Shutting down after waking up

hello- my ipad is shutting down after i wake it up. i restored it and it's still doing it. anyone else have that issue? how do i fix? thanks!

You say you "restored it." Does this mean that you have tried restoring it to factory settings?
http://support.apple.com/kb/HT1414
If you have done that, and the problem is continuing, then it's a hardware issue. You'll need to contact Apple for assistance.
I note that you used "virus" as one of the tags in your post... be aware that there is no known malware capable of infecting an iPad that hasn't been jailbroken, and even on a jailbroken or otherwise compromised iPad, resetting to factory defaults would remove all known malware. Whatever's going on, it's not malware of any kind.

Similar Messages

  • Laptop shuts down after waking up (SOLVED)

    Hi,
    I have a Supsend issue with my HP-Pavillion DV6-2155, after an update suspend stopped working. Just after the laptop wakes up it force shuts down and I have to remove the battery in order for it to be able to boot again. I have not been able to find any one else with this issue and I find it hard to diagnose - it does not seem to be somewhat unrelated to suspend. I've tried to look at other suspend problems but I haven't found any viable solution yet.
    I use the Fluxbox WM with an Nvidia GT 230M graphics-card and an Intel i5 processor, don't know what other infos could be useful. 
    All the best,
    Jonathan
    Last edited by mutanabbi (2012-10-11 06:32:07)

    I couldn't connect this issue to this update since a lot of changes happened during the summer. Now I happily switched my whole system to systemd and that seems to have solved the suspend issue very neatly. I'm marking this thread as solved. Thanks for pointing this out to me though.

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • How to find out why my MBP will always try to shut down after 1 hour

    Dear all,
    this is a question too complicated for me to answer; I have previously tried to solve this problem in a usenet forum (comp.sys.mac.system) - but we didn't get it solved there, and I finally gave up on it. However, it still persists, and it is so annoying that I want to try another approach on it this time using the Apple Discussions Forum.
    The problem is as follows: my relatively new (bought in december '09) MacBook Pro 13" (2.53 GHz Intel Core 2 Duo, 4 GB RAM) has a problem: always when I leave it untouched for one hour, something within the system would try to make the computer shut down (system halt). Please note right that this seems NOT to be a hardware-related issue (al least not simply a bad mother-board or sth. similar - there are a lot of threads about MacBooks that seem to shut down immediately, like fainting - this is not the case here). Instead, the system behaves like anytime when a user-requested shut down is invoked - for example, the running applications would check if any changes should be saved, and ask questions. The only thing is: I did not request a system shut down, and even more: I do not WANT the system to shut down. In fact, this whole problem is extremely annoying, since it constantly messes up my open documents (e.g. the TextMate workspace I usually set up, or similar things), forcing me to reestablish my workspace at least once a day. Over time, this can be very annoying for a computer that's used for work!!
    During the course of my earlier discussions in the forum, we tried to find out what makes the computer go down - looking through the system log files etc. - but to no avail: we couldn't trace back the event that has caused the system to invoke the shut down procedure. However, it seems that this issue is related to the Mac operating system, and not the hardware - and this is why I ask this question here (and not in the MacBook Pro section). It may be that we simply didn't look in the right place - or not with the right tools - and I hope that there may be some people here with some new ideas how to trace the reason for this procedure. Everything I can tell now with some certainty (and I couldn't do it before in the usenet forum) is that the shutdown seems to be invoked about one hour after the system has been left untouched by a user (no key strokes, no mouse movements); I know this because I use my Mac for a wake up call now - and, since I sometimes need more than an hour for that, I can tell that this problem causes iTunes to quit one hour after the Mac has booted (which makes my wake-up music to switch off... and some of the running applications with no changes to save).
    It would be very important for me to solve and remove this annoying problem, and I think that this really shouldn't happen! Needless to say, I haven't set the energy savings settings such that the system would shut down after one hour (in fact, I have set the system to always stay on when attached to a power supply); still, the problem prevails.
    Does anyone of You specialists have a good clue or smart suggestion where (or probably how) else to look to find out what causes the shutdown? Thanks a lot for taking the time and considering this annoying problem!
    Best,
    Björn

    Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
    What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
    Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
    Best,
    Björn

  • Several Apps seem to just mysteriously shut down after using for a while. Same with Safari, I will be using Safari and it shuts down. Face book too. I've reset and shut down my iPad 3 and restart it, but it stills shuts down. What to do?

