Simcity 4 on intel macs?

I was just wondering whether there is a patch available yet for Simcity 4 on intel macs. I was told in the Apple shop that there would be one released soon but I'm not sure where to look. I really want to get this game but not until I know it's going to be compatible.
Thanks in advance.

Hi TvLizard.
I've found this is the best place to look for updates on universal binary games.
http://guides.macrumors.com/UniversalBinaryGames
Unfortunately it doesn't look like a patch is ready for SimCity 4 yet.
Rachel

Similar Messages

  • Simcity 4 on intel mac

    Hi. I bought Simcity 4 for my intel mac and can't find a serial number on the case or anywhere. Is this normal for the Aspyr games? Not sure how essential it is to register the game but I just wanted to register on the site. I looked on the CD, on and inside the case and manual and there's nothing there. Has anyone else found this?
    Also I was told in the Apple shop there should be a patch for it but I can't find anything anywhere. The game seems to run ok but I thought I should install it anyway if there is one. I'm guessing I might need a serial number to install this though too.
    Thanks in advance for any help.

    I was trying to register it on the Simcity website so I can download stuff for the game. I had a look at the Aspyr website and it does ask for a serial number when registering. There doesn't seem to be a patch and the game seems to run ok so I suppose I don't really need to register.
    Thanks for answering

  • Intel Mac Mini stuck in reboot loop

    I just upgraded the hard drive in my 2007 intel mac mini core duo. Drive formatted successfully, contains GUID Partition Table.
    OSX 10.5 installed successfully.
    Machine rebooted, I ran software update to 10.5.7 successfully.
    Upon installing Adobe Flash Player, Adobe Acrobat Reader, machine began to react slowly to commands.
    Rebooted machine, went to Grey Apple Screen with spinning dash wheen icon.
    Machine rebooted itself, once again going to the grey apply screen with the spinning wheel.
    After about 15 minutes of letting the continual reboot cycle happen, I inserted the installation DVD for 10.5, held the power button in to power off the machine, and booted from the disk.
    I ran disk utility. Disk Utility shows the hard drive, shows the partition (GUID Partition) correctly.
    I Verified Disk, which verified as "OK"
    Repaired permissions.
    Restarted machine.
    Once again, it loaded to the grey apple screen, stayed there with the spinning dash wheel for about 3 minutes then continued to reboot over and over (everytime it reboots it sticks on the grey apple screen for 3 minutes before rebooting.
    I once again powered off the machine and reset the PRAM.
    Machine stuck again on reboot cycle.
    I powered off the machine and reset the mini's SMC.
    Machine is still stuck in reboot cycle.
    I have also taken the mini back apart and verified that all RAM and connections are seated properly.
    Any advice on what to do at this point will be very helpful.

    +And I promise I will not download and install a hundred different programs this time.+
    Good idea.
    Any time you install software in OSX, there is a small, but finite, chance that the installation process won't be able to access a needed file because it is in use. This can mess up pre-binding, or even prevent files from being updated.
    So the best advice is not to run any other programs while doing software installs or updates. And when in doubt, run DiskUtility afterwards and fix permissions one more time.
    I cringe whenever I think of a post I read a while back about a Mac user who boasted about what music he likes to run in iTunes while doing system software updates. Not a good idea. It's "Russian roulette" with maybe 99 blanks in the "gun", but one real bullet that can kill your Mac's installation.

  • Installation problems on Intel Mac. claims PPC

    I'm trying to install the current Flash Player 10.2 on my Macbook 6,1 (Intel Core 2 Duo, 2.26GHz) with 4GB RAM, running OSX 10.6.6
    Browser is Firefox 3.6.13 {Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13}
    I got the installer from http://get.adobe.com/flashplayer/
    The installer puts up a message: "Devices with PowerPC processors are no longer supported"
    How can I convince the installer that this isn't a PPC machine ?  Why might the installer think so ?

