Silence detection using Cisco Wave Drivers

We are trying to use silence detection on CTI port terminated calls with TAPI and Cisco Wave Drivers. LineMonitorDigits works but LineMonitorTones does not work for Silence with all frequencies set to ZERO.
Thanks,
Mario

Try:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00800da42a.html#1003516

Similar Messages

Firewalling vlans on Catalyst 6500 by using Cisco ASA Firewalls

Hello,
How to secure vlans on Catalyst 6500 by using Cisco ASA Firewalls?
There are no free modules on Catalyst 6500 to install a FWSM module.
What is the best configuration to secure vlans (~80 vlans) by using cisco ASA firewalls (context, hairpining...)?
Thanks

Hi Bro
Just to understand your question once again, you don't have anymore available slots in your present Cat6K, but you want to know how to secure your VLANs or SVIs that has been configured in your Cat6K?
If you were to ask me, I would not apply a bunch of ACLs in the Cat6K, for starters. You might wanna look into COPP (Control Plane Policing) instead. Furthermore you could also refer to this Cisco document http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00801b49a4.shtml
However, if you do have Cisco ASA FW appliance (not module, I presume from your question), you could enable ACLs, threat-detection feature, IP Audit features, reverse-path policing, capping of the embryonic values etc.
P/S: If you think this comment is useful, please do rate them nicely :-)

Satellite P500-12D - Can I use the nVidia drivers?

The Latest NVIDIA Drivers on the Toshiba update website are 8.15.11.8642 but there are newer versions on the NVIDIA website. I would like ot update the NVIDIA Drivers but I am having difficalties.
I tried to install version 195.62 (Win7 64bit) for the Geforce 200M Series fron the NVIDIA SITE but the install doesn't complete. I get the message: "The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
Does Toshiba only allow their own versions of the drivers? Is there a way to allow the NVIDIA drivers to istall?
SYSTEM INFO: OS WINDOWS 7 64bit
Date 2010/01/03 01:14:58
[PC Information]
Model Name SATELLITE P500 12D
Part Number PSPG8E-01D007EN
Serial Number x
OS Version Microsoft Windows 7 Home Premium 6.1.7600
BIOS Version V2.50
CPU Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz
Physical Memory 4096MB RAM
Hard Disk Capacity 749,744,054,272 [Byte] 698.254 [GB]
Hard Disk Free Space Capacity 644,687,319,040 [Byte] 600.412 [GB]
Video *NVIDIA GeForce GT 230M* version=8.15.11.8642
Screen Resolution 1680 x 945 Pixels
Color Quality True Color (32 Bit)
Sound NVIDIA High Definition Audio version=1.0.0.59
NVIDIA High Definition Audio version=1.0.0.59
NVIDIA High Definition Audio version=1.0.0.59
NVIDIA High Definition Audio version=1.0.0.59
Conexant Pebble High Definition SmartAudio version=4.98.6.63
Network Atheros AR8131 PCI-E Gigabit Ethernet Controller version=1.0.0.17
MAC Address=00:26:9E:90:F3:E7
Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
version=2009.1.1222.2009 MAC Address=00:26:B6:9A:1E:2F
Modem None
Internet Explorer 8.0.7600.16385
IDE Device TOSHIBA MK5055GSX
IBG 4H6Z0XEVG SCSI CdRom Device FW version=1.03
HL-DT-ST DVDRAM GT20N FW version=CT10
[QFE Information]
Windows Security Update "KB973525"
Windows Update "KB974332"
Windows Update "KB974431"
Windows Security Update "KB974571"
Windows Update "KB975364"
Windows Hotfix "KB975467"
Windows Update "KB976098"
Windows Security Update "KB976325"

Hi
Counter question: Why you want to use other display drivers? Are you not satisfied with the Toshiba drivers or can you notice any problems in Windows?
Theoretically its possible to use the drivers from nVidia directly but dont forget that they are not pretested on your notebook. Your graphic card could be overheating and so you will loose the warranty.
Satellite P500 is pretty new so I assume Toshiba will update the display driver in next time too. Just have a look on the page from time to time. ;)

How do I use Cisco Registered Email Service with 10.7?

I received a email via someone using Cisco Registered Email/Envelope Service. The authentication process required the latest version of JAVA for 10.7, which I downloaded and installed. When I try to logon, the screen hangs with the message "Loading Envelope Tools." If I press "open" again it states "Inactive tools." The alternate method is to open the mail via a secure Web site, which I can open, but I am unable to download attachments. To download attachments, I am directed to a page that begins with "x-msg:" and I get a message that says: "Safari can't open the address .. . because MAC OX doesn't recognize Internet Addresses starting with "x-msg:"

Thanks for the info Roger, this is indeed did work for me (at least the part about signing in on apple.com, haven't tried the rest). Since Apple does not allow for the merging of Apple IDs, my plan is to use the old me.com address (from the free trial) with iCloud but then forward all the messages from the old me.com to my current Apple ID. Problem is all my devices are already associated with iCloud. So... if I want to activate iCloud using the old me.com, how do I do it?
I have two ideas: 1) as you suggest, signing out and signing back in through the iCloud preference pane (either on Mac OS or iOS); but I'm worried this will have consequence - will I be able to sign back in to my main Apple ID account after doing this?
2) create a new user on my Mac and then sign in to iCloud with the old me.com address there, then delete the account.
Thanks for any help with this.

I downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.

i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.

The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others.

R9 270X Gaming 2G, unable to use the latest drivers and Mantle

I just bought a R9 270X Gaming 2G S/N 602-V303-13SB1312109829-398
When I first got the R9 270X, I installed the latest AMD drivers with the full package.
Later I got the, what I found to be, notorious atimkdag.sys BSOD.
I recovered my system partition with Acronis from before I installed the GPU. And installed the drivers found on MSI website which are considerably older than those on AMD’s website. I have not had an atimkdag.sys BSOD since. In fact I think I am using Windows stock drivers as the driver version says 13.251.9001.0, and I think the MSI driver is 13.101.0.0. Not sure how that happened.
Now my understanding is that this GPU should be Mantle enabled, however using Star Swarm Stress Test, which includes Mantle testing, said it found no Mantle enabled GPU. Perhaps because I am using an older driver.
I read somewhere that atimkdag.sys BSOD is linked to AMD Catalyst Control Center. Since I never used that last time I had an AMD GPU, I have disabled it on start-up.
What do you guys think would be the best option here? How can I both enjoy the latest drivers and avoid the notorious atimkdag.sys BSOD. Or do you think I should just stick with the drivers I have, without Mantle enabled. I haven’t actually got any Mantle enabled games at the moment, but are planning to get it though.
It may or may not be important. But I upgraded from Windows 7 to Win 8 Pro then Win 8.1 Pro. Perhaps it is leftover sys files. I noticed in forums that the atimkdag.sys BSOD mostly hit Win 7 systems. Perhaps the reason I am not getting the BSOD now is simply that I am not using AMD Catalyst Control Center, as you would think that if it is left over from Win 7 it should affect both old and latest drivers, right.
Thanks

Please disregard my previous post asking for help.
This is also a message to other noobs like myself, read the F.A.Q. before you post anything in the forum. I read the F.A.Q. about how to update drivers, how to remove old driver fragments and followed it to the letter.
https://forum-en.msi.com/faq/article/where-can-i-download-vga-drivers-and-how-do-i-install-t
Now Mantle works and as for the atikmdag.sys BSOD, hopefully I will not experience this now that I completely uninstalled all previous driver files, using Driver Sweeper in Safe Mode. I do not see why I should.
If against odds it happens, then I will come back and ask you guys for help.
Thanks

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

HT203242 I use ipod classic 120G. When I launch itunes I first of all see a message "The registry settings used by itunes drivers for importing and burning cds & DVDs are missing." I cannot sync my ipod. Any ideas?

I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Issue: Detected use of SPRequest for previously closed SPWeb object

I have a solution to create web site by a custom web template. I used ULS Viewer to monitor the sharepoint error log during the process. I see some unexpected error(Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb
objects when you are done with all objects obtained from them, but not before.)
I believe that It will bring up a memory leak issue in anytime future. so I spend some time to find the root cause. It has no unexpected issue by creating web site with out of the box template(BLOG,WIKI, etc). I will get only get it with custom
template. Does anyone know the reason and soltuon for this issue? Thanks.

        protected void Button2_Click(object sender, EventArgs e)
            string Client = "Client";
            string creatorId = "UserId";
            string creatorname = "Robin Hung";
            string rreatorEmail = "[email protected]";
            SPSecurity.RunWithElevatedPrivileges(delegate()
using (
SPSite newSite =
new SPSite("http://localhost/sites/" + Client))
SPWebTemplateCollection WTC =
newSite.GetWebTemplates(1033);
SPWebTemplate webTemplate =
newSite.GetWebTemplates(1033)["SubSite"];
newSite.AllowUnsafeUpdates = true;
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity.
Verbose,
EventSeverity.
Verbose),
TraceSeverity.Verbose,
"Test 2", "Called");
using (SPWeb spWeb = newSite.OpenWeb())
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity
.Verbose,
EventSeverity
.Verbose),
TraceSeverity.
Verbose,
"Test 21",
"Called");
spWeb.AllowUnsafeUpdates = true;
spWeb.Webs.Add("Robin4", "Robin2", "test", 1033,
webTemplate, false, false);
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity
.Verbose,
EventSeverity
.Verbose),
TraceSeverity.
Verbose,
"Test 211",
"Called");
spWeb.Webs.Add("Robin5", "Robin2", "test", 1033,
WTC["SubSite"], false, false);
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity
.Verbose,
EventSeverity
.Verbose),
TraceSeverity.
Verbose,
"Test 212",
"Called");
spWeb.Webs.Add("Robin6", "Robin2", "test", 1033,
WTC[30], false, false);
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity
.Verbose,
EventSeverity
.Verbose),
TraceSeverity.
Verbose,
"Test 213",
"Called");
spWeb.AllowUnsafeUpdates = false;
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity
.Verbose,
EventSeverity
.Verbose),
TraceSeverity.
Verbose,
"Test 22",
"Called");
newSite.AllowUnsafeUpdates = false;
//currentSite.AllowUnsafeUpdates = false;
SPDiagnosticsService.Local.WriteTrace(0,
new SPDiagnosticsCategory
("Log",
TraceSeverity.
Verbose,
EventSeverity.
Verbose),
TraceSeverity.Verbose,
"Test 4", "Called");

