Simple Recycling Bin??
simple ?? where is the recycling bin in Itunes??? Help
No, there is no recycling bin in iTunes. The recycling bin in part of your Windows computer.
Similar Messages
-
On deleting an item, "Name" column of recycle bin is updating with data in one of the custom column instead of title field in SP 2013 Custom list.
Thanks, ChinnuHi,
According to your post, my understanding is that you want to update title field in recycle bin with other field value of the item.
We can use the ItemDeleting Event Receiver to achieve it.
While item is deleting, replace title field value with other field value using ItemDeleting event receiver, then in the recycle bin, the title value will replace with other field value.
However, there is an issue while restore the item from the recycle bin, the item title would be replaced.
As an workaround, we can create a helper field in the list to store the title field value while deleting, then replace back while restoring using
ItemAdded Event Receiver.
I have made a simple code demo below to achieve this scenario, it works like a charm(the
Test2 field is the helper field, you can hide it in the list), you can refer to it.
public override void ItemDeleting(SPItemEventProperties properties)
properties.ListItem["Test2"]=properties.ListItem["Title"];
properties.ListItem["Title"]=properties.ListItem["Test1"];
properties.ListItem.Update();
base.ItemDeleting(properties);
/// <summary>
/// An item was added.
/// </summary>
public override void ItemAdded(SPItemEventProperties properties)
base.ItemAdded(properties);
properties.ListItem["Title"] = properties.ListItem["Test2"];
properties.ListItem.Update();
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Accessing the Recycle Bin via Windows Explorer
I run a no-icon desktop and have noticed in the RC that I can not seem to access the Recycle Bin via Windows Explorer as has previously been the case. Thus making it, in my experience so far, impossible to empty the Recycle Bin without turning on Desktop Icons to do it, and then turning them off again when finished.
I have found a work-around that is quite simple to setup, add a Favourates Shortcut to Windows Explorer, but I wondering with there is a setting somewhere now that needs activating/deactivating to have Windows Explorer show the Recycle Bin as one the the items in the Navigation Panel under Computer?When the Recycle Bin is visible on the Desktop, left-click and drag the icon image to the TaskBar near the Start button. If you have Aero, you'll see a message "Pin to Windows Explorer".
Then open Windows Explorer and you'll see the Recycle Bin on the DeskTop from the left column.
Now you can opt to not display the Desktop Icon. Contol Panel>Appearance and Personalization> Personalization and select >Change Desktop Icons>Uncheck Recycle Bin.
Work for you?
After doing the above, I then opened Windows Explorer, and used the organize tab. I then selected "the show all folders" option, selected ok. The Recycle Bin now appears in the left Navigation Pane and the Icon is not visble on the desktop. I believe it is because I pinned it to win explorer by dragging it to the taskbar that it appears there. -
I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.
Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2 -
Recycle bin option disapeared when deleting a file from iTunes library?
Problem : files deleted from my iTunes Windows library are not deleted on my hard drive.
how to get back to the full "delete" features in iTunes library where you are asked if you want to put the files in the recycle bin or not? By mistake I 've ticked the option " don't ask again"
thx
iTunes 10.5.1.42OK I did follow the sequence but i still have only 1 msg instead of 2
1/are you sure you want to delete the selected song from your iTunes library
AND NOT THE SECOND
2/ REMOVE TO RECYCLE BIN -
Delete songs from itunes library, no option to keep file or move to recycle bin
iTunes Version 11.0.1.12
I just finished moving my library to a different drive and all seemed to be fine until I started cleaning out some duplicate songs. When I delete a song from the library, it does not ask if you want to keep the file or move to the recycle bin. Only 1 window comes up asking - Are you sure you want to delete the selected song?.....and there are only 2 choices - Delete Song or Cancel. "Do not ask me again" still shows in the window with the box.
In Preferences under Advanced, the path shows - G:\iTunes\iTunes Media\iTunes Music.
I checked for other references to this but could not locate.
