Silent install cannot continue. While upgrading 10.2.0.1 to 10.2.0.4

$ ./runInstaller -silent -responseFile /db/OraDb10g/OraDb10g/patchset.rsp
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23 or B.11.31. Actual B.11.31
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-11-12_05-58-47PM. Please wait ...$ Oracle Universal Installer, Version 10.2.0.4.0 Production
Copyright (C) 1999, 2008, Oracle. All rights reserved.
You can find a log of this install session at:
/opt/oracle/oraInventory/logs/installActions2008-11-12_05-58-47PM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
What maybe the problem? I am using the default patchset.rsp file which comes with patchset. I just configured some parameters for my Oracle Instance.
Regards,
Ogan
Edited by: Ogan Ozdogan on Nov 12, 2008 11:18 PM
The problem still persists...

Problem solved,
The issue was, because i don't have any graphical user interface option, i need to run the patchset installer on silent mode with responsefile. On the responsefile, there is a FROM_LOCATION parameter. I set it to database's products.xml rather than setting patchset's products.xml. So when i reconfigured, the problem is solved.
Just an attention for those who followed up this thread.
Regards,
Ogan

Similar Messages

  • Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

  • Plerase can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    BrightBluephotograph wrote:
    I cannot install lightroom 5 until the upgrades from 4 are on the pc,
    You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5.  Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box.

  • OUI-10150 while proceeding a silent install of OEM on RHEL 5.3

    Hello everyone,
    I'm following the procedure 784963.1 on metalink to install Grid Control on a RHEL 5.3.
    While proceeding the silent install, just after the prereqs were passed succesfully, i got the following error in the logs:
    silentInstall2009-06-19_04-12-33PM.log
    *** Error Dialog: OUI-10150:Error: The password for a database account cannot be null. in component Oracle Enterprise Manager Repository Database 10.2.0.3.0 . Installation cannot continue for this component. ***
    User Selected: S&top installation of this component only.
    The password for a database account cannot be null.
    This silent installation was unsuccessful.
    I can access the database via sqlplus with sys, system, sysman and dbsnmp account.
    Anyone has an idea?
    Thanks a lot

    Hey guys...
    I'm having the same problem, and have tried your tips but it didn't work for me:
    *** Error Dialog: OUI-10150:Error: The password for a database account cannot be null. in component Oracle Enterprise Manager Repository Database 10.2.0.3.0 . Installation cannot continue for this component. ***
    User Selected: S&top installation of this component only.
    The password for a database account cannot be null.
    This silent installation was unsuccessful.
    In my case, I can login to the database using SQLPlus with the accounts: SYS, SYSTEM, DBSNMP and SYSMAN.
    Do you have any other tip that would help me?
    I'm using RedHat 5.3 x86-64 as OS and Oracle 10.2.0.4 Enterprise Edition as database.
    I'm following the procedures described at:
    Oracle® Enterprise Manager
    Grid Control Installation Guide
    10g Release 5 (10.2.0.5.0)
    E10953-09
    Item: 8.6.4 Installing 'Software-Only' and Configuring Later (Silent Mode) on Newly Supported Platforms
    - 8.6.4.1 Installing Enterprise Manager 10g Grid Control Release 5 (10.2.0.5) Using Existing Database
    My best wishes,
    Rafael Braga

  • I have no(!) admin pw and I cannot continue upgrade

    I have no(!) admin pw on my iMac and I cannot continue upgrade Maverick because an admin pw is requested

    Hi RolfBerlin,
    Thanks for visiting Apple Support Communities.
    See the steps in this article to update your password and continue installing Mavericks:
    OS X Mavericks: Installer doesn't accept blank admin password
    http://support.apple.com/kb/TS5282
    Symptoms
    When attempting to install OS X Mavericks, a blank admin password is not accepted; you may be repeatedly prompted to enter your password.
    Resolution
    Open System Preferences, then click User & Groups.
    Select your admin account, then click Change Password.
    Enter a new, non-blank password in the New Password and Verify fields.
    Click Change Password.
    Install Mavericks.
    Regards,
    Jeremy

  • Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it

    Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please

    You have to provide your computer's administrator password in order to install Flash Player.

