Since updating to Mavericks, i can no longer use my USB Ethernet Adopter

Since updating to Mavericks, i can no longer use my Ethernet USB adopter as the drivers are only supported to the previous version. I need to use this where i work as Mac's cant accsess the wireless. Ive been told the only option restore to the prev OSX.. The only problem is i havnt set up time machine.
Is there anything i can do to either revert to the original OSX ( the mac is only a month old) or restore to an older version without using timemachine.... Or even better just get my Adoptor to work?
Any help  would be very much appriciated as i can only go for so long with the internet at work.
Thanks

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

Similar Messages

  • Since updating to mavericks i can't open ical or text edit

    since updating to mavericks i can't open ical or text edit.
    do i really have to reinstall, will take me 20 hours athome

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Since updating to Mavericks I can't get a slideshow to work. Any suggestions?

    Since updating to Mavericks I can't get slideshow to work - any suggestions?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?

    Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?

    YEA!  My jurryrig worked!  To all with this problem:
    You CAN have podcasts in a regular playlist IF you convert them to a standard MP3 first.  So, yes, a lot of manual labor
    The good news: if, like me, it is a track that you listen to frequently (in my case meditations for sleep and relaxation) then the time is worth it.  I will mess with automator later to see if there is anyway to script this!  Then, less work for me and more for my mac.
    Here are the steps:
    Select the file from your Podcast folder.
    Change all data you need -- "artist," "album" etc...
    Make a copy of the cover art for this file by dragging it to the desktop.
    Select the Advanced -> Convert ID3 Tags menu item.
    Check ID3 tag version, and select "v1.0" from the drop-down menu.
    Drag the file to the desktop (this will make a copy of the MP3 on the desktop)
    Delete the file from the iTunes list.
    Drag the copy of the file you have on the Desktop back into iTunes.
    Search for the file in the Library, and add the cover art again to the file.
    Now the file is out of the Podcasts folder and works like a regular MP3 file inside iTunes. You can re-add it back to playlists!

  • After the latest update of Itunes I can no longer use it. Windows Error 127 and restore Itunes is the message I get. Do I have to download it again fro m the Apps store?

    Do I have to download Itunes again from the App Store after updating my original I can no longer use it.
    Keep getting the error message Windows error 127, restore ITunes. This has not affected my IPad at all.
    Hope someone can help.
    thanks Jean

    Hello Jean,
    Based of what you have provided then I would say yes download iTunes from Apple’s website and also make sure that your version of Windows is up to date as well. Take a look at the article below to walk you through that plus some other steps necessary to get you back to using iTunes.
    If you can't install or update iTunes for Windows
    https://support.apple.com/en-us/HT201668
    Regards,
    -Norm G. 

  • HT4623 I've updated to iOS6 and can no longer use bluetooth, I have been advised to go back to iOS5.  How do I achivev this?

    Ive updated to iOS6 and can no longer use bluetooth.  I've been advised to go back to iOS5, how can I achieve this?

    There is no legit way at all to go back.

  • Since updating to Lion I can no longer screen share on Snow Leopard

    Hi all,
         I'm hoping someone might have some insight to the problem I'm experiencing with Screen Sharing.  I have two macs that I use - one is a Mac Mini 2010 Server model running Snow Leopard.  The other is a MacBook that is running Lion. 
         Since updating to Lion on the notebook, I can no longer access screen sharing through the Mac mini to the MacBook (Can't see the Lion screen through the computer with snow leopard).  I AM able to screen share the other way (see the snow leopard screen through the macbook running Lion). 
    It's aggrivating, in as much as these computers are on two different floors of my company, and being able to see the screen makes life easier.
    I should also point out that I am able to successfully share the hard drives / files between both computers going back and forth (Snow Leopard to Lion and Lion to Snow Leopard) - it's just the screen sharing that no longer functions.  When I attempt to access the other computer screen it will act like it is signing in but just hangs and does nothing.
    I know there is probably much more information that someone will need to help me solve this, but I don't know where to look.  But I'm hoping that with at least this much information you might be able to tell me where to look to get this corrected.
    Much thanks.

    Nathan Miah wrote:
    Is there absolutely anything else I could do to sort this such as phone Apple Support
    If you want.
    or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
    Did you install Lion on an empty partition, or did you upgrade Snow Leopard?  If you upgraded, I'd not recommend erasing it, since your backups are apparently gone.  It's doubtful Snow Leopard will recognize them. 
    It's not just backups on the drive either, there are other important things on there, so why won't they show?
    Mixing Time Machine backups and other data is not a good idea.  See #3 in Time Machine - Frequently Asked Questions.  It sounds like the whole disk is corrupted.
    I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
    If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it.  That shouldn't prevent it from being seen at all, but anything's possible.

  • Since updating to Mavericks, I can't transfer files to my External HD!!

    Why? I never had this problem prior to updating.

