Since iOS 7 update I am no longer able to connect to Opel Insignia navi cd 500 system via cable. The system is no longer recognizing my iPhone 4. Is there any solution?
First time I connected after an update, there was a message on the phone that this accessory is no longer supported. After that there were no more messages and car's display is showing the message "no USB device connected" even though iPhone is connected to a cable. It was working fine on iOS 3, 4, 5 and 6.
You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup
Similar Messages
-
IOS 7 is working very slow in iPhone 4. is there any solution for this
iOS 7 is working very slow in iPhone 4. is there any solution for this
I have noticed that speed of operation improves after a shut down of the phone and then start up
Cheers
Lory -
I have a older MBP running 10.6.8 and after the recent iOS update I have not been able to sync my devices. I was able to sync an ipod, but not iphone or ipad. iTunes recognizes my devices, but sync button stays grayed. I've changed my USB hub, reinstalled iTunes and run disc cleanup. No luck.
You said that your computer will sync other iPods? Are they iPod touches? Other iPod use different drivers the the touch And iPhone and iPad).
You can try:
iOS: Device not recognized in iTunes for Windows
Does it charge? Does the iPod work?
I would try on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If defective and not abused you will walk out with a replacement -
After updating to 10.7.3 I am no longer able to connect to the internet.
Updated to 10.7.3 this morning on my Macbook Air (Oct. 2010 model). After restarting, I am no longer able to connect to the internet. I can connect to the router, and pull a valid IP address (sometimes - other times I get an automatic private IP), but I am unable to get to any websites, check email, etc. I am able to ping websites AND visit websites using their IP addresses, but not using their DNS names.
I called Applecare this morning, and the tech walked me through some troubleshooting steps, including:
Rebooting into Repair partition to check connectivity there (same issues, no change)
Deleting and recreating various config files (Networkinterfaces.plist, preferences.plist and com.apple.airport.preferences.plist) (no change)
I've also tried reinstalling the update (both delta and combo), repairing disk permissions and rebooting into safe mode, nether of which has solved the issue.
Also on the network are (Mini, not updated to 10.7.3), a PC, my iPhone and an Apple TV, all of which aren't experiencing any issues. Any ideas?
Thanks.Here is something to try. Boot into the Recovery HD by holding
down Command+R when booting. Select the get help online option.
It initially opens Safari with a local web page, but you can use
the bookmarks on the bookmark bar or even enter a website.
Many extensions may not be available but it could tell you if
it is your Lion install that is a problem or perhaps a hardware
problem.
If you can browse around in this mode, then it could eliminate
any possible hardware issues. If you still have problems, then
the issue could possibly be hardware/driver related.
Give it a shot and see what happens. -
Who can fix my Ipad 3 because it won't charge since IOS update?
Ipad 3 won't charge since IOS update, who can fix this expensive item?
Thank youTry a different electrical out.
Make sure you are using the same power adapter and cable that came with the iPad.
And try charging via USB to a computer.
If nothing above helped, reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore the device > iTunes: Restoring iOS software
If nothing above helps, take your iPad to an Apple Store or Apple certified repair provider > Apple - Find Locations
message edited by: cs -
No longer able to connect to Yamaha RX-V675 amp from Apple devices
Sorry for the length of this post, but I wanted to get everything down in one hit and I REALLY need some help as it's driving me nuts!
I have been happily connecting to my Yamaha RX-V675 amp from my Macbook Pro (2010) with no problems since I bought the amp a year or so ago - connected through iTunes > Airplay and it also appeared as a device in my System Preferences > Sound menu. I was playing music from the Remote app on my iPhone (6)/iPad (2) and was always able to connect, which I believe routes through iTunes/MB rather than the device itself.
However, I noticed the other evening in iTunes on the MB that the Airplay menu had turned orange, but I wasn't using it so I didn't think anything more of it. Since then I've tried to connect and the Airplay option no longer appears, nor does the amp appear as a device in the Sys Pref > Sound menu. As an aside, connecting to the amp directly via Airplay from my iPhone and iPad has always been flaky - sometimes I would see the amp as an Airplay device but many times I wouldn't, to the point that I have given up trying.