  • "An Office 2003 installation on your computer is corrupted and setup cannot continue" error on Office 2010 Pro install

    I am currently trying to install Office 2010 Pro Plus onto my machine that has Access 97 and Access 2003, Visio 2003, Excel 2003, PowerPoint 2003, and Word 2003 installed. I need to keep the previous versions of Office installed as they are used for development
    work. When I try installing Office 2010 I've stopped with the following error message: "An Office installation on your computer is corrupted and setup cannot continue. Remove or repair the Office 2003 product and re-run setup." I can't remove and
    repair doesn't seem to do anything. Most posts suggest removing previous office versions or deleting/altering the MS Office registry keys (which would damage the previous versions of Office). Is there a solution to install Office 2010 independently of any
    other version of Office installed?

    I figured out a method to finally install Office 2010 bypassing the error stated in the title, by manually removing all the keys that included the term "Office 2003" from the Windows registry.
    I share my fix with more details and pictures step by step here :
    Link
    Please note that you need to be very careful when manually editing the Windows registry as it may cause problems to your operating system and even cause a massive failure requiring you to re-format your disk.
    Feel free to use my fix at your own risk. I will not be held responsible for any damage caused or data loss.

  • I am installing CS6, for the first time, on a Mac, from a CD.  I have a valid serial number that I just obtained.  When I enter the serial number, it is not validated and I cannot continue.

    I am installing CS6, for the first time, on a Mac, from a CD.  I have a valid serial number that I just obtained.  When I enter the serial number, it is not validated and I cannot continue.

    Error "The serial number is not valid for this product" | Creative Suite

  • During deployment :windows installation cannot continue because a required driver could not be installed

    During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
    a required driver could not be installed".
    Hardware : Gigabyte GA-Q77M-D2H.
    I got image from installation Disc.
    When the error occors this is the event in the admin-log on server 2008R2
    The following WDS Client has encountered Fatal Error: 
    SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
    MAC: 000C29D627F6
    IP: 192.168.208.86
    ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
    Arch: 9
    ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
    What to do?
    Thank you in advance.

    Hi,
    The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
    compatibility issues with a driver.
    Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
    Regards,
    Yolanda
    Yolanda
    TechNet Community Support

  • I tried to reinstall itunes, in the middle of the installing process i get the message "The installer has insufficient priviliges to access this directory:C\ProgramFiles [x86]\iTunes. Installation cannot continue.Log on as Administrator or contact your sy

    I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
    Installer cannot continue.Log on as administrator or contact your system administrator.
    I am the administrator on this HP computer.

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

  • Reinstalling OS9 Classic, You cannot continue, there is nothing to install

    I am using Tiger on an Imac with OS9. I cannot open the OS9 for some reason. I notice in the preference window the OS9 disc logo is missing. Somehow I guess I messed up the software. I found the discs that came with that Imac, and when I tried to reinstall OS9, I got a message saying "You cannot continue, there is nothing to install"
    Any help would be appreciated
    Thank You,
    Bob

    bobfromcovington wrote:
    I have Classic Preference Panes on the harddrive with a Classic.prefpane on it, but when I open it the Classic logo is not there.
    What is Pacifist ?
    Thank You,
    Regards,
    Bob
    You could help us to help you by:
    1 - replying to the correct post
    2 - reading the information at links you are given
    3 - answering questions such as my last one

  • X11: You cannot continue. there is nothing to install.

    Hi,
    My X11 world has started misbehaving - whenever I try to xdisplay something back to my Mac I now get an error message saying 'unable to open display'. This all happened after the X11 session I was having with a remote linux box froze and I had to force quit X11. I thought I'd try to re-install X11 (via X11User.pkg) but I get to the part in the installer where I click on 'Install' and it then responds with:
    You cannot continue. there is nothing to install.
    I've tried removing the /usr/X11R6 directory and the X11 app itself but the installer message persists. Any ideas on how to proceed?
    Thanks.

