Single R/3 system feed 2 bw systems
Hi Experts:
We have a scenario where a single consolidated R/3 system will be feeding 2 BW systems (Europe and Americas).
We have some common extractors used for both BW systems.
I need to find out how do we handle the Delta Mechanism for the extractors.
If you can also send us any lessons learned for such type of scenario
Any input woudl be appreciated.
Thank you
HI Biral,
As long as the Logical Systems names are different for different BW systems, the Deltas will handle very well.
The delta Queue depends on the Target System. SO, there will be seperate Deltas for seperate Target Systems. You, as a developer doesn't nned to do anything here, the systems takes care of itself.
U.P.Ram Chamarthy
Message was edited by:
U.P. Chamarthy
Similar Messages
-
One source system feeding multiple BW systems?
Is it possible to have the same source R/3 system feed multiple BW systems? It doesn't seem likely to me. I would think delta's would get confused. However I might be missing something.
Regards
SteveSteve, of course it is possible to connect multiple BW systems to your R/3 system. You need to create a separate RFC connection for each BW system in R/3 (tcode SM59). The delta queues are set up per RFC connection (as you can see in RSA7). When you perform the initialization infopackage in each BW system, a corresponding delta queue will be setup in R/3.
Hope this helps. -
How to do data migration between single node and multi node HANA systems ?
Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ? -
Single BPEL process to server different system?
Hi All,
I have one source system and have three target system.
Source System - S1 (Oracle System)
Target System - T1, T2, T3 (oracle System)
I need to pass supplier data from S1 to T1, T2, T3.
I need to create only one single BPEL process to acheive this.
Current design is to transfer data from S1 to T1, T2, T3 using database adapter (Having three db adpater and passing same payload to three).
I am not happy with the design to have three adpater (say if we have 10 different system then we may need 10 adapter). Can anybody please suggest any other way around using BPEL or ESB.
Thanks and Regards,
SreejitExample Assignment
<assign name="Init_InsertStagingData">
<copy>
<from expression="/eis/DB/TEST_UK"/>
<to variable="endpointReference"
query="/ns3:EndpointReference/ns3:Address"/>
</copy>
<copy>
<from variable="endpointReference"/>
<to partnerLink="InsertStagingData"/>
</copy>
</assign>
Endpoint Reference Schema
<element name="EndpointReference">
<complexType>
<sequence>
<element name="Address" type="string" minOccurs="0" nillable="true" />
</sequence>
</complexType>
</element>
--Prasanna -
I am planning buy an individual package of adobe creative cloud. Can i use single license in two of my system?
Hi Elbethel,
A single license of Adobe Creative Cloud can be installed and activated on 2 machines for personal use.
Regards,
Anand -
Logical Systems vs Cross Systems
Dear all,
I have two physical SAP ERP systems grouped under one logical system.
Now I want to connect to a third SAP ERP system in order to execute Cross System analysis between the systems under the logical system and the new third system.
I understand that I cannot do a Cross System RA on systems of the same logical system so that´s the reason why I need to set up the third system as a single new ERP system.
Anyhow the new ERP system should use the same rule set than the two systems of the logical system.
So I´d just like to set up the new system connector for the GRC 5.3 but I do not want to load the same rules again for the new ERP system, etc.
Is this possible? I tried to create a new logical system containing the new ERP system and regenerate the rules for the logical systems. But after that no simple RA is possible for the new ERP system.
Thanks for any advice and regards,
Markus RichterHello Markus,
Yes, you are right that you can not include the third system in the same logical group if you wish to use it for cross-system analysis. If you choose to have this as a stand alone system in RAR then first you will have to upload the rules for this stand alone system in RAR. The rules loaded for logical system will not work for this system as it is not part of the logical system group.
Regards, Varun -
Importing BAPI Signatures from Backend System to ABAP System
Dear Friends,
I wanted to Import several BAPI (RFC Enabled) Signatures from Backend System (ABAP System) to ABAP System. Is there any tool or Transaction in SAP to do import in single shot?
Please let me know if anyone know the procedure.
Thanks and Regards,
PrasadHi Ben,
Tell the client that, HRusers are not considered as R/3 users by SAP.