    Hi, What browser are you using to try to Uninstall/Install FP vs 10.2? And when you Install 10.1, what browser are you using?
    There is no Flash Player support for a 64bit browser. I have been very busy on the Forum and have not had time to check on the 10.3 beta. Not sure what it refers to. Have you? Just asking as I've seen it mentioned on another thread, but it's from those complaining about 10.2 not working. Why anyone would want a beta Installed unless they are involved in the testing and are Developers I don't know.
    Any beta is a work in progress, so as long as a user is aware of that it's ok with me. Microsoft has their IE9 in beta too, but with an beta one can expect problems.
    Since the 10.2 is not Installing, then I don't think you'd receive any code, do you?
    I'm not as familiar with the Mac, but is it possible to upgrade the OS from a PPC to the edition you have now?
    I'm going to check a couple of things while you let me know on the above browser info. Also any comments would be welcome:-)
    Thanks,
    eidnolb

  • Bluetooth Not Available on Intel Mac mini

    I keep losing the Bluetooth wireless connection between my Apple wireless mouse and keyboard and my Intel Mac mini (which is running Mac OSX 10.5.5)
    Tried re-booting but it doesn't always come back.
    Looked in System Preferences, but if the connection is lost, Bluetooth has disappeared as if not installed. If the connection is present then all seems OK. You can check battery levels etc.
    Left to itself Bluetooth can re-appear sometime later as mysteriously as it disappeared, maybe after half an hour or so. Very annoying as I have to result to using an Apple USB mouse and keyboard when the connection is lost.
    Tried running Bluetooth Updater but it says I haven't got Bluetooth if the connection is lost! But it came pre-installed on purchase. Problem only seems to have started since upgrading to Leopard. Never had this problem with Tiger.
    Any thoughts would be most welcome.
    regards,
    BJ

    Ok, I've resolved this on my machine, at least for the time being.
    Here is what I did. I am not advising anyone else to do this and I am in-no-way stating this will fix your problem. I'm just relaying what worked for me. If anyone chooses to try this then it's on their own head!
    I opened my Mac Mini and located the Bluetooth circuit board just in front of the rear power button. I removed the small phillips screw holding the board in place and noticed that the connector that connects the board to the main motherboard was not seated well. I removed the connector and reattached it, making sure I felt the 'click' as the connector was pushed home.
    I had also read on the net that the routing of the bluetooth ariel cable may cause problems due to interference from the USB ports. I took the opportunity to extract the ariel and run it over the disk and away from the USB ports. Before putting the lid back on I booted up to check Bluetooth was working again.
    So, I now have my Mac Mini with Bluetooth working again. We shall see how long this lasts - perhaps the root cause was a loose connection, in which case it may be fixed permanently now. I shall report back in a few weeks.
    Be aware that opening your Mac is going to invalidate any warranty. Mine was out of warranty anyway so I was not bothered. I've also got a degree in software and electronic engineering so know my way round the insides of computers. Please make your own assessment of your level of expertise before deciding to try what I did. It may not work for you anyway!

  • Text-wrap problem ID CS3 on Intel Mac

    I've recently been upgraded to an Intel Mac workstation running Leopard and for the most part, the transition has been smooth.  However, I just noticed today that I cannot get "detect edges" to work on a text wrap around an object with a transparent background in a placed Photoshop file.  The detect edges only works if I have a white background.  I've never had this problem before, so I wonder if it's a result of my new computer.  I use this function of text wrap constantly, and I'm hoping someone knows if this is a known bug and if there is a work around.

    You don´t have to use detect edges feature for extracted PSD-image.... just select a proper Contour Options Type, Alpha Channel for instance.

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    /var/audit/current
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    exit
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • Can I use OS9 as the start up disk on my Intel Mac?

    I have a new Intel iMac. I want to partition my hard drive, install OS9 and run the old system. I know I can't use "classic" on 10.4.7 but I wonder if I could simply install OS9 and reboot my computer. I don't need to move between the two, meaning I don't need to work in OS9 then instantly click and be in 10.4.7. I can deal with the inconvenience of rebooting.
    I'm having 3 problems
    #1, I have an old version of Photoshop. I'll buy the newest Photoshop someday but the latest version wasn't made for Intel Macs and it is very expensive. $600. I wonder if it runs slow on Intel Macs. Maybe I should wait for the next version.
    #2 I have a great Epson printer (875 DC) but Epson has not updated the print drivers for this model and probably won't. OK fine I can buy a newer better photo printer $550.
    #3 I have a "Nikon Coolscan 4000" film Scanner $1,300. This scanner is great in OS9 but the thing never worked in OS10 and now that I have this Intel iMac I downloaded the latest software update and the thing still doesn’t work and if the computer sleeps while the Nikon software is open it won't wake up and I have to restart.
    To sum everything up, can I run OS9 on my Intel iMac? I don't care if I have to work in OS9 then shut down and restart to work in 10.4.7 Can this Intel iMac understand OS9. If I try to restart using OS9 as the startup disk will I damage the computer? Will I screw things up and have to spend hours and days removing files and correcting problems?
    I feel like this computer is a fresh clean new baby and I'm afraid that if I start messing around with it I'll regret it.