    Several Apps seem to mysteriously shut down after using them for a while. Face Book shuts down , netflix, Safari, and other Apps. They work fine for a short while, or a long while, and then shut down and it brings me to my regular desktop screen. I've tried restarting by completely shutting down the IPad until I see the apple pic and turned it back on, but the shutdowns of apps continue. Anyone else have this issue? It generally started shortly after downloading and installing IOS 7......

    Hi jennyoutwest,
    Welcome to the Support Communities!
    The following articles will provide some troubleshooting steps for your iPhone.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    The final troubleshooting step would be to restore your device:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
    Verify that you are using the latest version of iTunes.
    Back up your device.
    Transfer and sync content to your computer.
    Cheers,
    - Judy

  • MacBook Retina shuts down after a few seconds after every boot

    Hi there
    My retina macbook keeps shutting down after booting and rebooting by its own a minute later. No error message is displayed or anything like it, it just magically shuts down.
    It had been working fine until now but it seems to be going crazy for whatever reason...
    When it shuts down by itself, I can't turn it on myself. It does it on its own even if the lid is closed and then shuts down again after about 30 seconds.
    This only happens when it's connected to a power source (it doesn't even start when it's not).
    I have tried to reset the PRAM without success.
    The only time the issue doesn't happen is when I do a Safe Boot.
    Can anybody tell me what is up with my Macbook (I really need it for work AND school).
    Thanks

    Have you done a SMC reset?
    http://support.apple.com/en-us/HT201295
    Run an Apple Hardware Test:
    http://support.apple.com/en-us/HT201257
    Download and post an EtreCheck report:
    http://www.etresoft.com/etrecheck
    Ciao.

  • Mac shuts down after 5 minutes  Help!!!!

    My computer: imac G3, DV Special Edition, 500Mhz, 384 mb ram, 80 gig hard drive
    This is an odd one...like many others before me the computer just died one day. it would not start up, no sounds, just dead. A few minutes later I tried to turn it on and it came on, but 5 minutes later, it died.
    This is the strange part. I took the plug from the socket and waited a few minutes, then pluged the computer back up. It came on. But only for a few mintes and again shut off.
    This time I left the plug in the socket, waited a few minutes and tried again. Nothing.
    I then took the plug out waited about 30 minutes and it came back on for about 5 minutes and shut down. It only seems to come on if I let the computer sit idle with the plug out.
    I have noticed that the computer does not keep time properly.
    What I have done.
    1. I have pressed the Cuda Button, and yes it did start up, but only for about 5 minutes.
    2. I have tried to reinstall the system hardware, but the computer dies before completion.
    Should I replace the battery? What else can be done?
    Help!

    I have the same problem. I don't have good news, though. I have replaced the battery, pressed the reset button, even replaced the power supply board (not the video board -- which is the only thing I have decided I'm not willing to do). My computer usually shuts down after 5 minutes, but will sometimes stay working fine for a couple of hours. I managed to update the firmware and OS to the very latest, but still it dies. Mine will also occasionally flicker and freeze, which can be restarted by holding down the power button.
    I would replace the video board, except the people trying that don't have quite the same problem (theirs don't start up at all), and there is no source I've found that would have new boards, so you would get a bad board, or the same problem eventually. Some people point to a transformer on the video board, but again the symtoms are not quite the same (they smell burt electronics or hear a hissing/crackling sound before it dies.
    I have just packed mine away and I'm working on a new G5, but I sure hope the old iMac can be fixed so my kids can use it. I just didn't want you to have to go down the same road just to find nothing helped. Good luck, and if you have any new ideas, I would be glad to hear them.

