SimplePass and FingerPrint Reader not working - Win 7Pro 64Bit

I have a Envy DV7-7212nr which has been running flawlessly with Windows 7Pro for the past two years. Fingerprint reader and SimplePass has been working fine. Last week I downloaded from the HP support site for this notebook the updated SimplePass. After removing all passwords from the account, uninstalling the old software and driver and updating with the HP software, it quit working to the point where I couldn't even log in to my computer. I finally got in under administrator and had to manually remove and uninstall the SimplePass software and edit its entries out of the registry.
I can now get back into my laptop fine (no password protection). Following the advice of the HP Tech via chat session I again ninstalled the driver listed under Biometrics and uninstalled the software and downloaded the SimplePass from the HP Support site with upgrades listed for this machine. The Tech took over the machine and tried installing and re-installing and then finally said it was a hardware issue. I don't believe it's a hardware issue in that at the Windows Login Screen, if I swipe my finger, it recognizes the swipe but then gives an error message that there is no fingerprints associated with the reader (or something like that).
If I back out and just login without the reader and launch SimplePass (Authentec Version 6.0 downloaded via HP Service Pak) - 2013-04-05 , Version6.0.100.272, 66.44M - SP61399, the splash screen opens and says DOWNLOADING DATABASE - and nothing else happens. It then pops up an error box labeled IESiteLogin.exe with an EXCEPTION ERROR.
White lite on reader never comes on. Driver details says all is working fine.
Repeated un-installs and re-installs have no effect.
I no longer have the original SimplePass and Driver filed so I can't revert back. Can someone please offer a solution or provide a URL that will allow me to download the original SimplePass and Validity drivers so I can get this working again?
HP's download caused the problem - I would think they could fix it.
Thanks in advance.

thx1326,
I am sorry the Driver did not work.
You might try the Hard Reset procedure below to clear the device cache and allow the driver a better chance to set into place.
thx1326 wrote:
Ok... so the validity driver did nothing. Shows fine in device manager - but nothing. If i install SimplePass, as soon as it finishes installing and everytime I try to run it... I get the pop up window above.
Worst of all... don't you think it is deplorable that no one from HP has bothered to offer help?
Their tech support is really almost non existant. The tech support person that called me back today kept trying to say it was all my fault for downgrading to Windows 7 and that they don't support Windows 7 and it was my problem. I finally had to politely ask him to shut up and listen and answer me if they don't support Windows 7, why do they offer driver and software updates for Windows 7 on the support page for this laptop... of course he had no answer for that. Another 30 minutes wasted that I will never get back.
Thanks again for any help.
Commentary
It is always unfortunate when a system does not respond to an Upgrade or Downgrade of the Operating System in the way one hopes.
There is no guarantee that there are Drivers for every model and for every version of the Operating System that one wishes -- changing the Operating System from that of the originally installed version is the responsibility of the owner. Demanding otherwise is futile.
===========================================================================
Driver Options - Windows 7 dv7-7200 series
HP SimplePass Series 6 requries a Validity Driver minimum version: 4.3.0.205
To try a different Driver:
First >> Fully Remove any existing Driver
Windows 8       Windows key + X > M (opens the Device Manager) >
OR
Windows 7       Control Panel > set icon view > Device Manager >
Open category Biometric Devices >
Right-Click on Validity Sensor Driver > Uninstall > in box > Click Delete
Next >> Perform the Hard Reset
Create a Restore Point:   Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
Next >> Install the replacement Driver
Try one of the following drivers:
Validity Sensor Driver sp53369 V4.3.205.0
Validity Sensor sp54484 - V4.3.205.0
Restart / Reboot the system
===========================================================================
Other Option
I suggest you use System Restore to recover the Validity Sensor Driver you must have been using for the past two years running Windows 7 and HP SimplePass version 6.0.100.272.
Restoring Windows to a Previous Point (Windows 7)
===========================================================================
I fully support the good people at the HP Response Center.
I respectfully withdraw at this time and wish you well.
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

Similar Messages

Fingerprint reader not working and cant drag icons after windows 10 update

fingerprint reader not working and cant drag icons after windows 10 update

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! To start, can you please provide me with the Product Number of your notebook? Here is a link you can use that will help you find your Model and Product Number: How Do I Find My Model Number or Product Number? In the meantime, I recommend using the Go back to an earlier build option, in your System Settings:
HP Notebook PCs - Upgrading to Windows 10
Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

FingerPrint reader not working on Google Chrome

The HP Simplepass fingerprint reader is working on IE and Firefox but not on Chrome. Anybody know why?

