Since the latest apple update, voice navigation has gone away. Tried the Airplane mode fix, which worked, but now my bluetooth won't work in my vehicle. What's up?
Since the latest apple update, voice navigation has gone away. Tried the Airplane mode fix, which worked, but now my bluetooth won't work in my vehicle. What's up?
Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply. Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself. I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues.
This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative. This turned out to be a complete waste of time just being a public forum with no Apple employee involved. I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question.
BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.} No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you.
So again Babowa you were so wrong...... and I am right.
Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine.
Similar Messages
-
Hi, recently I downloaded a picture downloading app because I was trying to upload a video on instagram but now my iPhoto won't work, it says another app is running, I have already deleted the app on my phone but how do i uninstall it on my macbook?
Open Activity Monitor by searching it in spotlight.
Go to the app that you downloaded & quit it. If it won't quit then Force Quit. -
As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
HT204150 The latest apple update erased all my contacts! Can anyone help me please?
The latest apple update erased all my contacts
I tried to restore from back up but this was the first time I connected my phone to my computer so when I ran backup my contacts did not return. When I go to mobileme.com my calandar shows up but not my contacts. I could cry.
-
Im updating my Iphone 5c with the latest apple update, but it isnt done after an hour... how long is it supposed to take?
Via iCloud on Wi-Fi about ten minutes at the most. Via iTunes, about the same.
Reset your iPhone.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then tap Settings > General > About then scroll to Version. If it says: 7.1.2 then the update was complete.
If not, follow the instructions for recovery mode >> iOS: Unable to update or restore -
I accidently unplugged my I-pad 2 from my computer during the latest software update and my screen is stuck on the "apple with update bar."
Suggestions?Try and force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I am trying to download the latest iTunes update; keep getting error message that says "The folder path 'My Documents' contains an invalid character". This also happens when I try to uninstall iTunes. HELP!
OK, never mind! I saw another question on the right side that addressed the problem, and it worked perfectly! Went to Major Geeks' page, downloaded the Windows Installer Cleanup Utility, and was able to reinstall the updated version of iTunes! This community is super!
-
I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
My computers uses WindowsXP. The latest Apple Software Update put the latest version of iTunes on my computer, and now iTunes doesn't work. I've tried that instructions on the Apple homepage (delete program, reinstall, etc.), and nothing works. What's worse is that I'm getting error messages every time I log on to my computer. Is this latest version a pile of pooh? Anybody know how to fix this? Or do I need to wait for Apple to figure out where they screwed up?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hi
I down loded the latest software update for IPhone 4s and then i backed up to i cloud now all me contacts data is gone? please helpDid you do a back up first? If so you should be able to sync to itunes again and have everything back.
-
I am having a problem with my youtube account, as since updating to iOS 8.3, the other day, every time I go to my youtube account and click on anything there by opening up a tab, it always goes to the youtube app and then goes back and opens a new tab. Everytime I have updated, it seems to get worse not better. One other thing that happened that has not been fixed yet when I updated a while ago, was that when you have many tabs open and go back and forth between them, it aleays reloads and does not stay the way you left it. Wish Apple would get it right and especially with youtube issues. So my question regarding my youtube account would be if I can delete the youtube app, without affecting my account.
If you delete the YouTube app you will not be affecting your YouTube account. You can always reinstall it & see if that fixes the problem.
As far as Safari pages reloading between tabs, I have also noticed the issue after iOS 8 on my iPad 2. Updating to the latest iOS on older devices can see a degradation in performance within certain apps due to the limitations of those devices.
We made the choice to update & with the many benefits of the latest & greatest iOS there are bound to be some problems too, -
What has happened to my iPOD after the latest Apple update
Not sure if it is connected but my 80GByte iPOD was fine until i compelted the latest update to OSX on my MAC PRO, now I am having problems syncing the iPOD and all the artwork on the ipod does not display correctly for each track
An update on my problem
I have restored the iPOD to it's origianl settings I am still expierencing issues.
I normally set up the iPOD to sync only selected items, this works for a while then I will get an error message ....XYZ iPOD cannot be sync'd unknown error -48.......
After this error I notice that the parameters for sync have changed to Manually control sync ... and Disk mode is selected.
Not sure what is going on here but it looks depressingly bleak........
Mac Pro Dual 2.66 4G RAM Mac OS X (10.4.8) Also running Parallels with XP
Maybe you are looking for
-
SSLSocket to support NIO - feature request voting
Hello All, I know there were many discussions here regarding this subject. I've seen the SSLEngine solution for the problem... But I didn't like it since it is too complicated. For my understanding SSLSocket inherits Socket so an application that can
-
Can't see the ECC 6 infoset listed from CR 2008
Hi there, I think I went over all CR/ ECC6 integration steps but I still can't see my InfoSet when I run the wizard from CR 2008...I m getting NO error just no InfoSet listed under Global or Local tree Any input will be helpful! Thanks, Fouad,
-
I have a video Ipod and it has a few issues. I can't figure it out, when I plug it in, Itunes doesn't recognize it to download songs. I had songs on it and they disappeared. I have charged it and reset it, but no luck. Help anyone!!!!
-
GR unit value coming from the Invoice
I have the following situation: PO 100 units price 3,14 u20AC/unit IR: 1 unit at a price of 314 u20AC/unit GR: Post GR for 100 units and the system is generating the accounting doc. for a value of 624,86 u20AC, that comes from - 1 unit at the price o
-
I created new "PolicyPropertyBundle" and binding it with my class object("MYTESTING") ,but 'type test.xml' returns "The system cannot find the file specified." following is data of mytesting object. Isn't it very simple? <BLOCKQUOTE><font size="1" fa