    Hello,
    I have a new Intel iMac. I want to partition my hard
    drive, install OS9 and run the old system. I know I
    can't use "classic" on 10.4.7 but I wonder if I could
    simply install OS9 and reboot my computer.
    The problem here, is that the OS 9 environment / Operating System will only run on a PowerPC processor.
    The only reason that OS X will run on either processor, is that it was specifically designed to do so from the beginning.
    But, OS 9 and older were specifically written for the PowerPC / Motorola processors.
    So, you will need a machine with a PowerPC processor to run OS 9.
    Currently, there is one program that will enable OS 9 to run on an Intel Mac. But, it requires making a copy of the Power Macintosh ROM. So, it's legal use is questionable at best.
    http://www.gibix.net/projects/sheepshaver/
    This program works by emulating the PowerPC processor. And, it is reported to operate at roughly 1/8-th of native speeds. So, it could be pretty slow for productive photo work.
    #1, I have an old version of Photoshop. I'll buy the
    newest Photoshop someday but the latest version
    wasn't made for Intel Macs and it is very expensive.
    $600. I wonder if it runs slow on Intel Macs. Maybe I
    should wait for the next version.
    If it is a Mac OS X version, then it will run on the Intel systems. But, yes it will be slower. Usable, but slower.
    I haven't tried this program, so I cannot personally comment on it. But, even Steve Jobs admitted it was slow on the Intel Macs.
    #2 I have a great Epson printer (875 DC) but Epson
    has not updated the print drivers for this model and
    probably won't. OK fine I can buy a newer better
    photo printer $550.
    OS X comes with drivers for the Epson Stylus Photo 875. They are provided by the Gimp-Print layer. But, installed / select just like any other printer. So, as long as you can connect the printer using USB, then you can select the driver for the 875 and be fine (as long as this is the same printer).
    Otherwise, some people have reportedly installed PowerPC print drivers without trouble. I haven't tried it myself.
    #3 I have a "Nikon Coolscan 4000" film Scanner
    $1,300. This scanner is great in OS9 but the thing
    never worked in OS10 and now that I have this Intel
    iMac I downloaded the latest software update and the
    thing still doesn’t work and if the computer sleeps
    while the Nikon software is open it won't wake up and
    I have to restart.
    Can't really help you there.
    To sum everything up, can I run OS9 on my Intel iMac?
    I don't care if I have to work in OS9 then shut down
    and restart to work in 10.4.7 Can this Intel iMac
    understand OS9. If I try to restart using OS9 as the
    startup disk will I damage the computer? Will I screw
    things up and have to spend hours and days removing
    files and correcting problems?
    As mentioned above, the only method currently available to use OS 9 on an Intel system is that SheepShaver program.
    But, I would not expect good results with it for your uses. And, it's legal status would be questionable since you need to copy a ROM file from another Mac to use it (which goes against Apple's license agreement).
    I feel like this computer is a fresh clean new baby
    and I'm afraid that if I start messing around with it
    I'll regret it.
    Just make sure you have a good backup of everything before you start experimenting.
    I hope this helps.

  • Intel Mac mini and widescreen TV output (analog)

    I just replaced my 1.25 GHz mini with a dual-core Intel one, and are really disappointed that the wide-screen resolution options are nowhere to be found. I'm using the Apple DVI-to-Video adapter with an S-Video cable.
    On the G4 Mac mini, I would get 640x480 (NTSC 4:3), 800x480 (NTSC 16:9), 768x576 (PAL 4:3) and 1024x576 (PAL 16:9). Together with Overscan and Best for Video, I got a really nice picture on my 16:9 CRT TV (can display PAL and NTSC in either 4:3 or 16:9).
    With the Intel Mac mini, I only get 640x480.
    (The other available resolutions do not match with the actual NTSC or PAL frequencies or aspect ratios. For example, 720x480 or 720x576 is used as the pixel format for some digital media, but the pixels are not square, and so far, all software expects display pixels to be square. So it's actually quite useless.)
    Is there a trick to get those resolutions to show up in Displays and become usable?

