Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen?

Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen? Thank you.

Sadly Snow Leopard was the last OS X to have Front Row and it is no longer offered in Lion or Mountain.
see > Farewell Front Row | Macworld
If you want, you can get it back with some tweaking.
see > Get Front Row for Mac OS X 10.7 Lion
or > Use Front Row In OS X Lion
Also note: that your remote should still be working for waking the Mac, volume control and iTunes...? If it is not, let us know for help with it.

Similar Messages

My iPad have dark spots, a blue, Like some lights are broken...Does Anyone have any idea why this happened?

Does Anyone have any idea why this happened?

Did something happen to it like sliding off a table or something similar? You might want to consider making an appointment at your nearest Genius Bar and have them look at it.

TS3274 My iPad wont turn on it just shows the apple icon and never goes to my lock screen. But when i push the home and lock button it works

Please help

Well have you tried holding down on both buttons until the Apple Logo appears on the screen again? Hold both buttons down for about 10 seconds or so and when the Apple logo appears on the screen again, let go of the buttons.

The remote controls stopped working

I bought with an official Apple dealer the new i Pod Shuffle (generation 3) to use during my bike rides. After the first ride the remote controls stopped working and the voice over feature spontaneously started repeating the songs title. As well the volume control stopped working altogether. I didn't have time to return the Shuffle after only a week so I disable the voice over feature and keep on using my Shuffle with no volume adjustment, fast forward etc ….
After a visit to the Apple website I saw that several owners complained about this problem and assumed Apple would know about it and be ready to offer a fast solution. So picked an official Service Center as close as possible from my location.
First shock the Service Center was dirty, the paint obviously several decades old and faded, the light kept to the minimum.
Second shock not Tech on duty to check something as simple as a headsets. I realized there was no way to have a fast resolution to my problem. The Shuffle will be send to a regional repair center, I could have save the trip and just go to an Apple dealer. What the use to have Service Centers if they don't provide service?
Now when a product is returned, after 25 days of ownership (can't say use), a product designed by a company with the reputation of Apple you expect some kind of sign that the company is sorry, stands behind it's product and will do all possible to solve the problem. WRONG.
Third shock. The person who took my Shuffle obviously never saw a Shuffle generation 3 before or even knew it existed. She explained over and over that I may (but it sounded more like I will) be charge for the repair. Even asked me to pay upfront a basic fee to cover the time of a Tech checking on the product. And that the Tech will give me a quote if I am to be charged. Furthermore She found tons of reasons why eventually I would be charged to repair the product, however no technical person ever checked on the product. Well I guess only users read messages on Apple website not employees of Apple.
So what now? I am suppose to receive an E-mail in 24 hours to 5 working days, in which I'll be explained the result of the Tech investigation.
I guess most owners of Apple products have a better experience with the Customer Service or where the reputation of Apple being a “cool” company comes from? But based on my experience it looks like Apple's products and Apple's Customer Service may not meet Apple's reputation or customer's expectations. Or am I asking for too much?

I seriously doubt you were at an Apple Store and you were not dealing with Apple employees. You were dealing with a 3rd party shop that does work on Apple products.
Don't know where you are located but you could contact Customer Service at Apple and complain but they are somewhat limited it dealing with a 3rd party company. But they will at least have you complaint on file. Or you could attempt to find an actual Apple Store and take your Shuffle there. Or you could try one of the workarounds listed on the threads here.

Next chapter isn't working from the remote control (Adobe Encore)

Hi,
Encore CS5
My project starts with the main menu
-Film1
-Film2
-Film3
-Chapters
All my film1, film3, film3 have chapters and we can access to each capter properly from the chapters menus.
BUT :
Film1 & Film2 --> the next and Prev button of the remote control have no effect, tested on a high end Denon player as well as on a Sony Playstation3 (even if the actions are authorized in their properties in Encore)
And don't know why but it's working on Film3! (all properties seem to be the same!!!)
Note : from the virtual remote control of Encore, I don't see this problem.
Thank you.

That does sound odd. Please post a screenshot of your flowchart, showing those timelines.

Hi there, pls help since I upgraded the software to ios7 i have no more facetime neither in my contacts nor in settings... so i cannot activate it. anyone knows why this happened and how to fix it?thankso

Hi there, pls help since I upgraded the software to ios7 i have no more facetime neither in my contacts nor in settings... so i cannot activate it. anyone knows why this happened and how to fix it?thanks

Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

HT4759 After I add a new PC to synchronize Outlook contacts and calendar with icloud, another PC/Outlook stops synchronizing that had been working fine. Does anyone know why this happens repeatedly? Is there a limit to the # of PCs that synchronize with

After I add a new PC to synchronize Outlook contacts and calendar with icloud, another PC/Outlook stops synchronizing that had been working fine. Does anyone know why this happens repeatedly? Is there a limit to the # of PCs that synchronize with iCloud

Not possible.

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

Have you went to Bose"s support site?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

How can I fix the remote control order of the chapters?

