Signature error when user tried to add new database via configuration.

We just moved domain. No changes to database, operating system. As admin I can get in fine with the new domain, but not the user. He tried to create a new database in the configuration dialogue box and got debug error. When you click on next he get a signature error. Any ideas?

I used the information to narrow down what was wrong. You were right about the user. The old user was not working, but after I created a new user that I (admin) was able to logon and see the database, the user still unable to add a new database connection. I went back to the old dbxconnections file and just made edit to the file and put it back into operation and the user was able to see their data again.

Similar Messages

Received error when i tried to add a data source to index

I received an error message when tried to add a data source to the index. The data source is a File system repository.
Error:
The repository needs the properties service to be attached to a classification index.
Your help is greatly appreciate!

Hi guys,
Thanks so much for a quick response.
Are you talking about these services below? if yes, I had already add them to the FS.
properties
RepositoryAttachmentService
subscription
svc_acl
Thanks again,

Error when users tries to create a cart.

Hi there ladies and gents,
We are getting an error when a user is trying to create a cart, the following error appears
"No data found for contact person "XXXXXXXX" Inform system administrator"
We have check PPOMA_BBP and also HR have checked there area and all seems ok???
Any ideas???

What i can tell you after running BBP_BP_OM_INTEGRATE for business partner, employee role, i get the following : -
@5C\QError@ Error determining address for employee DD0A7F0F4A3D83F1AA8D0016353BF3FF @5F\QNo long text exists@
and
@5C\QError@ Employee relationship between BP 0000004261 and BP(Org) 0000002669 missing @35\QLong text exists@
The help says the following but i am sorry to say it means nothing to me : -
Employee relationship between BP 0000004261 and BP(Org) 0000002669 missing
Message no. BBP_UM_UI040
System Response
The assignments of the BP units of the employee &V2& -> Natural person of the employee (if necessary -> Contract) -> Work Center -> Position -> BP of the Position lead to BP &V1&. There is, however, no connection between the business partner objects.

When i tried to add new contact in my ip5, the keyboard to key in the name did not appear. Pls help.

When someone called me, i tried to add his phone number into my contact, but the keyboard did not appear when i wanted to key in the names or other details.

Hi, tenangaku.
Thank you for visiting Apple Support Communities.
I would recommend closing all applications in multitasking and power cycling the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

Error when user tries to seek feedback from participants of a 360 appraisal

Hi
When user is clicking on the Request Feedback button, the following error is generated:
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20002: 3133: Activity instance 'HR_PARTICIPANTS_BLOCK' is not a notified activity for item 'HRSSA/213075'.
ORA-06512: at "APPS.WF_ENGINE", line 5666
ORA-06512: at line 1
The intention is to invite a participant to review the employee. Any one who has encountered this issue or has a hit to it, please help.
Thanks
Upma

Hi,
If anyone has any idea about this issue, please help.
Thanks
UJ

Xennet error, when tried to add new network card

Hi,
I got an error when I tried to create new virtual network thru VM manager,
I have add a new virtual network card thru VM manager in the same Xen bridge "xenbr0" , then i reboot the virtual machine, but when i tried to activate this network I got the below error:
cannot activate network device
xennet device eth1 does not seem to be present, delaying initialization.
ifconfig in the virtual machine:
dev13248 Link encap:Ethernet HWaddr 00:16:3E:0B:DD:E4
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:16:3E:5A:3E:6E
inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::216:3eff:fe5a:3e6e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:204 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:47253 (46.1 KiB) TX bytes:5623 (5.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1045 errors:0 dropped:0 overruns:0 frame:0
TX packets:1045 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1458998 (1.3 MiB) TX bytes:1458998 (1.3 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifconfig in the VM server:
eth0 Link encap:Ethernet HWaddr 00:1C:C4:46:AF:3D
inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:110 errors:0 dropped:0 overruns:0 frame:0
TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:13177 (12.8 KiB) TX bytes:17612 (17.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:1C:C4:46:AF:3E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:2052 (2.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:1C:C4:A6:B8:0E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth3 Link encap:Ethernet HWaddr 00:1C:C4:A6:B8:10
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:127 errors:0 dropped:0 overruns:0 frame:0
TX packets:127 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11984 (11.7 KiB) TX bytes:11984 (11.7 KiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:127 errors:0 dropped:0 overruns:0 frame:0
TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14405 (14.0 KiB) TX bytes:17422 (17.0 KiB)
Interrupt:21
peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:23
peth2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
Interrupt:16 Memory:f8000000-f8011100
peth3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:23 Memory:fa000000-fa011100
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:98 errors:0 dropped:0 overruns:0 frame:0
TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17612 (17.1 KiB) TX bytes:13177 (12.8 KiB)
vif0.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2052 (2.0 KiB) TX bytes:0 (0.0 b)
vif0.2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2236 (2.1 KiB) TX bytes:0 (0.0 b)
xenbr1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1968 (1.9 KiB) TX bytes:0 (0.0 b)
xenbr2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Don't inject the Windows 7 version of the driver into your WinPE image. Depending on what version of ADK you are using determines what version of the driver you will inject into WinPE. If you are using MDT 2013 with ADK 8.1 you are using WinPE 5.0/5.1
which is basically Windows 8.1. Make a selection profile explicitly for your WinPE drivers to inject. Only include the drivers you want in the WinPE image. And match the architecture of the network and storage drivers (Windows 8.1 versions).
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

500 Internal Server Error when trying to add new members

My Workspace is working correctly but when I try to add new users, I get the following error:
500 Internal Server Error
Thanks
Michel C.

Hello Michel,
How are you processing to add new members?
You should be manager of your workspace and
- go to http://beehiveonline.oracle.com
- click on buttom "Create Group or Add New Members"
- Choose your group
- CLick on the link "Add new member"
regards
Fred

Ora 12154 error when trying to add a database to VS Server Explorer

Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
Emad

Hi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad

I got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

When i try to add new mail to my macbook pro it crash on me.but sometimes it says account verified but mail still wont open. help please

when trying to add new mail to my macbook pro it crash on me
help please
thank you

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use. I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it. Any ideas on what to do?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

An error occurred while trying to add selected printer

I have a imac osx 10.7.3 and I am trying to reset my printer because my computer says an error occured while trying to add selected printer. When I push the control button and push the add button nothing happens am I doing something wrong.

found out what to do

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Signature error when user tried to add new database via configuration.

Similar Messages

Maybe you are looking for