I have the same issue with the same laptop
I've noticed that whichever driver you try and install, the version always seems stuck at 2.1.0.2

Sound issues; slow response; usb ports unreliable and sd reader not working

The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
Help!!!
Alfriston

Hi again Alfriston,
Thank you for the clarification!
To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link.
If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Fingerprint Reader not working after windows password reset

Hi There
I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
Why finger print is not working after windows password reset? What should I do to login?
Help would be appreciated!!

I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
1. You should change fingerprint while changing windows password. I don't understand the reason behind it, btw is this true?
2. We can't do anything for this issue.

Fingerprint reader not working on elitebook 2540p

I have elitebook 2540p, and I can't get my fingerprint reader to work.
The driver is installed and looks good at device manager.
I installed HP ProtectTools 5.12.754 and I can not see in the credentials area the fingerprint, only the smart card.
I tried also with DigitalPersona software and it's the same.
I have download the last driver from HP website under the correct operating system (Windows 7 enterprise 64bit).
I think the fingerprint reader is working since I entered the Bios and there it worked when I swept my finger. I saw the image of my fingerprint on the screen.
What might be the problem? why HP protect tool can not recognize my fingerprint reader?
Thanks in advance,
Ariel

I have the same issue with the same laptop
I've noticed that whichever driver you try and install, the version always seems stuck at 2.1.0.2

Lenovo T510 (4313CTO) fingerprint reader not working at first login

I have a Lenovo T510 (4313CTO) system that until recently worked just perfectly. After I know not what - I have checked the Windows Update log, etc. - now, when booting, when the system reaches the Windows logon screen, the usual 'Please wait' message is displayed, but after maybe 30s of that, it reads 'No attempt to start this service has been made since the last boot'.
This error only occurs on a fresh boot. When logging out and in again, it works correctly. I use the SSO function, so one finger swipe unlocks the hard drive and should log into Windows. The first BIOS swipe works fine, i.e. it cannot be a hard ware problem.
After a little research, I reckon this 'service' that is not starting is upeksvr.exe, given pg. 66 of this Lenovo CSS document. The particular error message I believe is a Windows system error, no. 1077 given this MSDN article.
After removing all of the Lenovo Fingerprint software and all fingerprint data, upgrading FPRS, downgrading, and having trawled the net for solutions to no avail, I have not had any success. A call to Lenovo yielded no help either (no surprise there...) I would really appreciate any help you can offer, to save me from having to reinstall the system!

I had a similar problem, the first time I occurred after a Windows Update. This time I formatted and made a fresh Windows 7 installation.
The next time the same happened again after I updated the system using the "Lenovo ThinkVantage System Update".
When I tried to open the Fingerprint software directly the following message appeared “The dependency service or group failed to start" and the Error Code E7210001 appeared in details.
This time I discovered in another forum while searching for another problem ( "Devices and Printers" did not load) that the problem was due to one of the services was disabled, the Credential Manager service.
To correct this just type in Start the following: services.exe
Look for the service: Credential Manager
In properties the Startup type should be set to "Automatic"
Press Ok and the next time you restart the computer the Fingerprint reader should work.
Hope this solves your problem.

What would make the webcam,usb and fingerprint reader quit working?

On DV7 6c95dx

Hi jeffriespc,
Thank you for your inquiry, I will be glad to assist you!
I understand that the USB ports,Webcam and Fingerprint reader have stopped working. Have you tried running The HP Support Assistant to look for updated drivers and help resolve issues. Do you have all your Windows updates done?
You can check for hardware failures by running diagnostics. Testing for Hardware Failures (Windows 7, Vista).
If this has not resolved your issue, you can do either a restore back to a known good date or a recovery.
Using Microsoft System Restore (Windows 7)
Performing an HP System Recovery (Windows 7)
If you decide to do the recovery, you will get a prompt to backup your personal files. if you have not done one, I suggest you do it now to prevent data loss. Here is a document to assist you with restoring them.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

USB ports and SD reader not working

For a few days my usb ports and SD reader stop working, I tried, Doing a SMC Reset and a PRAM reset I also reinstall my operating system but non of then have worked any advice would be greatly appreciated.

iMac 21.5-inch, Mid 2011(OX 10.8.5).
I call the repair shop and they told me it would coast $2000 to get it fix, they told me that my mother board was burn, so I send them an email telling them if my mother board was burn wouldnt be able to use my imac. I could get a new one for that price.

