Sims 2 not working, space not available?

I wanted to uninstall my sims 2 game so that I could reinstall and start over. So I googled how to do that, deleted the EA games folder and sims folder from my hard drive. So I clicked on the Package Installer in the game's folder to install the game again. But it says that I need at least 1 mg free of local disk space. So I removed a bunch of stuff from my dock and deleted folders and it still say I can't install because of lack of space. And I don't have a lot of things saved on my computer, the most I have is my music
What do I need to do?

Hi Hillview,
If you bought 'The Sims 2' for Mac then it will only run on either a PowerPC Mac or an Intel Mac running OS X, not under Windows with BootCamp unfortunately. This means that you can't attempt to run it in "PC" mode. The Apple Store states that the minimum 'Graphics' requirements to run The Sims 2 are either an ATI 9200 and higher, or a GeForce FX5200 and higher. Unfortunately they don't quite take into account that they are shipping macs with Intels integrated graphics chipset now, and no Intel specific requirements are mentioned in the system requirements. It does however state that a minimum of 32MB Graphics Power is required to run the game, and the GMA950 that is in your mac mini has upto 64MB shared, meaning that technically it should run fine.
It must simply be a problem in the way that the Intel graphics chip processes visuals that are specific to the game its self and unfortunately you can't upgrade the Graphics chip inside your mac mini - it's soldered in! A call to the Apple Care Help Line may be your best bet, because the chances of you being able to get it running, aren't really looking all too good unfortunately =(
Hope that I may have been of help
-Pos

Similar Messages

  • HT1766 I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!!  HELP!  iCloud backup/restore did not work

    I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!!  HELP!  iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • HT1766 i am trying to unlock the iphone 4, after backup, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb availabl

    i am trying to unlock the iphone 4, aftermanual backup on the computer, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb available

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • "iTunes could not restore the iPhone because not enough free space is available of the iPhone"??????

    Before updating to iOS6, I backed my iPhone up onto my PC, as I am aware that when updating an iPhone things like notes, contacts etc tend to disappear. However, after the update was complete, when I tried to 'restore back up' I keep getting the message "iTunes could not restore the iPhone because not enough free space is available of the iPhone". I don't understand why this message keeps coming up, because I have 20.96GB free space. All my contacts have gone, and I urgently need them for work. What can I do to solve this problem???

    I suggest you delete some stuff off your phone so free up some memory and try again

  • Storage Spaces -error Location not available.

    I have had Storage spaces running for a couple of weeks. 4 drives 3tb each, same make/model. Have them pooled into a striped "raid 5" setup thru storage spaces.  I travel and do some shift work. I frequently try to get access to them remotely
    and informed that the drive pool is not accessible.  So when I get home I attempt to access it locally with same issue.
    I see my pool (G:) in my drive list, I click on it no problem,  can see 1st directory, and can go into 1 folder.  If I try to do anything in that folder, go to any other folders or attempt to use any files in the root, it sits and waits and looks
    like it is searching. I hear no drives spinning up and after about 2 minutes I get a pop up that says location not accessible.
    In order to access the information, I need to shut computer down and reboot. Not only is this a bother, but sometimes not available remotely.
    Are the drives going to sleep and not waking up?
    Any help on how to fix this would be greatly appreciated.
    Chris

    Hello Chris,
    Do you mean that you use a RAID5 drive to create a storage space, and it worked for weeks and now has the issue about ‘location not accessible’?
    Please share us the whole error message and a screenshot is preferred.
    Based on my test, I can normally create a storage space with 3 VHD. And it work with no accessible issue.
    Please try to change ownership and permission of the drive and check if the issue still exists.
    For more information about taking ownership, please take a look at the following article.
    https://technet.microsoft.com/en-us/library/cc753659.aspx?f=255&MSPPError=-2147217396
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • In Pages 5.2, some fonts "not available", yet present in Font Book and working in other apps

    Using Pages 5.2, I open a document created in a previous version, and I get error messages about certain fonts within a font family being "not available" in OS X.  However, these supposedly unavailable fonts are present in Font Book and work just fine in all other apps running on OS X.  In fact, I still have the older version of Pages on my system, and it still finds the fonts without issue.  The specific fonts troubling me at the moment are Myriad Pro Semibold It and Myriad Pro Cond.  Pages 5.2 replaces them with Helvetica.  I have wasted hours of time trying to resolve this problem, and I am at a total loss.  What can I do?