I also have a Synology Disc Station and I can use the DS Audio app on my iPhone/iPad to play music on the same amp via Airplay. Both the amp and MB are hard wired on my network, plus I have checked my router a number of times and the amp always shows up as connected (plus I can ping the amp and access its web console from a browser on my MB), so there is nothing wrong with the network connectivity of the the devices. I have tried all suggestions made in another similar post, including changing the name of the network on the Yamaha amp via it's web portal, which seems to have worked for many people but made no difference for me. I've also updated both OS X and iTunes with the latest updates, but it's made no difference. I can still however connect via the DS Audio app over Airplay every time.
Even though I can connect via DS Audio, the app itself is a little clunky and I would really prefer to use Remote/iTunes as it is much slicker and previously worked a treat. Does anyone have any other suggestions? Any help would be very much appreciated as I losing a lot of hair over this!excuse me, not linksystem, its a verizon FIOS wireless router & modem as part of the package. i was thinking my old setup.
new system...cant edit my posts....? -
Since i updated my 3gs i have no wifi connection. How can i fix this bug?? My ipad works perfectly good
Here's a troubleshooter:
iOS: Troubleshooting FaceTime and iMessage activation -
I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran. -
I have an iPhone 3G and I had skype installed before it updated to v.4. Now, during a backup, iTunes tells me i can no longer run Skype on my iPhone because the latest version of Skype is not compatible. Is there any way I can install an older version?
How can I contact Viber support? When I go to their website there's no such thing as 'email us' or 'contact us'.
They may have a do-it-yourself troubleshoot system but that doesnt help my problem at all. -
I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/ -
I upgraded my iphone os into 5.1 I found out I'm no longer able to connect into my home Wi Fi....please help
Update router and reboot router.
-
Since i updated 6.1.3 phone is not connecting to wifi?? Help
since i updated 6.1.3 phone is not connecting to wifi?? Help
see also:
https://discussions.apple.com/thread/4909703?start=0&tstart=0
<Link Edited By Host> -
Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?
In the last few days, it seems that my computer has all of a sudden caught a virus.
As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details. -
is there any solution for wifi & bluetooth (gone grey), not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!
If they are grey then the WIFI card has gone bad at this point, service would be needed
-
My apple tv, all of a sudden, is no longer able to connect to my computer. I have restarted EVERYTHING, multiple times, still not working.
Welcome to the Apple Community.
Check your store location is set correctly, if this doesn't help, try restarting the Apple TV by removing ALL the cables for a 30 seconds.
Maybe you are looking for
-
I sent a message from Messages on my MacBook Pro last night and it still does not appear as Delivered. The blue box is there and it never alerted as unable to deliver/not sent. However, when I open Messages on my iPhone5, that same message DOES say D
-
Can I save my Numbers spreadsheet in Xcel?
I just upgraded from Snow Leopard 10.6.8 to Lion 10.7. So many things no longer work as well as they did! I wish I had not upgraded! As a business owner, I like working in Numbers and then saving my ledger in an Xcel format for my bookkeeper. I
-
I would like to create chapters within my footage for Scene selection on the DVD menu
I have edited footage using FCPX and exported it to allow me to use it in IDVD. I now would like to set chapter markers so that the DVD menues allow for scene selection. I believe that I may have to do this in FCPX before exporting it Can you tell me
-
Anyone know how to rotate imported file 90 degrees in iMovie?
anyone know how to rotate imported file 90 degrees in iMovie? i am watching myself laying down giving a talk, and need it to be vertical! thanks...
-
Hi im new an i have 2 questions, firstly how do i get my library of clips to be displayed as thumbnails? and also when i try to add the clips to the time line it just says that it is un rendered. How do i fix that? Thanks in advance