    Sometimes the reason why these things don't work is that there is a "receipt" in /Library/Receipts that you need to manually delete.
    <pre>
    ls -1d /Library/Receipts/X11
    /Library/Receipts/X11SDK.pkg/
    /Library/Receipts/X11User.pkg/
    </pre>

  • I cannot install apps that are upgraded to ios4.. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    i cannot install apps that are upgraded to ios4. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    I am having the exact same problem with trying to sync my iPad with my computer. To make a long story short, I had to reinstall Windows for my computer and therefore had to reinstall itunes.
    I have done back ups in the past for my ipod touch and other ipods with no problems, but unfortunately I have never been able to back up my iPad. During a sync, the iPad would always disconnect from my computer and it would never finish. it would say the connection was lost, but nothing is wrong with the connection.
    So now I have over 100 apps and thousands of pictures that I am afraid will be deleted if I run the sync in itunes. I have tried to transfer purchases and it goes through the list of apps, but nothing is ever transferred.
    Any help would be appreciated. I am not interested in jailbreaking my iPad to solve this problem. There should be a fix for this and I want to upgrade to ios 4.3 as the original poster. Please help

  • OBIEE 1.1.1.7 upgrade -silent install

    Hi All,
    I am installing OBIEE 1.1.1.7 as an upgrade from version 1.1.1.6 I have upgraded weblogic to version 10.3.6 and used psa.sh to upgrade both schemas,
    I am now trying to run config.sh as a silent install with a response file. I just cant get it to work in with Oracle linix 6.3 it doesnt recognise my paths to WL or Oracle_BI, can a response file be used with a linux installation? Ive tried adding both ' quotes and " around the locations hoping the installer would take them as one string but still no luck,
    See response file
    [ENGINE]
    #DO NOT CHANGE THIS.
    Response File Version=1.0.0.0.0
    [GENERIC]
    #Set this to true if you want to create a new BI System, all other required variables need to be provided. If this is set to true then variables "SCALEOUT_BISYSTEM" and "EXTEND_BISYSTEM" must be set to false, since the variables are mutually exclusive.
    CREATE_BISYSTEM=false
    #Set this to true if you want to scale out an existing BI System, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM","EXTEND_BISYSTEM" and "UPDATE_BIDOMAIN" must be set to false, since the variables are mutually exclusive. In order to scale out an existing BI system, the domain in the system must be running
    SCALEOUT_BISYSTEM=false
    #Set this to true if you want to configure BI System in an existing exmpty domain in the localhost, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM","SCALEOUT_BISYSTEM" and "UPDATE_BIDOMAIN" must be set to false, since the variables are mutually exclusive.
    EXTEND_BISYSTEM=false
    #Set this to true if you want to update an existing BI System running on the localhost, all other required variables need to be provided. If this is set to true then variables "CREATE_BISYSTEM","EXTEND_BISYSTEM" and "SCALEOUT_BISYSTEM" must be set to false, since the variables are mutually exclusive.
    UPDATE_BIDOMAIN=true
    #Write the name of the domain you want to create. Domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
    DOMAIN_NAME=bifoundation_domain
    #Write the name of the cell you want to create. Cell name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
    CELL_NAME=unknown
    #Write the name of the host to which you want to connect. It should have an already existing domain configured.
    DOMAIN_HOSTNAME=localhost
    #Give the port number at which the host should be connected.
    DOMAIN_PORT=7001
    #Give an administrator user name for the domain if you are creating a new one otherwise give the administrator user name for the domain configured at the host.
    ADMIN_USER_NAME=weblogic
    #Give an administrator password for the domain if you are creating a new one otherwise give the administrator password for the domain configured at the host.
    ADMIN_PASSWORD=Velos123
    #Write the administrator password again to confirm.
    ADMIN_CONFIRM_PASSWORD=Velos123
    #Is Single Server Install.
    WLS_SINGLE_SERVER_INSTALL=false
    #Specify the Middleware Home location.
    MW_HOME=/home/OBIEE/MW_HOME
    #Give the name of the Oracle Home directory. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character.
    ORACLE_HOME=/home/OBIEE/MW_HOME/Oracle_BI1
    #Give the complete path to a valid WebLogic Server Home.
    WEBLOGIC_HOME=/home/OBIEE/MW_HOME/wlserver_10.3
    #Give the complete path for a domain home to be created.
    DOMAIN_HOME_PATH=/home/OBIEE/MW_HOME/user_projects/domains/bifoundation_domain
    #Domain Name
    DOMAIN_NAME=bifoundation_domain
    #Give the complete path for JEE applications directory to be created.
    APPLICATIONS_HOME_PATH=unknown
    #Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside.
    INSTANCE_HOME=/home/OBIEE/MW_HOME/instances/instance1
    #Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length.
    INSTANCE_NAME=instance1
    [SYSTEM]
    [APPLICATIONS]
    [RELATIONSHIPS]

