SICF and SOAMANAGER for using enterprise services

Hi,
I need to publish enterprise services from my ERP backend to the Services Registry on my PI server.
According to the tutorial (https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20b723f8-a422-2c10-aca5-fe64eeda1ff2), I have to first activate the services in SICF and create endpoints for the corresponding services in SOAMANAGER.
I suppose, only after that I could publish the configured services in SR using WSPUBLISH, right?
Now, if let say I want to publish all enterprise services in my ERP backend, I have to select all the services in the WSPUBLISH, as stated in the instructions of the tutorial (http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/108ef7ba-8abd-2a10-f787-d5f29c5f1b88). But the problem is, do I need to configure every single enterprise services using SOAMANAGER? If not, only the service definitions would be published?
Hopefully someone could clear my doubts.
Thanks.
Regards,
Joon Meng

Hi Venu,
I could not see any nodes for end points in the SICF. So I manually created a service endpoint in SOAMANAGER and then published it to the Services Registry via WSPUBLISH. However, I was surprised to see two endpoints (one was created by me) in the Services Registry.
The service is "ECC_PURCHASEORDERCRTRC" and there are two endpoints for it in the Services Registry:
1. ECC_PURCHASEORDERCRTRC_Binding (created by me)
2. PurchaseOrderCreateRequestConfirmation_InSoapBinding
When I open the service in SOAMANAGER and navigate to the "Configuration" tab, I only see the endpoint from me (with "Manually Created" for Creation Type).
I wonder if the 2nd endpoint was created automatically during the service publishing?
Regards,
Joon Meng

Similar Messages

Facebook and Twitter for Blackberry Enterprise Service (BES) 5.0.4

We have a restriction in our organization to app world, and we are doing a POC for Facebook and Twitter apps. We want to allow users to download/access certain apps only.
We plan to publish this on to the user handset thorugh BES. Can someone, tell me where can i get the installation file (alx and cod) for Facebook and Twitter. Also, is it safe to use these file in enterprise set-up, i mean there is no leagal issues?
Thank You.
Regards,
Ashish
Solved!
Go to Solution.

Hello ashishl,
Thank you for your question regarding obtaining the Facebook and Twitter applications.
All of the applications that BlackBerry makes are available via the BESC.
Here is the link for the site: www.blackberry.com/besc
Let me know if you have any other questions.
- LW
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Accept as Solution for posts that have solved your issue(s)!

Using Enterprise service for POS integration to POSDM

Hi
I have few question on using Enterprise Service for POS Inbound .
1. Is it possibe to get this XML schema for Enterprise Service
2. Lets say we have to use a third party POS to integarte POSDM via PI. But then if we don't want to do any transformation in SAP PI, then can we use the following option:
SAP POS sends the data in the ES XML format
SAP PI just transports this to POSDM
I do see some drawbacks of POS sending the data in the ES service format. As this means, if any change needs to be done based on any new requirements, we need to change the source code. However the above option should still be technically possible?
Any reference if the above approach had been used in any projects. We have always used the following flow:
POS--> PI---> POSDM . PI to POSDM is through the RFC /POSDW/CREATE_TRANSACTIONS_EXT.
Regards,
Fazila

Hi Fazila,
The ES bundle "PointOfSaleTransactionERPBulkCreateRequest_In" can be used to transfer POS transactions to POS Data Management directly.
In order to access the above-mentioned ES, please use the Integration Builder in your PI system in transaction SXMB_IFR and follow the link to the Integration Repository.
This structure can be enhanced to capture additional information.
Award point if useful.
Regards,
Ramki

How to use Enterprise Services without ESR.

Hello,
We use SAP ERP6.0.
We would like to use SAP Enterprise Services as a evaluation by .NET application.
We do not have SAP NetWeaver PI and CE now.
Without ESR (PI and CE) , how do I configure ERP 6.0 to use Enterprise Services?
Please let me know.
Best regards,
Koji Nagai

Hi,
ESR is not compulsory for just consuming service.
First you need to activate and configure webservice.
Step1: Goto transaction SICF and activate service you want to evaluate. You can find ES under path: /default_host/sap/bc/srt/xip/sap/
Step 2:Goto transaction: SOAMANAGER and under tab: Application and Scenario communication chose single service administration. Now search for "Service" pattern: service name you selected and activated in SICF field = Internal name. then go.
Step 3: you will be able to see your service here, now select service and click on apply selection.
Step 4: Under the "configuration" tab select "Create service" button. Give any name to "New Service Name" type some description and finally give any name to "New Service Name" and apply setting.
Step 5: Select authentication type http and save,
Now under tab "Overview" you can see some url for "Open WSDL document for selected binding" use this url in your .Net application.
Regards,
Gourav
Ps: I always have ESR and all necessary configuration so don't know if required settings available in your system to work this scenario.