HRUSERS can only execute ESS related services and it is created using transaction HRUSER. ( Though HRUSER creates user in su01).
License for ess users and R/3 users are different and sold seperately by SAP.
If u have ESS user licence, u can create a user in R/3 and in EP. But this user in R/3 should have access to ESS / MSS services only.
Cheers!!
Ashutosh -
Error while reading the PO in the Backend system. Inform system admin
Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
TejaI am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna -
Logical system and business system
Hi experts, please help me with the below questions---
1) What is the diff between logical system and business system?
2)what is the difference between logical system(defined in R/3) and business system (defined in SLD) in idoc to file scenario.
3) Is it require to give the logical system name of the xi server(Which we define in idx1 port) to the 3rd party system(Application system at the FTP side) to carry out file to idoc scerario?Hi,
Business System :
1. Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems. Depending on the associated technical system.
2. Business Systems should be mandatory used when dealing with Idoc's and Proxies .
Business Service:
1. Business Service requires manual adding on Inbound and Outbound Interfaces, Business Systems do not.
2. Business Services are maintained across environments and so, their names cannot be changed. Business Systems names can be changed across environments by providing SLD level transport targets.
3.In the Business Services we cannot maintain the Group and Targets in SLD. For Ease in transporting your ID/Configuration objects Groups and Targets are used in SLD for Business Systems.
4.Business Service has no SLD Entries and No Assigned Products and SWCV's
Regards
Sangeetha -
Technical systems and Business systems in SAP XI
can any one tell me ,breifly explain the diff b/w <b>Technical Systems</b> & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
Ajay Kumar -
XI testing for two SAP R/3 systems with same system id/logical system
Hi
We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to ECC 6.0) are copy of respective systems and these systems are created automatically under technical systems in SLD by auto update (RZ70).
The question is, can we use the same XI system for testing inbound/outbound interfaces for both the systems i.e 4.7 & ECC 6.0 at the same time. I am aware of the fact that XI Technical/Business sytems dependent on unique logical systems, so we cannot create new business system for the upgraded DEV-II ECC 6.0 system.
For your information, we have two slds (one for XID/XIQ and second one for XIP).
What are the options without disturbing & maintaining the current XI system set up?
1) Can we change current Business systems e.g DEV010 to use new technical system i.e DEV-II ECC 6.0 for testing for a period and switch it back to DEV-I 4.7 technical system?
2) or change logitical system name of DEV-II ECC 6.0 and create new business sytem in SLD without interfering the existing setup and modify/create interfaces to use this new business system?
3) Do we need to refresh cache from time to time in XI ?
4) Any other implications
We will be upgrading XI to PI 7.1 after ECC 6. 0 Upgrade.
Any views on this would be highly appreciated.
Regards
ChanduHi
Technical System was created in the SLD automatically after RZ70 configuration in the new DEV-II system. We then modified Business System to use the new Technical system and carried out following steps:
1) Original Idoc metadata was deleted from XID
2) The port definition was deleted
3) A new port definition was created for new system
4) The metadata for each idoc type used was re-created in IDX2 , using METADATA -> CREATE
5) This brought in all known versions of the idoc segments, including the 7.1 version.
I have already checked the guides suggested for our upgrade and we are thinking of going ahead with fresh installation and migrating the interfaces.
Regards
Chandu -
Data Migration from Legacy system to ECC systems via ETL through SAP PI
Hi All,
I wanted to know if we can migrate the data from Legacy systems to ECC systems via PI.
What I understand is there is ETL tool is used to extract the data from legacy system, and what client is looking to load that data via PI?
Can we do that ? I am concerned because this will involve mass data?
If I have to use PI , I see option of PROXY / IDOC /FILE as receiver in ECC system (take the data from ETL)?
Can somebody has done this earlier , please share the approach.
Thanks,
Pushkar PatelHi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha -
Logical System Conversion after system refresh failed
Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started 00 516 S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD) 00 550 S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system PO 349 I
02/18/2009 16:10:19 Job finished 00 517 S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
MaheshHi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks. -
How to get data in the remote system from local system.
Hi everybody,
I have developed four classes.
