Single question slide issue in captivate 6

Hi,
I am new to captivate 6. I need to achive following functionality:
1. Single check point question slide without result page which will be MCQ or any type of question.
Consider the sinario for MCQ question
2. If user doesnot select any option, he should be informed about the same (which is happening at my end but not more than 1 time even after the attempt count is infinite)
3. There should be next button in disable state
4. if user selects wrong answer and click submit, he should get wrong feedback without the whole screen patch. He will click on retry button to close the feedback and reset the question
5. if user click on right answer and click submit, he will get right feedback and next button will get enabled
6. This Question should reset everytime you visit the page.
Let me know if this is possible in captivate 6?
Thanks,
Omkar

Try clearing your browser cache.  You may not be seeing the current content.

Similar Messages

  • Question Slides OK in Captivate - Not so good in LMS

    Hi,
    I've just put together a Captivate course. Everything works
    quite well in project preview mode, but when I export to Southrock
    LMS - doom.
    When the quiz is running it does either of two things. It
    randomly freezes and marks the user as not competent, or kicks the
    user all together. There are only seven question slides and I have
    optimised these so they are smaller. Sometimes I can get right
    through the course with a result, other times only the second or
    third question.
    Please help - my boss is on my back!!!

    Just guessing, but assuming you're using SCORM, the Southrock
    LMS could be one of those products that has trouble with the
    frequency at which Captivate-generated SCORM files submit
    information.
    You might want to read through the following thread and see
    if anything sounds similar to the problems you're having:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=469&threadid =1294299
    If memory serves, the fix included at the end of the thread
    has helped fix problems with other LMS products besides
    Moodle.

  • How do you play a single question slide?

    I am working on a multiple choice question slide, and I want to play it, and it only, to test it out.  I have the options : play slide, project, next fives slides, from this slide.  When I select "play slide", Captivate somehow forgets the slide is interactive, and "plays" the slide without waiting for me to answer the question or interact with it.  How can I get the slide to act as if it were being played as part of the whole object ?
                 Ryan

    Hi there
    Expounding on what was said here.
    You did note that there are four types of preview.
    Play this slide
    Next X Slides
    Project
    In Web Browser
    When Play this slide is used, it is really only intended to check timing of objects to see if they are appearing and disappearing at the proper times. As you have noted it's not interactive.
    If you really want to play just the one slide, I would edit the preferences and configure the number of slides from 5 to 1 for the preview. Then use the "Next 1 Slides" option. (It will change depending on the number you opted to use.)
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Question Slide Issues

    Hiya,
    Firstly I have to revisit something that I know has been
    asked before:
    Is there no way to amend the default Question Slide Format or
    do we really have to format each question individually?
    Secondly, having gone through the pain of formatting each
    question, Backgrounds, text locations & colours etc. Is it
    possible to format the question review area? The default black
    & white jars horribly with our corporate background.
    Finally for now, the Review area itself - it does not seem to
    want to behave, it is not constrained by the placeholder that
    appears on the question slides? Do we need to give it the whole
    width of a slide to display itself without crashing into other
    onscreen elements?
    Cheers
    Mountainboy - sadly, miles away from a decent mountain right
    now....

    Hi MountainBoy
    Yes, each question must be formatted individually. However,
    if you would like to make the developers aware that you would like
    to see more customizability with these, please
    click
    here and complete the wish form.
    No way I'm aware of to influence the review area. See above.
    Cheers... Rick

  • Quiz slide issues in Captivate 4

    I am having functionality issues with quiz slides in Captivate 4. When taking the quiz, slides will randomly get stuck/grey out and the user has to click the back button and then go forward and the slide will then function correctly. This is not acceptable to the client, for obvious reasons. I have tried re-building the quiz slides (several times) and have also copied the entire project into a clean Captivate file. Nothing seems to make a difference and it is still completely random. I will preview the quiz over and over and sometimes it will work perfectly and then the next time it'll get stuck. This has only started occuring since I upgraded to Cp4. I have had to resort to not using Quiz slides at all and re-creating them with click boxes, but then I miss out on some of the needed functionality that the quiz slides provide (with feedback). I am pulling my hair out! Anyone else having trouble with this?

