Since installation of Mountain Lion the latest version of sony Image Data Converter doesn't work anymore. How can I tackle this problem?

Since installation of Mountain Lion (10.8.2) the latest version of Sony Image Data Converter (Ver. 4.6) doesn't work anymore. How can I solve this problem?

I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you  do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access)  and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM      Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
  iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

  • Since iOS 5activation not possible. Tried it for a few hours but doesn't work. How can i solve this problem?

    When I try to activate from my iPhone it says: iPhone could not be acticated, actication Server is unavaillable. When I connect to iTunes it says: No Sim-Card insert. But my Sim-Card is insert! How can i solve this problem? It's freaking me out. I try it since yesterday without any success...
    Please help.

    If you have to ship your phone back to the US, then you will need to ship is to a friend or a relative who actually lives out there.  You CANNOT ship it directly to Apple as they will not accept it.  Send it to a relative or friend that you have there and if you don't have any, then you are out of luck as there is nothing that you can do.
    That is why is was not really a good idea to purchase an iPhone is the US when you are ultimately going to use it in China.  With no international warranty on the iPhone you are stuffed really.  You should have bought it in China and then you would not be facing this problem.
    Nothing you can do except get on a plane and fly to the US or send the phone to a friend or relative.

  • I have a mini mac and my internet always disconnects after I updated to OSX Mountain Lion.  I mostly disconnects when I skype or watch videos online.  How can I fix this problem?

    It always disconnects and I brought it in the apple store twice and still does not work.

    Hi 'baltwo'
    Thank you for your link, I already had been on this particular website this afternoon. they only discuss problems in the application and nothing about how the MS Office application installation does disturb Mac OS.
    Or have I missed a special comment there?
    In any case many thanks, trioloGo

  • HT4623 I want to upgrade my iPad but it always says that it has the latest upgrade. But I'm only on iOS 5. How can I bypass this?

    I want to upgrade my iPad but it always says that it has the latest upgrade. How do I get the latest one?
    I want to upgrade my iPad but it always says that it has the latest upgrade. But I'm only on iOS 5. How can I bypass this?

    The original iPad can't be updated past 5.1.1.

  • TS2565 when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

    when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

    There was no new serial needed to update from Logic 9 to 9.1.7
    If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
    Otherwise, it's best to call Apple directly and get them to help you...

  • I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

    I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

    You can solve this problem. Just follow these instructions:

  • I bought an i pad as second owner, the first owner said he just open it but when i returned to my twon, i realized that he make account and download some programes, i lost the opportunity to download free I work programes how can i solve this problem

    i bought an i pad (4) on 2014 as second owner, the first owner said he just open it but when i returned to my town, i realized that he make account and download some programs, i lost the opportunity to download free I work programs how can i solve this problem?

    If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
    IF the iPad is working ok but is signed in to another users Apple ID use the Settings app to sign out of the old ID and sign in to your Apple ID.
    Settings > itunes and App Store > tap on the applie ID and sign out > sign in with your Apple ID.
    you should then be able to download or purchase apps using your Apple ID.

  • I have OSX 10.9.4, Safari 7.0.5, and the latest flash player download and still get plug in failure.  How can I fix this?

    I have OSX 10.9.4 , Safari 7.0.5, and the latest version of Adobe flash player.  I have tried all the uninstall and install fixes and I still get flash player failure.  Any other fixes?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Flash won't work very well, if at all, but it shouldn't crash. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

    How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.

  • Using Firefox 4.0 sometimes I can attach photos to email and most often the Attach feature doesn't work. How can I fix this?

    I have Firefox v4.0.1
    If I restart my laptop or my Desktop, both with MS OS, my email, AT&T Yahoo, Firefox browser, will allow the attach feature, for photos to work for a few photos. The when I click to attach another photo, nothing happens. At first I was trying to attach several photos at once. That didn;t work at all. Then I tried attaching one at a time. I thought I had solved the problem because that will work if I retart first. But then not. This is a problem that could make me go back to using IE. I need to be able to attach photos! By the way, I didn;t have this problem before I upgraded to v4.0.

    If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x:
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [ Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • I produced a video with my iphone. The file is about 800 mb. Several times I tried to download it to my computer but this did not work! how can I solve this problem?

    how can I download my video from the iphone to my computer?

    When you connect your iPhone to your PC, a pop-up box should open saying something like "What would you like to do?" and click import videos and photos. If it doesn't open automatically, go to Start>Computer>Then highlight your iPhone by clicking it once>Then on the tool bar about, near the navigation buttons and search box, click Autoplay (or something like that).
    Sorry if my answer isn't as sharp as it should be, I switched to Mac and I use iPhoto for everything.

  • Ive been using the same ipod and same account for awhile now and all of a sudden my itunes account doesnt recognize my ipod anymore. how can i fix this problem without deleting my ipod and resyncing?

    can somebody explain to me why my itunes library wont recognize my ipod anymore. and can somebody help me fix it without having to delete all 951 of my files and resyncing it?

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Also, go to Settings>General>Usage>Manage Storage and see what is using the storage

  • Since i put mountain lion on my iMac all my contacts on all my devices are double how do i correst this

    Why are my contacts double on all my devices

    What are 'all my devices'
    And let's have some more of the info please.
    Which Mac do you have, what version of OSX do you run, how many and what devices are involved.
    If you go to, are they doubled there as well?
    We are not mindreaders, just volunteers.

  • HT202157 After the latest updates my i pads and phone will not AirPlay. How can I resolve this

    Updates completed on my devices and the airplay seems to have stopped. Can not get either of my i pads or phones to airplay. Any suggestions?

    Troubleshoot the network connection.  AirPlay requires that the iDevices and ATV be on the same network.

  • My Ipod has a white screen, and the lock button doesn't work. How can I fix this.

    how do i fix my ipod?
    its screen is white and my lock button does not work i can sometimes bearly see the screen which hepls me find my assistive touch. My friends have told me to put it into recovery mod, but this will not work because of the lock button being broken.

    Place the iPod in recovery mode using this program:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For MAC or PC
    The Firmware Umbrella - TinyUmbrella
    Then restore to factory settings/new iPod. If still problem you have a hardware problem.

Maybe you are looking for

  • Error while opening the XML file

    Hi all, i'am trying to download data from internal table to XML file with root node and its corresponding child nodes.i have written the program in this way. tables: mara. include bcciixml_decl. include bcciixml_impl. parameters: p_matnr like mara-ma

  • Access Not Made (Initialized Field)

    Hello Experts, I have come across a generic problem. I have defined a new field (material Type - MTART) in the field catalog and included the same in the new condition table (Country / Destination country / Material type / Cust tax cla / Material tax

  • My new computer with Windows 8 will not recognise my ipod..

    Has any one had problems with Windows 8 recognising a 4th generation ipod.  When I go to itunes it wont sync.

  • ChaRM: combination of transport strategies

    Hi ChaRM-experts! I plan to map the existing transport landscape into ChaRM scenario of SOLMAN and have the following questions: 1) Is it possible to combine ChaRM-functionality and still use the old transport settings (without ChaRM) for the same sy

  • Inheretance problem

    I need some help with a wierd occurance in my program structure: i made a abstract ColObject class to handle collisions, then i made a abstract MoveAbleObject class which extends ColObject, on the top is the Player class which extends ColObject. now