Shuffle works with mac, but not PC

I bought an ipod shuffle two days ago and I wanted to try it out right away. At the time, I only had my macbook with me, so I put the little music I had on that on my shuffle. It worked fine then. When I was able to get on my PC (that has all my music on it) I couldn't put music on it or restore it. iTunes does recognize that it is there. Anyone have suggestions to fix this issue?
MacBook Mac OS X (10.4.6) 2.0GHz (White), 1GB RAM, 80GB HDD; ipod video 30gig (black)
MacBook Mac OS X (10.4.6) 2.0GHz (White), 1GB RAM, 80GB HDD; ipod video 30gig (black), ipod shuffle (2nd gen
MacBook Mac OS X (10.4.6) 2.0GHz (White), 1GB RAM, 80GB HDD; ipod video 30gig (black), ipod shuffle (2nd gen0
MacBook Mac OS X (10.4.6) 2.0GHz (White), 1GB RAM, 80GB HDD; ipod video 30gig (black); ipod shuffle (2nd gen)

http://discussions.apple.com/thread.jspa?threadID=720639&tstart=50 That fixed it for me.

Similar Messages

New shuffle works with Windows but not with Mac

Just got a new 2nd gen shuffle. Initially it was formatted as Fat32 per Disk Utility on Mac. I reformatted to Mac OS (journaled). iTunes was recognizing the new shuffle on the mac and I created a playlist that showed it took up disk space in the "summary" tab. However nothing played on the shuffle when I disconnected it. I was trying to update the software but that function is greyed out. I tried to click "enable disc use" and when I applied it, it says it can't find the ipod. It wont let me update anything. The only thing I can do is create a playlist that the summary says is on the ipod but it doesnt play.
I then connected it to my Windows XP machine and it asked me to reformat the drive, which I did, then everything worked flawlessly. I would really prefer to download things to the shuffle from my Mac than Windows XP but it just won't let me. I tried using "iPod Updater" and the most recent one from the list was 03/2006 and that didn't help anyhting. "iPod Reset Utility" would not recognize the ipod to reset it even after I sucessfully set it to Mac OS journaled in Disk Utility.
I am very frustrated. This also happened to my Nano I purchased a few months ago and I have to organize it on the PC as well.
I am running iTunes 7.2

I have exactly the same problem with my two
computers, both of which are Macs. The shuffle is
recognised on one, but not the other.
Here's a screenshot of iTunes ->
http://www.simongbrown.com/blog/images/2007/shuffle-no
t-recognised.png
BTW, I also have an older white iPod in use on the
Mac that doesn't work.
I've tried a few things (including running iTunes
under a different user account, reinstalling iTunes)
but nothing seems to help. The only thing left to do
is reinstall the OS, but that sounds a little extreme!
That's way too extreme... Use the shuffle Reset Utility.
http://www.apple.com/support/downloads/ipodresetutility10formac.html

Link works on mac but not on pc

Hi -
I am trying to insert a jpg into a dreamweaver file.
I then upload the html file along with the jpg to my server in a folder called "layout"
So the url is: http://www.mysite.com/layout/test.html
The link works on mac, but not on pc's.
Any idea why?
Some links work on pc's like this, and others don't.
Thanks- It's driving me crazy!!

The link is not correct....you have it listed as" mysite.com", which I assume is where you are to insert the name of your url.
Gary

My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?

My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?

Make sure you are using the correct user name / password.
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message

Better touch tool works with touchpad but not magic trackpad, better touch tool works with touchpad but not magic trackpad

better touch tool gestures works with touchpad but not magic trackpad, why please ?

this was an error problem solved

Map Widget - Works on Mac but not in Author

OK, I'm a nube when it comes to Dashcode just so that's out there. I managed to build a custom map widget with Google Maps. The widget works perfectly on my Macs but not in Author. In Author the default place holder remains empty. If I click "edit HTML" I get the Google map, but it's just a generic USA, not the one I created w/ places. Also iBooks refuses to import the book to my iPad until I delete this map.
Do I need to do something or insert special code in Dashcode to make this widget "Author compatible" or are map widgets not allowed?

jfk0404 - I believe that what you're referring to as the "unattractive cartoon-like figure in the widget" is actually the placeholder image for the widget as it appears inline on the page. Once you click that cartoon image the actual widget takes over full screen and loads the html content displaying a functional full size google map.
To replace the cartoon icon you have a few options. The first thing to do is create a new .png file to represent your widget as the placeholder image enticing your readers to click to open the full screen widget and load its dynamic contents. Perhaps a screen grab of your map would be a good idea?
Easy:
Drag your brand new .png image from the Finder into your open source iBooks Author file dropping it on the cartoon image. Done.
More Complex:
Right click (control-click) on the xxx.wdgt file that downloaded from http://classwidgets.com and choose "Show Package Contents." A Widget file is really just a special folder bundle with a .wdgt extension. In there you will find the Default.png file. Highlight the file and press the space bar to see a preview in the Finder's QuickLook feature. That's your cartoon image. Now replace that file with the one you created above. Done.

