Silent Install Exchange 2010 SP2 RU7 Management Tools On Windows 7?
We already have Exchange 2010 SP2 RU7 running on a server. We would like to automate deploying the management tools to the Windows 7 workstations of admins that use the console.
Would a batch file with these commands work when run on a Windows 7 SP1 workstation?
dism /online /enable-feature /featurename:IIS-WebServerRole
dism /online /enable-feature /featurename:IIS-WebServerManagementTools
dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
dism /online /enable-feature /featurename:IIS-Metabase
dism /online /enable-feature /featurename:IIS-LegacySnapIn
Setup /r:MT
How can we deploy the management tools to the workstations with SP2 and RU7 already installed so we don't have to do a separate step of installing the service pack and rollup after doing the base install?
Hi,
First, please make sure the Windows 7 version is 64-bit version. When you create a batch file, you should specify the shared Exchange setup file, you can refer to the following thread.
http://social.technet.microsoft.com/Forums/en-US/e3023a7f-dd70-44c5-94c8-528d8eb1a8a1/silent-install-of-exchange-2010-mangement-tools-sp2?forum=mdt
After you have installed Exchange Management Tool on Windows 7, please always ensure you install any Exchange Service Pack which is the same with Exchange server on the PC running EMC.
Best regards,
Belinda
Belinda Ma
TechNet Community Support
Similar Messages
-
Hey TechNet
So today at about 10:00 am the exchange server dropped all connectivity (except for ping) and was not accessible by RDP and I could not connect to the service control panel etc. (from a remote machine). In addition I could not log on to the console, when
I pressed ctrl+alt+del - nothing happened. (This is running on VMware and I was not able to to use the VMware tools to restart the server either) it had to be "reset" in the console.
I found numerous errors in the event viewer as you might suspect, namely that the server could not locate any domain controllers, global catalogs etc. Of course all the mailbox databases failed over to the other dag member and no one noticed (so
that worked well).
In checking some settings, I have determined that the servers memory page file is not set to RAM+10MB, but it was never set anyways, in addition
static RPC ports are not set. The client was doing mailbox moves today (I am going to confirm with the client again to make sure)
My question to you is this: will not setting static RPC ports cause port exhaustion? and if so can you provide a link that says as much?
Thanks,
Robert
RobertRhoderick,
Thanks for the response. I reviewed several different links regarding this especially some of the ones related to memory exhaustion I didn't see RADAR events in the event log. Here is a short list of some of the events that I have seen in the event viewer.
ESE, 490 (Time Occurred: 9:47 am), several instances.
Information Store (5524) db-7: An attempt to open the file "V:\Program Files\Microsoft\Exchange Server\V14\Mailbox\database\E0E.chk" for read / write access failed with system error 1450 (0x000005aa):
"Insufficient system resources exist to complete the requested service. ". The open file operation will fail with
error -1011 (0xfffffc0d).
ESE 906 (Time Occurred 10:00 am), several instances.
Information Store (5524) A significant portion of the database buffer cache has been written out to the system paging file. This may result in severe performance degradation.
See help link for complete details of possible causes.
Resident cache has fallen by 78083 buffers (or 38%) in the last 118 seconds.
Current Total Percent Resident: 16% (124338 of 762960 buffers)
MSExchangeREPL 2170 (Time occurred, 9:51) several instances.
A slow file IO operation was encountered on file 'V:\Program Files\Microsoft\Exchange Server\V14\Mailbox\database7\E0E000BB30C.log' for copy 'db-7\CBEXCH1'. The observed latency was 9737.6786
ms while performing a 'MissingFileNotification'. This may indicate an overloaded system or a storage-related problem.
MSExchagneADaccess 2070, (Time Occurred, 9:56 am) several instances.
Process Microsoft.Exchange.EdgeSyncSvc.exe (PID=2864). Exchange Active Directory Provider lost contact with domain controller dc.contoso.local. Error was 0x51 (ServerDown) (Active
directory response: The LDAP server is unavailable.). Exchange Active Directory Provider will attempt to reconnect with this domain controller when it is reachable.
MSExchangeADaccess 2122, (Time Occurred 9:57) Several Instances.
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=164). Error 0x8007267c occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain
contoso.local
The query was for the SRV record for _ldap._tcp.dc._dc.contoso.local
For information about correcting this problem, Type in the command line:
hh tcpip.chm::/sag_DNS_tro_dcLocator_messageA.htm
While I do understand that the to really nail this down we would need to setup a data capture set using as you suggested perfmon, and probably (prodump, netmon, etc) I was trying to get the client an answer.
