Simultaneous login problem

Hi
I am having simultaneous login problems. In the past I have been able to sign into my skype account on both my Mac Book Pro and my Windows 7 desktop PC. However since I had to change my password I can only login into one machine at a time now. Also when I change my password on the desktop PC I can only sign into that skype / computer. Whenever I type the same account name and same exact password on my Mac Book Pro, it says it doesn't recognize my sign-in details but I am 100% sure that I typed it in exactly the same way as I did on my desktop. Another is that when I reset my password on my Mac Book those details won't work on the Desktop PC and vice-versa.
I would like to know what is the problem in this situation, I am not sure if this is an application error or a networking error where the account details are not signing in from a different IP or MAC address.
Please and thank you!

"The load balancing was already functional:"
Do you have a description how to do that?
I Would like to know how.
"so ALL traffic, not going to the LAN network and so over this interface, went out on the DMZ interface, with source IP from LAN."
If you put the VPN servers behind 1-1 NAT instead they will use the firewall as GW and the VPN clients will get at your remote sites/LAN IF you add routing definitions in VPN config what networks are reachable through VPN.
Or you keep servers as they are but also add add more routing definitions in VPN AND static routes to each server with the firewall as gw to those remote networks. Default gw will still be through the DMZ IPs though.
The problem with more than one VPN client from behind same IP address is, with your current server settings, most likely because of the client side NAT router isn't coping with the task. Your public IP VPN server(s) should mean NAT VPN problem is at the other end (customer/client network router/firewall).
If two VPN clients behind same NAT router connected to different servers at your end, "12.34.56.80" and "12.34.56.81" (both are public IPs?) respectively I believe at least two should be able to connect.
3G/4G modems isn't an option?
Maybe try bringing your own tested working portable router (ethernet/wifi maybe includes a VPN client that connect to your servers) to the customer and put it temporarily on their LAN? There are these small new 3G/WiFi routers too. Depends on wether you need to be connected to customer LAN or not.
Try other VPN solution, SSL or OpenVPN?
Use both PPTP and L2TP simultaneously (PPTP could be troubelsome if GRE/TCP 1723 passthrough is disabled)?

Similar Messages

Limit # of simultaneous logins?

Is it possible (or even practical) to try to do this?
My client wants *light* security on a series of pages, and
would like to
have two categories of passwords -
1. A single user, i.e., no simultaneous logins.
2. A group user, i.e., multiple simultaneous logins, up to
but not beyond,
some ceiling.
With PHP/MySQL is this feasible?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================

I can't speak for the PHP universe, but principles tend to
translate so I'll
take a shot anyway.
In ASP, you've got session_onstart and session_onend in your
global.asa
file. Obviously, if the user does not log out and just closes
the browser,
the session will remain active until it times out, but
session_onend will
run regardless of how the session is ended. The
session_onstart and
session_onend can be used to edit application variables
(which are truly
global and only fall out of scope when IIS is restarted). The
application
variable might, for instance, be named after the user ID and
contain the
number of current active sessions. Session_onstart is set to
create or
increment; session_onend is used to decrement.
In the case of a user closing the browser, you'd have a login
unavailable
until the session timeout is reached. Typically, explaining
this to users
is good enough and everyone understands that if they make a
mistake (or have
the computer crash or something), they may need to wait 20
minutes before
they're allowed to log in again (assuming you're using the
default 20 minute
timeout). As long as it's known up front and not a nasty
surprise, people
are generally understanding.
I don't think PHP has application variables, but you could do
the same with
a text file or a database table (with the bonus that a
database table can be
used to store session ID, login, logout, etc and give you all
kids of
history info). The crux of the matter is finding out if a PHP
application
has the equivalent of a global.asa and/or session_onstart and
session_onend
event handlers that are handled by the web server and not any
particular web
page. Sorry I can't be of more help there.
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> That was exactly what I told her.
>
> So - how would you approach this problem, then? One
solution is to
> monitor simultaneous logins, and that clearly is
impractical.
>
> How would you enable 'group' access if not this way?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Gary White" <[email protected]> wrote in
message
> news:[email protected]...
>> On Thu, 6 Sep 2007 10:38:10 -0400, "Murray *ACE*"
>> <[email protected]> wrote:
>>
>>>With PHP/MySQL is this feasible?
>>
>>
>> Not really. Because some users may simply close the
browser instead of
>> logging out, you have no reliable method to
determine who or how many
>> may still be logged in.
>>
>> Gary
>
>