QTSS Works on Mac but not the other

I have a Server running OS X Server 10.5.8. I am running QTSS and Apache on this machine, however I am having issues with Quicktime streaming. One mac here is able to successfully stream but all other macs on our network fail to connect despite the QTSS "Connections" window shows the connection to the machine trying to stream the video. In the end on the client Quicktime X shows "Not Found" however I am able to connect to the server via other services (ARD, AFP, HTTP). I can post any logs that might help.
Thanks in advance

I couldn't remember what the Display Preferences had said when we tried this last spring and again in the summer, so tonight we connected it again, and wouldn't you know - it worked just fine. We didn't do anything different, so I have no clue as to why it worked this time but not before. He's thinking about getting his own big display, but didn't want to waste his money if he couldn't get it to work, so now I guess we're shopping for another 23" display - probably a used one. Thanks!

Web graphic links work on Mac, but not PC

I have two websites. The old one is DogToysAndTreats.com. The new one is FunStuffForDogs.com. I need to change the home page graphic on both of them to point to my shopping cart pages. I have done this and published the changes on both sites. It works on my Mac but not on my PC.
On www.funstufffordogs.com, the graphic at the top with the bulldogs is supposed to link to http://store.funstufffordogs.com/storefront.aspx. Same thing on www.dogtoysandtreats.com. It works on my Mac in both Safari and Chrome. On my PC, it doesn't work on IE, Safari or Firefox. (BTW, I haven't worked on any of the other links until I can figure out how to do it properly.)
I don't get why the platform has anything to do with it.
Lisa

Looking at your source, the problem may be that the images refer to an external server link from the one actually hosting the website page. Whenever you try to mix servers on a single page, you depend on the network connectivity being reliable to all the servers simultaneously. This can be as much a problem on a Mac as a PC. Sometimes routers have bad router tables, or internet providers do, and this can cause issues for multiserver websites. Using on your router & network settings an OpenDNS DNS server can help:
http://www.opendns.org/

Ichat works with wireless, but not ethernet

Just moved into new office and bought new iMac. I can get internet with ethernet or wireless, but iChat works only over wireless. This is true with my intel Macbook as well. Is this a port or firewall problem, and if so, why would wireless work, but not ethernet?
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)

Who is supplying the wireless internet connection?
Who is supplying the wired internet connection? If
it's two different entities, the IT Secret Police may
be blocking ports on the wired side.
TimeWarner comes in from the outside, but a private contractor is involved in the setup of the wireless which is connected to the TW modem. But if the wireless goes into the TW cable, why does it work as wireless, but not directly plugged in? It is as if converting the signal to wireless cures the problem.
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)
Core2 Duo 24", 1 g ram Mac OS X (10.4.9)

Strange on - Wake on LAN (WOL) works with Win2K3, but not Windows 7

Hi,
I have a PC that I originally had Windows 2003 on. With Win2K3, I can send a wakeonlan (magic) packet (WOL) and get it to power on remotely from my home network/LAN.
I just installed Windows 7 Ultimate 64-bit, in a dual-boot configuration, i.e., so I can boot the machine to either Windows 7 Ultimate 64-bit or Win2K3.
As mentioned, I can power the machine up remotely (from my home network/LAN), but if I've LAST booted into Win7, then shutdown, it doesn't respond to the WOL packet.
I've confirmed that if I boot into Win2K3, then shutdown, the WOL works fine.
I have another PC that has both Win2K3 and Windows 7 (also dual boot), and that works fine with WOL.
One difference between the one that doesn't work vs. the one that works is that the one that works is a machine that I just built a couple of weeks ago, which uses an MSI 880gm-E43 motherboard.
The one that doesn't work also has an MSI motherboard, but it's an older one, an MSI K9NBPM2-FID.
I've cross-checked the various Windows power management settings between the one that works, and the one that doesn't work, but I just can't get WOL to work with Win7 on that older machine. I've even turned the Windows Firewall off completely on the machine where WOL isn't working, but no matter what I've tried thus far, no joy :(...
The only thing that I can think of is that the network card driver (it's the MS one, from the Win7 distribution) might not work with WOL, but I've checked, and it's the latest driver from MS (Nvidia Nforce Networking Controller - 10/17/2008 - 1.0.1.211), and MSI doesn't have a specific Win7 64-bit driver for this motherboard.
So, I was wondering if anyone has any ideas about this?
Is there some registry setting or something that might allow WOL to work?
Thanks in advance,
Jim

