Single Printing for Multiple ALVs in Splitter Containers

Hi,
I am creating multiple ALVs (3 to 4) of CL_GUI_ALV_GRID class in my report. The ALVs are being displayed inside the splitter containers of class CL_GUI_SPLITTER_CONTAINER. My question is how to print all the ALVs inside these multiple containers with a single execution? I've found a close answer to this at this thread but it is using the REUSE_ALV... function.
How to print multiple ALV Grids with only one print dialog?
Is there a way to do this by making use of the CL_GUI_ALV_GRID printing functionality, if there is?
Thanks for your kind attention,
Kamal.

-found alternative.

Similar Messages

  • Single Spool for multiple smart forms

    Hi,
    I am doing Cheque Printing  My multiple smart form in single spool
    I Created Single spool for multiple smartforms and i can able to see all the smart forms in single spool
    While I am printing smart form from spool it is taking only first page.
    Any inputs how to slove this.
    Regards
    Azeez
    Edited by: Rasheed salman on Feb 3, 2010 7:41 AM

    Hi,
    You can call Open Spool and Close Spool function modules. Between these two fm you can call your smartforms. Just have a look the procedure below.
    Call function OPEN_SPOOL.
                 Call function SM1
                 Call function SM2
                 Call function SM3
    Call function CLOSE_SPOOL.
    Hope this will resolve your issue.
    Thanks,
    Abhijit

  • Single  bill for multiple connections

    Dear All,
    Is it possible to print single bill for multiple connections ? This is my requirement Customer X having 2 connections for Water and 2 connections for Electricity.But we need to bill Electricity and water in a different bill ,but 2 connections for water and 2 connections for electricity should be billed in a single bill.We have created a separate contract accounts for 4 connections.
    Pls guide...
    Best Regards
    Jay

    Hi,
    I am not sure, if i completely understand your requirement.
    But as per my understanding, you have 4 installations, ( 2 for Water and 2 for Electricity) and you want to have a single invoice created for Electircity and water.
    So, its better to create a single contract account with multiple contracts.
    If you are creating multiple contract accounts, then it would create multiple invoices (one per contract account - regular scenario). So, please have a multiple contracts with single CA.
    Also, if you want to invoice all the contracts together, please find the option on contract for joint invoicing. (option 1).
    And, in case you want to bill two connections of electricity as one entity and two of water as one, so in this case, have two contract accounts one for Electricity and one as a part of water. And assign all the electricity contract to one CA and rest of water to another CA.
    Invoices are always created at contract account level and the billing documents are created at contract level.
    Hope this helps !!
    Regards,
    Rajesh Popat

  • Single invoice for multiple orders with different divisions

    Dear All,
    while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I  tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
    Thanks In advance
    Regards
    CNRNAIR

    Hello
    single invoice for multiple orders with "different divisions" invoice is getting split
    FYI - Different Division means different Sales Area.
    So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
    Thus, combining docs with different sales area is practically impossible.
    Provided, you are using common division.
    Hope this assist you,
    Thanks & REgards
    JP

  • Single invoice for multiple payment terms

    Hi Friends,
    I have given 2 different payment terms for 2 line items in single order and the billing is splitted due to this reason. I want to know where the system is checking this control. Because I want to create single Invoive even the payment terms are different. (The routine 003 under Data VBRK/VBRP in SO to Bill copy controls will be usefull only to create single Invoice for multiple SO's where the payment terms is same). But I need to create single Invoice even for multiple payment terms.
    Can anyone suggest me at the earliest please.
    Kumar

    Hi Kumar,
    The Billing Split is take care at Copy control level.
    For multiple line items in one single SO, with different Payment terms is not acceptable as per the  business logic and its not best practices.
    Please suggest the business to go on Split method only.
    Or
    Try to use Proforma Invoice Concept.
    Regards
    Srini

  • Single invoice for multiple deliveries in Export scenario

    Hi All
    I am trying to create a single invoice for multiple deliveries. In case of Local Sales i am able to do it.
    But when it comes to export sales the system is not allowing me to create Single invoice for 2 deliveries . This is a export scenario. Can you suggest... When  i am checking the split invoice log it says split due to header data "Number of foreign trade data i"
    Plz suggest.
    Thanks
    Rishi

