Showing the whole text in a horizontal bars

I have this problem with an horizontal bars graph. There are some questions shown, next to the results to the corresponding answers.
The questions, though, are shorthened with ...
It there a setting or another way to show them in full form?
Thanks in advance :)

Can you explain more clearly .
My requirement is , I need to display the whole content when the user selects the <h:selectOneMenu>
Is there any way where I can enlarge the box which is displayed when user selects any item in the <h:selectOneMenu>
Please let me know if there is any solution.
Thanks in advance
regards,
Pranab
Message was edited by:
ghy

Similar Messages

Web page shows the top of page (a horizontal bar of text), but majority is bumped far right. (1/4 page.) Page shows in other browser. Cleared cache, no help. ?

I have taken a screen shot of the problem page. I don't know why this has happened but it has happened on Firefox for Mac and PC. It does not happen in the Safari browser.
The top of the page looks correct.
Underneath everything is shifted right. This leave 3/4 of the screen to be white. 1/4 of the right side of the page is showing the actual left side of the page.

You can't attach a screenshot to the first post that starts a thread, but you can do that in subsequent replies.
Does this only happen on one specific website?
Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
It is possible that there is a problem with that web page and that there is a clear:both CSS rule missing that causes Firefox to start the next line at the horizontal position where the previous line ended.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Could otool default to showing the whole object file in assembly?

When I try to use otool, it just complains "one of -fahlLtdoOrTMRIHGScis must be specified". I eventually found through Google that otool -tv shows the text section in assembly, but I want to see every section in assembly.
Could otool just default to showing the whole object file in assembly when no command line options are specified?
Specs:
* otool (couldn't find version number through command line options)
* Xcode 4.5
* Mac OS X 10.8.2
* MacBook Pro 2009

Would be nice iif someone from the AE departement could take a look at this. I tested it now with a full LabVIEW 2014 for Mac installation and there is the same problem. The liblvexports.a file in cintools/Mach-O is for both installations (32 bit and 64 bit) a 64 bit object library. Definitely a bug!
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

How to fit to size to show the whole image in image display?

HI, I am using a control palette to display my video images using image display. However, the size is alway out of proportion. How do i show the whole image in the small box screen size. Basically how to fit to size for the images?
Solved!
Go to Solution.

This should do the trick:
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to read the whole text file lines using FTP adapter

Hi all,
How to read the whole text file lines when error occured middle of the text file reading.
after it is not reading the remaining lines . how to read the whole text file using FTP adapter
pls can you help me

Yes there is you need to use the uniqueMessageSeparator property. Have a look at the following link for its implementation.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CIACDAAC
cheers
James

I use Mail. How do I attach a file as an icon rather than showing the full text in the message?

I use Mail for my email messages. How do I attach a file as an icon rather than showing the full text in the message box?

Glad you got it working! Incidentally, if you have a relatively new Apple mouse (Magic Mouse or Mighty Mouse should work), you should be able to enable right-click, if you'd like it, by going to System Preferences - Mouse - and turning on "Secondary click". Third-party mice, like Logitech or Microsoft, should have right-click automatically.
Matt

HT4623 How do I get the calendar to show the whole month and not just the day or week.

How do I get the calendar on my updated i phone 7 to show the whole month and not just the week or the day?

Touch the arrow (or word) at upper left (e.g. September).

My Revolution Not Receiving The Whole Text Message

Hello, lately I have been having a problem receiving the whole text message. People with smart phones text sometimes page length texts. I have no problem sending out page length text, but when someone sends me one, from many different companies and phone types, I only receive what the phone recognizes as the first part of the text message.
An Example is:
"Hello, I was wondering what you are doing later. I was thinking we could go to the shopping later at the mall. Do you ha"
I primary text people so when I do not receive the whole text it is very frustrating.

