Single ADS for multiple SAP systems ?

Can a single ADS installed in a JAVA stack possibly along a EP 7.0 serve multiple SAP systems in my landscape. We got ECC 6.0, EP 7.0, BI 7.0, SRM 5 etc in our landscape. I was wondering whether I can install ADS on any of these systems with Java stack and leverage the functionality to other SAP system or should I have ADS on all the Systems ?
Help appreciated
Thanks

We are using one ADS for more than 10 systems in our product development. It works fine.

Similar Messages

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

SAP Webdispatcher for multiple SAP systems

Hello friends,
I need some info on SAP web dispatcher configuration for mutliple SAP Systems (different SIDs).
Is it require to install & configure multiple web dispatchers for mutliple SAP Systems (different SIDs)? If it so, what would be the steps and provied me some links
regards
Anand.M

> ... what would be the steps and provied me some links
This you can do on your own, using the search --> then ask more detailed questions.
> Total Questions: 6 (6 unresolved)
This you should also do on your own --> Follow up on questions you have asked.
Please read the forum rules if you have not done so yet.
Cheers,
Julius

Single Web Dispatcher for Multiple SAP Systems

Having read a number of posts & S-Notes, I found that Web Dispatcher 7.2 is capable of routing between multiple SAP instances.
But despite having troubleshooted, I am unable to make it work. I have two separate installations ERP & Portal on the same host, but my web dispatcher only routes to one of them at the same time. Simultaneous access to these 2 systems is not possible either with URL or Port control procedure mentioned at url http://help.sap.com/saphelp_nw72/helpdata/en/c5/ec466f5544409982c7d3ca29ce1ad3/frameset.htm
Can anyone point an error in my below mentioned configuration of web dispatcher file.
I want requests on port 8853 of my web-dispatcher to be routed to system DEV &
the requests on port 8843 of my web-dispatcher to be routed to system DEP
rdisp/mshost = sapdeverp
ms/http_port = 8100
icm/server_port_0 = PROT=HTTP,PORT=8853
icm/server_port_1 = PROT=HTTP,PORT=8843
wdisp/system_0 = SID=DEV, MSHOST=sapdeverp, MSPORT=8100, SRCSRV=*:8853
wdisp/system_1 = SID=DEP, MSHOST=sapdeverp, MSPORT=8102, SRCSRV=*:8843
Can we mention multiple message servers instead of single message server "rdisp/mshost = sapdeverp
ms/http_port = 8100" ?
Any suggestions ?

Very right in mentioning this point coz myself have been confused over it but if I remove these lines & execute the -checkconfig:
then it states as below:
Checking SAP Web Dispatcher Configuration
=========================================
maximum number of sockets supported on this host: 8192
Server info will be retrieved from host: : with protocol: http
Checking connection to message server...
ERROR: Connection to message server failed: NIESERV_UNKNOWN
Check ended with 1 errors, 0 warnings
More over accessing the servers give the following error:"
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Mon Nov 29 17:28:11 2010
Module: http_route.c
Line: 3139
Server: solomon__03
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
I have tried this actually, even tried the option ms/server_port_0 & 1 to replace ms/http_port but it didnt work either.
Any more ideas.. ?

Compliance Calibrator for multiple SAP systems

I was wondering if anyone could assist me with my query. We are currently performing an implementation of Virsa CC for a client and have begun to configure a CC DEV system they have installed with their custom SoD rule set. The DEV CC system (sitting on a stand alone NetWeaver box) is "connected" to four SAP systems (DEV, QA, HR DEV & HR QA). When we are building "functions" (i.e. raise purchase orders) in CC it asks us to define a SAP system when we are entering the transaction codes. We've been configuring the functions with SAP DEV as the system, however when we run the analysis of results we would like to get results from QA as well. It appears that the risk analysis only works for the system that you have defined the functions in (i.e. we get results for users in DEV but not for users in QA).
My questions are as follows:
- Do you need to define all the systems you wish to run a risk analysis for within the function (i.e. function = Raise purchase orders. DEV ME21 & QA ME21)?
- If so, is there an easy way to convert our functions so that they point to QA as well (we've noticed that we can't edit the SAP system once the function is saved)?
- Is it possible to export the functions and then define the SAP system when importing them back into CC (we've noticed with the SAP delivered rule set that SAP DEV was automatically defaulted)? This is particularly relevant as we would like to export the rules from the DEV CC system and import them to the PROD CC system without having to manually create the rule set again; and
- Is it possible to export the rules and manually change the SAP system reference and import them back into CC (i.e. do a "replace all" DEV to QA)?
Any help would be greatly appreciated.
Thanks,
Alexi