Fingerprint reader not working in IE and saying failed to connect to sensor

Hi all,
I bought a Qosmio x500 10t a couple of months back. For the first couple of weeks i had no probs using the fingerprint reader to log in to windows and to log in to websites in Internet exploer.
All of a sudden it would not work on any website stored. The green banner showed accross the top of site and asked to swipe finger but nothing happened when I swiped. I rebooted and it worked again but not for long before failing. This time a reboot didnt work so i deleted my finger prints and websites and started from scratch. That worked for a couple of attempts before probs started again. And on trying to get into Fingerprint utility it says failure to connect to sensor. So, I did a system restore. It worked for a couple of times again and then same probs. So I found the updated utility software, uninstalled the old and put on the new. Same again, worked for a couple of times then failed.
I could not find anything stuck in the registry but to be on the safe side i did a full system clean back to factory setup using backup discs. Hey presto i thought it had worked. Everything going ok for first 24hrs and then same problems start to occur. Only this time it is also prompting me to enroll fingerprints even though i already have. And when i try to get into the utilioty it says failed to read sensor again.
The fingerprint log on to windows always works as long as i dont close the fingerprint utility down before shutting down. If i do exit the utilty i cant reopen it as it just says failed to connect to sensor. And then i have to unistall and reinstall the utility software. Aty the moment it occasionally works on websites stored but most of the time it doesnt do anything.
Please help. Do I need to send laptop back to Toshiba??

Hi,
*I got a solution* for the problem that the fingerprint sensor "suddenly" does not work any more.
When starting the Toshiba Fingerprint Utility, it says "failed to connect to fingerprint sensor".
Is it possible that just before it stopped working there was a new firewall installed, or firewall settings had been changed?
*In my case, the problem was solved by changing my firewall settings* (Windows 7 Firewall Control) to ALLOW all traffic for
the Authentec Fingerprint Sensor Service (AFSS). It is the file "AtService.exe" in C:\Program files
The reason is simple:
The Toshiba Fingerprint utility communicates with the fingerprint sensor service via TCP/IP.
Therefore, any firewall that blocks traffic on the local computer will block the communication.
*After changing my firewall settings, fingerprint sensor works* on my R700 flawlessly now.

Fingerprint Reader Not Working

So I had Avast! on my computer. It was annoying and scanned every file for like 30 seconds with DeepScan. So I uninstalled it. When it uninstalled, it removed my fingerprint reader driver. My computer got really slow and a lot of my apps don't work. I wanna punch the Avast people. It is not a virus because I did not download anything after I uninstalled. I am not that dumb. I tried to reinstall according to people on the forum but it didn't work. Under device manager, I get: http://prntscr.com/3qpb8y
It says "unknown device."
Then, when I go to Control Panel, I get this: http://prntscr.com/3qpbrc
On the login screen, it gives me the option for fingerprint read login, but the light on the fingerprint reader doesn't light up and it won't log in. I even did a system restore to before the uninstall and it still doesn't work. -_- Then, I did HP Recovery Manager and reinstall Validity Sensor and SimplePass. That didn't help either. When I tried to reinstall SimplePass I got an error message. I saved the log. Here is what the log said behalf of the error:
Info 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: InstallDrivers64.7454D9E3_16A7_4545_824B_A965BF57EA5E, location: C:\Windows\DPDrv\, command: C:\Windows\DPDrv\dpinst64.exe /SA /S
CustomAction InstallDPPassFilter_x64.4D0EAAF1_2D33_4FFF_AA08_6F47502DAAA2 returned actual error code 5 (note this may not be 100% accurate if translation happened inside sandbox)
Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action InstallDPPassFilter_x64.4D0EAAF1_2D33_4FFF_AA08_6F47502DAAA2, location: C:\Windows\system32\, command: regsvr32 /i /s dppassfilter.dll
MSI (s) (B8:94) [23:19:15:385]: Product: HP SimplePass Identity Protection -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action InstallDPPassFilter_x64.4D0EAAF1_2D33_4FFF_AA08_6F47502DAAA2, location: C:\Windows\system32\, command: regsvr32 /i /s dppassfilter.dll
I have a Pavilion dv7 on Windows 7. It's 64-bit. Here is a screenshot of my system info: http://prntscr.com/3qpcv2
Please help me! My poor PC is screwed!!!
P.S. - NEVER GET AVAST!!!