    You need the Combo Update to go from 10.7.1 to 10.7.4.

  • Help!  CS4 install - Mac - "Setup has encountered and error and cannot continue"

    Attempting to install CS4 Design Premium on PowerMac G5 with Mac OS 10.4.11
    Install with first DVD and gets about 80% across on the progress bar and it fails with a message "Setup has encountered an error and cannot continue".    Is there an install log created where I could get diagnostic messages to give a hint on what the error is?
    Any insight is totally appreciated!

    The worst telephone support I have ever experienced!   Pathetic.
    The first recommendation posted here in response to my initial inquiry was to contact technical support becaue it is "FREE".   I really suggest that you no longer make recommendations like that.
    The first call I was placed on hold 20 minutes after the technician told me "TWO' minutes.   I hung up the telephone because I could only assume I was placed back in the queue.
    The second call I had to spell my first name, my last name letter by letter to have the technician read it back to me letter by letter from a script, A=APPLE, B=BOY, B=CAT......   he also placed me on hold.   If had to spell my name, and he spell it back to me, how can I explain an error I am having, steps I have taken and have any reasonable expectation of a solution being translated back to me?   I hung up after being placed on hold a second time.
    The third call iced this pathetic excuse for support.    Again, at least six minutes spelling my name.  Another four or five minutes spelling the email address.    Repeating the error code three times, slowly word by word.   This call I endured for fourty minutes.   After the third time on hold I admitted I gave it Adobe's recommended course of support and threw in the towel.
    Understandable that it costs the company less to have this support done for pennies on the dollar overseas, but what about the cost to the customer who is left dead in the water with no faith in getting any help and wastes time and energy?    I guarantee you could have five hundred people lined up for one technical support job in the united states who would stay awake nites to learn and master the program and be pleasant to talk to and give the customer a sense of value!   As it is now, I feel only less than worthless as a customer trying to support this product.
    Can't fix this problem, so going oldschool on it and load a fresh copy of the os.

Maybe you are looking for

  • Problems connecting HDMI to TV

    Hello. I'm expenciering problems when I conncet my MacBook Pro to my TV.After a while, the screen gets negative colours. I just bought a new cable today, and it still happens. My TV is Phillips 32", and it's about 5 years old. I don't know the exact

  • Getting Albums & Large Videos off the iPhone

    I tried to get help from this community to solve my problem only to end up handling it myself. I am not without knowledge however, granted the one thing I cannot post here is the iTunes system file code that prevents having to erase & sync the iPhone

  • Developing Crystal Report from SAP BEx query

    Hi, I am trying to create an crystal report from SAP BEx query( using MDX driver). I can able to connected to BEx query and got key figures and characterstics, but not able to get calculated key figures into crystal reports. Would likes to know how t

  • InDesign Conditional text batch export with TOC update

    Hello Everyone, I'm just getting into the scripting, so bear with me please. I have an indesign document with several conditional text variations and a generated Table Of Contents. I've found -hans-'s batch exporting script which works perfectly, BUT

  • Photo doesn't seem to do albums ?

    hi, i transfer several folders of photos from my LapTop but when the photos are in PHOTO on the iPad they are all in the same Folder/Album, which is a blooming nuisance. how can i make more albums with a folders contents in each ?. To transfer the Ph