I do have 2 perfmon collectors from last week and the week before,
to be clear these captures were not taken when issues occurred; they show some memory pressure on 1 or 2 counters with some high spikes, but in most cases all the averages (with the exception of 2 counters) are completely below the thresholds.
All captures were done for 4 hours @ 15 secs.
Page Reads/Sec, has an average of 19.433 with a max of 909.51, There are about 10 spikes over 100
Pages Input/Sec, Shows an Average of 132.981, Max, 6,695 (I realize the max is bad), I see 13 Instance's of this counter spiking above 1,000.
Pages Output/Sec, Shows An average of 38.113, Max, 5,221 (I realize the max is bad here), I see about 8 instances of spikes over 1,000.
Systemcache Resident Bytes remains stable with very minor increases over the entire capture.
Pool non paged bytes, is stable across the entire capture as well (Stable, meaning straight line)
Working Set for Store.exe, stable, straight line almost no changes.
Working set for Total, Stable, Straight line almost no changes.
% Committed Bytes in use is at 60%, stable across the whole capture.
This server does not have its page file set to RAM+10MB its set to Dynamically grow. My plan (before yesterday) was to set the page file correctly, then recapture and see if there were any differences. My problem that I have experienced here is that none
of the counters seem to correlate, or if they do its not really a complete correlation that tells me what's going on.
Thanks for your help here!!
Robert
Robert -
Installing Exchange 2010 on Server 2008 R2 Get error with Hub Transport Role
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
install-MsiPackage `
-PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
-LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
-PropertyValues ("ALLUSERS=1") `
-UpdatesDir $RoleUpdatesDir
" was run: "Installing product D:\Program Files\Microsoft SQL Server\Microsoft\Exchange Server\V14\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.".
Installing product D:\Program Files\Microsoft SQL Server\Microsoft\Exchange Server\V14\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
Fatal error during installation
Elapsed Time: 00:00:01
Client Access Role
CancelledHi,
From the description, I recommend you copy the Exchange installation files to the local machine, or download a fresh copy of Exchange 2010 and then reinstall it.
Besides, please ensure that you install Exchange 2010 on 64-bit edition of Windows Server 2008 R2 Standard with SP1 or Windows Server 2008 R2 Enterprise with SP1.
If the issue persists, please refer to the following KB further troubleshooting.
You receive error 1603 when you try to install the Exchange Server 2010 RU1
https://support.microsoft.com/kb/981474
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Exchange Server 2010 with SP3 Management Tools
Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote Powershell, this service must be running. Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx -
Error 1603 when installing Rollup 4 for Exchange 2010 SP2
Hi There,
I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems. However I have hit a problem with my 4th server.
I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
I have tried the following without success:
Turning off UAC
Running from elevated CMD prompt
Running from elevated Powershell command
Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
Re-downloading the RU4 install package to the local disk on the server
Adding more RAM and CPU resources
I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
but then all of a sudden just begins "Rolling back actions".
The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
to do so, could this have anything to do with it?
I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
I am running out of ideas so any help would be greatly appreciated.skippy-85,
Any updates on this Issues?
In case if the issue stands
resolved, Please mark Solution for this Thread and close this.
In case if you still have
the issue with the RU4 installation do let us know!
Thanks
Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!! -
Upgrade Exchange 2010 SP2 to SP3 getting fail
Hi,
I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
Preparing Exchange Setup
Copying Setup Files COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Organization Checks
FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
Language Pack Checks
COMPLETED
Hub Transport Role Checks FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
Client Access Role Checks FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Thanks,
SanHi,
Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
on domain controller holding schema master role.
Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2010 sp2 emc initialization error using "kerberos" authentication failed
We use exchange 2010 SP2.
We have 2 management stations, both w2k8 R2 SP1.
I have one mangement station on which the emc and ems works ok.
On the other management staiton (which is also in another ad site) the emc and ems don't work.
I get the following error message : The attempt to connect to
http://fqdnCasServer/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
I have checked the time on the management station and on the exchange server and this is ok.
It is not a permissions issue because the user functions ok on the other management station.
On the bad management station I can open the emc once and after a minute I get an error message and the message access denied. From then on I can't connect any more.
What am I doing wrong?
Anyone any tips?
Thanks,
JBThis is what I get in the eventlog of the bad management station.
Log Name: MSExchange Management
Source: MSExchange CmdletLogs
Date: 1/10/2012 11:39:27
Event ID: 6
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: Server.domain.com
Description:
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-ExchangeServer
{Identity=Servername}
Domain/ou/ou/ou/ou/username
Exchange Management Console-Local
3080
22
00:00:00.3593888
View Entire Forest: 'True', Configuration Domain Controller: 'FQDN DC', Preferred Global Catalog: 'FQDN DC', Preferred Domain Controllers: '{ FQDN DN }'
Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'FQDN MGMTSTATION' couldn't be found on 'FQDN DC'.
