified-Communications#archive
    but felt I ask one of my peeps first. 
    Thanks in advanced.
    Dennis

    Hi Dennis,
    Well..let's give this a try
    Cheers!
    Rob

  • How do I show the running IOS-XE for 4500X switches other than using show version way?

    I am trying to find a way to show the current IOS version running in a 4500X. The show version indicates software running default and other commands like show bootvar only indicates what I have configured. Is there other way? Is it related to configuration register?
    Thanks
    GIL

    I don't understand what you are trying to do.  
    The "sh hardware" (old command) or the "sh version" will tell you the IOS version of the switch.  The version is found in the first line output.  If you want to be pedantic, the same set of command(s) will show you the bootvariable statement as well as the location where the IOS file is located.  

Maybe you are looking for

  • Fault Message generated in ABAP Inboud Async Proxy not visible XI Moni

    Hi     I developed a ABAP Inbound AsyncProxy, which raises an exception using a fault message type. The SMB_MONI in the Business System is displaying the message as Application Error. But the XI Monitor is showing it as sucesfully processed.     How

  • ITunes not listing all groups in Contacts

    I am trying to sync with my contacts in Outlook. I recently added a new group/folder, into which I moved all 'miscellaneous' contacts that weren't already grouped. Now I am trying to sync, and iTunes won't display the new folder. I have rebooted the

  • Macbook - display pics to TV

    I am trying to display pics from Macbook to TV.  The pics are now in iPhoto.  I understand we should be able to use "home sharing" in iTunes to display them on TV thru an Apple TV but we can't seem to get the pics into iTunes from iPhoto.  Any sugges

  • ICloud photo library (beta) problem

    Hello, I updated my iphone 6 to iOS 8.1 and was trying to activate the iCloud photo library (beta) but I have a problem. When I turn on the option a popup says that the sync will start when the device restore from iCloud will be finished. Obviously I

  • How can I install Oracle Workflow?

    Hy! I use OracleDatabase 10.2 on WindowsXP. I want install Oracle Workflow 2.6.3, but I can't do this. The installation guide say "In the Oracle Universal Installer, choose to install into the Oracle home for your Oracle Database 10g, and select Orac