How i use Enterprise Services?

Hello @ll experts,
i hope that is the right Forum-Category.
I don't find any description, how is use Enterprise Services with SAP PI for my IT-Scenario.
Actual situation:
I import the XI-Content (there is the Service Interface to use for the ES) in the Enterprise Service Repository (SAP PI 7.1), copied the Service Interfaces and all dependence Objects in my own Software-Compoment.
My Question:
What i should doing to config in my sap ERP ECC 6.0 with the Enterprise Service to connect with SAP PI 7.1?
Maybe ABAP-Proxies?
Thanks in Advance,
best regards
armin

Hello,
Once you build Service Interface in PI, you need to generate PROXY in back end ERP system using SPROXY. After that you need to implement the Proxy Class Method by writing glue code using SE80. Now, you may setup End Point using SOAMANAGER. Please see the link for details: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60cb2b4c-af72-2b10-a3a2-a2f718d2a565]
Thanks,
Venu

How to find BADI for the enterprise service?

Hi Experts,
We are enhancing an enterprise service for Businesspartner creation by adding an additional field in the structure. But we are not able to find out the correct BADI for the enterprise service. We are using the following enterprise service - 'BusinessPartnerERPCreateRequestConfirmation_In' . I could not find any BADI in ES workplace also .How to search for a BADI for this ES.
Any help on this will be well appreciated.
Thanks in advance
Sanu

Hi Sanu.
Not all the services is an BAPI or BAPI, maybe this is an interface.
To see the related object go to esworkplace and find the service.
You will find in the page the label "Related Web Service Definition".
Copy the related value(in your case ECC_BusinessPartnerCrtRC) it and go to SAP GUI. In transaction SE84, go to enterprise service and choice service definition.
Paste the value copied in esworkplace in field Service Definition, then F8.
In the next screen double click in the returned value.
In the next screen you will see a Reference Object field. Double click in the value and you will see the related object.
In this case is an interface. You can see in Provider Class.
Hope that's help you.
Marcos

What is the best malwear detection and protection for use on a Mac?

What is the best malwear detection and protection for use on a Mac?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

POS Integration-POSDM, ERP, PI - using enterprise services-Connectivity Kit

Hello,
below you find a link to the official Connectivity Kit for Integration Scenario: POS Integration.
The integration scenario POS Integration is based on SAP ERP and SAP NetWeaver BI /SAP POS Data Management using enterprise services.
You will find an implementation Guide as well as descriptions of the enterprise services used.
https://wiki.sdn.sap.com/wiki/x/1ACFAQ
Best Regards,
Markus

Hi, Markus,
thank your for your input! very interesting!
I'm wondering which benefits this POS Integration over Enterprise Services has, comparing with the conventional IDoc transfer?
Regards
Rene

Settings for idempotent enterprise services in ECC

Hi,
I want to use enterprise service ECC_GOODSMOVEMENTCRTRC1 / GoodsMovementERPCreateRequestConfirmation_In_V1 within a nonSAP application to post GoodsMovements at an ECC system.
http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=…
The service works and I can do all movement types I want.
Now I want to have idempotency activated at the ECC system.
But nobody of the ECC guys knows, what has to be done for this.
What transaction has to be used?
Is there a default value for the time frame for which the system keeps responses for already processed service calls?
If not, I would propose 100 days, because this is the worst case, the nonSAP application could send a message again.
Are 100 days to large for the idempotency time frame of an ECC system?
Regards
Roland