Context
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange CmdletLogs" />
<EventID Qualifiers="49152">6</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-10-01T09:39:27.000000000Z" />
<EventRecordID>11</EventRecordID>
<Channel>MSExchange Management</Channel>
<Computer>FQDN MGMT STATION</Computer>
<Security />
</System>
<EventData>
<Data>Get-ExchangeServer</Data>
<Data>{Identity=MGMT STATION}</Data>
<Data>domain/ou/ou/ou/ou/username</Data>
<Data>
</Data>
<Data>
</Data>
<Data>Exchange Management Console-Local</Data>
<Data>3080</Data>
<Data>
</Data>
<Data>22</Data>
<Data>00:00:00.3593888</Data>
<Data>View Entire Forest: 'True', Configuration Domain Controller: 'FQDN DC', Preferred Global Catalog: 'FQDN DC', Preferred Domain Controllers: '{ FQDN DC }'</Data>
<Data>Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'FQDN MGMT STATION' couldn't be found on 'FQDN DC'.</Data>
<Data>Context</Data>
<Data>
</Data>
</EventData>
</Event> -
Exchange 2010 SP2 Upgradation in DR site
Hi All,
I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
:\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
Welcome to Microsoft Exchange Server 2010 Unattended Setup
Preparing Exchange Setup
Copying Setup Files COMPLETED
The following server roles will be upgraded
Languages
Hub Transport Role
Client Access Role
Management Tools
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Organization Checks
FAILED
Setup needs to contact the Active Directory schema master but this computer
is not in the same Active Directory site as the schema master (Default-First-Si
te-Name).
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
Language Pack Checks
COMPLETED
Hub Transport Role Checks FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
Client Access Role Checks FAILED
Setup encountered a problem while validating the state of Active Directory:
Exchange organization-level objects have been created but have not yet replicat
ed to the local domain. Wait for replication to complete and then run setup aga
in.
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
Exchange Server setup encountered an error.
Please let me know if you have optionsHi All,
I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
But, still i am not able to upgrade the server. The error says,
:\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
Hi,
If you run Get-OrganizationConfig | fl Name,objectversion in your DR-Site, what is the version number you see?
If its not 14247, the schema has not been upgraded.
/Hosting is not supported with SP2, so you need to leave that out.
It might be better if you post in the forum
Exchange 2010 for Hosters
Some additional reading:
Future of /Hosting Mode
Martina Miskovic -
Exchange 2010 SP2, Update Rollup 7
Our setup before we applied Rollup 7:
Exchange 2010, SP2 Update Rollup 6 running on all servers.
2 Mailbox servers w/ DAG
3 CAS/HUB Servers using a hardware load balancer
No problems prior to the Rollup 7 installation.
The Rollup went fine on 4 out of the 5 Exchange Servers. On the 5th server, however, there are problems. The first time I tried to install RU7 it was about 5 hours in when I cancelled it. So I tried again and the install has been running for 13
hours and it appears to be only about 40% complete. The progress bar has been stuck in the same spot for nearly all of that time. Per an article I found on Susan Bradley site (SBS Diva) I had verified that "Check for publisher's certificate revocation"
was disabled in IE prior to the start of the install.
I have seen Service Packs take a long time in the past and I have Rollup Updates take a long time too, but this is taking a very long time.
Anyone else observing this issue with this latest Update Rollup for Exch10, SP2?
Thanks.Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks -
Installation of Exchange Management Tools on Windows Server 2008
Can I Install Exchange 2003 System Management Tool on Windows Server 2008?
Hi,
Exchange 2003 System Management Tool is not supported on Windows Server 2008 as well. As a workaround, you can install it on Windows XP. Here is a helpful article for your reference.
Exchange Server and Windows Server 2008
http://blogs.technet.com/b/exchange/archive/2007/08/16/3403679.aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2
Hi,
We are planning cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2.
Requesting you to please help us out for below scenario.
Source Exchange 2010 SP2:- abc.com
2AD, 2CAS & 2 MBX servers
Database:- 4
Total Users :- 3500
Accepted Domains :- 8
Total Data:- 5TB +
Target Exchange 2010 SP2:- xyz.com
Resource allocated same as above.
Now we have to migrate users along with data to target forest xyz.com keeping both setup live, as moving 5TB + data will be a ongoing process and the same will take some time.