  • Mac shuts down after 10 Min.

    My mac shuts down automatically after 10 Min., I must sign in again and the movie or whatever I just watch is still on in the back.
    How can I prefend this cutoff?
    I read all the comments, but no help. Even if I turn off the Mac or unplug it, it does not help.

    No, did not help. I take it to the store. Thanks anyway.
    2014-09-23 1:16 GMT-04:00 Apple Support Communities Updates <
    [email protected]>:
                     You received a reply       *Linc Davis
    <https://discussions.apple.com/people/Linc+Davis?ac_cid=op123456>* has
    replied to your question. You can view the full discussion
    <https://discussions.apple.com/message/26671622?ac_cid=op123456#26671622>
    in Apple Support Communities.            mac shuts down after 10 Min.
    <https://discussions.apple.com/message/26671622?ac_cid=op123456#26671622>
    From the menu bar, select
               ▹ System Preferences... ▹ Security & Privacy
    If there's a closed padlock icon in the lower left corner of the
    preference pane, click it and enter your login password when prompted.
    Click the Advanced button and, in the sheet that opens, uncheck the box
    marked
              Log out after … minutes of inactivity
                Correct Answer
    <https://discussions.apple.com/email/thread/6553056/correct/26671622> Helpful
    Answer
    <https://discussions.apple.com/email/thread/6553056/helpful/26671622>    Use
    the buttons above to tell Linc Davis and the rest of the community if this
    reply solved your question or helped you get closer to finding a solution.
    To reply to Linc Davis, go to the discussion
    <https://discussions.apple.com/message/26671622?ac_cid=op123456#26671622>
    in Apple Support Communities.        You are receiving this email from
    Apple Support Communities. You can change your email preferences in your Apple
    Support Communities Profile
    <https://discussions.apple.com/user-preferences!input.jspa>.   TM and
    copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.   All
    Rights Reserved <http://www.apple.com/legal/> | Privacy Policy
    <http://www.apple.com/legal/privacy/> | Terms of Use
    <https://discussions.apple.com/docs/DOC-5952> | Apple Support
    <http://www.apple.com/support/>
    >

  • Mac shuts down after boot. Is it the logic board?

    mac shuts down after boot. Doesn't go beyond gray screen with apple.  Is it the logic board?
    I do not have the start up disks to safe boot or check the hardware.
    Any ideas what the problem is or is it junk?  It is 8 years old.

      Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile Wait awhile while you harddrive
    is being checked.
        http://support.apple.com/kb/ht1455
    I'd let the machine sit for awhile in open firmware & see if it stays alive.  Do a few prints.
    Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    Restore Tiger 10.4 & Leopard 10.5  DVDs are available from Apple by calling 800-767-2775 as of January 20, 2013.
    https://discussions.apple.com/thread/4720126?tstart=0

  • Is there a way to prevent ibooks author from shutting down after just one or two uses of the alpha tool?

    Is there a way to prevent ibooks author from shutting down after just one or two uses of the alpha tool?

    Hello One Job at a time,
    Deleting the application will not delete your projects.
    Normally I keep all my work files on a separate drive.
    If you command click on the title name of your project you will get a drop down path to show you the location of your book project.
    or you can click on the drop down triangle beside its name to duplicate.
    Just remember where you saved the file too.
    In your applications folder on your computer select the iBA icon and press delete and also erase / empty the trash can.
    You can then go back to the APP STORE and install iBA from new again.
    I hope this helps.
    Regards,
    Nigel

  • Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

    PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
    I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
    I also installed premiere elements version 12 with the same problem.
    What can be the problem here, please help?
    Thanks.
    Wim.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • Mac won't shut down after 10.6.8 update - a possible fix

    I noticed that after updating my MacBook Pro to 10.6.8 (using the latest 1.1 combo update) that often times when attempting to shut-down after using Safari the computer would just hang or, I'd get a message that said something like, "OSX didn't log you out because Safari did not quit...".
    After putting the system into SAFE BOOT mode and trying to launch Safari I was getting tons of errors about Flash Player plug-in 10.6 crashing.
    After downloading the latest Flash player plug-in from Adobe the hang-on-shutdown behavior seems to have stopped.
    FYI for those who haven't found a fix.