In order to perform what your are trying to do in CC 5.2, you will need to go to configuration and setup a logical system, such as SAP R/3 and define all the appropriate systems for the logical system. Then, when modifying the functions, you will need to set the tcode (action) to the logical system defined, such as R/3 or APO, etc.
The cross-system functionality only comes into play if you want to analyze the SOD where a conflict would occur if a user had access to one function in one system (for example - purchase order processing in APO) and a conflicting function in a different system (for example - Vendor Master in R/3).
If you simply want to check who has violates a risk against multiple system - the logical system is the best way. You can have an logical system by system type - R/3, BW, APO, SRM, etc.
To convert this over, you can export the rules and during the export you have to define the new system when exporting the file. If that doesn't work, I'd just delete everything out, and use the upload files to reload the rules with the correct data.

Single hierarchy for multiple target systems

Hi,
I have a version named "Account" with a hierarchy named as "Acc2013".
the hierarchy "Acc2013" is same across Oracle EBS, Oracle Fusion GL, and HFM.
how can i assign multiple node types to the same hierarchy so that i just need to maintain one hierarchy (this case account hierarchy) and select the properties pertaining to each target system?
i.e. i select the Oracle GL from the drop down and give the details for the Oracle GL then i select the HFM category from the drop down and provide the HFM related properties.
the reason why i am asking is, if i dont give the node type, all the unnecessary properties are showing up for other type of hierarchies. for e.g. there is another hierarhcy named cost center there its showing the account related properties.
to summarize, how i can utilize a single hierarchy to be used for different target systems? Appreciate your help. do i need to create different version and hierarchy for different types of target systems?

I'm late to respond to this, but I always preach to customers that it is critical for DRM to act as an enterprise view. This isn't a "System A" hierarchy, or a "System B" hierarchy, but rather it's an asset that is shared by both systems, and therefore attributes for both systems are valid. Since node types provide the ability to hide properties, many interesting options present themselves, not all of which lead to a good outcome in the longer term. If a user doesn't ever want to see properties for a particular system, it would be better to just remove their access to that property category in many cases. (They may already have read only access but they object to "being bothered" with seeing those properties.)
I've seen many DRM implementations head down the other path and end up with duplicate maintenance requirements, configuration challenges, or even having to do major reengineering efforts to transition DRM from a Finance department tool into an enterprise use case feeding a data warehouse. A current customer of mine used a scheme where a checkbox on each property category would make the properties disappear if unchecked...this worked great with a handful of node types, but unfortunately the number of node types needed to support all of these property category combinations was bound by factorial math principles. Consequently the maintenance for this solution went from unweildy to unmanageable as more "non-HFM" data was added to DRM.
DRM implementations should be guided by governance principles and maintenance business rules, rather than than how things appear in DRM. It's how they appear when published that is of primary importance. I think the new features related to Data Governance will help greatly in this regard. Users that are overwhelmed by the DRM UI can easily be limited to the attributes that are relevant to their specific workflows, and only the "Power users" will see everything.

Fall back systemwhen multiple SAP systems trying to acheive SSO with BOEXI

Friends,
I need a small clarification on ' SSO between BOE XI 3.1 and SAP BI 7' Scenario,
Say when multiple users log on through their SAP EP Portals or Netwever Portals, they use their tokens generated by their respective EP portals which are passed through the 'Web application server' hosting BOE environment.
1) When its a Single EP portal , we can have have a fall back system. when we register its logical name in the CMC of BOE Environment , a typical SNC.But what's the fall back system for multiple SAP systems?
2) Also Whether there are any pit falls via token method when more than one SAP system communicating to BOE?
3) Do we have any documentation for this?
Thanks ,
Sivakanth.

