Since upgraded phone to 2.0, cannot send out email

I recently upgraded my iphone to 2.0 (mistake!) and now cannot send out email from my iphone. I have tried deleting all my email accounts and re-setting it up on my iphone rather than syncing with my computer but it still will not send out email. I can send out email from my computer and used the same settings for both...

Also having mixed success sending mail on the iPhone, which is disappointing because I haven't had to send a lot of messages. Out of about 6 attempts, I've had two replies completely disappear. They weren't sent, they weren't in the outbox to send later. They just disappeared. One was while on my home network, the other was while I was traveling. I am very bothered that the emails aren't saved to try and send later.

Similar Messages

  • TS3276 I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

    I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

    I had this problem too but I fixed it today.
    Go to the mail menu preferences.
    Click on account in question.
    Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
    Click on the advanced button.
    Make sure use default port is checked.
    Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
    Have authentication set to password.
    User name should be your email address for that account.
    Make sure correct password is entered (for some strange reason my password box was blank on this account).
    Push the ok button.
    For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
    I hope this helps.
    Here is a link to some visual aids with the steps from my ISP
    http://support.knology.net/content/smtpauth/smtpredirect.cfm

  • When will Centurylink finish working on email system? Cannot send out emails with Thunderbird

    For a month I have not been able to send out emails. I receive them but cannot forward or send new messages. All my settings from Centurylink are correct. They keep telling me that they are working on "stuff" and cannot give me an answer as to when they will be finished.
    Does anyone know any thing about this or if it will be ever resolved? Should I delete and re install Thunderbird? It worked fine one day, the next I cannot sent out anything. this is what I get after a long wait.
    Sending of message failed.
    The message could not be sent because the connection to SMTP server smtpauth.centurytel.net timed out. Try again or contact your network administrator.

    Hi Matt,
    Thank for for taking the time to reply. I am not sure how one checks the anti virus. I have had Eset Nod for ages and have had no problems with anything. My email send outs worked fine then didn't. Centurylink keeps telling me that they are working on issues but it is taking way to long.

  • Since upgrading to Firefox 5 I cannot view my emails on my ISP's web site, can you help?

    Since upgrading to Firefox 5 I can no longer view my emails on my ISP's web site, can you help?

    I haven't heard of any similar message before. In your "More system details..." it lists two different Adobe PDF plugins, version 8 and version 9. You may have a conflict there, especially if the older one isn't disabled. You could try to disable it here:
    orange Firefox button ''or'' Tools menu > Add-ons > Plugins category
    If that doesn't help... Adobe Reader and the plugin have been updated to version 10. but Are you willing to upgrade Adobe Reader to see whether that fixes the problem?
    http://get.adobe.com/reader/

  • TS3276 i cannot send out emails...why?

    I don't know why i can't send any emails out...can you please help?

    Please describe in detail all you have attempted to do in order to resolve the issue. 
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Cannot send out emails

    I could not send out mail, kep asking for password but kept rejecting it. This is the box I kep getting even after I put in my password for my iCloud.
    Enter password for account .Mac
    The iCloud IMAP server “p05-imap.mail.me.com” rejected the password for user ”[email protected]
    Enter your password again or cancel.
    Can someone help me? Thanks.

    Sometimes this seems to correct itself with icloud just having a bad day, but often deleting and recreating the account in Mail>Preferences>Accounts seems to resolve it. Has worked for me 2 or 3 times with my me.com account.
    When you delete the account all your emails will disappear but re-appear when you re-create it, as it's IMAP.
    I still keep a backup of my important emails, just in case, but have never needed them.

  • I cannot send out emails from my iPad,says my email address was rejectected by server. I am receiving mail, but can't send?

    When sending emails from iPad,I get message: email was rejected by server.  I am receiving mail to rejected email address

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • Since the apple ipad update I cannot send email from my ipad

    I cannot send out emails from my Ipad or my Iphone
    message says,  cannot send mail
    a copy has been placed in your outbox.  the recipient "    "  was rejected by the server,  I get this message on both ipad and iphone
    help

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • HELP! My Office Mail Cannot Send Out Externally!