Now I have got readonly permission for transaction SPRO at the ECC system.
The path to the idempotency settings is:
SPRO -> SAP Reference IMG -> Cross-Application Components -> Processes and Tools for Enterprise Applications -> Enterprise Services -> General Settings for Enterprise Services -> Define Settings for Idempotent Services
Permission for transaction WSIDPADMIN is required to execute the activity "Define Settings for Idempotent Services". I don't have this.
But there is a good explanation in SPRO what has to be done in "Define Settings for Idempotent Services"
Define Settings for Idempotent Services
Use
Enterprise Services for which you need to ensure that every service call is executed precisely once are called idempotent services.
You use this IMG activity to define how long the system keeps stored response messages or details about query messages (the message IDs) for which responses have already been sent for synchronous Enterprise Services. You have to define this for each client in which you wish to use synchronous Enterprise Services.
In order not to burden the database by storing the response messages or message IDs unnecessarily long, the system schedules two background jobs to regularly delete stored response messages and message IDs:
SAP_BC_IDP_WS_SWITCH_BD for response messages
SAP_BC_IDP_WS_SWITCH_BDID for message IDs
The system uses table pairs to ensure that the response message or the ID of the answered query message is deleted as soon as possible once the set retention period has expired:
One table pair for each client for the response messages
One table pair for each client for the message IDs that have been stored
The two tables of a table pair are entered alternately. When switching from the first table to the second, the data in the first table is retained and that in the second table is deleted before the system generates new entries.
You decide how ofter the system switches back and forth between the tables of a table pair. The result is the minimum retention period for the stored data.
Requirements
This function is available to you as of SAP NetWeaver 2004s SP09 and ECC SE 600 SP03.
Activities
In the Document section, define the minimum retention period for the response messages. You do this by specifying how often you want the system to switch between the two tables.
In the Document ID section define the minimum retention period for the message IDs. You do this by specifying how often you want the system to switch between the two tables.
SAP recommends you define a longer retention period for the message IDs than for the response messages. Bear in mind that a repeated query message leads to an error if the corresponding response message has already been deleted but the message ID is still available.
To save what you have defined, choose Schedule.
Repeat steps 1 to 4 for all clients in which you wish to use Enterprise Services.
Example
You have defined the time for switching between the two tables in which the response messages are stored as two hours. This means that the response messages are kept for at least two hours but for no more than four hours.
You have defined the time for switching between the two tables in which the message IDs are stored as one day. This means that the message IDs are kept for at least one day but for no more than two days.

E2Open interfaces built using enterprise services

We need to build purchase orders related interfaces with E2Open and discussing on using IDOC vs ESOA services that were provided by SAP with Ehp4. We need to extend these services to get our custom data and using IDOCs would save time. There is web methods/software AG server (middleware) that will translate SAP structure into OAG structures.
Any suggestions/pros & cons on IDOC vs ESOA?

Hi Rajani,
My personal opinion:
I think that you need to think more long term, using IDOCs would save you time now but significantly reduces your flexibility. You should also factor into consideration business goals & strategy (where the company is headed towards).
If you have an ESR (Enterprise Service Repository) in your landscape (it comes shipped with SAP Netweaver CE or SAP PI), there's nothing stopping you from extending the standard SAP Enterprise Services to cater for your custom data. If you don't, an option would be to create custom Abap programs that wrap the enterprise service functionality & cater for your custom data. You could then web service enable those custom programs.
I'm personally not a big fan of IDOCs because I think that they are too cumbersome to use but they also work well. You need to ask yourself, some questions like:
- What if a business process changes, what would the impact be if you choose IDOCs over enterprise services?
- What if you at some stage need to orchestrate provisioning interfaces to cater for changing business / market / regulatory conditions?
- How much is SAP investing in Enterprise Services vs IDOCs?
- How agile is the approach of using IDOCs vs Enterprise Services?
- Does using IDOCs give you an egde over competitors & if there is a business opportunity that needs to be capitalized on, how quickly can you adapt the IDOC scenarios to take advantage of it?
- What about skill levels (developers etc.) for IDOCs & Enterprise services?
- Budget constraints?
These are just some questions...
On the whole, I think that Enterprise Services would work better but it depends on your specific circumstances & SAP is investing significantly more on Enterprise Servies than IDOCs so you would get that added benefit.
Regards, Trevor

Use Enterprise Services without service registry?

