Since the iTunes update to 10.6 everytime I open iTunes there is an error message that says that iTunes has encountered an error and needs to shut down. Is there a way to fix this or go back to an older version of iTunes?
Ever since the update, when I load iTunes it encounters an error and force closes. I have uninstalled and reinstalled everything Apple twice and that hasn't fixed the issue. Is there a way to go back to an older version of iTunes?
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357
Similar Messages
-
For about a third of websites I visit, at some point I receive a "Firefox has encountered a problem and needs to shut down" window. I have to disable both Adblock plus and AVG safe search in order to continue. This used to happen for two or so sites, and I disabled the ad-ons before going to those sites. It has increased to the point that the adblock plus and safe search ad-ons are becoming pretty useless. Is there any way to rectify this problem. Sending error reports has no effect.
soytuyosimeamas wrote:
I tried to update but it would not allow me to update, isn't that odd!?
Have you changed anything in the Photoshop installation areas? If the updater doesn't find a pristine installation it will fail.
The only area you should ever put anything into is the plug-ins subfolder. Everything else is hands-off.
-Noel -
Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
== This happened ==
Every time Firefox opened
== Don't knowI don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors. -
I am getting this error message every time I turn on the computer. I have the Airport Extreme wireless router. This has been occuring for the last 2-3 months. I have been to the support page and downloaded current versions and updates. I don't think I have a firewall ( I have AVG virus protection). Also, the scanner part of my printer/scanner/copier has not worked since we installed the router. Help!
The modname is mDNSResponder
The modver is 2.0.4.0
2.0.4.0?
By way of experiment, try installing the latest version of iTunes for Windows:
http://www.apple.com/itunes/download/
That should update your mDNSResponder to version 2.0.5.0 ... with the newer Bonjour componentry in place, do you still get the error when switching on the PC?
If so, is the modver being shown now 2.0.5.0? Or is it still 2.0.4.0? -
When I try to delete this message the website I am trying to reach closes and I revert back to my home page
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help
I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly? -
Trying to gt my computer to move faster i deleted microsoft internet explorer an in order to get my computer to let me on the internet i had to download firefox when i did this i started receiving a message that said Extentsion helper has encountered a problem and needs to close not knowing this came from firefox i tried to delete firefox but kept receiving the messag i have since re-downloaded firefox but can't find extension helper to deactivate it my computer will not let me do anything i need help resolving this please
Stacey FeatherstoneCan you run Firefox long enough to display the Add-ons page? Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable. (Remove also is available for some extensions, but not the ones that Firefox found in a registry scan or shared folder elsewhere on your system.)
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
If you cannot access the Add-ons page, try starting Firefox in Safe Mode, since that deactivates extensions and hopefully will stop that message from coming up long enough to get to the Add-ons page.
''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Success? -
When, I give the print option in my printer HP Laser Jet 1005, the error is occured that Spooler SubSystem App has encountered a problem and needs to be close. And the Computer is hanged. Kindly give me the suggestion to short out the problem. Kindly give me the reply in my e-mail I.D - {Personal Information Removed}
For those who still have this problem, I found the solution on this forum -thanks MP2000 (see http://h30434.www3.hp.com/psg/board/message?board.id=Networking&message.id=839#M839)
Go to the computer that the HP F4280 printer is connected to.
Click on Start --> Printer and Faxes
Right click on HP Deskjet F4280 and select Properties
Click on Advanced tab
Uncheck "Enable advanced printing features"
click OK
And it works! -
After decades, I finally gave up on Microsoft and bought a MacBook Pro. However, for work, I still have to use Microsoft. When I try to edit a Word Document in any way a screen pops up saying Microsoft Word has encountered a problem and needs to close; gives me an option to recover my work and restart Word; when I click that option Word restarts but I alway lose my work. This just started; before it was working fine. Help?
This is a Microsoft problem. Contact them for assistance: http://support.microsoft.com/kb/295539
mitch86 wrote:
... However, for work, I still have to use Microsoft.
Are you certain about that? There are many alternatives to Office today. Consider
LibreOffice (donation-supported)
NeoOffice ($10 but older version is free)
OpenOffice (completely free)
In addition to the above I also recommend Apple's Pages ($19.99). All of these options allow you to open, edit, and save Word-formatted documents and spreadsheets. I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft. -
Hello,
Any idea how to fix this problem that casuses this error?
'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day. This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
'' Problem sending commands to the program"
Thank you
Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PMNI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
Yesterday I started having this error message pop up when I first boot up my computer. I haven’t even started LabVIEW.
Recent changes:
6Jan08 Replaced motherboard and CPU.
6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition). Computer working fine.
8Jan08 Installed LabVIEW 8.0 Student Edition. LV is working fine and the message does not appear.
9Jan08 Download and install NiDAQ 8.6.1. Reboot the system and the above error shows up. LabVIEW works fine so far.
Anybody have any ideas on what the problem is? I have a screen shot of the actual message, but I can't load it on this page.
Oliver
[email protected] -
since the latest update of 3.5.11, firefox opens links in a new window. it used to open links in a new tab. how can i fix that?
The setting in "Tools > Options > Tabs" only works for links that would open in a new window.<br />
That option allow you to divert such calls to a new tab.<br />
For other links you either have to use a middle click or a Ctrl + left click or use the context menu.
Tabberwocky: https://addons.mozilla.org/firefox/addon/14439 -
I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I had to uninstall itunes so that I could load this version as the update to version 11 kept failing. The PC says 11.1.1.11 is correctly loaded, but I now cannot open itunes. Any advice on how to get itunes working again?
Hello there, ytnoj.
Uninstalling and reinstalling iTunes can be a tricky endeavor and must be done in a very specific way. The following Knowledge Base article provides the step-by-step of the process:
Removing and Reinstalling iTunes and other software components for Windows XP
https://support.apple.com/kb/HT1925
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Error code: MobileMe Services has encountered a problem and needs to close
I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?Hi turingtest2 (you pass, BTW): Thanks for the speedy reply. MobileMe doesn't appear in the list of programs which can be uninstalled. I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message: " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]" So googled this error & found a tool called (80072f8f) Repair Tool - I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?
-
Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks
You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5
Maybe you are looking for
-
I have 2 AD account in 2 domain, Singapore and China. Both dom are under 1 forest. Problem is when I used Cisco VPN to connect to Singapore firewall but used China AD account & password, authentication failed. But when I used Cisco VPN to connect to
-
How to Install Leopard on G4 with no DVD Drive
I have a G4 Quicksilver Dual 1GHZ and the internal optical drive is dead and I need to install OSX Leopard on the Computer I also have a MacPro early 2008 Dual 2.8Ghz. for the life of me I can't figure out a way to install Leopard onto the old G4. I
-
How do i save photos in iphoto but not in photo stream
When I take photos with my iphone, it saves a random number to the photo stream. For instance, if I take 5 photos, they all go to the photo stream on my iphone, but on my Mini, one might appear, or more, it is seemingly random. I want to save them
-
Hi All, How can i combine 5 pdf files in to one pdf as PDF file package using Java Scripting. Thanks Mohamed Idris
-
How to use script engine.sh
I've the Standalone BPM Oracle. I want to start and stop the BPM system through the Linux command line. To start the system, I use the script startwebconsole.sh, and it starts the BPM tomcat and the engine that we have, but when I want to stop the sy