With the guidelines mentioned in
http://careexchange.in/cross-forest-migration-guide-exchange-2010-to-exchange-2010/#comment-14203 we are able to migrate test users along with data, but after migration the migrated user is not able to connect through MS Outlook even not able to login into
OWA. It gives error “The Outlook Web App address
https://mail.abc.com/owa is out of date.”
Kindly let us know how to solve this issue.
Kindly let me know if you want any more information from our end.
Thanks in advance.
Thanks and Regards, Shashank KudiHi Shashank,
Do you have certificates properly installed and configured in the target Exchange?
If not, Please configure certificate and import the certificate to the trusted root CA if you are using internal CA cert.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Cannot install Exchange 2010 on Win Server 2k8R2
I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
Unable to access the 'Default Web Site' on this computer.
I have checked in Server Manager and IIS is definitely installed.
I opened the IIS Manager, and from there I *can* browse to the Default Web site.
For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
Any help is greatly appreciated.
Thanks
James.Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing...
Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
Set-Service NetTcpPortSharing -StartupType Automatic
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
Exchange 2010 RC: Quick Installation Guide
http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
Thanks a lot!
I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
Ruud van Strijp
Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP. -
Exchange 2010 SP2 UR8 Build number
After upgrading to Exchange 2010 SP2 UR8 from SP2 UR6 the build number shows 14.02.0387.000 instead of
14.2.390.3 as detailed in MS documentation. Is this expected behavior?Yes, that is expected.
AdminDisplayVersion doesn't change when a rollup is installed.
Dude, where's my rollup?
http://blogs.technet.com/b/exchange/archive/2010/03/08/3409469.aspx
Martina Miskovic -
Error installing Exchange 2010 on Server 2012 R2
I have the immense displeasure of trying to install Exchange 2010 (migrating from 2003) onto our new Server 2012 R2 server. I get to the install screen when I get this error immediately upon pressing the "Install" button:
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema0.ldf")
" was run: "The system cannot find the file specified".
The system cannot find the file specified
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Unfortunately there is NO help on the Microsoft site about this error so I have NO clue how to fix this or what file is missing. What do I do next? I'd like to get this installed and running over this weekend. Can anyone shed light on this problem? It's
2012 R2, just patched the 15 updates that it found BEFORE installing (or attempting I should say) Exchange 2010.Hi,
The support version of Operating system for Exchange 2010 is as follows
64-bit edition of Windows Server 2008 Standard with Service Pack 2 (SP2)
64-bit edition of Windows Server 2008 Enterprise with SP2
64-bit edition of Windows Server 2008 R2 Standard with SP1
64-bit edition of Windows Server 2008 R2 Enterprise with SP1
Windows Server 2008 Datacenter RTM or later
Windows Server 2008 R2 Datacenter RTM or later
Windows Server 2012 (Requires Exchange 2010 SP3 or later)
Officially Ms not announced to have Exchange 2010 in Windows Server 2012 R2. Check it out the service pack you are using in Exchange server 2010.
Try to download new iso image from the Microsoft Volume licensing page or from download site..may the image can be corrupted.
Ref: http://technet.microsoft.com/en-us/library/aa996719(EXCHG.141).aspx
Exchange Queries -
After upgrading a laptop from Outlook 2010 to 2013 it can no longer connect to our Exchange 2010 SP2 environment. OWA works, Outlook 2010 works, but Outlook 2013 will not create a profile via AutoDiscover. The first two checks go, the last check
Log On To server will not.
We can take the laptop to a different network and it works fine with Outlook 2013.
What is different with Outlook 2013 where it will not connect.
Jason MeyerDoes it work when we recreate a new Outlook profile?
At this point, We high recommand that we run Microsoft Connectivity Analyzer Tool from the folloing link to check what was happening
https://testconnectivity.microsoft.com/
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]
Maybe you are looking for
-
Synchronizing multiple user accounts on the same computer
We bought a .mac family pack. Synchronizing 3 computers works great. But we cannot synchronize our 5 family member's multiple user accounts on the brand new iMac G5. Can it be true that synchronizing does not work between different user accounts on t
-
Restoration gone wrong!
-
hello so today i changed my Apple mouse batteries and now it disconnects by itself all the time and it's annoying me alot! what is the problem here?
-
How to make Microsoft.VSTS.TCM.Steps reportable ?
Hi, I am creating a report using report builder and I need to drill down report of test execution. I would need Steps counts of test case. For that I need to mark Microsoft.VSTS.TCM.Steps reportable. But when we try to upload that to server, we get e
-
TS4006 can you look up your iphone 5 with out having set up your account in icloud?
can you look up your iphone5 without having to set up your icloud? and disconnecting your phone after it got stolen?