    Hi, I've just come accross the same problem... did you manage to get a resolution??
    Cheers, Chris.

  • After having shut down after installing updates, when I restarted and tried to open a word file, it started opening ALL the word docs and the only way I could stop it was by"force quit"  arted  and tried to open

    After having shut down after installing updates, when I restarted and tried to open a word doc, it started opening ALL the word docs and the only way I could stop it was by"force quit"  . This is REALLY annoying!!

    May be it is the Resume feature.
    System Preference > General > Number of recent items
    Uncheck the box next to      "Restore windows when quitting and re-opening apps".
    Best.

  • EXTERNAL HD WONT SHUT DOWN AFTER SHUTTING DOWN LOGIC ,HELP

    When Im done recording in logic and after I close down the session and shut logic down. I then try to shut down my external HD and I get a message saying " LOGIC IS STILL IN USE AND EXTERNAL HD CAN NOT BE SHUT DOWN, TRY QUITTING APPLICATIONS AND THEN SHUT DOWN" Logic is already shut down and there are no other applications running and it wont let me shut down my external HD. I tried to switch HD's and it still wont shut down after I close all applications. PLEASE HELP....
    Message was edited by: philip j

    When you say shut down, you mean "eject" right?
    Will it, incidently, eject during a session when you haven't used Logic at all?
    One thing you should make sure of with your external HD is that it is formatted correctly - it needs to "un" journalled... may not be the problem, but worth checking.
    What kind of external HD is it?

  • HT1414 my iphone has problem in open and if it open iphone shut  down after few minuate

    I have bought this iphone5 from Hannova German in April2013 and I am using this iphone5 in Nepal. In Nepal there is no authorized dealer. This problem came just from 15th July 2013. It has problem in opening and if it open it shut down after few minuate. So how to solve this problem and I think it has a guarantee period. I woud like your support to solve this problem. Thank you.
    <Edited by Host>

    Hi Prashun,
    Thanks for visiting Apple Support Communities.
    You can use these steps to troubleshoot your iPhone if it's powering off unexpectedly:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    Jeremy

Maybe you are looking for

  • 1st Gen Ipod Shuffle not updating with iTunes 7.0whatever

    My 1st gen. shuffle was doing just fine updating from my iTunes playlist with the older version of iTunes. Then last night I upgraded to 7.0whatever the latest version is and now when I plug in the shuffle to update, I get the usual updating iPod mes

  • FM to update Vendor Master record

    Hi, Is there a Function Module which we can call to update Vendor Master record. Most specifically, I would like to update the Name1 field. The program I am creating will run as a daily job and we do not wish to use BDC. Any help is appreciated. Than

  • Planning Layout- Assigning Curr and Unit

    Hi All We created a layout for statistical items everything is fine we selected amount and quantity as key figures. Please let me know the possibilities of actions we are looking. I dont know whether we can do it or not just for confirmation from thi

  • [Solved] sshfs connection: Nothing happens after password prompt

    Hey, I'm trying to mount a remote folder via ssh. User on the server side is different from local user. After entering sshfs -C userserver@server:serverfolder clientfolder I get the password promptfor userserver. Then nothing more happens. I've read

  • Updating from a Mac

    Hello, I'm a very happy user of a N93 I am also a very happy user of a Mac Now that Nokia provides Nokia Media Transfer for the Mac (a very nice utility) us there any hope to see a Nokia Software updater running on Mac OS X ? Thanks in advance Mac O