Similar to Drop Frames? Is it? Anyone else with this issue?
I am using a G4 with FCP HD. Lately when I try to export to my DV Deck, 20 minutes in the frame freezes and the audio keeps going. It doesn't give me a dropped frame error, but it seems like a dropped frame. What get's me is that I exported the file to a self contained quick time movie to avoid the drop frame issue yet it's getting choked up anyway. Any suggestions, comments? A fix would be great!
Potentially a corrupt render? You might try exporting a self contained quicktime and sending that to tape. Having all the media in a single stream can make for better reliability.
Also, is there a chance that some of the renders were made to the system drive? Are you within 10% of filling the external drive? Could it be some kind of conflict on the FW bus?
Patrick
Similar Messages
-
Desktop restart shows flickering black/white screen, then black. Could not restart. Anyone else with this issue?
Have the PRAM battery looked at. It may be all that is needed.
-
Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD displayafter going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support
-
After 10.10.3 update I can no longer right click. Anyone else with this issue?
After updating to the latest software I am unable to right click on my magic mouse like before. Now I have to use control and click. Anyone else with this issue?
Did you check the settings in Mouse preferences?
Download and install the OS X Yosemite 10.10.3 Combo Update. -
Own two iphone 5s with ios 7.0.2 loaded. Both phones do not allow camera video to start. Anyone else with this issue? Any suggestions how to correct?
Hello markittwo,
Thank you for details about the issue you are experiencing with recording video after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhones:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
If you are still seeing the same issue after quitting and relaunching the Camera app, I recommend restarting your phones and then resetting if recording video still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhones:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Phone won't charge when I plug it in. Anyone else with this issue?
Not sure if this has anything to do with the new download, but Thursday I downloaded the '08 updates (yeah...I am slow getting to it), anyway... while I was downloading the updates, my phone of course was charging from the computer. After the download was finished I turned my phone off and plugged the phone into the wall charger. Charged fine... well last night (Saturday) I had to recharge my phone, but once I connected my phone to the wall charger it would not respond and/or start charging. Tried to plug it into the computer and it said my USB port was overloaded. I was ticked... needless to say I tried again this morning with no luck. Left my phone off for a few hours still nothing. Called tech. support and the guy asked me to try it again on the computer and read what the error said to him.....low and behold it started charging... on the pc and then on the wall charger. I have no idea why it started to work. I was happy it did, but has anyone else had this issue?
Odd problem, but there are all kinds of problems with the wall chargers. If you want a new one, make an appointment with your local Genius Bar at the apple store, bring in your misfunctioning one, and they will swap it out for a new one. They do this routinely for charging bricks, sync cords, and headphones.
-
Safari 5.0.6 repeatedly refreshing back a page - can't find anyone else with this issue.
I have already searched for this issue, and no one mentions anything quite like it. There are plenty of threads about refreshing problems, but not like the one I'm having.
For quite awhile now, the same problem has been occurring: I will be on a web page and suddenly safari will refresh and bounce back to a prior page - anything I was doing at the moment disappears (such as filling out a form, writing an email, etc) and I have to start from the beginning. Even things like what I'm typying right now could refresh and disappear at any moment - it's driving me nuts!
Has anyone else had this problem, or heard of it, and what was the recommended solution?
Thanks in advance for your help!Ok..
You can also try troubleshooting the Safari .plist (preferences)
Go to ~/Library/Preferences. Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Quit then relaunch Safari to test. If that helped, move the .plist file to the Trash.
~ (Tilde) character represents your Home folder.
If it's not Extensions nor corrupted preferences, possibly a third party Safari addon.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues -
My phone made an outgoing call on its own anyone else with this issue?
My iphone made an outgoing call somehow on its own which is impossible since i have password protected and my phone was on me at the time. There was no way i pocket dialed or someone else called because it was in my hand. Doesn't make sense! Has this happend to anyone else?
Odd problem, but there are all kinds of problems with the wall chargers. If you want a new one, make an appointment with your local Genius Bar at the apple store, bring in your misfunctioning one, and they will swap it out for a new one. They do this routinely for charging bricks, sync cords, and headphones.
-
I recently updated to the newest version of Flash (17.0.0.134) and I have a MacBook Air, running OS X and I have Safari version 8.0.4. Ever since the update I can no longer select drop down menus or get Netflix to run properly. Has anyone else had this issue/know how to resolve it?
1. System Preferences > Flash Player > Advanced > Delete All
Press “Delete All” button under “Browsing Data and Settings”.
2. Install Adobe Flash Player.
System Preferences > Flash Player > Updates
Press the “Check Now” button.
http://get.adobe.com/flashplayer/
Download it and quit Safari from Safari menu in the menu bar.
Follow the prompts to install Adobe Flash Player. -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?
First, select sender(s) as VIPs. Then the VIP category will appear.
To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left). -
Safari 5.1.7 keeps crashing (log points to Rapport) on my Mac OS X (10.7.4) Has anyone else having this issue with Trusteer Rapport?
Hello Mr. Jelfs,
Please note that Rapport is fully compatible with Mac OS Leopard, Snow Leopard and Lion.
We operate a 24\7, free of charge support team that will gladly answer any and all your questions and queries, and would be happy to assist with any problem reported.
We can be reached either via email to [email protected] , or by browsing to http://www.trusteer.com/support/report-problem .
Regards,
The Trusteer Technical Support team. -
Today, my iPhone calendar entries are changing from green to blue and back to green again. Anyone else having this issue?
No, never had the problem.
-
My RDIO app no longer works on my iPad. Does anyone else have this issue?
My RDIO app is not working on my iPad since they did an update. Does anyone else have this issue?
Hi klucas54,
Thanks for visiting Apple Support Communities.
If the RDIO app is not working after the app was updated, start with the helpful troubleshooting tips in this article:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Best Regards,
Jeremy -
"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.
Hi, I also get the message "itunes could not restore the iphone because the password was incorrect" though I am never prompted to enter a password anywhere! Nor was the backup password encrypted to begin with! Really strange, any pointers will be greatly appriciated!
Maybe you are looking for
-
Time Machine Question: How does it handle external drives?
Hi, To date, I have only been backing up my HD (macbook pro) though Time Machine onto a dedicated back-up external drive. Today, I backed-up and forgot that my 2nd external drive (for music) was plugged into my Macbook. So, Time Machine seems to be b
-
dear gurus yesterday i faced a problem with material stock valuation with ref. to that i got on replay ple check map program ple tell me about that tahnk u prakash
-
I Know, this is stupid, but how do I add a scanner?
I'm a new convert to Apple. Please be gentle. I knew how to add peripherals with Windows, but I feel like a child now with this iMac. I just need to "add hardware." Am I missing something? I just want to add a scanner...
-
Are there any free windows 7 video/movie editing programs that are compatible with .mov files in HD from the iPhone 4?
-
Extremely annoying ads constantly popping up EVERYWHERE on Safari, please help!
I recently tried downloading a movie off the internet for the first time and obviously made a very stupid mistake. I download songs quite regularly, but after trying to download a movie problems immediately started arising. It's almost as if everythi