    Firewire or thunderbolt hard drive of ANY Mfg?.......... or USB WD using WD Drive Manager?.........OR just a WD hard drive of any kind using WD Drive Manager ?
    FIrewire & Thunderbolt drives are having issues with Mavericks and HD using WD Drive Manager , avoid same until a fix is issued if you can.
    many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
    Technicians are looking into it.
    Until there is resolution, consider setting up a USB ext. Time machine HD.
    Until then consider confining Mavericks use with USB HD.
    Ive tested a very long line of USB HD on Mavericks, all seem fine.
    *However some are reporting now even USB HD are having problems IF they are running WD software
    Recommend  DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).     
    I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

  • Since updating to Mavericks I can't use the smart groups in Contacts to send emails.  How do I fix this?

    Since updating to OSX Mavericks I can't use the smart groups in Contacts to address emails. This was not a problem previously.  How do I get the functionality of smart groups restored?

    I discovered this problem this morning after upgarding to Mavericks.
    I've found an easy answer: Apple have changed the way it confirms the addition of Groups it seems.
    Type the name of the group in the Cc: or Bcc: field, hit the Space bar, then hit Enter. Vavoom!!
    Hope this helps.

  • Since upgrading to Mavericks, I can no longer see my Time Machine or printer on the network.

    I have uninstalled printer and re-installed drivers but no printer is showing when I click to + new printer.
    Also the TM can no longer be seen... Suggestions?
    Printer = Dell 1760NW
    Both the printer and the Time machine are showing 'green lights'
    thanks in advance

    Regarding the printer:
    From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
    If that does not help then from braden85:
    This first article is about changing or updating printer software in Mountain Lion, and can be found here:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622
    This next article tells you where to find the printer software for your specific printer brand:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669

  • Since upgrading to Mavericks, I can no longer connect to my Bose Sounddock 10 via Bluetooth.  It was fine under Mountain Lion

    Pairing my Bose Sounddock 10 to my Macbook Pro (early 2011) via Bluetooth was fine under Mountain Lion.  After installing Mavericks, connection failed. I deleted the Sounddock & attempted to pair it again.  I get an occasional 'flash' in the 'Devices' list, but no pairing occurs.
    I have no issue pairing the Sounddock to my iPad running iOS 7.0.3.
    Has Bluetooth been changed for Mavericks?
    Is anyone else experiencing similar issues?

    I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
    It still works with the iPhone 5
    Thank you

  • Since upgrading to Mavericks, I can no longer share my documents via email.  It never gets to the mail page. Any ideas?

    Once I upgrades to Mavericks, I first had trouble viewing my old documents saved in iCloud.  Apple Support phone call solved this.  Now I notice I cannot share any of my documents/pages via email.  It never gets past the "next" page for sharing via email.  Anyone with same problem?

    I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
    It still works with the iPhone 5
    Thank you

  • Since updating to 4.2, can no longer get my work email

    Updated the iOS today and now my work email from the exchange server will not download. I get no notification. My AOL mail is still coming thru but I cannot get the work mails, which are the more important. Any ideas?

    I strongly believe it must be something with iOS 4.2, since the people at my office that has not upgraded still can do it. That is both people with 3GS and iPhone4.
    We are writing the exact same information when setting up the phones. Theirs just work and with iOS 4.2.1 its displays that "unable to verify account information".
    I have tried both on 3G, Wifi at home and Wifi at the office.

  • Since updating my OS I can no longer play anything from iTunes on my mac.

    I've updated to Yosemite but now nothing will play on my mac in iTunes.  Other videos, music etc seem to be fine but nothing in my library will play.

    It's OK.  I've managed to cure that problem, only to now encounter another one.  Can't get my mac to recognise my iPod now. :-/

  • After updating to Mavericks, I can no longer navigate to individual folders to save a file. HELP!

    When I wanted to save a file before, I just chose "Save As" and the menu would appear that allowed me to navigate to the folder where I wanted to save the file. If the folder name didn't show up, then I could just double-click (say for example, "Documents"), and then it would display all the folders in that section, allowing me to choose the one where I wanted to save the file.
    That isn't happening with Mavericks. How do I navigate to the individual folder where I want to save files?
    Thank you.

    That only brings up the most recently used folders. It doesn't allow you to go past that list to get to others. (At least it isn't allowing me to.)

Maybe you are looking for

  • Problem with content: 7 - Bad sound Data

    When I do the following... Voice = new Sound(); Voice.loadSound("test.mp3", true) I get the error... Problem with content: 7 - Bad sound Data AND Problem with content: 7 - The sound data format is not recognized. I am using the test.mp3 files that co

  • Language Settings

    I'm wondering how I can change the default language settings on my Macbook (10.4.7), to Canadian English; it's spelt "colour," "Jail," "Centre" and "Center" (no typo). I need this done, because my essays have to be in Canadian English. So far the bes

  • SAPscript MAIN Window ITEM TEXT Printing in NEXT PAGE

    Hi, I need to print the Item Text (Item Description or Column Description) if the Item Values (Lines) goes to the NEXT page in the Form. I have TEXT ELEMENTS defined for ITEM TEXT and ITEM VALUES in the MAIN Window. There is no issue with Printing th

  • How to check an action is complete

    I have some code, seen below, that creates a typing... thing. Basically when you start the code, it creates 26 random letter jumbles on screen, each beginning with a different letter of the alphabet. You then type these jumbles, one by one, to make t

  • Anyone had experience with 5D firmware 2.0.3, EOS Movie Plugin?

    I just downloaded it. How does it work in terms of bringing in new 5D movies to Final Cut?