    1.) I am using either 1920x1080 (interlaced) which is the resultion that has the worst problem with text sharpness. Now, I have discovered the Zoom feature in OSX and I can use it to some degree to make things readable. This may be my best option.
    2.) I have done the calibraton and it does look quite a bit better. Those the DVD output is good but not great.
    3.) Apparently, from what I have read, this is a common problem. Maybe a driver upgrade from Apple or Intel could fix?
    I bought a Philips DVI cable. I know it's not the best but it should suffice. Monster cables seem to be overpriced. I plan to hook my PC to my HDTV with the same cable. My ATi card supports HD resolutions as well.
    I also hooked the mini to my CRT that I have on my Dell and it looks very good there. I am impressed that OSX adjusts the resoltions that it can display upon boot. Even which switching displays.
    Intel Mini Duo Core Mac OS X (10.4.5) 512MB RAM

  • Need Advice: New Intel Mac Mini Still In The Box

    Hi!
    Okay.. I know... I have several posts going here as I have several issues I am trying to solve rather simultaneously. Thanks for being patient with me.
    I have my old 1.25 Ghz PowerPC Mac Mini running 10.4.11 and all was well and happy. Then Security Update 2007-009 happened and all went to ....well... you know and, yes, it was bad! Went to Apple, got it running of sorts as they re-installed the OS, but they used an old version of OS X. (10.4.7. Can you believe that?) This caused other problems. It continues to have all sorts of difficulties, as I have had to get applications to re-recognize that the computer is back up to 10.4.11. Currently, I am struggling with trying to get iTunes to access it's music folders on the external hard drives. Realized that I hadn't even gotten around to figuring out whether or not some of my other applications work, like some of the games and third party, etc.
    The thing is I got a new Intel Mac Mini for Christmas and it's still in the box because as I suspected I need to get my old mac perfect again before I can even think about migrating stuff over to the new Mac. But.. here's the thing... it's starting to look pretty much like 2008 will come and go before I can get the old Mac ready enough to take the new Mac out of the box. This really is rather silly!
    Now... I can't get the old Mac to see the music and it made me think. I have all of my iTunes music and iPhoto backed up on an external hard drive (I used Apple's "Back-up" software to do it) and in addition to this two complete copies of the iTunes music and iPhoto photos albums on two separate external hard drives. Should I just forget using migration assistant? Can I get my music and my photo albums into the new mac directly from the external hard drives?
    Or...can I use "back up" to restore the music and photos into the new Mac?
    I am starting to think that the best way to get my new Mac running is not risk it by attaching it to my old Mac. What do you think?
    Thank you so much for any advice or experiences you can give. -Charlotte

    I know that I am vacillating back and forth as to what to do. Thanks so much for being patient with me. All of your advice is really appreciated and I am at least closing in on deciding on my strategy. Probably will follow your first response advice, especially considering that some of the third party apps may not have updates to handle Leopard quite yet. Anyway... it's a good strategy since everything is on the externals anyway.
    You can say that fine.
    Ha ha ha.... yes, I've been messing around with computers since my parents bought our first Apple computer back in 1979. Just like you, I've never had a serious problem with any of the computers and we've had them all, running all sorts of things from the Original Apple and Apple IIc (which my parents still have and it still runs!) to the Commodore and all the Windows permeations and then on to the Macs running Jaguar, Panther and Tiger, probably because we've always been careful with the machines and what we install in them and how we update them. I have always kept my computers on UPS' and un-plug them when storms brew outside. As it is I am still using my eight year old Windows 98 computer, (for games mostly) and it still runs quicker than most peoples windows pcs and it's only a 740 Megahertz.
    I haven't had to re-install anything, especially on this lovely little Mac Mini until now and wouldn't have in this situation, had I known more. I had taken the little Mac Mini in for a Procare "Tune-Up," only four days before the big up-date disaster. Not sure what they did to my mac in the tune-up but the guy gave me back the machine assuring me that the computer was perfect with no problems in answer to my asking "were they sure?" Even after the Genius Bar techs at the Apple Store re-installed the OS to fix the big problems it seems that no one ever thought to run verify disk. Had the Genius Bar techs at the time of the tune-up done this, or at least told me to do this, the last security update would not have wrecked so much havoc. It was only after I got the machine back from Apple that second time that I found that the directory had been corrupted when I ran disk verify. Actually it is amazing that I have had this little Mac Mini for so long and so not have had any problems on it that I would be able to go so long without having to know this really pretty important aspect of keeping one's mac in good running shape. I had been running maintenance scripts and permissions verify and repair and thought that was all there was to it. Silly! You know... that really is a testimony of how nice these little machines are.
    Anyway... experience is a good teacher and I have learned so much it's actually been great! This stuff is pretty interesting.
    Now... on to Leopard!
    Thanks so much and you have a great New Year! -Charlotte