Hi Sivakanth,
the normal scenario for SSO is the following:
When you said ''back end system ', i did not get it.
Enterprise Portal -
(iView)-------> BOE -
> SAP BI <- This is your backend system
Well Could I define more than one logical name there in SNC tab of CMC.?
I assume you have the following situation:
(EP1, EP2, EP3) -
> BOE -
> (SAP BI 1, SAP BI 2, SAP BI n)
You can define more than one entitlement systems in the BOE CMC and also configure for each one of them for SNC. Please note that we are talking about server trust and NOT client trust here. It is all about letting your sap system and the boe system trust each other. If you have your portal with client SNC configured (ie. the user logs using a certificate and an SAP logon ticket is created) it is NOT necessary to configure SNC in the CMC (Please refer to the section "Configuring SAP Server-Side Trust" in the installation guide for the integration kit for SAP) side.
Back to the SSO scenario now: When a user connects from an enterprise portal on the BOE system the logon ticket, generated from the portal, is forwarded to the back-end system, which is defined in the portal iView the user is currently navigating through. If it is a Crystal Enterprise iView then you just have to select the appropriate system alias of your back-end system in the System drop down menu when creating the iView. For URL iViews you must utilize the relevant openDocument parameters. If you do not define anything at all when creating the iView then BOE tries to authenticate the logon ticket against the SAP BI system you selected to be the default one in the "Authentication->SAP->Options" tab of the CMC.
If what you want is just to distribute the load between your SAP back-end systems then you should consider utilizing an SAP cluster for your pursposes. As explained before BOE will not distribute the requests evenly on the back-end systems. It will try to contact either the system defined in the request (iView) or the default system. To be honest I am not sure what happens if the explicitely defined system is not available but I think that an error message is what you should expect then. I do not think that in this case the BOE system tries to use the system defined as default.
Another part is what kind of security is defined in BEX querys..as i read from SAP IK guide, we can import all the roles which are defined at ABAB level.
Will there be any security threats to SAP data via this method.
It is true that you can import all roles in your BOE system. But keep the following four things in mind:
1) You can restrict on the BOE side the users which are authorized to logon in the CMC and import the roles (normally only the BOE administrator is authorized to do this)
2) Importing a role means that an SAP user can try to logon the BOE. Still the logon process can only be succesfull only if the SAP user has special authorization on the SAP side (Please check the Appendix "Authorizations" in the installation guide of the integration Kit for SAP.
3) You can restrict the access to data by assigning authorizations only for specific infoareas/infoproviders. In order to partially restrict data access in a given infoprovider (e.g infocube or multiprovider) you can utilize authorization variables in your BW query.
4) You can further restrict access on specific reports either on the BOE side or on the portal side (by rstricting access to the defined iViews).
For sure you must invest some time to define and implement your security concept.
More over could you please answer other 2 questions in my original question.
2) Also Whether there are any pit falls via token method when more than one SAP system communicating to BOE?
3) Do we have any documentation for this?
2) As long as your portals, the back-end systems and your BOE system are configured correctly for SSO this should not be a problem. Well just a tip based on my experience: be sure to use full qualified domain names for your systems in the iView definitions. And do not forget SSO works only if all systems are in the same domain.
3) As said in my previous posting the netweaver documentation regadring SSO setup maybe interesting for you. As far as I know the multiple systems scenario is not contained explicitely in any official BOBJ documentation. I assume that you already went through the installation guide for the integration kit for SAP.
Please tell me if you have a completely different scenario in mind
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Mar 22, 2009 12:27 AM

Multiple SAP systems on One database

Hello,
We are planing to install multiple SAP systems like SM, ERP on one database with multiple DB SIDs, it means each SAP system has its own Oracle instance. We know MCOD has only one DB SID (one oracle instance) for multiple SAP systems.
Is it possible to set up the landscape like this? Is it supported by SAP?
Can any body advice?
Thanks,
Kris