FileInterface.java:-
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface FileInterface extends Remote {
public byte[] downloadFile(String fileName) throws
RemoteException;
FileServer.java:-
import java.io.*;
import java.rmi.*;
public class FileServer {
public static void main(String argv[]) {
if(System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
FileInterface fi = new FileImpl("FileServer");
Naming.rebind("//10.161.15.219/FileServer", fi);
} catch(Exception e) {
System.out.println("FileServer: "+e.getMessage());
e.printStackTrace();
FileImpl.java:-
import java.io.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class FileImpl extends UnicastRemoteObject
implements FileInterface {
private String name;
public FileImpl(String s) throws RemoteException{
super();
name = s;
public byte[] downloadFile(String fileName){
try {
File file = new File(fileName);
byte buffer[] = new byte[(int)file.length()];
BufferedInputStream input = new
BufferedInputStream(new FileInputStream(fileName));
input.read(buffer,0,buffer.length);
input.close();
return(buffer);
} catch(Exception e){
System.out.println("FileImpl: "+e.getMessage());
e.printStackTrace();
return(null);
FileClient.java:-
import java.io.*;
import java.rmi.*;
public class FileClient{
public static void main(String argv[]) {
if(argv.length != 2) {
System.out.println("Usage: java FileClient fileName machineName");
System.exit(0);
try {
String name = "//" + argv[1] + "/FileServer";
FileInterface fi = (FileInterface) Naming.lookup(name);
byte[] filedata = fi.downloadFile(argv[0]);
File file = new File(argv[0]);
BufferedOutputStream output = new
BufferedOutputStream(new FileOutputStream(file.getName()));
output.write(filedata,0,filedata.length);
output.flush();
output.close();
} catch(Exception e) {
System.err.println("FileServer exception: "+ e.getMessage());
e.printStackTrace();
After that when i compile classes when i give the command as
rmic FileImpl
in command prompt error is coming like this.
error: Class FileImpl not found.
*1 error*
Can anyone help me please,urgent.It is generating stub and skeleton classes but when iam running FileClient after starting rmiregistry,it is coming something like
FileServer exception: FileServer
java.rmi.NotBoundException: FileServer
at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:375)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:240)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at java.rmi.Naming.lookup(Naming.java:84)
at FileClient.main(FileClient.java:9)
Can u help me -
How to call an EXE file on a remote system from SAP system?
Hi Friends,
I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
Thanx in advance,
RamHi Ram,
Try this
SXPG_COMMAND_EXECUTE
Reward if this helps,
Satish -
Error while registering SAP ECC system in UWL systems
hi,
Error while registering SAP ECC system in UWL systems.
Errors:
System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '132.147.0.112:sapgw00' not reached
TIME Thu Nov 27 16:12:05 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER 2
Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
After configuration changes in the backend system, you must re-register the system.
regards.
Srinivas.Hi,
you can check few things prior proceeding:
Does your connector test after adding your backend system in portal works fine?
Did you define a system alias?
Make sure your SSO is working,
Also check your Jco detination webdynpro tab.
Regards,
Vamshi.
Maybe you are looking for
-
I'm trying to download an app that's only available on iTunes. I've downloaded iTunes.exe but it will not open on Blackberry passport. Is there a specific .exe version that I need to download?
-
Will adding RAM to my Mac Mini make it run faster ?
Hey all, Since I upgraded to Mavericks, I've started having two issues with my Mac Mini (mid-2011 edition, with 4Gb of RAM and an Intel i5 processor at 2,5Ghz) 1. I use FileVault so I need to login as soon as my machine will boot. Unfortunately, afte
-
Lumia 520 : No new features added after amber upda...
I updated my Lumia 520 through OTA. After the process I could not find any new features and the about section does not show "Amber". What should I do?
-
Actual Line Items - WBS : Table
Hi, I want to know the actual line items of a WBS element. Can someone help me with the table where i can get the details. Thanks in Advance, Safi
-
Too many contacts = sms problems
Hi, i bought and 16GB iPhone last week and i'm having some problems with SMS. When I click on the SMS, it takes about 40 seconds to open (when it opens, because normally just returns to the home screen), everything is really slow (opening conversatio