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

Web Center app with ADF Security - login problem

I have a custome Oracle Web Center app.
I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
and i get
Error 403--Forbidden
I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
This works fine if i use a Login link with
destination="#{'/adfAuthentication?login=true&end_url=/faces/postLogin.jspx'} "
which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
Edited by: new_to_webcenter on 18-Jan-2011 05:25

Thanks for your response Frank.
The web.xml has
<security-constraint>
<web-resource-collection>
<web-resource-name>adfAuthentication</web-resource-name>
<url-pattern>/adfAuthentication</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>valid-users</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/login.html</form-login-page>
<form-error-page>/error.html</form-error-page>
</form-login-config>
</login-config>
When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
"/faces/postLogin.jspx"
this then adds into web.xml
<servlet>
<servlet-name>adfAuthentication</servlet-name>
<servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
<init-param>
<param-name>success_url</param-name>
<param-value>/faces/postLogin.jspx</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
So the sequence which works is:
Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
So should the form be posting to j_security_check directly or to the adfAuthentication ?

IMac login problems on any 10.6 update

I have a 24" iMac that is 2 years old. After using snow leopard on my husband's new macbook I decided to get it for my imac. The base install of 10.6 works fine but of course it immediately wants to be updated to a new release. If I update it past the base install from the CD I get login problems.
What happens is that the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing. The computer will not move forward. No amount of waiting or button pushing will improve the situation.
Sometimes I could log in to another account but then it would start happening on that acocunt too. I made myself a new account and it started happening on that too. Every time if I did a re-install of the base 10.6 from the CD it went back to working fine. I would have to say no to every update of 10.6 on software update. This has been going on for 6 months. I thought maybe with 10.6.4 they fixed it but it did it again.
yesterday I did a fresh install. Thinking it was caused by my old quicken 2007 or parallels (though its v 5) or something else that has some bit that starts at login I formatted the HD , installed 10.6 fresh and installed nothing but ilife 9. I downloaded the 10.6.4 update and it still happens. I logged off my account and logged back in to test and it froze again. I am at my wits end. The only thing I saved from my old profile was my mail folder. I can find nothing else to fix. Any ideas?

SamNS wrote:
the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing.
Do things behave better if you boot into "safe mode" by holding down a shift key while your Mac is booting?
http://support.apple.com/kb/HT1455

Block simultaneous logins by the same user on wired 802.1x

Is it possible to block simultaneous logins by the same user, meaning is userX login on port gi1/0/1 and after that the same user (UserX) is trying to login on a different port, it will be blocked.

Sorry I did not read your original question correctly. So at the moment, you can only restrict the number of concurrent connections for users that are only going through the web authentication process. If you are using EAP-TLS, PEAP, etc, then there is no method to restrict those users from performing multiple authentications on the network.
Thank you for rating helpful posts!

Not allow simultaneous login on managed computers using profile mangaer

Does any one knows how to not allow simultaneous login on managed computers using Profile Manager instead of Workgroup Manager?
Thanks in advanced

Hi Folks
First - thanks for your help.
Closing this out - here is what I learned:
1) Needed to ensure my server was Kerberised and that Kerebos was running correctly
2) Local users have precedence over network so I need to ensure I don't use the same short name. While using the "id" command you may be able to see the network user ID, the local of the same name appears to take precedence.
3) Using the "kinit" command useful for confirming Kerebos is working correctly
4) Home directories created - had already done this but what finally got this working was stopping and restarting AFP Service.
So was able to successfully login to Mac Client using OD username and password - it mounted the network home share just fine on the client, loaded preferences etc.
Now on to create network users with Mobile Accounts for my laptop users - wish me luck

Skype login problem on Nokia E5

I have login problem in Nokia E5 kindly help me to make successful login

i tried your method but my web browser doesnt give me the option: 'yes,allow always'. it only gives "continue"and "certificate details. no "yes, allow always." :/
how can i proceed pls?