    Thanks G. Lakshmipathi
    Resolved
    As per the split analysis, System was checking the number generated for Foreign Trade data at delivery level.
    As told  i have Tried maintaining the Indication at copy control level VTFL "Redetermination of Foreign Trade Data at Billing level".
    This has resolved my Issue.
    Thanks Again
    Rishi

  • Single invoice for Multiple Purchase Orders

    Hi,
    How to Park the single invoice for multiple purchase orders

    brother this is possible to enter one Invoice fro multiple purchase order.
    call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
    Thanks

  • Single spool for multiple smartforms

    Hi,
    I am using Function modules SSF_open and ssf_close for creating single spool for multiple smartforms but when i try to run the program in background then the job is getting cancelled...........and if i run the program in foreground then the program is running fine giving single spool for multiple forms........
    so the problem is that job should run in background if i run it in background instead job is getting cancelled.
    please tell me the solution how can i get the single spool for and multiple smartforms as well as the job should run if i am doing so.

    Moved to the correct forum

  • Reg:Single Check for Multiple Vendors

    Hi Experts,
    I want to Issue a Single check for all vendor open items...
    For this is I created one Group Key and assigned in the vendor master record, but while doing the payment separate check issuing for each vendor,
    any idea

    Hi,
    Can you check the below thread of urs.
    [Reg:Single Check for Multiple Vendors]
    In addition to the above, please make sure that in OBVU, the check box separate payment for each ref is deselected for your questioned comapny code.
    You would have continued your earlier thread instead, rather than a new thread.
    Thanks,
    Srinu

  • Single-signon for multiple sites or sub sites

    Does anyone know of some good articles/publications or suggestions for
    implementing a single signon for multiple very secure internet sites in
    weblogic type environments.
    For example, bank1 has a internet site and bank 2 has an internet site.
    Bank 2 has some cool features they want to offer bank1's customers. They
    agree but, bank1 wants to present bank2 as a tab or part of bank1 site.
    IN order to do this there are lots of fun things, but the things Im
    interested in are how to authenticate between them and handle timeouts.
    timeouts seem particularly tricky in that if I dont hit a page on bank2
    for a while, it could time out its session for the guy on bank1. Also if
    im in the bank2 section of the site, then bank1 could time me out as
    well.
    any ideas let me know.
    thanks
    Joel

    I've been informed ;-) that a pure Java solution is also available from
    Entegrity. So here are a couple of URLs for you to research
    anagrammatically:
    http://www.netegrity.com
    http://www.entegrity.com
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    Tangosol: How Weblogic applications are customized
    "Cameron Purdy" <[email protected]> wrote in message
    news:[email protected]...
    Netegrity?
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    Tangosol: How Weblogic applications are customized
    "Tim Funk" <[email protected]> wrote in message
    news:[email protected]...
    This is long winded and I tried to have this make sense, if it doesn't
    just mark this as read ...
    I am running into the same issue. Out of need, different applications
    need to be hosted on different boxes/JVM's/web applications. I am
    experimenting with a customer single sign on process which is
    independent of Java but lends itself nicely to it. Here is my thoughts:
    1) All applications need to run under the same domain. For example:
    foo.redrose.net, www.redrose.net, bar.redrose.net, app1.redrose.net
    all reside under redose.net.
    2) You have a database table (secure) that contains the following:
    user id, password, session id, last access time.
    3) This database table contains all of the valid sessions across the
    domain (in this exmaple .redrose.net)
    4) There is a daemon running which runs every ?? seconds that deletes
    any records older than ?? seconds/(or minutes/hours) in the
    database.
    5) There exist a cookie which is set to the domain level that contains
    the session id.
    6) The session id provides a way to obtain the id and password for the
    user to authenticate to the container. For example in WL5.1SP8 there
    exists: weblogic.servlet.security.ServletAuthentication.weak(...) to
    authenticate to your container. By using this you will get the
    capability of setting up your roles and ACLS etc in you web.xml and
    weblogic.xml to handle authorization.
    7) All requests to any applications participating in this philosophy
    must do the following for EVERY request (or appropriate):
    Even if you are logged authenticated to the container and authorized,
    you may have timed out or logged out of another application. So the
    database table must be checked to see if the session id exists. At the
    same time, you must also update the last access time to prevent timeout.
    8) If the user tries to access a different application which he has not
    authenticated to yet - the user will be forwarded to a servlet whichwill:
    a) Look for the cookie at the domain level
    b) If the cookie is found - get the UID and PWD from database
    b2) Present login form if cookie is invalid/not exists
    c) Authenticate to container
    d) Forward back to original page and let the container handle
    authorization since you have already authenticated.
    I use have encapsulated the database activity into 3 stored functions:
    1) isValidSession(session_id) - Returns null or the user id and pwd
    concatentated which will need split apart if needed
    2) makeSession(user_id, password) - Returns a new unique session id and
    creates the appropriate record
    3) cleanUpSessions() - Arguements not yet determined. This will delete
    any records older than a certain time. I would like to have the proc
    know what to delete without being given a parameter but time to the
    second level can be tricky for some DBMS's.
    There is a concern of storing the user id and password in the database
    but this can be eliminated with a good design to restrict access to the
    database table and using encrypted connections.
    Hope this helps. Hopefully - a similar philosphy will be adopted by an
    application container so I may not have to worry about this and I can go
    back programming business functionality.
    -Tim
    Joel Nylund wrote:
    Does anyone know of some good articles/publications or suggestions for
    implementing a single signon for multiple very secure internet sites
    in
    weblogic type environments.
    For example, bank1 has a internet site and bank 2 has an internetsite.
    Bank 2 has some cool features they want to offer bank1's customers.They
    agree but, bank1 wants to present bank2 as a tab or part of bank1site.
    IN order to do this there are lots of fun things, but the things Im
    interested in are how to authenticate between them and handletimeouts.
    >>>
    timeouts seem particularly tricky in that if I dont hit a page onbank2
    for a while, it could time out its session for the guy on bank1. Alsoif
    im in the bank2 section of the site, then bank1 could time me out as
    well.
    any ideas let me know.
    thanks
    Joel

  • Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

    Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
    Please help!!

    I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
    Add-PSSnapin "Microsoft.SharePoint.PowerShell"
    $sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
    $uri = new-object System.Uri("http://url/")
    $sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
    $sts.Update();
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • How to Park the single invoice for multiple purchase orders

    Hi,
    How to Park the single invoice for multiple purchase orders?

    brother this is possible to enter one Invoice fro multiple purchase order.
    call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
    Thanks

  • Single Receipt for multiple Customers

    We have a scenatio where there a multiple customer codes for different locations of the same customer. Say customer codes A B and C. A single receipt is received from the central processing location i.e. A and it contains invoices raised on all locations A B and C
    Entry cannot be passed through F-28 to enter and clear the open invoices.
    Is there a solution to this situation
    regards

    Hi,
    Through F-28 you can do multiple customer receipts with single receipt.  In the first screen of F-28, you have to give total amount received in the amount column then give first customer code then go to process open items select the open item, then choose process open items again it will ask for new customer code then give second customer code and process open items select open items in second customer this way you can process single receipt for multiple customers.
    Regards
    Sarma BH

  • Single login for multiple domains

    Can anyone point out a blog or post of a single login for
    multiple domains? For example, let's say I own asite.com and
    bsite.com.
    I want a user who logins to asite.com to also be logged into
    bsite.com if they visit that site. BSite.com is clearly a microsite
    of asite.com but we'd like to continue to use that domain if the
    visitor is on that site instead of redirecting them to keep login
    credentials
    Thanks

    If you're using cookie based login system, I'd imagine you
    could set a cookie to be valid for both of your sites.
    <cfcookie name="myAuthcookie" value="myAuthValue"
    domain=".asite.com;.bsite.com">
    That way both asite.com and bsite.com can read your cookie.
    Note the notation; always include the preceeding dot in the domain
    values. (two dots for top level domains, etc.)
    Strangely CFCOOKIE documentation doesn't mention anything
    about using semicolon separating multiple domains. It did in CF5
    documentation, but not since.

  • Single PR for multiple materials thru MRP

    Hi,
    Is there any setting to achieve a single PR, for multiple materials thru MRP?
    Regards,
    Sattuj

    Hi,
    I don't think it is possible to create single PR for Multiple materials through MRP.
    Depending upon the Lot size, Individual/collective Indicator in MRP 4 view, you can club the requirements for the same material and have a single PR.
    Hope this helps..
    Regards,
    Siva

Maybe you are looking for