Would certainly appreciate some help - thanksI have this question too - Help tells me option is there but it's not
-
Enable Recycle Bin on mapped network drives
A few years ago I discovered how redirected user profile folders in Windows get Recycle Bin protection, even when the folders are redirected to a network location. This was a huge find for me, and I used this feature to add Recycle Bin coverage to some of
my mapped network drives. I shared this information on another forum here:
http://forums.mydigitallife.info/threads/16974-Tip-Network-Recycle-bin
Today I figured out a better way to achieve the same goal that doesn't rely on user profile folder redirection, and am sharing that information for other users to try out. You might want to take a look at these forum topics for additional information:
http://technet.microsoft.com/en-us/library/cc787939(v=ws.10).aspx
http://blogs.technet.com/b/askds/archive/2012/07/16/managing-the-recycle-bin-with-redirected-folders-with-vista-or-windows-7.aspx
http://msdn.microsoft.com/en-us/library/bb882665.aspx
http://social.technet.microsoft.com/Forums/windowsserver/en-US/10bfcfb9-14f3-434e-9ffa-0289b8b32e01/folder-redirection-recycle-bin
The standard disclaimer applies - this might break stuff. I've only tested in Windows 8, and my testing is limited. Try this at your own risk.
This is what I've learned (or think I've learned - I might be wrong):
Windows Vista and later store the configuration settings for the Recycle Bin for redirected user profile folders in this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\BitBucket\KnownFolder
Under this key are separate keys for each redirected folder that is protected by the Recycle Bin. The keys contain the configuration information for each protected folder, and are named to match the GUIDs for "Known Folders." A list of the Known
Folder to GUID mappings is available in one of the links above.
The registry also contains a list of "known folders" at this location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions
So, I reasoned that if I could create my own custom "known folder," I could add that to the list of folders that were protected by the Recycle Bin and protect any mapped network drive I wanted. So I looked at the list of existing "known folders"
and created a key that was similar to the Documents key. I then fiddled with the values in the key until I narrowed it down to the minimum number needed to make the recycle bin work.
This .reg file will protect a mapped X: drive with a ~50GB recycle bin. You should modify the file to fit your needs:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\{9147E464-33A6-48E2-A3C9-361EFD417DEF}]
"RelativePath"="X:\\"
"Category"=dword:00000004
"Name"="XDrive"
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\BitBucket\KnownFolder\{9147E464-33A6-48E2-A3C9-361EFD417DEF}]
"MaxCapacity"=dword:0000c7eb
"NukeOnDelete"=dword:00000000
A few things of note:
The GUID in the above .reg file {9147E464-33A6-48E2-A3C9-361EFD417DEF} came from this PowerShell command: "{"+[guid]::NewGUID().ToString().ToUpper()+"}"
Each "known folder"/Recycle Bin combination requires a unique GUID. If you don't want to use PowerShell to generate a GUID, you can use an online GUID generator.
I don't know what the "Category" value does, but the key I copied had it set to 4, and that works, so I didn't test any other values.
The "Name" value is required, but is not the name that will be shown if you right-click on the Recycle Bin and select properties. (At least not in my environment.) In my environment, the name that is shown is the name of the network drive.
Making this change adds a "Location" tab to the properties page of your mapped network drives. I suspect this could be removed by changing the "Category" value, but didn't bother to find out.
I only tested with mapped network drives. I suspect this would work with UNC paths as well, but I didn't bother testing.
I hope you're as excited to find this as I was to figure it out. Let me know if this works for you. I now plan to deploy the registry keys with Group Policy Preferences and will update this forum post with any information I discover.
Best regards
--Russel
Update: I am now using Group Policy Preferences to deploy the needed registry keys, and all my mapped network drives are now protected by the recycle bin.
Update 2: I have tested now with UNC paths, and this works fine. I still use mapped network drives, but if your environment requires UNC paths instead, you can use them. Note however that if you have a mapped network drive that points to a UNC path, and
you protect the UNC path with a registry change, if a user deletes a file from the mapped network drive that points to that UNC path, the file will be permanently deleted. See below for more details.FANTASTIC work Russel !
This is extremely helpful.
I've turned your work into a Bat Script that will automatically make the reg file.
It creates a unique guid each time it is run, so no worries on overlaps.