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • I did it! Opened Intel Mac all by myself!

    Hello,
    For a girl, I like to think I'm a little tech savy. I like gadgets just like most guys. I have recently picked up a Intel Mac Mini and was kinda itching to crack it open to see what kind of trouble I could get into. (Hopefully none of course)
    Its my 3rd day with this new toy and I found it running very slow just surfing and thought maybe if I put a bit more ram in it, it might help. However, I only had an old 512 and turns out to be the wrong kind (ddr333). But I cracked open the case none the less just to torture myself!!!!
    All I can say is it was EASY as pie to open the case. I used a spatual, kind of rectangular, about 1.5 to 2 inches wide (didn't measure it) it was pretty flimsy and very thin and looked like it would do the job. I had on hand the tools that came with a replacement battery for the Ipod MIni. Futureshop had installed it and gave back the tools for me to keep. The plastic thingy used to pry open the Ipod Mini helped a bit to wedge the Mac Mini when I went to the other side, so all in all it took less than a minute to open the case. It actually looks hard and scary but isn't at all.
    I fretted about the antenna and checked the web abit ....just squeeze the 2 black thingys under the antenna together and it will pop up..but don't let it fly off, there's a spring under the antenna so be careful. The antenna is attached to a wire, so don't pull away..just lay it over the side for now and and remember its there so as to not rip it off the wires.
    Next step that was a bit tricky was getting this wire attached to a small plastic thing at the front off. Sorry can't really explain what it is but it needs to be popped off from where it is attached. I used my Ipod plastic tool to help wedge it upwards bit by bit to get it off. It is a very tight spot and even my little fingers got in the way. That took a few minutes.
    Now the part I hated the most was removing the screws. 3 are the same size and the 4th is longer. Make sure you place the mac mini a certain way when removing the screws so as to not mix them up. I place the screws in the way they were removed and made sure the mini was facing the same way when putting the screws back in. Not really rocket science but helps.
    Okay, what I didn't like about the screws is it was a bit tricky to get them out as they were not out in the open except for one. The screws are very tiny..my "00" screwdriver didn't work well but the tools from the Ipod Mini did come in handy..I used the screwdriver to remove the screws . (glad I had it) You need to be careful not to drop them in the hole when screwing the back in.
    Once all the screws were off and the little plastic connector removed, you can now gently lift up this top half where the harddrive is housed. When lifting, watch for the brownish cable that is attached on one side, it is attached to the top and bottom halves. You need to lean to top half over towards the brown cable so not rip it off. Also this is where the antenna is hanging over, so watch out you don't rip the antenna off at this stage too.
    To change the ram is just like changing ram on your laptop. Same clippy things.
    I checked the ram and yes, my old ram is not compatible so I'm S.O.L. and have to re-open this baby tomorrow as I'll be running out to get some.
    So when closing up the Mini, I gingerly flipped the top part back over and watched out for the antenna. Put the antenna back on by squeezing the black thingys again and it snapped into place nicely. No big there.
    Fussed a teeny bit to line up the holes. Put the plastic wire connector thingy back in at the front...it was tricky again as the space is so small to work in. Once I felt the top portion lined up, I carefully put the screws back in....praying that they didn't fall off into the unit. That would really pee me off as I would have to probably turn it upside down to get the screw out!?!? But all was well!
    Lastly, put the case back on. First gently placing it on and lining it up as there is a metal thingy at the back end and make sure no wires are hanging out. Once I thought everything looked okay, I had to tap each corner down until the case went into place completely. Viola!!! All for not!!!
    Hopefully everything will be fine tomorrow when I do it all over again. If I can do it..so can you!!!
    Enjoy all!