>
Kris wrote:
> Thanks Markus,
>
> But we want to install one DBMS home for all oracle instances for different SAP components. Is it possible?
>
>
> Thanks,
> Kris
Technically, it is possible.
But SAP Does NOT support it. The only method to install one set of binaries (one ORACLE_HOME) that is supported by SAP is to use MCOD (all components are installed in one Database)

Multiple SAP systems - Single Content Server

In a production landscape with multiple SAP systems and a single Content Server, would it be more efficient to allow each Web AS to access the Content Sever directly or should there be a single dedicated Web AS to access the single Content Server?
We do not have any load data; we are trying to find out if there are any heuristics for such a configuration.
Message was edited by: John Ryan

You may use the SAP Content server for data archiving. If you use content server, you may not be be able to satisfy the legal requirements as SAP content server cannot support a WORM devise.
SAP do not recomment using SAP CS for Data archiving as well. SAP CS could be best used as a temporary content stoarge for non legal document images.

Assignment of One Solution ManagerDiagnostics Agent to Multiple SAP Systems

Dear Experts,
according to the Powerpoint presentation attached to SAP Note 1365123, one single Solution Manager Diagnostics Agent can be used for E2E RCA with multiple SAP systems running on its physical host.
I have installed one Diagnostics Agent on a server where three ABAP systems are running. Each ABAP system on this server has been installed under an alias (i.e. all these SAP systems are reachable under the same IP address. No virtual servers with individual IP addresses have been defined.). I want to configure each ABAP system for E2E RCA. When running the Managed Systems Setup procedure for E2E RCA, I am not able to assign the diagnostics agent to more than one of these ABAP systems - after the first system has been configured for E2E RCA, the entry for the Diagnostics Agent on this particular server is no longer available in the drop-down list of Diagnostics Agents when configuring the next system.
Is my understanding of the presentation mentioned above wrong, or am I missing a trick here? How can I assign the Diagnostics Agent to all three SAP systems that are running on the same physical host?
Details about the environment:
SAP Solution Manager: SAP EHP1 for Solution Manager 7.0 (SP Level 24)
Diagnostics agent version : 7.01.7.0.20100326100205
Thank you for your time,
Rainer Walter

Hello,
Have you followed all the rules?
Rule 1
Consider the diagnostic agent as a standard SAP system
Rule 2
Install one Diagnostic Agent per host (Physical or Virtual) (You mentioned you don't have virtual hosts)
Rule 3
Each Diagnostic Agent gets mapped to the SMSY repository using the server name key
Rule 4
Do not install a Diagnostic agent on a host that only run databases or SAP Central Services
Rule 5
An Agent can only conenct to one single Solution Manager System
If you install multiple Diagnostic Agents on the same host, each one needs to be connecting to a different Soltuion Manager system
Rule 6
Choose the adequate diagnostic agent installer/version
Rule 7
In a switch over scenario diagnostic agent must move with their respective virtual host and managed components
These are the rules attached to SAP Note 1365123. You need to comply to the rules.
If you have multiple agents ont he same host, then they need to conenct to different solution manager systems....according to the rules. One agent per physical host is one of the rules...specifically rule #2. This is my take, and it seems pretty clear here.
Regards,
Paul

Multiple SAP Systems with one Unique ID

Hi,
SAP recommend to have <sidadm> and <sapserviceSID> user account for each system.
Currently we create domain users for each SAP System. We are installing many test servers and trying to see if I can avoid creating domain user account for each system and use only one account to administer all test sap systems.
Just wanted to know if there is any way to have one domain SIDADM user id and one domain SAPService user account to run multiple test SAP systems?
Thanks,

Hi,
Multiple test system you have different SID. so you must use different SAPserviceSID user. But you can use one SIDADM user with the proper permission with other test systems.
I have used in OS400 environment with single SIDADM user id.
please check with users with permission sap notes or document.
But SAP not recommanded this.
Thanks and Regards,
Jibin.