    Hi all, recently I've upgrading/migrating to my new G5 in the office (whopee, finally!) I have transferred all my old data to Mail, settings everything etc, I can send and check email, I can log on to my office intranet and can actually surf the web, the only thing I cannot do is send email EXTERNALLY!!
    Help! I have checked and even toggle some settings, e.g. in Mail account, under SMTP, use Authetication/Password etc but still no avail...
    Anyone with such similar experience?? Thanks and cheers

    Hi, just some updates, I have tried several methods, including the most drastic one by removing out all the Mail folders, data, plist preference files etc, and start Mail anew, creating my office email account from the ground up, and still, I cannot send out email externally - so "proving" my "old" mail data is ok, so I copied them back.
    Could it be the SMTP that is causing all these problems?? Our office POP and SMTP settings are in "IP style" numbers addresses, e.g. xx.xxx.x.x
    I am trying to get my IT dept to give me a new SMTP, if possible...
    Here's another thing I found out when I launch Mail Connection Doctor:
    It reported status Green, and Details-Connection and login to server succeeded.
    But... Internet Connection Status, RED - Mail was unable to connect to the internet, click the "Assist me..." button for help diagnosing the problem.
    When I continue with the diagnostic, it says "Your internet connection appears to be working correctly."
    So I guess the office network/intranet has no problem connecting to the internet... but is this affecting Mail's ability to send out email externally??
    Cheers

  • TS3899 For my email account of Yahoo, I can receive emails but I CANNOT sent out emails.

    For email function of the IPhone, I can receive emails but CANNOT send out emails. Pls assist.

    Are you getting any errors?
    Try this:
    http://www.apple.com/support/iphone/assistant/mail/

  • Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts.  Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts.  I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • Cannot send 100 emails since "Yahoo" upgraded

    Once a month I have to send the same email to 100 group members from Thunderbird. I have done this for 4 years, but since "upgrading" to Yahoo last week I cannot. Message received is "http://postmaster.yahoo.com/abuse_smtp.html " Three times I have filled in the BY Yahoo form with no response. Googling this not uncommon problem I see the usual recommendation is to change the IP which I have managed to do, but still cannot send out this message. I believe the block is there because a friend's email address book was compromised - by completeing the scam BT email ironically - so my address has got caught up somehow in this. I can send and receive single emails but not the 100 I must send out. Yahoo have told me that there is a block of around 200 but certainly not the 100 I want to send. Anyone any ideas please?
    PS I have run a full Anti-Virus and Malware check.

    MissMoppett wrote:
    An update. Having sent 4 emails over past week I rang and had several conversations of half an hour with Delhi. Although I was sure it was BT and not Thunderbird they changed the password, switched me back to the old "Classic" Yahoo and fiddled around all to no avail. All they could suggest was I send in batches of 25 which is not the solution. BT admitted I was not alone and that there is no daily limit, contradicting the info given to me last week (200). By transferring my address book by .LDIF file I can send from my wife's laptop - different email address but still with BT - and also with Thunderbird. I am convinced there is some sort of block on my email but BT cannot resolve problem. I was also told that the help line no. only deals with xxxxx.btinternet.com problems not xxxxx.btopenworld.com which is my email but could not give me anther tel no. Another annoying thing is that when I quote the "confirmation reference no." BT Delhi cannot trace it which means I have to repeat the whole saga over again. Their systems are a mess.
    Hi. Welcome to the forums.
    Sorry I missed your first post, I was going to reply.
    There actually is a limit of 100 emails in any one batch, and has been for a number of years. It used to be 200 before then (but that is well over 5 years ago). I used to send similar amounts for a sports group and send in two goes back then due to the limit of 100. This batch applies to smtp sending from a mail client program such as Thunderbird, I'm not sure if 200 may apply to any webmail type access.
    btinternet.com and btopenworld.com are interchangeable email addresses and effectively the same, apart from logging into external systems that you may have chosen one or the other.
    I have seen this silly blocking system before, but it's frankly ridiculous due to the other restrictions in place.
    Changing password and altering to Classic mail is actually tryng to guess the problem as it is 100% not that at all. The upgrade has nothing to do with this problem, as you are using a mail client.
    It does seem like something has thought that your sending is falling foul of any spam interrogation system. Is your list actually 100 in size ?
    You could try spliiting it into 2 and having 50 each and try to send to see what happens. I agree it's not a solution but may help in the initial stages, and then next month you could say move 25 into one of the batches to make it 75/25 and so on.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Since upgrading to Yosemite three days ago I cannot send/receive emails. Can anyone help please?