    Like so many other thing is is probably gone. Why not use Pages 09 that has about 100 features more than Pages 5. If you haven't deleted it it should still be in Applications/iWork 09 folder.

  • My rue la la app for ipad suddenly dosent work so I deleted it now when I try to reinstall it the app store says that it not available in the us. It is still on my Iphone and working properly. What is this all about?

    My rue la la app for ipad stopped working. I deleted the app and tried to reinstall it,  it is no longer available in the app store and when I research it on safari and find it when i try to install it says that it is not available in the us store. What is that all about?

    My app did the exact same thing. It is still unavailable on the App Store and when Rue La La's site directs you to download their app, the "not available in the U.S. message appears. This happened to me last night. The app wasn't working, I deleted it and was just going to reinstall but was unable to find the app. I figured it was some glitch but I have tried multiple times this afternoon to no avail.

  • I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

  • HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

    I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure  if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

  • I have Firefox 5.0.1, and a theme I want to download says that it works with Firefox 4.0b9pre - 7.0a1, but at the top it says that it is not available for my platform. What do I do?

    I just downloaded Firefox 5.0.1, and one of the themes I want to download and try out says that it works with Firefox 4.0b9pre - 7.0a1. At the top, though, it says that the theme is not available for my platform. It has happened with some other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

    It says:
    <blockquote>"Bloomind FT DeepDark 2" is a theme that has been created to transform the look of Firefox 4 for <b>Windows</b> users. It has been specially designed for Seven, but rendering is relatively accurate on XP and Linux (<b>I can t test it on MAC</b>, but for those who would like to try it anyway on that platform, <u>you can force download and install it</u>).</blockquote>
    So try to save that file via the right-click context menu.
    *http://kb.mozillazine.org/Themes

  • My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

    my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
    The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • HT1414 I just got a replacement iPhone 5 (64MB) for one with a cracked face, and tried to restore it.  Got an error message saying the iTunes could not restore the iPhone because not enough free space is available on the iPhone.  Now what?

    I just replaced my iPhone 5 because of a cracked face.  I backed up the old phone to iTunes.  When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone.  Now what?
    I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this.  They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.

    I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!

  • USB port 1 & 3 not working, BT not available

    iMAC 27", Mid 2011
    The USB port 1 & 3 (1 is near the firewire port) are not working, also Bluetooth is not available.
    I try to reset PRAM and SMC but it didnt change the situation.
    When executing Hardware Test (Diagnostics) no errors are found (short and long test). When in the hardware test, all USB ports are working.
    AND afterwards when restarting Mavericks the USB port 3 works again - but when I then unplug the mouse, put it to port 4 and back to port 3 it does not work anymore. (I didn't check if the same happens with port 1).
    Any suggestions how to fix it?
    Thomas

    Unfortunately it doesn't change anything.
    Yesterday I reinstall Mavericks from scratch (erase hard disk and install OS). Now no bluetooth icon appears in the menu bar - even not in system preferences.
    Some further issues I notice but I'm not sure if they are related to the bluetooth issue:
    it takes about 60sec. after a reboot/restart until the apple logo appears and the progress indicator is running
    I found a lot of USB error messages in the logs:$ sudo dmesg | grep USB
    USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    USBF:    6.179    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    USBF:    12.182    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    USBF:    12.215    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0xfa110000)
    USBF:    18.188    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    USBF:    24.191    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    USBF:    24.222    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfa110000)
    USBF:    30.195    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    USBF:    36.200    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    USBF:    36.231    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 2 of Hub at 0xfa110000)
    USBF:    42.205    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
    It seams to me like the internal USB hub is in trouble.
    Unfortunately I can not compare it to a working iMac.
    ThoMo

  • My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

    My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

    I have ALL the exact same symptoms as on my home computer.
    It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

Maybe you are looking for