Single invoice for multiple payment terms

Hi Friends,
I have given 2 different payment terms for 2 line items in single order and the billing is splitted due to this reason. I want to know where the system is checking this control. Because I want to create single Invoive even the payment terms are different. (The routine 003 under Data VBRK/VBRP in SO to Bill copy controls will be usefull only to create single Invoice for multiple SO's where the payment terms is same). But I need to create single Invoice even for multiple payment terms.
Can anyone suggest me at the earliest please.
Kumar

Hi Kumar,
The Billing Split is take care at Copy control level.
For multiple line items in one single SO, with different Payment terms is not acceptable as per the business logic and its not best practices.
Please suggest the business to go on Split method only.
Or
Try to use Proforma Invoice Concept.
Regards
Srini

Single invoice for multiple deliveries in Export scenario

Hi All
I am trying to create a single invoice for multiple deliveries. In case of Local Sales i am able to do it.
But when it comes to export sales the system is not allowing me to create Single invoice for 2 deliveries . This is a export scenario. Can you suggest... When i am checking the split invoice log it says split due to header data "Number of foreign trade data i"
Plz suggest.
Thanks
Rishi

Thanks G. Lakshmipathi
Resolved
As per the split analysis, System was checking the number generated for Foreign Trade data at delivery level.
As told i have Tried maintaining the Indication at copy control level VTFL "Redetermination of Foreign Trade Data at Billing level".
This has resolved my Issue.
Thanks Again
Rishi

Multiple SAP systems in MSCS

Hello,
We would like to install an ECC 6.0 and a CE in a cluster MSCS of two nodes.
I've found the SAP documentation "Installation of Multiple SAP Systems in MSCS: Oracle" but the doc version is 03/30/2007. Could you please tell me wether there is a new version of this document? or where can I find more documentation about this?
Is it recommended to create a domain between the cluster nodes? We're going to have 3 MSCS clusters with two systems in each cluster, should I create a domain for the three clusters, one domain per cluster or no domain at all?
Thanks and regards,
Ana.
Edited by: systems2111 on Feb 3, 2010 9:46 AM

Hello Shailesh,
The scenario is the following:
- MSCS between ECC and CE.
- MSCS between Solution Manager and nothing.
- MSCS between Websphere and SAP Business Objects
Every MSCS has two machines. for example, ECC will run on one machine, CE oon the other machine and in case of problems the cluster will run the ECC in the CE node.
I don't know if I have explain myself, but, anycase, please ask me with your doubts.
Regards,
Ana.

Multiple SAP systems in MSCS with Oracle

Hello,
We are going to install a BI instance in a MSCS cluster in which there is already a SAP system installed and clustered.
The SO is Windows 2008 and Oracle 10.2.0.4.
My problem is about the Oracle sw. In previous SAP releases there was a guide called "Installation of Multiple SAP systems in MSCS: Oracle".
For my release Netweaver 7.0. EHP1 SR1, there is no specific guide. All the references are the installation guide and part related to MSCS installation and a white paper about "new configuration of multiple SAP systems with Windows 2008 Failover Clustering".
In all that documents I haven't found what to do with the database. In the beginning of the installation documents says that Multiple Oracle_home for different database instances are not supported in an MSCS configuration. But in the pages related to the MSCS installation says "if required, set up multiple Oracle Homes".
So, what's the option? Multiple Oracle_homes or MCOD? Be in mind that I already have a SAP system in this cluster, so I already have an Oracle home c:\oracle\<SID>\102
Have you work in this scenario?
Thanks and best regards,
Ana.

Hi,
Officially SAP does not support Multiple SAP Systems in One MCSC Cluster. If such installation & configuration has been done by SAP Global Technology Partner then and then only SAP provide support.
what's the option? Multiple Oracle_homes or MCOD?
GO for multiple oracle_home , in which the same drive letter for oracle_home should be used on local disks in both MCSC cluster nodes. And the same oracle_home should be junctioned to the shared location on shared space.
The Chapter 7 High Availability with Microsoft Cluster Service of [Inst. Guide SAP NetWeaver 7.0 incl. EHP1 SR1|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000659894&_OBJECT=011000358700000353072009E] contains all the required information with detail. Refer it.
Regards,
Bhavik G. Shroff

Single ADS for multiple SAP systems ?

Similar Messages

Maybe you are looking for