    Since upgrading to Yosemite three days ago I cannot send/receive emails. Can anyone help please?

    I would try to reset all the settings in Mail, Preferences, Accounts (outgoing and incoming servers) according to your mail providers specs.

  • Since upgrading to Mountain Lion I cannot connect to my wireless router

    Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

    Try this, it's for information.
    In Finder, open the Go menu, press and hold the option  key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

  • Since upgrading to IOS8 I can't send or receive emails.  Can I uninstall?

    Since upgrading to IOS8 I can't send or receive emails. Can I uninstall?

    That's strange.
    I bet you updated your iPad without using iTunes.
    Anyway
    No, you cannot uninstall iOS 8 and downgrade to iOS 7, but you can try reinstall iOS 8.
    I would suggest you to do it from DFU mode.
    Here are some things you need to know before proceeding:
    You WILL NOT lose your photos, messages, notes, reminders or anything on your device.
    If you choose to backup on iTunes, you will NOT lose your Apps. Anyway, if that happens someway, (it shouldn't happen, don't worry) you can download them later for FREE.
    Here's how to proceed:
    -First of all, as usual, do a complete backup of your device either on iCloud or your iTunes (i personally suggest iTunes. If iTunes asks to backup Apps, agree.)
    -Put your device in DFU [While the iPad is connected to iTunes, press and hold both the home and the power button. When the Apple logo appears, release the power button and keep holding the home button until you see the iTunes logo on the iPad screen.]
    -Once your device is in DFU mode, iTunes will automatically detect it as an iPad in recovery mode, so it will ask you to restore your iPad.
    -Click on Restore and accept iOS 8 terms and conditions to continue the installation.
    -Wait for iTunes to download and install the software.
    -Once your iPad restarts, you will be guided to the configuration of your iPad. When it asks you if you want to configure it as a new iPad or restore from a backup, choose the iTunes or iCloud backup depending on where your backup is.
    -Wait for iTunes to restore your device.
    You're done!
    Now test your device and let me know if everything works well!
    Cheers, @tooFrozen

Maybe you are looking for

  • Facing syntax error while calling stored procedure

    hi iam calling a stored procedure which is a sybase USP.my code is as follows clsm3=CommonLib.cnClient.prepareCall("{call SYB1103.SIFGSYS..USP_Ins_ShipmentInvLines_Tmp "+coid+",'"+invclass+"',"+newsysno+","+productcd+",'"+batchno+"',"+qty+","+product

  • How to capture all the values(occurrence) using Extraction Rules(correlation) in VSTS web test?

    Hi,   I am using VSTS 2010 for performance testing and have a question about Extraction Rules functionality.  Requirement below. Example : Server Response <a>1</a> <a>2</a>  <a>3</a> <a>...</a> we need to capture all the values with same left and rig

  • ANT: Include classes from another jar

    Hi all. Can I add classes from another jar to be added into my jar-file? Other words, may I write something like this: <target name="jar" depends="compile"> <jar destfile="deploy/my.jar" basedir="${compile.dir}" includes="another.jar" > </jar> </targ

  • Firefox appdata folder can't be opened?

    I wanted to reinstall Firefox because I was having some problems, and when I tried to open it again, I got an error saying that "my profile could not be found". So, following the advice of others on here, I tried to open the Firefox appdata folder, b

  • Header for 'ZFI_ITEMS_DISPLAY'

    Hi,    I have made function module similar to "FI_ITEMS_DISPLAY"  as 'ZFI_ITEMS_DISPLAY'  .... As output is coming in ALV...can anybody tell me how to write for the Header of this alv report.... In normal alv  we use to pass exporting parameter i_cal