I am using the new 6.0 theme of Reflection Black--submenu Chapters. THis gives you two rows of chapters (which shows the looping movies and title of the chapter). I am importing the .mov slideshows in the order I want them accessed with the remote control of the TV (or DVD Player remote), but this is not the case. Instead, when clicking the right arrow on the remote control, the next chapter is not the one laid down in order, but another chapter. (From the first chapter, it skips to the second row, then back to first row, then back to second row.) Basically, the remote does not forward to the next chapter in the order they were imported.
Can anyone help? I have been told by Applecare that the map icons cannot be reordered. But starting a new iDVD project and importing in order does not work. I tried other themes and the ones with lists work and can even reorganize the order for you if you drag and change the position of the chapter!
Thanks

There seems to be some order in some themes, but this particular one has no order. Hoping also to hear of a solution. Applecare said to reinstall iDVD if I can't fix the problem with creating a new project, but I don't think this is the issue, since other themes work.

Using the remote control.

I noticed that the Apple knowledge based article describing the functions of the remote hasn't been updated to reflect the v 3 Apple tv software. I suspect there are a few users who don't get to use all the features of the Apple tv because they aren't necessarily aware of all the things the remote will do.
In an effort to try to ensure that users get the best out of their Apple TV's I have now produced my own list of functions that are accessible using the remote control. In doing this I realised it involved a little more work than I'd envisaged since the remote performs many functions which can vary depending on which type of content you are using.
I'd be grateful if those of you that are familiar with the Apple tv would take a critical look at what I have done and provide me with feedback on any inaccuracies, omissions or improvements that could be made in relation to the information I have provided.
Using the Apple TV remote control
Message was edited by: Winston Churchill: Having seen the site for the first time I realise I need to do some work on the formatting-I'll put this right in due course, just looking for comments on content for now.

Alley_Cat wrote:
1 - Looks exhaustive!
It was actually, I didn't think I'd need to do quite so much checking that things did what it says.
2 - Having result on the left initially confused me, I think I'd find Action>Result better than Result < Action.</div>
I see the point, but it could possibly be resolved by renaming 'result' as aim, goal or something similar rather than reversing the body text itself. I was trying to emulate the way Apple themselves did this on their KB (Reason I did this - their KB is out of date)
3 - Probably a bit too much information on one page.
Perhaps split into a tabbed layout
Remote | Basic Controls | Music | TV Shows | Films/Movies etc.
Noted, I'm still not happy with the formatting, it needs work, it might not work too well in some browsers, a tabbed page is a little more than my iweb capabilities at present (or at least the way I would want it to work - tabs within a page rather than tabs to change pages)
Jolly Giant wrote:
maybe a slightly larger font ...
Mmmm, not sure about that, I'm always concerned my text is already too large (necessity of white on black), might it not simply make an already long page a bit longer.

OS X Lion and Apple remote control problem

After installing OS X Lion my apple remote control no longer works properly. The menu wont come up on the screen, but it plays music if you press the buttons, but you are riding blind, can anyone help on this one?

It's not a problem with the remote, the problem is that Lion no longer has FrontRow.

HT1338 I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway.

HEY CREATIVE!!!! Where is the remote control plug-in for Mediasource 5?

I just upgraded to Mediasource 5 only to discover that this version doesn't offer any support for my Creative remote control. The remote control plugin on the downloads page says:
"This download is for all Creative MediaSource? (version 3.00.6 or later) users currently using a Creative remote control."
...But when I try to install this plugin, it doesn't recognize that Mediasource 5 is installed. The description should read: "version 3 ONLY".
I found other threads on this as well. The only resolution I found (aside from switching back to an earlier verision of Mediasource) suggested the use of third party software.
Come on Creative, Mediasource 5 and it's other plugins have been officially available for download for since Dec. 22, 2006. That's 7 months.
7 MONTHS!
I've got to admit that I use my remote too infrequently to bother going back to an earlier version of Mediasource but WTF, I shouldn't have to compromise.
It's things like this that contribute in a large part to Creative's loosing market share.

Anyone? I need the volume control panel to enable the spdif out to my external decoder!

An issue with the remote control

The remote control works with other programs, however its doesn't when I use it with Front row. I have paired it with the Imac(10.6.4), it also works ok with the Macbook.
Any suggestions what may be the problem and how to fix it?
Thanks in adv

No not yet, I have two Apple TV's, one was connected directly to my time Capsule in the lounge, the other was connected in the bedroom via WiFi through an Airport express that is located a few metres away.
What happened was that when I got the new replacement Apple TV I fitted this to the main TV due to the new 1080p HD facility. I then took the Apple TV that was in the lounge and working perfectly well and resited it in the bedroom.
It was then that the fault appeared again, so it either means that the fault is on the WiFi side or the HDMI lead I suppose.
The confusion came when the genius said that it wouldnt matter about the WiFi connection.
I will check with a different HDMI Lead if you think it may be that.
thank you for your help
Paul

Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen?

Similar Messages

Maybe you are looking for