Just copy and paste the following into notepad
and save it as "Network Recycling Bin - auto make registry file.bat"
echo off
REM ========== MAIN FUNCTION ========================
Call :CreateREGfile
PAUSE
goto :eof
REM ========== SUB FUNCTIONS ========================
:CreateREGfile
set /p RelativePath=Enter
current mapped path of drive (e.g. X:\FileShare\D_Drive):
REM replace \ with \\ (for reg value its a requirement)
Set RelativePath=%RelativePath:\=\\%
set /p MaxBinSize_Dec=Enter
max size (in mb) (eg 11gb=11000):
call :toHex
%MaxBinSize_Dec% MaxBinSize_Hex
Set outputREG="Network
Recycling Bin - %RelativePath:~0,1% Drive (%MaxBinSize_Dec%mb).reg"
call :MakeGUID_VBS NewGUID
REM echo My new GUID : %NewGUID%
echo Windows Registry Editor Version 5.00
>
%outputREG%
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\%NewGUID%]
>>
%outputREG%
echo "RelativePath"="%RelativePath%"
>>
%outputREG%
echo "Category"=dword:00000004
>>
%outputREG%
echo "Name"="NetworkDrive2RecyclingBin_%NewGUID:~1,5%"
>>
%outputREG%
REM The "Name" value is required, but is not the name that will be shown if you right-click on the Recycle Bin and select properties. That will be autoset to the network drive name.
echo.>>
%outputREG%
echo [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\BitBucket\KnownFolder\%NewGUID%]
>>
%outputREG%
echo "MaxCapacity"=dword:%MaxBinSize_Hex%
>>
%outputREG%
echo "NukeOnDelete"=dword:00000000
>>
%outputREG%
goto :eof
:MakeGUID_VBS
echo set obj
= CreateObject("Scriptlet.TypeLib")
> TEMP_generateGUID.vbs
echo WScript.Echo obj.GUID
>> TEMP_generateGUID.vbs
FOR /F "usebackq tokens=*"
%%rin (`CSCRIPT "TEMP_generateGUID.vbs"`)DO
SET RESULT=%%r
set
%1=%RESULT%
del TEMP_generateGUID.vbs
goto :eof
:toDec
:: todec hex dec -- convert a hexadecimal number to decimal
:: -- hex [in] - hexadecimal number to convert
:: -- dec [out,opt] - variable to store the converted decimal number in
SETLOCAL
set /a dec=0x%~1
( ENDLOCAL & REM RETURN VALUES
IF "%~2"
NEQ "" (SET %~2=%dec%)ELSE
ECHO.%dec%
EXIT /b
:toHex
:: eg call :toHex dec hex -- convert a decimal number to hexadecimal, i.e. -20 to FFFFFFEC or 26 to 0000001A
:: -- dec [in] - decimal number to convert
:: -- hex [out,opt] - variable to store the converted hexadecimal number in
::Thanks to 'dbenham' dostips forum users who inspired to improve this function
:$created 20091203 :$changed 20110330 :$categories Arithmetic,Encoding
:$source http://www.dostips.com
SETLOCAL ENABLEDELAYEDEXPANSION
set /a dec=%~1
set "hex="
set "map=0123456789ABCDEF"
for /L
%%Nin (1,1,8)do
set /a "d=dec&15,dec>>=4"
for
%%Din (!d!)do
set "hex=!map:~%%D,1!!hex!"
rem !!!! REMOVE LEADING ZEROS by activating the next line, e.g. will return 1A instead of 0000001A
rem for /f "tokens=* delims=0" %%A in ("%hex%") do set "hex=%%A"&if not defined hex set "hex=0"
( ENDLOCAL & REM RETURN VALUES
IF "%~2"
NEQ "" (SET %~2=%hex%)ELSE
ECHO.%hex%
EXIT /b
:eof -
I downloaded an Adobe file from my email (service provider is MWeb) but now cannot find it on my hard drive and it's not in the recycle bin. It does, however, appear in Firefox downloads but I'm unable to open it from there. How can I recover the file?
Thanks Rob.
I actually had no clue what the core problem was caused by. So it's Windows itself...that helps some.
I'll resubmit there. It might actually have saved time for it to simply have been moved to there instead of off-topic, though I suppose you have to follow protocol. -
I just accidentally wiped out my entire music library. I sent everything to recycling bin and then immediately hit restore all items as I knew what I had just done. Now I can find where those files went. Is there anyway Apple can just send me my purchased songs again?
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519 -
Deleted items not going to recycle bin.
Whenever I delete something from my iTunes library, I get the popup asking if I want to move it to the recycle bin or leave the file on the computer, and I always click on the button to move it to the recycle bin.
And it never does. It just leaves everything in the hard drive.
Since I watch a daily vlog as a video podcast, this can add up to some serious hard drive space wasted in short order.
I've drilled down to the folder for that in my iTunes folder, and sure enough there was the last episode I had just removed.