Hello experts,
this question is following me since days: is it possible to use enterprise services from an erp-system without a service registry?
From my understanding the service registry at runtime determines the endpoint where the service is implemented. But when there is just a single erp-system is it then possible to use this services without any additional systems?
Thanks for any answer.
Regards,
Norbert

Yes you can.
The service registry is just a "phone book" of services. as much as phone numbers exist well without the phone book services exist without a registry.
actually, if you really ever have only one source system for enterprise (or other) services you don't need the service registry. even if you have 3 source systems and you know how to find an overview of the services in each of those 3 systems and if you don't use a 'global' data model you do not really need the service registry.
but this is just my 2 cents. 'publishing' seems to be a common source of joy these days
anton

How to use Enterprises Services Bundles In PI Services Registry

Hi All,
i need information regarding How to use Enterprises Services Bundles In PI Services Registry.
please provide some information. please help me..
regards,
jas
Edited by: jasmines123456789 on Nov 10, 2009 2:42 PM

Hi,
Enterprise Services (ES) bundles are collections of enterprise services, grouped by common business scenarios, which enable customers, partners and independent software developers to extend the functionality of the SAP Business Suite.ES bundles help create composite applications using SAP NetWeaver's enterprise services development and modeling tools. In this way, SAP is promoting an evolutionary path to SOA and lowering barriers to overall SOA adoption.
SAP providing bundles of enterprises for evry industry,if you want to use any enterprise services then you have to read teh documentation for the servcies and how this service can help you to reuse,if you want to provided any extension for the same you can.
All enterprise services stored in Service Registry,first you have to consume the services fromService Regsitry.Service Registry is the place holders where servies available.
refer below link how to use Enterprise Service BundleS
https://wiki.sdn.sap.com/wiki/display/ESpackages/Opportunity+Management
Regards,
Raj

Website not asking permission for using location services in Safari iOS 6

Website is not asking permission for using location services when using Safari mobile on iOS 6.0 (iPhone 4s)
Steps to replicate:
1. Go to http://maps.google.com using Safari
2. Choose "allow" to use location services
3. Close Safari and wait 1-2 minutes such that the arrow sign (in the top right) disappears
4. Go to http://www.nature.com/news/economics-and-genetics-meet-in-uneasy-union-1.11565 using Safari
5. The arrow sign (in the top right) appears showing that the location services are used when viewing http://www.nature.com/news/economics-and-genetics-meet-in-uneasy-union-1.11565 (even few hours later)
Why the site http://www.nature.com/news/economics-and-genetics-meet-in-uneasy-union-1.11565 is not asking permission to use location services?
The Nature journal (site: ww.nature.com) is not affiliated with Google in any way as far as I know!

I figured out how to stop this from happening. I did 3 things, and I'm not exactly sure which one of them did it because I did them all at the same time.
1. Turned on Private Browsing
2. Cleared Cookies and Data
3. Turned off JavaScript
This stopped time.com from using my location without permission.
I then turned off Private Browsing and went back to the same page, and it continued to NOT use my location.
I'm thinking JavaScript being turned off might be the solution. However, there is a bug that causes JavaScript to turn on again without permission at times:
http://appleinsider.com/articles/12/12/21/ios-6-bug-reenables-javascript-in-safa ri-without-user-consent
So just be aware of that. But hopefully doing the above works for you!

Using Enterprise Services Bundles in PI

Hi ALL,
need help in how to use Enterprise Services Bundles in PI.
if someone worked on this pls give me some idea about this and methods to use this ..
if there is any best practice in using this Enterprise Services Bundles ..and i find in some document stating we need to download it from Service Marketplace and import the same into their Enterprise Services repository. can you pls tell me under which segment i can download this ..
thanks
Souz

The SDN home page has good info on ESBundles
http://www.sdn.sap.com/irj/sdn/explore-es
Download contnet from SErvic emarketplace
https://websmp205.sap-ag.de/swdc
Support Packages and Patches - Entry by Application Group" SAP Content - ESR Content (XI Content)
Regards,
Siva Maranani

Sending and receiving values using web services vi

hi trying to receive values values using the webservices vi 's, but im facing same conversion errors. im sending my project and an image of the problem can anyone help me on this?
Attachments:
TZID.zip ‏21 KB
labviewscrn.JPG ‏126 KB

Hi,
Here is a global tutorial about Web Services :
http://zone.ni.com/devzone/cda/tut/p/id/7350
There are exemples at the end of the document : webservicesdemo.zip
Please check the instruction for using web services given in the Readme.doc, it could be the source of your problem.
Also, mind that you need the same language for you labVIEW version than the one used to create the Web service VIs.
Regards,
Rémi M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Les présentations NIDays 2010 déjà disponibles au téléchargement !

SICF and SOAMANAGER for using enterprise services

Similar Messages

Maybe you are looking for