    Hello all
    I have been having the same issue and have spent a bunch of time with Adobe so this is what they sent me and so far my quizzes have been working and I have had no reports of any quiz's freezing up fingers crossed.
    This is the latest corospondence from Adobe I have recived.. hope it helps..
    Mike
    Adobe Systems Incorporated
    1.)Separate all of the different quiz type questions into separate pools
    and pull random questions from each pool.
    2.)Stop using the multiple choice slides with single correct answer only
    as it defeats the usability of the quiz module in Captivate
    3.)Verify that video card drivers are compatible with Windows XP.
    If you still think that it is the problem with Adobe Captivate then
    please perform the below mentioned steps;-
    1.) Recreate the Adobe Captivate preferences files.
    Recreate the Adobe Captivate preferences files to eliminate problems
    that a damaged preferences file might cause.
    To recreate the Adobe Captivate preferences files:
    1. Quit Adobe Captivate.
    2. In Windows Explorer, go to C:\Documents and
    Settings\[USERNAME]\Application Data\Adobe and move the "Adobe
    Captivate" folder to another location (for example, the Desktop).
    3. Start Adobe Captivate. Adobe Captivate creates new preferences
    files.

  • Question Slide Templates and importing

    I have a template with question slides and I've
    saved it as a cp file. I then attempted to import slides and
    objects from another project. It appears to be importing, and then
    the only slides I have are the originals. None of the new slides
    appear. ???

    Hi there mfubib
    Creating a template is simple. You may create one from
    scratch or you may choose to take any existing project and save it
    as a template.
    To create one from scratch, click File > Record/Create
    > New Project... > Other. You then set the size and whatnot
    and eventually end up in the editing environment. You then add the
    elements that you wish to have in your template. Once your template
    looks like you want, you follow what is outlined in the next
    section.
    To save any existing project as a template, click File >
    Save As... and when the Save As dialog appears, click the drop-down
    menu at the bottom and choose "Adobe Captivate Templates (*.cptl).
    I'm not sure what you mean with "Additional flexibility with
    question slide template with Captivate 3". There is no "template"
    per se. What we see with Captivate 3 and question slides is that we
    may now copy, paste, import and export Question slides. We may also
    randomize them by creating question pools and drawing random
    questions based on the pool. We may also shuffle answers as well as
    customize the buttons used. But that's about it as far as I can
    recall. Perhaps if you are able to articulate more about what it is
    you are wanting to do, we might better answer the question.
    Cheers... Rick

  • Question slide- Launch a full screen image in new window.

    Hi,
    I am using Captivate 4.
    In the question slide (MCQ/ Matching) I want to have a transparent button over a thumbnail image.
    On clicking this button, it lanches a full screen image in a new window.
    The student views the image and answers MCQ,  Matching (droplist)  on the main screen/slide of captivate.
    This new window can then be closed by clicking 'X' on top right corner of the window.
    How to do this?
    Thanks and regards
    Rajan

    Hi there
    Instead of a Transparent Button you should think instead about Click Boxes. But either way, Captivate doesn't allow Buttons or Click Boxes to be inserted on Question Slides.
    However, Captivate does allow you to insert Flash objects on Question slides. So you could develop a Flash object that would carry out the desired actions when clicked. Then insert the object on the Question slide.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Navigation issues with question slides in Captivate 6

    In earlier versions of Captivate (5.5) we have always been able to insert question slides into our projects as checkpoints and allow the user to freely navigate through the project and answer the checkpoint questions as often as they like. We have also been able to provide success and failure feedback popups for those question.
    In Captivate 6 we are seeing that question slides can apparently only be answered once and do not reset to be answered again the next time the user navigations to those slides. We want to allow the user to answer checkpoint questions as often as they like and we need to be able to provide success and failure feedback popups. We have tried every imaginable combination of setting with no success. Has anyone else been experiencing this or have a solution to this problem?
    Thanks,
    Vernon . . .

    When I run the same projects with the exact same settings side by side in Captivate 5 and Captivate 6, in the Cap 5 project I can navigate the project freely and answer the checkpoint questions repeatedly as often as I like. As I navigate the questions are reset and can be answered again every time I enter the question slides.
    In Cap 6 the questions are locked after the first answer and cannot be answered a second time. Even stranger is the fact that when tested using only a subset of the slides adjacent to the question slide (next 3) it works and does appear to reset the question allowing repeated answers, but it fails when the entire project is run.
    I have asked our other developers to test this and they are experiencing the same problem with their projects.
    The only difference I can see between the two projects is that the Quiz results slide in Cap 6 cannot be deleted whereas it does not exist in the Cap 5 project ???

