Since updating to Mavericks I can't get a slideshow to work. Any suggestions?

Since updating to Mavericks I can't get slideshow to work - any suggestions?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

  • Since updating to Mavericks, i can no longer use my USB Ethernet Adopter

    Since updating to Mavericks, i can no longer use my Ethernet USB adopter as the drivers are only supported to the previous version. I need to use this where i work as Mac's cant accsess the wireless. Ive been told the only option restore to the prev OSX.. The only problem is i havnt set up time machine.
    Is there anything i can do to either revert to the original OSX ( the mac is only a month old) or restore to an older version without using timemachine.... Or even better just get my Adoptor to work?
    Any help  would be very much appriciated as i can only go for so long with the internet at work.
    Thanks

    Regarding the printer:
    From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
    If that does not help then from braden85:
    This first article is about changing or updating printer software in Mountain Lion, and can be found here:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622
    This next article tells you where to find the printer software for your specific printer brand:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669

  • Since updating to mavericks i can't open ical or text edit

    since updating to mavericks i can't open ical or text edit.
    do i really have to reinstall, will take me 20 hours athome

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • I can't get itunes to open. Any suggestions?

    i can't get itunes to open. Any suggestions?

    Re-download the latest iTunes version from here:
    http://www.apple.com/itunes/download/

  • After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.

    After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.

    ChrisJ4203, I just tried that and magic...back up and running. Thank you from Wildwatercolors.

  • I have an iPad 5.1- sent iTunes download to my iPad as attachment but can't get it to play. Any suggestions?

    I have a new iPad 5.1. I sent an iTunes download from my desktop to my iPad as an attachment but cannot get it to play. Any suggestions?

    Are you not able to connect your iPad to your computer and sync it from iTunes instead of sending it as an attachment ?
    Syncing with iTunes : http://support.apple.com/kb/HT1386 ?

  • Since updating to Mavericks I can't use the smart groups in Contacts to send emails.  How do I fix this?

    Since updating to OSX Mavericks I can't use the smart groups in Contacts to address emails. This was not a problem previously.  How do I get the functionality of smart groups restored?

    I discovered this problem this morning after upgarding to Mavericks.
    I've found an easy answer: Apple have changed the way it confirms the addition of Groups it seems.
    Type the name of the group in the Cc: or Bcc: field, hit the Space bar, then hit Enter. Vavoom!!
    Hope this helps.

  • When I try to move documents from one folder to another, the image of the document gets stuck and essentially freezes my computer. I recently updated to Mavericks and have a macbook pro 13 inch. Any suggestions?

    So basically my computer has been freezing a lot since I updated to Mavericks. Is that just an issue with the system or probably with my laptop?
    My computer is fairly new( got it in August) and I haven't downloaded much on it. Is Apple planning on releasing an update soon? Also, what should I do to

    So how much RAM do you have installed?  4 GB is generally considered a minimum - more is much better (such as 8 GB).
    And, how much free space is on your hard drive?

  • HT1212 I just got a new IPad mini and must have entered in a 4 digit password when setting up but I can't remember it.  I can't get on the IPad.  Any suggestions?

    I just got a new IPad mini and must have entered in a 4 digit passord.  I can't remember what it is, so I can't get on the IPad.  I had not connected it to Itunes yet.
    Any suggestions?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Macbook wiped clean (2008 model), and I'm not able to save the installer and can't get mac os x.  Any suggestions?

    I recently bought a used macbook (2008) and was told that it was set back to factory settings and came with all the orignal software, box etc.  The first Installer disk of the Mac os X was already in the disc drive, but I'm not able to get past where it saves the installer.  It wasn't able to find anywhere to save it.  I have no clue what to do.  Any suggestions?  Thanks for your help!

    Snow Leopard disc must look like this to run on a 2008 MacBook:
    and not say Update, Dropin, OEM, or any Mac model on it.
    2008 MacBooks could at minimum also use the 10.5.6 retail disc that looked like:
    And some of the earliest 2008 models can use 10.5.4 as well, but it couldn't say Upgrade, Dropin, or OEM or a Mac model on it, except MacBook, if it was the one bundled with that MacBook.
    If the disc is stuck in the drive, use this tip to remove it:
    https://discussions.apple.com/docs/DOC-1015

  • Can not get firefox on I-pad any suggestions?

    Can not get adobe flash or fire fox on my I -pad any suggestions? Thanks

    You need to set up existing email accounts through:  Settings > Mail, Contacts, Calenders
    Here's a how-to page filled with instructions: https://www.apple.com/support/ipad/mail/
    You need to be more specific as to what your problem is.

  • I just bought a new Epson projector, connected it to my Mac with a USB cable but can't get anything to display.  Any suggestions?

    I just bought a new Epson projector, connected it to my Mac with a USB port and can't get any display.  Any suggestions?

    USB is not a Video Interface. to use it with this projector, you must have downloaded and be running:
    Macintosh
    USB Display v1.50
    Mac OS X (v10.7 - v10.7.x), Mac OS X (v10.6), Mac OS X (v10.5)
    epson14423.dmg - 2.9MB - posted on 10/24/11
    This file contains the Epson USB Display v1.50. This software, along with a USB cable, allows you to display images from your computer to your projector. 
    Installation instructions:
    Double-clicking this file creates a disk image on your desktop.
    Open the disk image.
    Double-click the installer icon to begin the installation.
    Download Now
    I think it may be superior to get a VGA or HDMI adapter and use the display features built into your Macintosh.

  • Charter Cable can't get email on iPad. Any suggestions?

    Charter Cable can't get email. Any suggestions?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • HT5012 Can't get my imei number! Any suggestions?

    *#06# doesn't work either! I also went to settings and general then about but my phone doesn't have a imei  number but it does have a meid number? Any suggestions on how else to get imei number?

    If you don't show an IMEI, then either you have a CDMA iPhone 4 (such as for Verizon) or your iPhone has a hardware problem.
    Regards.

  • Since updating to Mavericks, I can't transfer files to my External HD!!

    Why? I never had this problem prior to updating.

    Firewire or thunderbolt hard drive of ANY Mfg?.......... or USB WD using WD Drive Manager?.........OR just a WD hard drive of any kind using WD Drive Manager ?
    FIrewire & Thunderbolt drives are having issues with Mavericks and HD using WD Drive Manager , avoid same until a fix is issued if you can.
    many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
    Technicians are looking into it.
    Until there is resolution, consider setting up a USB ext. Time machine HD.
    Until then consider confining Mavericks use with USB HD.
    Ive tested a very long line of USB HD on Mavericks, all seem fine.
    *However some are reporting now even USB HD are having problems IF they are running WD software
    Recommend  DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).     
    I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

Maybe you are looking for