    Sal,
    No.
    1. The actual text of the warranty and the applicable law* govern, not the manual. For the armchair lawyers who bring up e) in the warranty: The burden of proof of damage caused is still on Apple.
    2. Reread the manual: It does not and cannot legally say that opening the case voids the warranty.
    Even though the manual says that there are no user upgradable parts, it doesn't change Apple's obligations under the warranty or take away your rights under federal (and New York state) statutes.
    One thing to keep in mind: Anything you install and anything you break because you did so are not covered by warranty. If you don't know what you're doing, you should stay out of the guts of your computer.
    -Wayne
    *I linked to the actual text of the applicable federal statute and interpretation of that statute by the federal agency that is charged with enforcing it.

  • Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

    Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
    I can't figure out how to get this to work. Is it possible?

    WildBull wrote:
    Will it work if I connect via usb instead of firewire?
    No. There is no "USB Target Disk Mode".
    Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

  • Using External Boot Drive with New Intel Mac Mini

    I have a 1st Gen MacMini and use an external 7200 RPM Lacie drive as the system boot drive along with all the applications.
    If I were to purchase a new Intel Mac Mini, is it possible to use the current external drive as the system drive or is there some conversion steps that would be necessary ?
    Thank you.

    You can use the hardware, but will have to repartition and reinstall the OS from the disk shipped with the new Mac Mini.
    http://docs.info.apple.com/article.html?artnum=303220
    If you create a disk image of the Lacie on your Mini, you can later use setup assistant to restore users and applications from that image.

  • Flash Player 10.2.153.1 upgrade not working on 64bit Intel-Mac in Safari 5.0.4

    I feel robbed! I want to use my Safari.
    The latest upgrade of Flash player does not work.
    I don't even remember downloading it, it must've been an automatic update!
    I can not play youtube videos nor can I play any games on Facebook.
    Who knows what is not working in my Avid!! I have not been working on that lately.
    The flash player still works on FireFox, but i have no intention on switching to that.
    The first aid has been run a few times.
    It will download the free flash player for Intel Mac and it says the install is successful, but it is not there.
    I have CS4 and it never bothered or disrupted the free flash player before.
    I uninstalled it just in case and nearly lost it! When I tried to reinstall Flash, it said my disc to was blank!
    Luckily, a friend in the business of fixing computers was able to get that back! whew.
    The flash player from the CS4 is showing up in a folder and will even open when clicked on, but it does nothing. It is version 10.0 r2.
    When I go to the place where they say to "see what version of flash you have"
    I just get that icon that says to "Get Adobe Flash player".
    It down not show the suggested "missing plug-in" pictures.
    Yes, I read there is compatibility issues with the 64 bit Mac, but it always worked before!!!
    Help!! Please!!

    So the Shockwave Flash plugin in FF is Installed and Enabled. That's why Flash Player is working and why you were able to see the Flash Player logo animation. On the other hand, evidently the Shockwave Flash plugin is either not Installed in Safari or if it is it is Disabled. And that is why it's not working and you can't see the Flash Player logo.
    Yes, I know Flash Player can be Installed in any supported 64bit OS. Also I thot that the 64bit browser in Mac was the "default" browser and the "Compatibility layer" had to be used. Similiar to the PC IE8 or IE9, switching over to the Compatibility feature in the browser.
    Do you need to activate the Compatibility feature?  I have had other Mac users tell me that their problem was they were using the 64bit browser and found out they had to use the 32bit browser, so I thot it was something they had to do. I would think if it was automatic they would not have had to "do" anything. But like I said I don't use Mac so can only relate what they tell me.
    With Safari on either of the test sites, no Flash Player version was displayed?
    Look into the HD/Library/Internet Plug-ins/ directory and see if you have the below two files:
    Flash Player.plugin, flashplayer.xpt
    After that see if this thread is of any help: http://forums.adobe.com/message/2725949#2725949
    Thanks,
    eidnolb

Maybe you are looking for