It'll be a major pain to sort through and delete the items I've removed, but not the ones I'm saving, and am wondering if there is a way to fix iTunes to work properly, like it did on my old Mac, rather than having to navigate my way through the iTunes folder every time I don't want to save something I've just played the one time I downloaded it for.Hello klep:
I have seen this before but, of course, I do not remember the solution.
Try a couple of things:
Run permission repair.
Restart your computer (if you have not already done so).
Trash the finder preference file (com.apple.finder.plist) and restart.
Barry -
Recycle bin to show all deleted items on the site collection for specific user group
hi there, is there any way where a certain sharepoint group (i.e. site collection members) to view and restore deleted items on theentire collection, without giving them site collection rights orgive them more rights than necessary? we wanted to create
aSP group that has the permission to restore deleted items and give them to selected users so that our users won't have to contact us when they want to restore a deleted itemI don't believe you can. If an item get's deleted it should go to the first recycle bin @ /_layouts/15/RecycleBin.aspx
The Recycle Bin gives a site collection administrator
greater control when users delete files, versions of files, list items, libraries, lists, and folders from a SharePoint site by providing a second stage safety net before an item is permanently deleted from a site. When a user deletes an item from the Recycle
Bin, the item is sent to a second stage Recycle Bin (also known as the Site Collection Recycle Bin) that the site collection administrator manages. This article focuses on how a site collection administrator can manage the Recycle Bin for a site collection.
https://support.office.com/en-US/Article/Manage-the-Recycle-Bin-of-a-SharePoint-site-collection-5fa924ee-16d7-487b-9a0a-021b9062d14b
Ibrahim Sukari, Technical Consultant | SharePoint | Dynamics CRM |
LinkedIn Profile -
How to delete the items in the recycle bin permanently from the windows using Diruse command
How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an exampleYou can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
I cant download onto my computer an episode I purchased because when I hit download it says that the disk I am attempting to tranfer to is full.....however iy had no problem down loading another show....(Jon Stuart) So I went to my library where I see my shows stored and deleted MANY and when I tried again to download ---I got the same message to full......I tried to empty the recycle bin on my desktop thinking it was holding too much but the choice to empty is not darkened so it will not empty....can ANYONE help?
Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
Here is how to do this:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab below the icons
Click Erase
The "Quick Erase" option will only take a moment or two
Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes -
I'm editing a band by deleting songs I do not like on iTunes on my PC. When I believe I'm deleting a song it ends up deleting ALL of the songs by that band (this is after I've deleted many individual songs sucessfully)! This has happened twice since the new version of iTunes. The first time I tried to restore the songs from my recycle bin but they just vanished when I tried to restore them. The second time (today) the songs were not even in the recycle bin. Has this happened to anyone else out there? I have to now relocate all of those cd's and then reinstall them and go through them and put songs back onto various playlists (I have a lot of them). Hassle!!!
Time you backed up so you can recover in the event of a crisis.
tt2 -
Hey can someone help???
I just completed this task (support.apple.com/kb/HT1364) moving my music to an external HD to free up my PC hard disc and all went well until I re-opened iTunes and it is a blank new account!
I also don't can't access anything from the recycle bin as when I copied the iTunes file to the recycle bin it said it was too large to copy over so made me effectively empty as I copied over as it was so big.
Any help gratefully recieved or where I can get some, I am going round in circles. I also don't know which itunes operating system I have, it is around 3 years old.hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo
Maybe you are looking for
-
Iphoto has lost connection with its folder
Hello, One day I turned on my mac, opened iPhoto and found it empty. I've read various threads and know not to be alarmed as I can see the folder of my pics is still there. I am however having trouble re-connecting iPhoto to this folder. In the past
-
After downloading latest iTunes 12 I cant open iTunes window says not installed correctly please re- install error 7 ( windows 5 ) PLEASE HELP
-
When sync ipod error message "new wave sound not copied, because not found
I just upgraded to 7.0 and after I download music to my library I get a message stating the following "new wave sound" was not copied to the ipod because it could not be found. I looked on apple support for this plug but no luck. Please help.
-
HT1711 I have a song on my phone. How do I save it as a ringtone?
I have a song on my phone. How do I save it as a Ringtone?
-
Hiya, First off...sorry I couldn't be more specific in the subject line of this post, but my questions are kind of long and wouldn't fit. Secondly...well, not counting any experience I've got with iPods, I do have some experience with Apple's compute