Error Logging into Cisco Agent Desktop whilst using Cisco IP Communicator

Hi there,
I am having an issue whilst using Cisco Agent Desktop Version 7.0. If I use a cisco IP Communicator ( softphone) i get following message, "Login failed due to a configuration error. Please ask you system administrator to associate your phone with the RM JTAPI Provider user ID according to the instructions in the admin guide".
If user logs in to a normal Cisco phone then logs into agent there are no problems.
Bit of a novice so your help would be appreciated.

Hi
In your AppAdmin pages on UCCX, in the Unified CM Configuration screen, there is an 'RM' user defined.
This will be a user in CCMAdmin 'Application Users', which has all your CCX phones associated to it. UCCX uses this to CTI control the handsets... you need to associate the CIPC phone to that user.
Regards
Aaron
Please rate helpful posts...

Problem accessing company resources remotely using Cisco VPN Client

I connect to my company's network remotely using Cisco VPN client both from a PC (v 4.0.1) and from a MacBook Pro (v 4.9.00)(same configs), and use Remote Desktop to connect to my work computer, and now i'm able to use Citrix to run applications on the company server.
The problem occurs on the Mac when I'm connecting from a location that uses the same private domain IP as our company's private domain. Our company's private domain is 192.168.1.x, so when I'm using the Mac on a WiFi router that happens to be set to 192.168.1.1, the Mac can connect using VPN but the remote desktop cannot connect to my work computer. Presumably, the Mac doesn't "know" that I'm trying to go through the VPN for the connection and not connect to something locally.
This problem seems to be unique to the Mac. Every Windows machine with the same client installed has no problems no matter what WiFi I've tried. The Mac works fine on any WiFi that is not 192.168.1.x.
However, since 192.168.1.x is very common (hotels, airports, etc., its a major problem with the Mac.
Suggestions are greatly appreciated!
Also, now that we're moving to Citrix, our administrator has created a webpage on the intranet that we launch applications from, but the Mac cannot find that page when connected to VPN from 192.168.1.x. Same problem.
Thanks in advance.

Hi,
I presume you have split-tunneling activated.
1. Make sure the 192.168.1.x is on the protected networks and on the MacBook client, disable "Allow local LAN access"
2. Create a separate group for the Mac users and assgn them a different pool (192.168.100.x )and advertise it in your company to point to the VPN Concentrator.
3. Use the NAT feature on your VPN concentrator.
If this helped, please rate.
Regards,
Daniel

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Can i use uncompressed waves audio in DVDSP

I want to use uncompressed Wave audio along with my Mpeg2. When i do a built and burn to disc i don't want DVDSP to compress it to AC3 or whatever compressed format. Is there a way to tell it to keep exactly the original file you've use when authoring ??? How do i turn off all background encoding ?? Thanks.

Hi:
When i do a built and burn to disc i don't want DVDSP to compress it to AC3 or whatever compressed format.
DVDSP only encode audio to AIFF format. You'll never get AC3 using DVDSP for encoding your assets (you must use Compressor to get it).
Be aware that using uncompressed audio will take much more space of your disc and a hihger bit rate what in DVD-R builds can cause serious playback problems in stand alone DVD players.
Hope it helps.
Alberto

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
Doesn;t look like it's listed as a feature of the iPad app.

Using Cisco wireless IP phones in Cisco Call Manager 5.1

Hello,
Currently we are using Cisco CallManager ver.5.1.2.3000-2, Berbee InformaCast ver.6.1.1 and Cisco Unity 1.1 Build 10. We like to replace few Cisco IP Phone 7961G-GE with Cisco Unified Wireless IP Phone 7920 ver.3.0. Does CCM ver. 5.1.2 supports Wireless phones? If it does, how do I configure it? Also, do I have to purchase any new license or other hardware?
Any suggestion / recommendations greatly appreciate.
Alex

Yes, it does:
Cisco Unified IP Phone Series 7900
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp51474
Config on CUCM itself is no different from any other phones neither other requirements like DLUs.
Of course you should already have APs for connectivity.
HTH
java
if this helps, please rate

Silence detection using Cisco Wave Drivers

Similar Messages

Maybe you are looking for