Roaming profile login problem to the domain

Hi all,
Domain Environment, DC Server with Server OS of Microsoft Server 2008 R2 Standart SP1.
Roaming profiles unable to login to the domain on couple of PC's. They just inserting the password, starting to wait to log in with "Welcome"
on the screen, its thinking and looks like hes gona open the user's desktop but in this secong its just logging out back to the login screen.
Thanks for your help.
Best Regards,
Vlad Dodin

Hi Vlad Dodin,
I want to get more information about this issue.
Had you got any error messages during the login process?
If no domain users can log into those PCs?
If this is just a login problem in those PCs and there is no error Roaming profiles error during the login process, this article may be helpful for you:
How To Fix Stopping, Freezing, and Reboot Issues During Windows Login:
http://pcsupport.about.com/od/findbysymptom/ht/windows-freezes-reboots-during-login.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information
I hope this helps.

ICloud login problem on Apple Mail App

So is Apple considering its own Mail App on the Mac to be a third part app? Been having login problems since they started requring two step verification on third party apps. Once I shut off my two step verification on my iCloud account it worked fine.

You shouldn't need to turn off two-step verification or use an app-specific password for your Mac mail to work with iCloud (mine works fine). Try turning tow-step verification back on. If Mail doesn't work, go to System Preferences>iCloud, uncheck Mail, restart your Mac, then go back and check Mail again.

What's causing these power-up and login problems?

I recently switched from Tiger to Leopard (installed by the repairers) and have encountered some power-up and login problems. Basically, my set up is that the computer automatically logs into a non-admin account, launches a Safari page, and then that's it - after checking the webpage, I logout of that account, into my main account, and work from there.
In Tiger :
A few times quite recently the computer would freeze, either while Safari was launching / opening the webpage, or when I tried to logout. Force Quit didn't work (total freeze) so I would force power-off and switch on again, and things would be fine.
In Leopard, one of the following has begun to happen, about two weeks after I began using it:
• The computer reaches the grey screen with an endlessly rotating gear wheel. (Power off / on again)
• The computer logs in to the account; after selecting 'Log out...' I log out, but instead of giving me the login screen, it logs straight back into that account, and this happens every time I try 'Log out...'. (Use Fast User Switching instead to reach main account, where one or two software glitches prompt a Restart) This has happened twice.
• This morning, the computer reached the blue screen where the pointer appeared - faded - appeared - faded etc endlessly (Power off / on again).
Clearly it is not the System - experiencing problems in both Tiger and Leopard proves that. Nor is it my HD - I've had a new one installed. It must therefore be a setting in my login account, though it's hard to see what : I only use that account for login, and a single launch of Safari, and it's been ok for years.
Should i create another login account and see if that solves the problem? By the way, the repairers did not give me any Leopard install disks, so please don't suggest that method of diagnosis. I only have the original Tiger disks.

christopher rigby1 wrote:
2. I don't know what Apple app(s) you refer to? As I said I've upgraded all the free ones, and iLife '06 is working (and I have the disks).
Look in your Applications folder: Any Apple app there, except for the ones you've mentioned. And all the built-in parts of OSX.
3. They told me that I CAN do a full restore from a Time Machine backup (via Disk Utility apparently).
That should tell you something about the quality of their advice.
See: [Mac OS X 10.6 Help Recovering your entire system|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html].
Or the *Restoring your entire system from a backup* section, towards the bottom of [Mac 101: Time Machine|http://support.apple.com/kb/HT1427].
Or look up +*Time Machine+* in Mac Help.
Or #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
And if there's a problem with your installation of OSX (which seems likely), or the Apple apps, you can't reinstall them, either.
4. Having spent hours and hours getting the machine to work properly (upgrading Mail and sorting out Mail problems, upgrading Safari, re-upgrading iTunes and sorting out problems), I'm not prepared to spend hours and hours doing the whole thing in reverse to restore Tiger, including learning HOW to do that.
Correct; unless you have backups of the Tiger system, that's impractical at best.
So unless anyone has a reasonably simple, straightforward answer as to what this problem might be, it looks like I must live with it.
You have some sort of problem with your Mac and it's not going to get better on it's own. Most likely, it will get worse.
If you haven't, try the things recommended by Dale.
Also try running the +Apple Hardware Test.+ It's on one of the disc(s) that came with your Mac, and is tailored to it's particular hardware. The disk should have +Apple Hardware Test+ and instructions for running it printed in very tiny type.
I sympathize with your situation, but the repair shop violated the Apple license, and put you in an untenable situation. If they won't correct it by supplying the Leopard disc, you really should report them to Apple.
You need to purchase a retail copy of Leopard (not the gray discs that came with another Mac; they won't boot yours). They're not shown on the Apple Store website anymore, and eBay and other sellers get a premium for them, but AppleCare should have them for the original $129.