It's lies that you haven't received any other complaints on this issue. 1) because I have called repeatedly on this exact issue among many others with this phone and 2) here are some of about a dozen posts on this:
https://community.verizonwireless.com/message/876695#876695
and another:
https://community.verizonwireless.com/message/875860#875860
and another:
https://community.verizonwireless.com/message/875820#875820
granted some are recent, but if you search your forums you will see plenty.
You used to and still state that you never hear of any of the many issues with this phone, including when it would randomly reboot. Same phrase, "we have yet to hear of other cases with this device." Bull...
I too will be heavily considering leaving Verizon after over 10 years of being a customer not due to an LG phone sucking this bad, but your company's repeated refusal to acknowledge our concerns and treat us like we are ******.
Like your master reset phrase above. So you think that computing devices need a fresh start anytime something goes wrong is just not correct. If that were the case every time I have fragments between nodes in a clustered server environment I'm supposed to factory reset them?! NO, you debug it and get it working correctly! This issue is fragmenting withing your sms/mms delivery system, so fix it! As a sysadmin for a scientific super computing institute I guarantee I know more about computing devices than you ever will, and I can say your workarounds are asinine and only prolong your customer's issues with a clearly defective device.
As with this, although not your manufactured device, it is something you sell and therefore you debug these issues across your network or give those of us that can the ability to do so, but alas another locked boot loader and if we were to root the device to mitigate these issues then we screw our self by trying to help our self. It's always our fault, as we must have done something wrong.

Please tell me how to go back to a long text I wrote and then i must have accidentally swiped the screen one way or another. How do I go back to the screen so I don't have to re-write the whole text?

Please tell me how to go back to a long text I wrote and then i must have accidentally swiped the screen one way or another. How do I go back to the screen so I don't have to re-write the whole text?

Cloud takes over https://forums.adobe.com/thread/1584746 may help

I cannot copy whole text anymore. It will highlight just one paragraph, and if I go for the whole text, it goes blank. I have the 10.6.8 version.

I cannot copy whole text anymore. It will highlight just one paragraph, and if I go for the whole text, it goes blank. I have the 10.6.8 version.

Hello Banjo62
Try testing that issue out within a new user on your Mac. If it does the same thing, then you will need to reinstall Mac OS X 10.6 Snow Leopard.
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G.

Label object did not show the changed text.

hi,
I 've made change to the text on the label object on the form. Save it and Preview the form. However the form shows the old text of the label. But the text is changed in the design mode.
I close the form and re-open again. the problem is still same.
Does anyone come across this issue ?
Thanks,

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

HT1339 In stage 9 my iTouch shows the apple and a stuck progress bar showing about 10% completion. This after 1/2 hour. What now?

In stage 9 of Restore my iTouch shows the apple and a stuck progress bar showing about 10% completion. This after 1/2 hour. What now?

Refresh my memory as to what stage 9 is? Does the staus bar say anything else?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.

HT201263 my iphone 3g Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes ..plz give me suggusition ?

Stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Is there a way to hide and show the whole 3D viewer with javascript?

I'm trying to set up a pdf so that the person who's reading it can use a button to switch between a picture of the product and a 3D model of the same. The idea is that the two ways of illustrating the product can be in the same space, so that there's still room to put enough text on the front page. I have spent about three hours trying to figure this out.
Even if I hide the model withtin the 3D viewer and make the background transparent, the 3D viewer is still there, intercepting mouse clicks and showing the toolbar.
I've tried modfiying the Annot3D, by moving it off the page, because the javascript reference says that the "rect" property of Annot3D can be written, but the viewer just stays in the same location.
Is there any way to get the whole thing to go away with one button click and come back with another?
Thank you for your help and patience,
Daniel,
PS - In the past I've placed product drawings and pictures in the same place by putting them on separate layers, but I can't figure out how to get the 3D display attached to a layer.

One way you could get the same effect is to use separate pages. Disable the mouse scroll for switching pages and instead use buttons to go from one page to the other. The user will get the impression that the annotation has appeared and disappeared.
Another hack is to use the product information as the icon on the annotation, so just disable it when you want to show the product information and make sure it lines up with an overlay of surrounding product information.

Showing the whole text in a horizontal bars

Similar Messages

Maybe you are looking for