Help us to help you by posting the following information.
1. The full Model No. and Product No. - see This HP web document if you don't how to locate the model number and\or product number.
2. The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
3. Is your notebook still covered under warranty? Check your warranty status Here.
Check in the BIOS to see if the fingerprint sensor is enabled.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Fingerprint reader not working - HP Pavilion dv7 - Windows 8

I have been working on this for over a year without any results. It is driving me crazy.
My fingerprint reader on my pavilion dv7 is not working. Actually it never worked (or showed any sign of action) since i bought my laptop.
I've tried installing many kind of different drivers and software, updated BIOS etc. Nothing works.
So i decided to call for your help.
Laptop info;
HP Pavilion dv7
Windows 8 64-bit
Bought 1 year ago in The Netherlands
p/n: B1X38EA (#ABH)
Help would be greatly appreciated
Greetings,
Glenn Peters

Hi,
Please refer to the following two documents.
Troubleshooting a Fingerprint Reader (Windows 8): http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c03718240
Using HP SimplePass Fingerprint Reader (Windows 8): http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c03653209
Please follow all the troubleshooting steps and let me know whether it helped.
Please support me by clicking on Kudos and Accepted solution if you like my advice. These are the best ways in which you can thank me.
I am an HP Employee.

Pavilion dv7 fingerprint reader not working

Hi.
My HP Pavilion dv7 fingerprint reader isn't working. I have the SimplePass software that's powered by AuthenTec. When I open the SimplePass software, it doesn't seem like it knows I have a fingerprint reader.
I've tried installing new drivers but I can't seem to get anything to work.
Any help is really appreciated.

lyscarn,
Could be the order in which you are doing things, could be the HP SimplePass version would be happier on a different version, could be that you just need to kick the system (metaphorically speaking).
Assuming you are running Windows 7 or Windows 8 AND that you are not running Digital Persona
then
the following may help.
Find, open, and follow the instructions in the file named: Simple Instructions to Upgrade HP SimplePass
Kind Regards,
Dragon-Fur

Validity Sensors Fingerprint Reader Not Working

Hello,
I am running a Pavilion dv7-6c43cl, and I recently reinstalled Windows 8.1. The fingerprint reader is not working - I tried to configure it through PC Settings and the error was "An error occured processing your fingerprint". I installed drivers from people facing the same issue, as well as the drivers on HP's support page, and it didn't work. I tried uninstalling the driver, and rebooting to see if Windows would fix it - it didn't. I have no idea what to do, please help!
Thanks!

aqua1234
You cannot run ProtectTools on this computer; ProtectTools Security can only be run on a business class system - the dv7 is a consumer notebook. Your dv7 is a nice notebook; it is a different kind of animal from a business class system.
=================================================
Next:
If you managed to install any piece of the ProtectTools program onto the computer, remove it, that is UNINSTALL the program.
After the you uninstall the program from Programs and Features, Shut down the computer to a dead stop (off), boot the computer and log in.
====================================================
Preparation:
You can continue to use the Validity Sensor Driver you have installed now. Should you need to reinstall the Driver and you lose track of it on your computer, you can retrieve a copy from your computer's Support Pages for Windows 8.
Reference:
HP Pavilion dv7-6c43cl Entertainment Notebook PC
====================================================
Next:
Open the file > Click on Download > Click “Open in Adobe Reader”
Instructions to Upgrade HP SimplePass
Read the first page: Dragon Document Guidelines
Next:
Follow the steps in the Section titled:
Procedure - Update / (Re) Install HP SimplePass
NOTES:
You are using HP SimplePass Series 6 >> Ignore references to Series 8
You will be downloading and installing the Series 6 HP SimplePass program from the document.
=================================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Fingerprint Reader not working upon waking from sleep for windows login

Hello,
I have a brand new T540P with a Validity fingerprint reader.
Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows.
Things I have tried
-uninstalling/installing device in device manager and finger print manager pro software
-setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options
-disabling "allow windows to turn off this device to save power" in device manager.
I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue.
Is this a platform wide issue affecting all T540P models? This is frusterating.
Solved!
Go to Solution.

sailoholic
Your report is the first we have ever heard of this issue on T/W. It does not happen on my T/W systems here (with or without 30 Day Standby enabled). The other reports I heard of this problem came from X240.
I just want to confirm with you - the problem happens after coming out of Sleep (and not Hibernate), right?
Can you tell me exactly what you are doing? e.g.
1. Use the computer normally (is AC attached or not?)
2. Close the lid - the computer goes to sleep (or do you go to sleep some other way?)
3. Open the lid 2 hours later (or how long)?
4. are you using a dock?
The more info you can provide, the better. Thanks for your help.
Also please let me know what BIOS version you have.

SimplePass and FingerPrint Reader not working - Win 7Pro 64Bit

Similar Messages

Maybe you are looking for