Hi,
Unbelievable!
Just for the record, I got WOL working with the older machine, JUST after I posted the original msg.
Here's what I did:
- I was in Device Manager, and did Update Driver, but
- I selected to let me choose, and then I checked the "Show Compatible devices" checkbox
Then, a 2nd, older (10/6/2006 - 6.2.0.127) driver appeared, so I figured, "what the heck?" and tried that. I then shut the machine down, and sent a WOL packet to it, and kind of forgot about it (machines in a different room), but a few minutes later "bing!", the machine had powered up and booted into Win7!!
Anyway, as I said, for the record, and hope that this helps someone in the future.
Jim

Movie works on mac but not PC...help!

Hi!
Hopefully someone out there can help me...
I am trying to make a video play on a website that I designed. The video will play on a mac, but not a PC. When the user clicks on the link, the video (.mov) should start playing in whatever media player that computer has installed, either quicktime or windows media player. It isn't working on a PC. Maybe if I convert the video file to a windows media file or to a file that is easier read my a PC it would work? I don't know how to convert quicktime files into .wmv files.
help!!!
if you want to see the video, click on the "reel" link of www.williamday.net, then click on "reel" again in the middle of the page.

The problem is your page code (or lack of it).
You are directly linking to the file and bypassing any browser plug-in.
http://docs.info.apple.com/article.html?artnum=61011
http://developer.apple.com/internet/ieembedprep.html

XPath query works with CLOB but not with object relational

hi all
i have the following queries,the XQuery work with all, but XPath queries work with XMLType CLOB and Binary XML, but they do not work with XMLType as Object relational,
select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
from xorm;
select extract (object_value,'movies/directorfilms[director/dirname = "L.Cohen"]/films/film[position()=2]/t')
from xorm;
they shows this message
ORA-00932: inconsistent datatypes: expectd SYSTEM.name683_COLL got CHAR
thanks

Hi Marco
fisrt here is my RO
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL=>'http://......../ORMovies.xsd',
SCHEMADOC=>bfilename('DB','Movies.xsd'),
LOCAL =>false,
GENTYPES=>true,
GENTABLES=>FALSE,
CSID=>nls_charset_id('AL32UTF8'));
END;
create table XORM of xmltype
xmltype store as object relational
XMLSCHEMA "http://......../ORMovies.xsd"
ELEMENT "movies";
INSERT INTO XORM
VALUES(XMLType(BFILENAME('DB','ORMovies.xml'),nls_charset_id('AL32UTF8')));
here the XQuery format that work fine with the OR
A/D
select XMLQuery ('for $a in movies/directorfilms/films/film
          where $a/studios/studio = "Gaumont"
          return $a'
     passing object_value
     returning CONTENT)"TitleX"
from xorm;
child element query
select XMLQuery ('for $a in movies/directorfilms/director[dirname = "Feyder"]
          let $b:=$a/../films/film[position()=2]
          return $b/t'
     passing object_value
     returning CONTENT)"TitleX"
from xorm;
here is the XPath format which doesn't work
select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
from xorm;
select extract (object_value,'movies/directorfilms[director/dirname = "Feyder"]/films/film[position()=2]/t')
from xorm;
by the way all queries work fine with the CLOB or Binary XML
many thanx Marco

Why does the FP 10 work with firefox but not with IE8

I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!

Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb

When I click on pictures in eBay or Facebook. It will not show the pictures....Will work with IE but not FF

When I click on pictures on eBay and Facebook...it will not show pictures/enlargements...just blanks....will work with IE. NOT ff

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Airtunes works with music but not with tv show

I have an AE wired to my to my A/V receiver and I play itunes music wirelessly thru the AE and it works fine. Problem: I downloaded a TV show and the audio will not stream via the AE and will only play thru the computer. The video works fine fine in both cases as I have it hooked to my TV via my A/V receiver from my Macbook display port. I am running itunes 8.1 and my AE is on firmware version 7.4.1.
Anyone know why the songs audio works and the tv show audio does not?

Thanks for that fast and definitely a fix at this time. It also works with internet radio, not just the iTunes radio stations. Now my wife will be able to listen to KFOG from San Francisco and I can actually hear my movies, since I am using a MacBook and it is just not loud enough.
Thanks Again Andy.
I love these forums.

Shuffle works with mac, but not PC

Similar Messages

Maybe you are looking for