Keychain "login" Problems   Can't remember my Keychain password. Admin Password also does not help. Mac Mini(Late 2012) OS 10.10.2

Series of Keychain "Login" Problems.
Hardware: Mac Mini (Late 2012) 2.5 GHz Intel COre i5, 4GB 1600 MHz DDR3
OS X : 10.10.2 upgraded yesterday
Mail wants to use "login" keychain.   I enter Password but no success.
CalendarAgent wants to use "login" keychain. I enter Password but no success.
Com.apple.internetaccounts.xpc wants to you "login" keychain. Password, not successful.
At some point in past days I was offered to rename Keychain, so I did.
In Keychain Access, I deleted "Login"    and selected Delete references.
Just now I went into ~/Library/Keychains and found Login.Keychain and Login_renamed.Keychain.
I have renamed Login.keychain -> Login-old.keychain.
I renamed Login_renamed.keychain-> Login.Keychain.
In Keychain Access, I added "Login" back. This should be the renamed keychain.
Original problems still persist. No noticeable changes.
Keychain wants to use the "Login" keychain.   Can't remember my password or it is incorrect.
Help?
TITLprods

I turned off and turned on the computer. When restarting it said that it could not use the Login and did I want to create a new or use and alternate? I created new and for the moment things seem to be working under the command of the "New Login"
That still doesn't really alleviate the problem of the old login.

AOL email Login problem The requested resource (webmail/_cqr/LoginSuccess.apspx) is not available

AOL email Login problem on Ipad 4, error message reads:
The requested resource (webmail/_cqr/LoginSuccess.apspx) is not available.
Apache Tomcat/7.2.27
If I remove AOL app than re-add it. sometimes I get a day or so before the error message returns.
My Aol email is accessable from my Iphone OK.
Seaches for this error solution have been fuitless.
Does anybody have any ideas?
VOGO

Add this statement to struts-config.xml
<forward
name="success2" path="/loginSuccess2.jsp"/>
Before trying on tiles, you can add this statement in the method for handling the form in the class LoginAction
return mapping.findForward("success2");

Multiple simultaneous logins no longer being prohibited when unchecked

Since (I think) the most recent raft of software updates were installed, multiple simultaneous logins are no longer being prohibited when the box is unchecked in a user's logon account.
My users are now logging onto different computers and 'lending' their account to people who are not students.
Is anyone else experiencing this anomaly since 10.5.7 or thereabouts?

Figured it out, I just had to restart the server for the changes to take effect.

Login problems using safari5.1

Hi there. I’m on a macbook pro, running safari. I just updated to safari 5.1, and since then all my automatic logins have gone. Ticking the ‘keep me logged in’ box isn’t working, and I have to re-enter all the details every time. Any ideas? Cheers.

Hi asailor, Welcome to Apple's Users Help Users
Forums.
Were you in S 2.0.4 prior to 2 days ago when the prob
started?
Maybe the bank was doing maintenance. What bank is
it? Maybe someone will chime in.
I was using S 2.0.4 prior to the login problem. The bank rep said it
was a Safari issue. I reported the bug to Apple. Yesterday, I was able to login and today I can't. ndbt.com is the bank's website.
Thanks for you help!

Simultaneous login problem

Similar Messages

Maybe you are looking for