  • Published Captivate 6 project freezes on slide immediately before the first question slide

    I am running both CP6 and CP7 on Windows 7.
    I am still working on projects created with Captivate 6 in Captivate 6.  However, since installing CP7, any projects that I edit and publish with CP6 freeze up on the slide just before the first question slide.
    Since I have only begun experiencing this issue since CP7 was installed, I am assuming that it is something to do with the fact that i have both versions (6 and 7) installed.
    The only solution I have found so far is to open and publish the project in CP7, but this is not ideal as the projects I am working on in CP6 are new versions of ones already published in SAP LSO and I am concerned that publishing new versions of my courses from a different CP version will cause issues in LSO.
    Any ideas why this might be happening?  Ideally, I would prefer to continue to use CP6 for existing projects and only use 7 for new projects.

    Hi there,
    Have you created those projects in CP 6 from Scratch?
    Can you check the complete version of CP 6 (Help > about Adobe Captivate), it should be 6.0.1.240 or 6.1.0.319.
    Can you test with a blank new project in CP 6 after running it as Administrator (Right Click on CP 6 icon, then select run as admin).
    Thanks.

  • [captivate 3] random question slide doesn't work

    hello,
    I'm noob in Captivate.
    I use Captivate demo (in french).
    I want to make a quizz for my students.
    So, I create a "question pool manager" with 1 pool project
    "reseau_locaux".
    This pool project have 13 questions.
    Then I click "slides" on the filmstrip, I add a "Random
    question slide" and I click on the "Question pool menu" to select
    my pool project "reseau_locaux"
    After generating project, I have only 1 question from my
    question pool project.
    I read the help guide but it's not help me.
    It gets me crazy...
    I hope you understand my english.
    thanks

    Welcome to our community, Anthony
    Basically you are doing everything right. I'm a bit unclear
    on what you were expecting to see. Perhaps it will help you if I
    explain how the Question Pools and Random Questions work.
    You define a pool of questions using the Question Pools
    Manager. You advise you have done that. So far so good.
    You then insert a Random Question Slide. When you insert one
    of these, you point the slide at a Question Pool. You advise that
    you have done that too.
    I'm guessing here that perhaps you expected that by inserting
    a single Random Question Slide you would end up presenting all 13
    questions from the pool. Just in random order?
    If so, that's not how it was designed to work. What happens
    is that a single random question from the pool is presented. If you
    desire to see all 13 of your questions, but in random order, you
    need to insert 13 Random Question Slides and point them at your
    Question Pool.
    You may wonder at this point if you do this, will it would be
    possible to see perhaps question 2 multiple times. And the answer
    to that is no. Once a question has been presented, it is removed
    from consideration in the pool. So after the first one is
    presented, Captivate randomizes from what remains in the pool.
    Hopefully that helps better explain it.
    Cheers... Rick

  • Can we send pre-test score (Pre-test question slide) and post test score (Question slide) both in lms from captivate?

    can we send pre-test score (Pre-test question slide) and post test score (Question slide) both in lms from captivate?

    Pretest score normally is not sent to the LMS. However it is stored in a system variable, you could use JS to send it.

  • Adobe Captivate 4 Playbar on a Question Slide

    I have a project created in Captivate 4 with two question slides.
    When I preview them, the playbar shows on these slides.
    Please let me know why the playbar is showing and how to turn it off.
    Thank you,
    David Gambal

    VJ and David,
    Be careful VJ when offering advice, variables are case sensitive and the correct system variable you are pointing at is:
       cpCmndShowPlaybar   (C not capitalized)
    It is available in the dropdown list for the simple actions (action accordion). Once you have hidden the playbar, you have to show it again on entering the first slide where you want to see it by changing its value again to 1.
    Lilybiri
    PS Sorry, forgot you are on CP4: the system variable is available in the Slide Properties, Navigation region:

  • Adobe Captivate 5 - Quiz stopping after leaving question slide to go backwards

    I'm trying to force Captivate to do something I think it wasn't designed to do - Force the user to get 100% on a quiz. I've set the attempts to 'infinite' and customized the retry messages with little bits of information for the user. Currently, they can try the question as many times as they want until they get it correct but they cannot leave the slide even though there is a 'back' button available! I need them to be able to leave the question slide after attempting to answer the question, sort back through the information slides to learn the information, and return to the question slide to answer it correctly. The quiz stops entirely if you go backwards, then attempt to get back to the question slides.
    Forcing them to retake the entire quiz is not an option as this will likely frustrate the user, especially as one of our presentations includes 100 questions. Even setting the failure levels to 3 is not good because eventually, someone will miss the question entirely and have to retake the quiz.
    Any suggestions? Can this be done?
    I have a short demo with all my settings if anyone wants to see it.

    Hello,
    Yep, you are bumping onto the limitations of the current default Quizzes. If you allow multiple attempts on Question level, the user will not be able to leave the slide without exhausting those attemps or having a correct answer. If you allow multiple attempts on Quiz level, the Retake button will delete all answers and the user has to redo the whole quiz.
    The only way I found was by creating my own question slides. I even succeeded in making Quiz Retake function only for incorrect answers. This is however a lot of work and when I read the amount of questions you are providing...
    Lilybiri

  • Question Slide won't export to Flash CS4 (Captivate 4)

    I'm using Captivate 4 and Flash CS4 in Windows.  I have built a short and simple 5-question quiz in Captivate, and I need to export it to Flash CS4.
    I have tried both opening the .cp file onto a new Flash stage, and exporting to Flash from inside Captivate.  Sometimes, Flash crashes.  Mostly, I get this error:
    The following elements in your project have not been converted.  They are not supported by this importer.
    Question Slide
    Since I'm basically using Captivate 4 as a quiz generator for this project, this is definitely a showstopper.  Any suggestions?
    Thanks in advance!

    Hi,
    There is no suport for quzzing for "Export to Flash" feature in Captivate 4.
    You can either publish the quiz as a SWF and add it into flash or use learning interactions which you get as templates in flash for ELearning Suite.
    Manoj

  • In Captivate 7, can you have more than one question on a question slide?

    Ultimately, I would like to have one question slide. On this question slide, I would like to have three separate Fill-in-the-Blank questions. The Fill-in-the-Blank questions would have drop-down lists of the answers. It would look something like this:
    1. Location: (Fill-in-the-Blank with Drop-down list)
    2. Religion: (Fill-in-the-Blank with Drop-down list)
    3. Ethnicity: (Fill-in-the-Blank with Drop-down list)
    Captivate appears to limit a question slide to one question. I have a feeling I will have to do some Flash animations to make this work and abandon the question slide altogether. Any help would be greatly appreciated. Thanks.
    - Nick Imholte

    You can have more than one blank word in a FIB question. But probably your
    problem is that the question will only be considered correct, and score
    given if all the words are correct. I recently explained a workaround at
    Devlearn, using scored TEB's.

Maybe you are looking for

  • Problem in extraction of the file.

    When trying the download of the browser I pressed run in run/save option. Later the computer screen shows the file is corrupt and the extraction fails. Pls,guide what shall I do to download the browser. == Operating system == windows

  • Dear Steve, will anything be done about this wireless connectivity issue?

    This is no fun whatsoever.... I am telling you - browsing interenet on iMac is no fun, seriously. I prepared a quick research for you: http://discussions.apple.com/thread.jspa?threadID=830426 http://discussions.apple.com/thread.jspa?threadID=834613 h

  • File Associations

    cc, w7,x64 Bridge decided to make my CS6 programs the default for all openable file types. This problem has been raised before but the answers, 1. go to preferences and change each file type manually; or 2. go into the registry and make a change, are

  • How to change a swatch color without losing the "global" status

    Hiya Forum! AppleScripting-Newbie talking. For an automated EPS-export using AppleScript and Illustrator CS4 on a G5 Mac running Mac OS X I need to change a global swatch's color. It needs to go form black:75 to black:55 and remain global, thereby ch

  • Can i get memory map to work on my 5800 ?

    the instructions say your phone must have windows sync 3.7 (iirc) and you can plug in mobile and get it working. i have all the software on my comupter but it cant see my phone